/* input_scrub.c - Break up input buffers into whole numbers of lines.
- Copyright (C) 1987, 90, 91, 92, 93, 94, 95, 96, 97, 2000
- Free Software Foundation, Inc.
+ Copyright (C) 1987-2020 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ the Free Software Foundation; either version 3, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
-#include <errno.h> /* Need this to make errno declaration right */
#include "as.h"
+#include "filenames.h"
#include "input-file.h"
#include "sb.h"
#include "listing.h"
* were broken across buffers, and return a buffer of full lines to
* the caller.
* The last partial line begins the next buffer we build and return to caller.
- * The buffer returned to caller is preceeded by BEFORE_STRING and followed
+ * The buffer returned to caller is preceded by BEFORE_STRING and followed
* by AFTER_STRING, as sentinels. The last character before AFTER_STRING
* is a newline.
* Also looks after line numbers, for e.g. error messages.
#define BEFORE_SIZE (1)
#define AFTER_SIZE (1)
+#ifndef TC_EOL_IN_INSN
+#define TC_EOL_IN_INSN(P) 0
+#endif
+
static char *buffer_start; /*->1st char of full buffer area. */
static char *partial_where; /*->after last full line in buffer. */
-static int partial_size; /* >=0. Number of chars in partial line in buffer. */
+static size_t partial_size; /* >=0. Number of chars in partial line in buffer. */
/* Because we need AFTER_STRING just after last full line, it clobbers
1st part of partial line. So we preserve 1st part of partial line
here. */
static char save_source[AFTER_SIZE];
-/* What is the largest size buffer that input_file_give_next_buffer()
- could return to us? */
-static unsigned int buffer_length;
+/* The size of the input buffer we concatenate
+ input_file_give_next_buffer chunks into. Excludes the BEFORE and
+ AFTER counts. */
+static size_t buffer_length;
/* The index into an sb structure we are reading from. -1 if none. */
-static int sb_index = -1;
+static size_t sb_index = -1;
/* If we are reading from an sb structure, this is it. */
static sb from_sb;
source line numbers. Whenever we open a file we must fill in
physical_input_file. So if it is NULL we have not opened any files yet. */
-static char *physical_input_file;
-static char *logical_input_file;
+static const char *physical_input_file;
+static const char *logical_input_file;
-typedef unsigned int line_numberT; /* 1-origin line number in a source file. */
+/* 1-origin line number in a source file. */
/* A line ends in '\n' or eof. */
-
-static line_numberT physical_input_line;
+static unsigned int physical_input_line;
static int logical_input_line;
/* Struct used to save the state of the input handler during include files */
struct input_save {
- char *buffer_start;
- char *partial_where;
- int partial_size;
- char save_source[AFTER_SIZE];
- unsigned int buffer_length;
- char *physical_input_file;
- char *logical_input_file;
- line_numberT physical_input_line;
- int logical_input_line;
- int sb_index;
- sb from_sb;
- int from_sb_is_expansion; /* Should we do a conditional check? */
- struct input_save *next_saved_file; /* Chain of input_saves */
- char *input_file_save; /* Saved state of input routines */
- char *saved_position; /* Caller's saved position in buf */
+ char * buffer_start;
+ char * partial_where;
+ size_t partial_size;
+ char save_source[AFTER_SIZE];
+ size_t buffer_length;
+ const char * physical_input_file;
+ const char * logical_input_file;
+ unsigned int physical_input_line;
+ int logical_input_line;
+ size_t sb_index;
+ sb from_sb;
+ int from_sb_is_expansion; /* Should we do a conditional check? */
+ struct input_save * next_saved_file; /* Chain of input_saves. */
+ char * input_file_save; /* Saved state of input routines. */
+ char * saved_position; /* Caller's saved position in buf. */
};
-static struct input_save *input_scrub_push PARAMS ((char *saved_position));
-static char *input_scrub_pop PARAMS ((struct input_save *arg));
-static void as_1_char PARAMS ((unsigned int c, FILE * stream));
+static struct input_save *input_scrub_push (char *saved_position);
+static char *input_scrub_pop (struct input_save *arg);
/* Saved information about the file that .include'd this one. When we hit EOF,
we automatically pop to that file. */
static struct input_save *next_saved_file;
+/* Initialize input buffering. */
+
+static void
+input_scrub_reinit (void)
+{
+ input_file_begin (); /* Reinitialize! */
+ logical_input_line = -1;
+ logical_input_file = NULL;
+
+ buffer_length = input_file_buffer_size () * 2;
+ buffer_start = XNEWVEC (char, BEFORE_SIZE + AFTER_SIZE + 1 + buffer_length);
+ memcpy (buffer_start, BEFORE_STRING, (int) BEFORE_SIZE);
+}
+
/* Push the state of input reading and scrubbing so that we can #include.
