-@c Copyright (C) 1991-2014 Free Software Foundation, Inc.
+@c Copyright (C) 1991-2019 Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@c man end
@item -n
By default, x86 GAS replaces multiple nop instructions used for
alignment within code sections with multi-byte nop instructions such
-as leal 0(%esi,1),%esi. This switch disables the optimization.
+as leal 0(%esi,1),%esi. This switch disables the optimization if a single
+byte nop (0x90) is explicitly specified as the fill byte for alignment.
@cindex @samp{--divide} option, i386
@item --divide
@code{corei7},
@code{l1om},
@code{k1om},
+@code{iamcu},
@code{k6},
@code{k6_2},
@code{athlon},
@code{bdver2},
@code{bdver3},
@code{bdver4},
+@code{znver1},
+@code{znver2},
@code{btver1},
@code{btver2},
@code{generic32} and
@code{8087},
@code{287},
@code{387},
+@code{687},
@code{no87},
+@code{no287},
+@code{no387},
+@code{no687},
+@code{cmov},
+@code{nocmov},
+@code{fxsr},
+@code{nofxsr},
@code{mmx},
@code{nommx},
@code{sse},
@code{sse4.2},
@code{sse4},
@code{nosse},
+@code{nosse2},
+@code{nosse3},
+@code{nossse3},
+@code{nosse4.1},
+@code{nosse4.2},
+@code{nosse4},
@code{avx},
@code{avx2},
+@code{noavx},
+@code{noavx2},
@code{adx},
@code{rdseed},
@code{prfchw},
@code{smap},
@code{mpx},
@code{sha},
+@code{rdpid},
+@code{ptwrite},
+@code{cet},
+@code{gfni},
+@code{vaes},
+@code{vpclmulqdq},
+@code{prefetchwt1},
+@code{clflushopt},
+@code{se1},
+@code{clwb},
+@code{movdiri},
+@code{movdir64b},
+@code{enqcmd},
@code{avx512f},
@code{avx512cd},
@code{avx512er},
@code{avx512pf},
-@code{noavx},
+@code{avx512vl},
+@code{avx512bw},
+@code{avx512dq},
+@code{avx512ifma},
+@code{avx512vbmi},
+@code{avx512_4fmaps},
+@code{avx512_4vnniw},
+@code{avx512_vpopcntdq},
+@code{avx512_vbmi2},
+@code{avx512_vnni},
+@code{avx512_bitalg},
+@code{avx512_bf16},
+@code{noavx512f},
+@code{noavx512cd},
+@code{noavx512er},
+@code{noavx512pf},
+@code{noavx512vl},
+@code{noavx512bw},
+@code{noavx512dq},
+@code{noavx512ifma},
+@code{noavx512vbmi},
+@code{noavx512_4fmaps},
+@code{noavx512_4vnniw},
+@code{noavx512_vpopcntdq},
+@code{noavx512_vbmi2},
+@code{noavx512_vnni},
+@code{noavx512_bitalg},
+@code{noavx512_vp2intersect},
+@code{noavx512_bf16},
+@code{noenqcmd},
@code{vmx},
@code{vmfunc},
@code{smx},
@code{xsave},
@code{xsaveopt},
+@code{xsavec},
+@code{xsaves},
@code{aes},
@code{pclmul},
@code{fsgsbase},
@code{rtm},
@code{invpcid},
@code{clflush},
+@code{mwaitx},
+@code{clzero},
+@code{wbnoinvd},
+@code{pconfig},
+@code{waitpkg},
+@code{cldemote},
+@code{rdpru},
+@code{mcommit},
@code{lwp},
@code{fma4},
@code{xop},
@code{svme},
@code{abm} and
@code{padlock}.
-@code{avx512dq},
-@code{avx512bw},
-@code{avx512vl},
Note that rather than extending a basic instruction set, the extension
mnemonics starting with @code{no} revoke the respective functionality.
