-@c Copyright (C) 1991-2018 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2019 Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@c man end
@code{bdver3},
@code{bdver4},
@code{znver1},
+@code{znver2},
@code{btver1},
@code{btver2},
@code{generic32} and
@code{no287},
@code{no387},
@code{no687},
+@code{cmov},
+@code{nocmov},
+@code{fxsr},
+@code{nofxsr},
@code{mmx},
@code{nommx},
@code{sse},
@code{clwb},
@code{movdiri},
@code{movdir64b},
+@code{enqcmd},
@code{avx512f},
@code{avx512cd},
@code{avx512er},
@code{avx512_vbmi2},
@code{avx512_vnni},
@code{avx512_bitalg},
+@code{avx512_bf16},
@code{noavx512f},
@code{noavx512cd},
@code{noavx512er},
@code{noavx512_vbmi2},
@code{noavx512_vnni},
@code{noavx512_bitalg},
+@code{noavx512_vp2intersect},
+@code{noavx512_bf16},
+@code{noenqcmd},
@code{vmx},
@code{vmfunc},
@code{smx},
@code{pconfig},
@code{waitpkg},
@code{cldemote},
+@code{rdpru},
+@code{mcommit},
@code{lwp},
@code{fma4},
@code{xop},
@option{-mavxscalar=@var{256}} will encode scalar AVX instructions
with 256bit vector length.
+WARNING: Don't use this for production code - due to CPU errata the
+resulting code may not work on certain models.
+
+@cindex @samp{-mvexwig=} option, i386
+@cindex @samp{-mvexwig=} option, x86-64
+@item -mvexwig=@var{0}
+@itemx -mvexwig=@var{1}
+These options control how the assembler should encode VEX.W-ignored (WIG)
+VEX instructions. @option{-mvexwig=@var{0}} will encode WIG VEX
+instructions with vex.w = 0, which is the default.
+@option{-mvexwig=@var{1}} will encode WIG EVEX instructions with
+vex.w = 1.
+
+WARNING: Don't use this for production code - due to CPU errata the
+resulting code may not work on certain models.
+
@cindex @samp{-mevexlig=} option, i386
@cindex @samp{-mevexlig=} option, x86-64
@item -mevexlig=@var{128}
relocations. The default can be controlled by a configure option
@option{--enable-x86-relax-relocations}.
+@cindex @samp{-malign-branch-boundary=} option, i386
+@cindex @samp{-malign-branch-boundary=} option, x86-64
+@item -malign-branch-boundary=@var{NUM}
+This option controls how the assembler should align branches with segment
+prefixes or NOP. @var{NUM} must be a power of 2. It should be 0 or
+no less than 16. Branches will be aligned within @var{NUM} byte
+boundary. @option{-malign-branch-boundary=0}, which is the default,
+doesn't align branches.
+
+@cindex @samp{-malign-branch=} option, i386
+@cindex @samp{-malign-branch=} option, x86-64
+@item -malign-branch=@var{TYPE}[+@var{TYPE}...]
+This option specifies types of branches to align. @var{TYPE} is
+combination of @samp{jcc}, which aligns conditional jumps,
+@samp{fused}, which aligns fused conditional jumps, @samp{jmp},
+which aligns unconditional jumps, @samp{call} which aligns calls,
+@samp{ret}, which aligns rets, @samp{indirect}, which aligns indirect
+jumps and calls. The default is @option{-malign-branch=jcc+fused+jmp}.
+
+@cindex @samp{-malign-branch-prefix-size=} option, i386
+@cindex @samp{-malign-branch-prefix-size=} option, x86-64
+@item -malign-branch-prefix-size=@var{NUM}
+This option specifies the maximum number of prefixes on an instruction
+to align branches. @var{NUM} should be between 0 and 5. The default
+@var{NUM} is 5.
+
+@cindex @samp{-mx86-used-note=} option, i386
+@cindex @samp{-mx86-used-note=} option, x86-64
+@item -mx86-used-note=@var{no}
+@itemx -mx86-used-note=@var{yes}
+These options control whether the assembler should generate
+GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_FEATURE_2_USED
+GNU property notes. The default can be controlled by the
+@option{--enable-x86-used-note} configure option.
+
@cindex @samp{-mevexrcig=} option, i386
@cindex @samp{-mevexrcig=} option, x86-64
@item -mevexrcig=@var{rne}
Optimize instruction encoding with smaller instruction size. @samp{-O}
and @samp{-O1} encode 64-bit register load instructions with 64-bit
immediate as 32-bit register load instructions with 31-bit or 32-bits
-immediates and encode 64-bit register clearing instructions with 32-bit
-register clearing instructions. @samp{-O2} includes @samp{-O1}
-optimization plus encodes 256-bit and 512-bit vector register clearing
-instructions with 128-bit vector register clearing instructions.
+immediates, encode 64-bit register clearing instructions with 32-bit
+register clearing instructions, encode 256-bit/512-bit VEX/EVEX vector
+register clearing instructions with 128-bit VEX vector register
+clearing instructions, encode 128-bit/256-bit EVEX vector
+register load/store instructions with VEX vector register load/store
+instructions, and encode 128-bit/256-bit EVEX packed integer logical
+instructions with 128-bit/256-bit VEX packed integer logical.
+
+@samp{-O2} includes @samp{-O1} optimization plus encodes
+256-bit/512-bit EVEX vector register clearing instructions with 128-bit
+EVEX vector register clearing instructions. In 64-bit mode VEX encoded
+instructions with commutative source operands will also have their
+source operands swapped if this allows using the 2-byte VEX prefix form
+instead of the 3-byte one. Certain forms of AND as well as OR with the
+same (register) operand specified twice will also be changed to TEST.