The return value is a 'void *' (fudged for old compilers) to a save
area, which can be restored by passing it to input_scrub_pop(). */
static struct input_save *
-input_scrub_push (saved_position)
- char *saved_position;
+input_scrub_push (char *saved_position)
{
- register struct input_save *saved;
+ struct input_save *saved;
- saved = (struct input_save *) xmalloc (sizeof *saved);
+ saved = XNEW (struct input_save);
saved->saved_position = saved_position;
saved->buffer_start = buffer_start;
saved->next_saved_file = next_saved_file;
saved->input_file_save = input_file_push ();
- input_file_begin (); /* Reinitialize! */
- logical_input_line = -1;
- logical_input_file = (char *) NULL;
- buffer_length = input_file_buffer_size ();
sb_index = -1;
- buffer_start = xmalloc ((BEFORE_SIZE + buffer_length + buffer_length + AFTER_SIZE));
- memcpy (buffer_start, BEFORE_STRING, (int) BEFORE_SIZE);
+ input_scrub_reinit ();
return saved;
}
static char *
-input_scrub_pop (saved)
- struct input_save *saved;
+input_scrub_pop (struct input_save *saved)
{
char *saved_position;
}
\f
void
-input_scrub_begin ()
+input_scrub_begin (void)
{
know (strlen (BEFORE_STRING) == BEFORE_SIZE);
know (strlen (AFTER_STRING) == AFTER_SIZE
|| (AFTER_STRING[0] == '\0' && AFTER_SIZE == 1));
- input_file_begin ();
-
- buffer_length = input_file_buffer_size ();
-
- buffer_start = xmalloc ((BEFORE_SIZE + buffer_length + buffer_length + AFTER_SIZE));
- memcpy (buffer_start, BEFORE_STRING, (int) BEFORE_SIZE);
-
- /* Line number things. */
- logical_input_line = -1;
- logical_input_file = (char *) NULL;
physical_input_file = NULL; /* No file read yet. */
next_saved_file = NULL; /* At EOF, don't pop to any other file */
+ input_scrub_reinit ();
do_scrub_begin (flag_m68k_mri);
}
void
-input_scrub_end ()
+input_scrub_end (void)
{
if (buffer_start)
{
Return start of caller's part of buffer. */
char *
-input_scrub_new_file (filename)
- char *filename;
+input_scrub_new_file (const char *filename)
{
input_file_open (filename, !flag_no_comments);
physical_input_file = filename[0] ? filename : _("{standard input}");
input_scrub_new_file. */
char *
-input_scrub_include_file (filename, position)
- char *filename;
- char *position;
+input_scrub_include_file (const char *filename, char *position)
{
next_saved_file = input_scrub_push (position);
return input_scrub_new_file (filename);
expanding a macro. */
void
-input_scrub_include_sb (from, position, is_expansion)
- sb *from;
- char *position;
- int is_expansion;
+input_scrub_include_sb (sb *from, char *position, int is_expansion)
{
+ int newline;
+
if (macro_nest > max_macro_nest)
as_fatal (_("macros nested too deeply"));
++macro_nest;
next_saved_file = input_scrub_push (position);
- sb_new (&from_sb);
+ /* Allocate sufficient space: from->len + optional newline. */
+ newline = from->len >= 1 && from->ptr[0] != '\n';
+ sb_build (&from_sb, from->len + newline);
from_sb_is_expansion = is_expansion;
- if (from->len >= 1 && from->ptr[0] != '\n')
+ if (newline)
{
/* Add the sentinel required by read.c. */
sb_add_char (&from_sb, '\n');
}