@option{-mavxscalar=@var{256}} will encode scalar AVX instructions
with 256bit vector length.
+WARNING: Don't use this for production code - due to CPU errata the
+resulting code may not work on certain models.
+
+@cindex @samp{-mvexwig=} option, i386
+@cindex @samp{-mvexwig=} option, x86-64
+@item -mvexwig=@var{0}
+@itemx -mvexwig=@var{1}
+These options control how the assembler should encode VEX.W-ignored (WIG)
+VEX instructions. @option{-mvexwig=@var{0}} will encode WIG VEX
+instructions with vex.w = 0, which is the default.
+@option{-mvexwig=@var{1}} will encode WIG EVEX instructions with
+vex.w = 1.
+
+WARNING: Don't use this for production code - due to CPU errata the
+resulting code may not work on certain models.
+
@cindex @samp{-mevexlig=} option, i386
@cindex @samp{-mevexlig=} option, x86-64
@item -mevexlig=@var{128}
@cindex @samp{-mnaked-reg} option, i386
@cindex @samp{-mnaked-reg} option, x86-64
@item -mnaked-reg
-This opetion specifies that registers don't require a @samp{%} prefix.
+This option specifies that registers don't require a @samp{%} prefix.
The @code{.att_syntax} and @code{.intel_syntax} directives will take precedent.
@cindex @samp{-madd-bnd-prefix} option, i386
This option forces the assembler to add BND prefix to all branches, even
if such prefix was not explicitly specified in the source code.
+@cindex @samp{-mshared} option, i386
+@cindex @samp{-mshared} option, x86-64
+@item -mno-shared
+On ELF target, the assembler normally optimizes out non-PLT relocations
+against defined non-weak global branch targets with default visibility.
+The @samp{-mshared} option tells the assembler to generate code which
+may go into a shared library where all non-weak global branch targets
+with default visibility can be preempted. The resulting code is
+slightly bigger. This option only affects the handling of branch
+instructions.
+
@cindex @samp{-mbig-obj} option, x86-64
@item -mbig-obj
On x86-64 PE/COFF target this option forces the use of big object file
format, which allows more than 32768 sections.
+@cindex @samp{-momit-lock-prefix=} option, i386
+@cindex @samp{-momit-lock-prefix=} option, x86-64
+@item -momit-lock-prefix=@var{no}
+@itemx -momit-lock-prefix=@var{yes}
+These options control how the assembler should encode lock prefix.
+This option is intended as a workaround for processors, that fail on
+lock prefix. This option can only be safely used with single-core,
+single-thread computers
+@option{-momit-lock-prefix=@var{yes}} will omit all lock prefixes.
+@option{-momit-lock-prefix=@var{no}} will encode lock prefix as usual,
+which is the default.
+
+@cindex @samp{-mfence-as-lock-add=} option, i386
+@cindex @samp{-mfence-as-lock-add=} option, x86-64
+@item -mfence-as-lock-add=@var{no}
+@itemx -mfence-as-lock-add=@var{yes}
+These options control how the assembler should encode lfence, mfence and
+sfence.
+@option{-mfence-as-lock-add=@var{yes}} will encode lfence, mfence and
+sfence as @samp{lock addl $0x0, (%rsp)} in 64-bit mode and
+@samp{lock addl $0x0, (%esp)} in 32-bit mode.
+@option{-mfence-as-lock-add=@var{no}} will encode lfence, mfence and
+sfence as usual, which is the default.
+
+@cindex @samp{-mrelax-relocations=} option, i386
+@cindex @samp{-mrelax-relocations=} option, x86-64
+@item -mrelax-relocations=@var{no}
+@itemx -mrelax-relocations=@var{yes}
+These options control whether the assembler should generate relax
+relocations, R_386_GOT32X, in 32-bit mode, or R_X86_64_GOTPCRELX and
+R_X86_64_REX_GOTPCRELX, in 64-bit mode.