+
@samp{-Os} includes @samp{-O2} optimization plus encodes 16-bit, 32-bit
and 64-bit register tests with immediate as 8-bit register test with
immediate. @samp{-O0} turns off this optimization.
amount of space, and it is only available for ELF based x86_64
targets.
+@cindex @code{value} directive
+@item .value @var{expression} [, @var{expression}]
+This directive behaves in the same way as the @code{.short} directive,
+taking a series of comma separated expressions and storing them as
+two-byte wide values into the current section.
+
@c FIXME: Document other x86 specific directives ? Eg: .code16gcc,
@end table
In AT&T syntax the size of memory operands is determined from the last
character of the instruction mnemonic. Mnemonic suffixes of @samp{b},
@samp{w}, @samp{l} and @samp{q} specify byte (8-bit), word (16-bit), long
-(32-bit) and quadruple word (64-bit) memory references. Intel syntax accomplishes
-this by prefixing memory operands (@emph{not} the instruction mnemonics) with
-@samp{byte ptr}, @samp{word ptr}, @samp{dword ptr} and @samp{qword ptr}. Thus,
-Intel @samp{mov al, byte ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T
-syntax.
+(32-bit) and quadruple word (64-bit) memory references. Mnemonic suffixes
+of @samp{x}, @samp{y} and @samp{z} specify xmm (128-bit vector), ymm
+(256-bit vector) and zmm (512-bit vector) memory references, only when there's
+no other way to disambiguate an instruction. Intel syntax accomplishes this by
+prefixing memory operands (@emph{not} the instruction mnemonics) with
+@samp{byte ptr}, @samp{word ptr}, @samp{dword ptr}, @samp{qword ptr},
+@samp{xmmword ptr}, @samp{ymmword ptr} and @samp{zmmword ptr}. Thus, Intel
+syntax @samp{mov al, byte ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T
+syntax. In Intel syntax, @samp{fword ptr}, @samp{tbyte ptr} and
+@samp{oword ptr} specify 48-bit, 80-bit and 128-bit memory references.
In 64-bit code, @samp{movabs} can be used to encode the @samp{mov}
instruction with the 64-bit displacement or immediate operand.
logical line number directive (@pxref{Comments}) or a preprocessor
control command (@pxref{Preprocessing}).
-If the @option{--divide} command line option has not been specified
+If the @option{--divide} command-line option has not been specified
then the @samp{/} character appearing anywhere on a line also
introduces a line comment.
@item @samp{i486} @tab @samp{i586} @tab @samp{i686} @tab @samp{pentium}
@item @samp{pentiumpro} @tab @samp{pentiumii} @tab @samp{pentiumiii} @tab @samp{pentium4}
@item @samp{prescott} @tab @samp{nocona} @tab @samp{core} @tab @samp{core2}
-@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om} @samp{iamcu}
+@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om} @tab @samp{iamcu}
@item @samp{k6} @tab @samp{k6_2} @tab @samp{athlon} @tab @samp{k8}
@item @samp{amdfam10} @tab @samp{bdver1} @tab @samp{bdver2} @tab @samp{bdver3}
-@item @samp{bdver4} @tab @samp{znver1} @tab @samp{btver1} @tab @samp{btver2}
-@item @samp{generic32} @tab @samp{generic64}
-@item @samp{.mmx} @tab @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
+@item @samp{bdver4} @tab @samp{znver1} @tab @samp{znver2} @tab @samp{btver1}
+@item @samp{btver2} @tab @samp{generic32} @tab @samp{generic64}
+@item @samp{.cmov} @tab @samp{.fxsr} @tab @samp{.mmx}
+@item @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
@item @samp{.ssse3} @tab @samp{.sse4.1} @tab @samp{.sse4.2} @tab @samp{.sse4}
@item @samp{.avx} @tab @samp{.vmx} @tab @samp{.smx} @tab @samp{.ept}
@item @samp{.clflush} @tab @samp{.movbe} @tab @samp{.xsave} @tab @samp{.xsaveopt}
@item @samp{.avx512vl} @tab @samp{.avx512bw} @tab @samp{.avx512dq} @tab @samp{.avx512ifma}
@item @samp{.avx512vbmi} @tab @samp{.avx512_4fmaps} @tab @samp{.avx512_4vnniw}
@item @samp{.avx512_vpopcntdq} @tab @samp{.avx512_vbmi2} @tab @samp{.avx512_vnni}
-@item @samp{.avx512_bitalg}
+@item @samp{.avx512_bitalg} @tab @samp{.avx512_bf16} @tab @samp{.avx512_vp2intersect}
@item @samp{.clwb} @tab @samp{.rdpid} @tab @samp{.ptwrite} @tab @item @samp{.ibt}
@item @samp{.wbnoinvd} @tab @samp{.pconfig} @tab @samp{.waitpkg} @tab @samp{.cldemote}
@item @samp{.shstk} @tab @samp{.gfni} @tab @samp{.vaes} @tab @samp{.vpclmulqdq}
-@item @samp{.movdiri} @tab @samp{.movdir64b}
+@item @samp{.movdiri} @tab @samp{.movdir64b} @tab @samp{.enqcmd}
@item @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.sse4a} @tab @samp{.sse5}
@item @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme} @tab @samp{.abm}
@item @samp{.lwp} @tab @samp{.fma4} @tab @samp{.xop} @tab @samp{.cx16}
-@item @samp{.padlock} @tab @samp{.clzero} @tab @samp{.mwaitx}
+@item @samp{.padlock} @tab @samp{.clzero} @tab @samp{.mwaitx} @tab @samp{.rdpru}
+@item @samp{.mcommit}
@end multitable
Apart from the warning, there are only two other effects on
projects / deliverable / binutils-gdb.git / blobdiff