- sb_add_sb (&from_sb, from);
+ sb_scrub_and_add_sb (&from_sb, from);
+
+ /* Make sure the parser looks at defined contents when it scans for
+ e.g. end-of-line at the end of a macro. */
+ sb_terminate (&from_sb);
+
sb_index = 1;
/* These variables are reset by input_scrub_push. Restore them
}
void
-input_scrub_close ()
+input_scrub_close (void)
{
input_file_close ();
+ physical_input_line = 0;
+ logical_input_line = -1;
}
char *
-input_scrub_next_buffer (bufp)
- char **bufp;
+input_scrub_next_buffer (char **bufp)
{
- register char *limit; /*->just after last char of buffer. */
+ char *limit; /*->just after last char of buffer. */
- if (sb_index >= 0)
+ if (sb_index != (size_t) -1)
{
if (sb_index >= from_sb.len)
{
sb_kill (&from_sb);
- if (from_sb_is_expansion
- )
+ if (from_sb_is_expansion)
{
cond_finish_check (macro_nest);
#ifdef md_macro_end
}
--macro_nest;
partial_where = NULL;
+ partial_size = 0;
if (next_saved_file != NULL)
*bufp = input_scrub_pop (next_saved_file);
return partial_where;
return partial_where;
}
- *bufp = buffer_start + BEFORE_SIZE;
-
if (partial_size)
{
- memcpy (buffer_start + BEFORE_SIZE, partial_where,
- (unsigned int) partial_size);
+ memmove (buffer_start + BEFORE_SIZE, partial_where, partial_size);
memcpy (buffer_start + BEFORE_SIZE, save_source, AFTER_SIZE);
}
- limit = input_file_give_next_buffer (buffer_start
- + BEFORE_SIZE
- + partial_size);
- if (limit)
- {
- register char *p; /* Find last newline. */
- for (p = limit - 1; *p != '\n'; --p)
- ;
- ++p;
+ while (1)
+ {
+ char *p;
+ char *start = buffer_start + BEFORE_SIZE + partial_size;
- while (p <= buffer_start + BEFORE_SIZE)
+ *bufp = buffer_start + BEFORE_SIZE;
+ limit = input_file_give_next_buffer (start);
+ if (!limit)
{
- int limoff;
-
- limoff = limit - buffer_start;
- buffer_length += input_file_buffer_size ();
- buffer_start = xrealloc (buffer_start,
- (BEFORE_SIZE
- + 2 * buffer_length
- + AFTER_SIZE));
- *bufp = buffer_start + BEFORE_SIZE;
- limit = input_file_give_next_buffer (buffer_start + limoff);
-
- if (limit == NULL)
- {
- as_warn (_("partial line at end of file ignored"));
- partial_where = NULL;
- if (next_saved_file)
- *bufp = input_scrub_pop (next_saved_file);
- return NULL;
- }
+ if (!partial_size)
+ /* End of this file. */
+ break;
+
+ as_warn (_("end of file not at end of a line; newline inserted"));
+ p = buffer_start + BEFORE_SIZE + partial_size;
+ *p++ = '\n';
+ limit = p;
+ }
+ else
+ {
+ /* Terminate the buffer to avoid confusing TC_EOL_IN_INSN. */
+ *limit = '\0';
- for (p = limit - 1; *p != '\n'; --p)
- ;
+ /* Find last newline. */
+ for (p = limit - 1; *p != '\n' || TC_EOL_IN_INSN (p); --p)
+ if (p < start)
+ goto read_more;
++p;
}
+ /* We found a newline in the newly read chars. */
partial_where = p;
partial_size = limit - p;
+
+ /* Save the fragment after that last newline. */
memcpy (save_source, partial_where, (int) AFTER_SIZE);
memcpy (partial_where, AFTER_STRING, (int) AFTER_SIZE);
- }
- else
- {
- partial_where = 0;
- if (partial_size > 0)
- {
- as_warn (_("Partial line at end of file ignored"));
- }
-