+@option{-mrelax-relocations=@var{yes}} will generate relax relocations.
+@option{-mrelax-relocations=@var{no}} will not generate relax
+relocations. The default can be controlled by a configure option
+@option{--enable-x86-relax-relocations}.
+
+@cindex @samp{-malign-branch-boundary=} option, i386
+@cindex @samp{-malign-branch-boundary=} option, x86-64
+@item -malign-branch-boundary=@var{NUM}
+This option controls how the assembler should align branches with segment
+prefixes or NOP. @var{NUM} must be a power of 2. It should be 0 or
+no less than 16. Branches will be aligned within @var{NUM} byte
+boundary. @option{-malign-branch-boundary=0}, which is the default,
+doesn't align branches.
+
+@cindex @samp{-malign-branch=} option, i386
+@cindex @samp{-malign-branch=} option, x86-64
+@item -malign-branch=@var{TYPE}[+@var{TYPE}...]
+This option specifies types of branches to align. @var{TYPE} is
+combination of @samp{jcc}, which aligns conditional jumps,
+@samp{fused}, which aligns fused conditional jumps, @samp{jmp},
+which aligns unconditional jumps, @samp{call} which aligns calls,
+@samp{ret}, which aligns rets, @samp{indirect}, which aligns indirect
+jumps and calls. The default is @option{-malign-branch=jcc+fused+jmp}.
+
+@cindex @samp{-malign-branch-prefix-size=} option, i386
+@cindex @samp{-malign-branch-prefix-size=} option, x86-64
+@item -malign-branch-prefix-size=@var{NUM}
+This option specifies the maximum number of prefixes on an instruction
+to align branches. @var{NUM} should be between 0 and 5. The default
+@var{NUM} is 5.
+
+@cindex @samp{-mx86-used-note=} option, i386
+@cindex @samp{-mx86-used-note=} option, x86-64
+@item -mx86-used-note=@var{no}
+@itemx -mx86-used-note=@var{yes}
+These options control whether the assembler should generate
+GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_FEATURE_2_USED
+GNU property notes. The default can be controlled by the
+@option{--enable-x86-used-note} configure option.
+
+@cindex @samp{-mevexrcig=} option, i386
+@cindex @samp{-mevexrcig=} option, x86-64
+@item -mevexrcig=@var{rne}
+@itemx -mevexrcig=@var{rd}
+@itemx -mevexrcig=@var{ru}
+@itemx -mevexrcig=@var{rz}
+These options control how the assembler should encode SAE-only
+EVEX instructions. @option{-mevexrcig=@var{rne}} will encode RC bits
+of EVEX instruction with 00, which is the default.
+@option{-mevexrcig=@var{rd}}, @option{-mevexrcig=@var{ru}}
+and @option{-mevexrcig=@var{rz}} will encode SAE-only EVEX instructions
+with 01, 10 and 11 RC bits, respectively.
+
+@cindex @samp{-mamd64} option, x86-64
+@cindex @samp{-mintel64} option, x86-64
+@item -mamd64
+@itemx -mintel64
+This option specifies that the assembler should accept only AMD64 or
+Intel64 ISA in 64-bit mode. The default is to accept both.
+
+@cindex @samp{-O0} option, i386
+@cindex @samp{-O0} option, x86-64
+@cindex @samp{-O} option, i386
+@cindex @samp{-O} option, x86-64
+@cindex @samp{-O1} option, i386
+@cindex @samp{-O1} option, x86-64
+@cindex @samp{-O2} option, i386
+@cindex @samp{-O2} option, x86-64
+@cindex @samp{-Os} option, i386
+@cindex @samp{-Os} option, x86-64
+@item -O0 | -O | -O1 | -O2 | -Os
+Optimize instruction encoding with smaller instruction size. @samp{-O}
+and @samp{-O1} encode 64-bit register load instructions with 64-bit
+immediate as 32-bit register load instructions with 31-bit or 32-bits
+immediates, encode 64-bit register clearing instructions with 32-bit
+register clearing instructions, encode 256-bit/512-bit VEX/EVEX vector
+register clearing instructions with 128-bit VEX vector register
+clearing instructions, encode 128-bit/256-bit EVEX vector
+register load/store instructions with VEX vector register load/store
+instructions, and encode 128-bit/256-bit EVEX packed integer logical
+instructions with 128-bit/256-bit VEX packed integer logical.
+
+@samp{-O2} includes @samp{-O1} optimization plus encodes
+256-bit/512-bit EVEX vector register clearing instructions with 128-bit
+EVEX vector register clearing instructions. In 64-bit mode VEX encoded
+instructions with commutative source operands will also have their
+source operands swapped if this allows using the 2-byte VEX prefix form
+instead of the 3-byte one. Certain forms of AND as well as OR with the
+same (register) operand specified twice will also be changed to TEST.
+
+@samp{-Os} includes @samp{-O2} optimization plus encodes 16-bit, 32-bit
+and 64-bit register tests with immediate as 8-bit register test with
+immediate. @samp{-O0} turns off this optimization.
+
@end table
@c man end
This directive is only available for COFF based x86 targets.
+@cindex @code{largecomm} directive, ELF
+@item .largecomm @var{symbol} , @var{length}[, @var{alignment}]
+This directive behaves in the same way as the @code{comm} directive
+except that the data is placed into the @var{.lbss} section instead of
+the @var{.bss} section @ref{Comm}.
+
+The directive is intended to be used for data which requires a large
+amount of space, and it is only available for ELF based x86_64
+targets.
+
+@cindex @code{value} directive
+@item .value @var{expression} [, @var{expression}]
+This directive behaves in the same way as the @code{.short} directive,
+taking a series of comma separated expressions and storing them as
+two-byte wide values into the current section.
+
@c FIXME: Document other x86 specific directives ? Eg: .code16gcc,
-@c .largecomm
@end table
In AT&T syntax the size of memory operands is determined from the last
character of the instruction mnemonic. Mnemonic suffixes of @samp{b},
@samp{w}, @samp{l} and @samp{q} specify byte (8-bit), word (16-bit), long
-(32-bit) and quadruple word (64-bit) memory references. Intel syntax accomplishes
-this by prefixing memory operands (@emph{not} the instruction mnemonics) with
-@samp{byte ptr}, @samp{word ptr}, @samp{dword ptr} and @samp{qword ptr}. Thus,
-Intel @samp{mov al, byte ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T
-syntax.
+(32-bit) and quadruple word (64-bit) memory references. Mnemonic suffixes
+of @samp{x}, @samp{y} and @samp{z} specify xmm (128-bit vector), ymm
+(256-bit vector) and zmm (512-bit vector) memory references, only when there's
+no other way to disambiguate an instruction. Intel syntax accomplishes this by
+prefixing memory operands (@emph{not} the instruction mnemonics) with
+@samp{byte ptr}, @samp{word ptr}, @samp{dword ptr}, @samp{qword ptr},
+@samp{xmmword ptr}, @samp{ymmword ptr} and @samp{zmmword ptr}. Thus, Intel
+syntax @samp{mov al, byte ptr @var{foo}} is @samp{movb @var{foo}, %al} in AT&T
+syntax. In Intel syntax, @samp{fword ptr}, @samp{tbyte ptr} and
+@samp{oword ptr} specify 48-bit, 80-bit and 128-bit memory references.
In 64-bit code, @samp{movabs} can be used to encode the @samp{mov}
instruction with the 64-bit displacement or immediate operand.
logical line number directive (@pxref{Comments}) or a preprocessor
control command (@pxref{Preprocessing}).
-If the @option{--divide} command line option has not been specified
+If the @option{--divide} command-line option has not been specified
then the @samp{/} character appearing anywhere on a line also
introduces a line comment.
line.
@node i386-Mnemonics
-@section Instruction Naming
+@section i386-Mnemonics
+@subsection Instruction Naming
@cindex i386 instruction naming
@cindex instruction naming, i386
@cindex encoding options, i386
@cindex encoding options, x86-64
-Different encoding options can be specified via optional mnemonic
-suffix. @samp{.s} suffix swaps 2 register operands in encoding when
-moving from one register to another. @samp{.d8} or @samp{.d32} suffix
-prefers 8bit or 32bit displacement in encoding.
+Different encoding options can be specified via pseudo prefixes:
+
+@itemize @bullet
+@item
+@samp{@{disp8@}} -- prefer 8-bit displacement.
+
+@item
+@samp{@{disp32@}} -- prefer 32-bit displacement.
+
+@item
+@samp{@{load@}} -- prefer load-form instruction.
+
+@item
+@samp{@{store@}} -- prefer store-form instruction.
+
+@item
+@samp{@{vex2@}} -- prefer 2-byte VEX prefix for VEX instruction.
+
+@item
+@samp{@{vex3@}} -- prefer 3-byte VEX prefix for VEX instruction.
+
+@item
+@samp{@{evex@}} -- encode with EVEX prefix.
+
+@item
+@samp{@{rex@}} -- prefer REX prefix for integer and legacy vector
+instructions (x86-64 only). Note that this differs from the @samp{rex}
+prefix which generates REX prefix unconditionally.
+
+@item
+@samp{@{nooptimize@}} -- disable instruction size optimization.
+@end itemize
@cindex conversion instructions, i386
@cindex i386 conversion instructions
AT&T syntax, but are @samp{call far} and @samp{jump far} in Intel
convention.
-@section AT&T Mnemonic versus Intel Mnemonic
+@subsection AT&T Mnemonic versus Intel Mnemonic
@cindex i386 mnemonic compatibility
@cindex mnemonic compatibility, i386
and @samp{%gs}.
@item
-the 3 processor control registers @samp{%cr0}, @samp{%cr2}, and
-@samp{%cr3}.
+the 5 processor control registers @samp{%cr0}, @samp{%cr2},
+@samp{%cr3}, @samp{%cr4}, and @samp{%cr8}.
@item
the 6 debug registers @samp{%db0}, @samp{%db1}, @samp{%db2},
@samp{%mm6} and @samp{%mm7}.
@item
-the 8 SSE registers registers @samp{%xmm0}, @samp{%xmm1}, @samp{%xmm2},
+the 8 128-bit SSE registers registers @samp{%xmm0}, @samp{%xmm1}, @samp{%xmm2},
@samp{%xmm3}, @samp{%xmm4}, @samp{%xmm5}, @samp{%xmm6} and @samp{%xmm7}.
@end itemize
the 8 extended registers @samp{%r8}--@samp{%r15}.
@item
-the 8 32-bit low ends of the extended registers: @samp{%r8d}--@samp{%r15d}
+the 8 32-bit low ends of the extended registers: @samp{%r8d}--@samp{%r15d}.
@item
-the 8 16-bit low ends of the extended registers: @samp{%r8w}--@samp{%r15w}
+the 8 16-bit low ends of the extended registers: @samp{%r8w}--@samp{%r15w}.
@item
-the 8 8-bit low ends of the extended registers: @samp{%r8b}--@samp{%r15b}
+the 8 8-bit low ends of the extended registers: @samp{%r8b}--@samp{%r15b}.
@item
the 4 8-bit registers: @samp{%sil}, @samp{%dil}, @samp{%bpl}, @samp{%spl}.
the 8 debug registers: @samp{%db8}--@samp{%db15}.
@item
-the 8 SSE registers: @samp{%xmm8}--@samp{%xmm15}.
+the 8 128-bit SSE registers: @samp{%xmm8}--@samp{%xmm15}.
+@end itemize
+
+With the AVX extensions more registers were made available:
+
+@itemize @bullet
+
+@item
+the 16 256-bit SSE @samp{%ymm0}--@samp{%ymm15} (only the first 8
+available in 32-bit mode). The bottom 128 bits are overlaid with the
+@samp{xmm0}--@samp{xmm15} registers.
+
+@end itemize
+
+The AVX2 extensions made in 64-bit mode more registers available:
+
+@itemize @bullet
+
+@item
+the 16 128-bit registers @samp{%xmm16}--@samp{%xmm31} and the 16 256-bit
+registers @samp{%ymm16}--@samp{%ymm31}.
+
+@end itemize
+
+The AVX512 extensions added the following registers:
+
+@itemize @bullet
+
+@item
+the 32 512-bit registers @samp{%zmm0}--@samp{%zmm31} (only the first 8
+available in 32-bit mode). The bottom 128 bits are overlaid with the
+@samp{%xmm0}--@samp{%xmm31} registers and the first 256 bits are
+overlaid with the @samp{%ymm0}--@samp{%ymm31} registers.
+
+@item
+the 8 mask registers @samp{%k0}--@samp{%k7}.
+
@end itemize
@node i386-Prefixes
is correct since the processor default operand size is assumed to be 16
bits in a 16-bit code section.
-@node i386-Bugs
-@section AT&T Syntax bugs
-
-The UnixWare assembler, and probably other AT&T derived ix86 Unix
-assemblers, generate floating point instructions with reversed source
-and destination registers in certain cases. Unfortunately, gcc and
-possibly many other programs use this reversed syntax, so we're stuck
-with it.
-
-For example
-
-@smallexample
- fsub %st,%st(3)
-@end smallexample
-@noindent
-results in @samp{%st(3)} being updated to @samp{%st - %st(3)} rather
-than the expected @samp{%st(3) - %st}. This happens with all the
-non-commutative arithmetic floating point operations with two register
-operands where the source register is @samp{%st} and the destination
-register is @samp{%st(i)}.
-
@node i386-Arch
@section Specifying CPU Architecture
@item @samp{i486} @tab @samp{i586} @tab @samp{i686} @tab @samp{pentium}
@item @samp{pentiumpro} @tab @samp{pentiumii} @tab @samp{pentiumiii} @tab @samp{pentium4}
@item @samp{prescott} @tab @samp{nocona} @tab @samp{core} @tab @samp{core2}
-@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om}
+@item @samp{corei7} @tab @samp{l1om} @tab @samp{k1om} @tab @samp{iamcu}
@item @samp{k6} @tab @samp{k6_2} @tab @samp{athlon} @tab @samp{k8}
@item @samp{amdfam10} @tab @samp{bdver1} @tab @samp{bdver2} @tab @samp{bdver3}
-@item @samp{bdver4} @tab @samp{btver1} @tab @samp{btver2}
-@item @samp{generic32} @tab @samp{generic64}
-@item @samp{.mmx} @tab @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
+@item @samp{bdver4} @tab @samp{znver1} @tab @samp{znver2} @tab @samp{btver1}
+@item @samp{btver2} @tab @samp{generic32} @tab @samp{generic64}
+@item @samp{.cmov} @tab @samp{.fxsr} @tab @samp{.mmx}
+@item @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
@item @samp{.ssse3} @tab @samp{.sse4.1} @tab @samp{.sse4.2} @tab @samp{.sse4}
@item @samp{.avx} @tab @samp{.vmx} @tab @samp{.smx} @tab @samp{.ept}
@item @samp{.clflush} @tab @samp{.movbe} @tab @samp{.xsave} @tab @samp{.xsaveopt}
@item @samp{.rdrnd} @tab @samp{.f16c} @tab @samp{.avx2} @tab @samp{.bmi2}
@item @samp{.lzcnt} @tab @samp{.invpcid} @tab @samp{.vmfunc} @tab @samp{.hle}
@item @samp{.rtm} @tab @samp{.adx} @tab @samp{.rdseed} @tab @samp{.prfchw}
-@item @samp{.smap} @tab @samp{.mpx}
-@item @samp{.smap} @tab @samp{.sha}
-@item @samp{.smap} @tab @samp{.clflushopt} @tab @samp{.xsavec} @tab @samp{.xsaves}
-@item @samp{.smap} @tab @samp{.prefetchwt1}
-@item @samp{.smap} @tab @samp{.avx512vl} @tab @samp{.avx512bw} @tab @samp{.avx512dq}
+@item @samp{.smap} @tab @samp{.mpx} @tab @samp{.sha} @tab @samp{.prefetchwt1}
+@item @samp{.clflushopt} @tab @samp{.xsavec} @tab @samp{.xsaves} @tab @samp{.se1}
+@item @samp{.avx512f} @tab @samp{.avx512cd} @tab @samp{.avx512er} @tab @samp{.avx512pf}
+@item @samp{.avx512vl} @tab @samp{.avx512bw} @tab @samp{.avx512dq} @tab @samp{.avx512ifma}
+@item @samp{.avx512vbmi} @tab @samp{.avx512_4fmaps} @tab @samp{.avx512_4vnniw}
+@item @samp{.avx512_vpopcntdq} @tab @samp{.avx512_vbmi2} @tab @samp{.avx512_vnni}
+@item @samp{.avx512_bitalg} @tab @samp{.avx512_bf16} @tab @samp{.avx512_vp2intersect}
+@item @samp{.clwb} @tab @samp{.rdpid} @tab @samp{.ptwrite} @tab @item @samp{.ibt}
+@item @samp{.wbnoinvd} @tab @samp{.pconfig} @tab @samp{.waitpkg} @tab @samp{.cldemote}
+@item @samp{.shstk} @tab @samp{.gfni} @tab @samp{.vaes} @tab @samp{.vpclmulqdq}
+@item @samp{.movdiri} @tab @samp{.movdir64b} @tab @samp{.enqcmd}
@item @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.sse4a} @tab @samp{.sse5}
@item @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme} @tab @samp{.abm}
@item @samp{.lwp} @tab @samp{.fma4} @tab @samp{.xop} @tab @samp{.cx16}
-@item @samp{.padlock}
-@item @samp{.smap} @tab @samp{.avx512f} @tab @samp{.avx512cd} @tab @samp{.avx512er}
-@item @samp{.avx512pf} @tab @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.sse4a}
-@item @samp{.sse5} @tab @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme}
-@item @samp{.abm} @tab @samp{.lwp} @tab @samp{.fma4} @tab @samp{.xop}
-@item @samp{.cx16} @tab @samp{.padlock}
+@item @samp{.padlock} @tab @samp{.clzero} @tab @samp{.mwaitx} @tab @samp{.rdpru}
+@item @samp{.mcommit}
@end multitable
Apart from the warning, there are only two other effects on
.arch i8086,nojumps
@end smallexample
+@node i386-Bugs
+@section AT&T Syntax bugs
+
+The UnixWare assembler, and probably other AT&T derived ix86 Unix
+assemblers, generate floating point instructions with reversed source
+and destination registers in certain cases. Unfortunately, gcc and
+possibly many other programs use this reversed syntax, so we're stuck
+with it.
+
+For example
+
+@smallexample
+ fsub %st,%st(3)
+@end smallexample
+@noindent
+results in @samp{%st(3)} being updated to @samp{%st - %st(3)} rather
+than the expected @samp{%st(3) - %st}. This happens with all the
+non-commutative arithmetic floating point operations with two register
+operands where the source register is @samp{%st} and the destination
+register is @samp{%st(i)}.
+
@node i386-Notes
@section Notes
projects / deliverable / binutils-gdb.git / blobdiff