- /* Tell the listing we've finished the file. */
- LISTING_EOF ();
+ return partial_where;
- /* If we should pop to another file at EOF, do it. */
- if (next_saved_file)
+ read_more:
+ /* Didn't find a newline. Read more text. */
+ partial_size = limit - (buffer_start + BEFORE_SIZE);
+ if (buffer_length - input_file_buffer_size () < partial_size)
{
- *bufp = input_scrub_pop (next_saved_file); /* Pop state */
- /* partial_where is now correct to return, since we popped it. */
+ /* Increase the buffer when it doesn't have room for the
+ next block of input. */
+ buffer_length *= 2;
+ buffer_start = XRESIZEVEC (char, buffer_start,
+ (buffer_length
+ + BEFORE_SIZE + AFTER_SIZE + 1));
}
}
- return (partial_where);
+
+ /* Tell the listing we've finished the file. */
+ LISTING_EOF ();
+
+ /* If we should pop to another file at EOF, do it. */
+ partial_where = NULL;
+ if (next_saved_file)
+ *bufp = input_scrub_pop (next_saved_file);
+
+ return partial_where;
}
\f
/* The remaining part of this file deals with line numbers, error
messages and so on. Return TRUE if we opened any file. */
int
-seen_at_least_1_file ()
+seen_at_least_1_file (void)
{
return (physical_input_file != NULL);
}
void
-bump_line_counters ()
+bump_line_counters (void)
{
- if (sb_index < 0)
+ if (sb_index == (size_t) -1)
{
++physical_input_line;
if (logical_input_line >= 0)
Returns nonzero if the filename actually changes. */
int
-new_logical_line (fname, line_number)
- char *fname; /* DON'T destroy it! We point to it! */
- int line_number;
+new_logical_line_flags (const char *fname, /* DON'T destroy it! We point to it! */
+ int line_number,
+ int flags)
{
+ switch (flags)
+ {
+ case 0:
+ break;
+ case 1:
+ if (line_number != -1)
+ abort ();
+ break;
+ case 1 << 1:
+ case 1 << 2:
+ /* FIXME: we could check that include nesting is correct. */
+ break;
+ default:
+ abort ();
+ }
+
if (line_number >= 0)
logical_input_line = line_number;
- else if (line_number == -2 && logical_input_line > 0)
- --logical_input_line;
+ else if (line_number == -1 && fname && !*fname && (flags & (1 << 2)))
+ {
+ logical_input_file = physical_input_file;
+ logical_input_line = physical_input_line;
+ fname = NULL;
+ }
if (fname
&& (logical_input_file == NULL
- || strcmp (logical_input_file, fname)))
+ || filename_cmp (logical_input_file, fname)))
{
logical_input_file = fname;
return 1;
else
return 0;
}
-\f
-/* Return the current file name and line number.
- namep should be char * const *, but there are compilers which screw
- up declarations like that, and it's easier to avoid it. */
-void
-as_where (namep, linep)
- char **namep;
- unsigned int *linep;
+int
+new_logical_line (const char *fname, int line_number)
{
- if (logical_input_file != NULL
- && (linep == NULL || logical_input_line >= 0))
- {
- *namep = logical_input_file;
- if (linep != NULL)
- *linep = logical_input_line;
- }
- else if (physical_input_file != NULL)
- {
- *namep = physical_input_file;
- if (linep != NULL)
- *linep = physical_input_line;
- }
- else
- {
- *namep = 0;
- if (linep != NULL)
- *linep = 0;
- }
+ return new_logical_line_flags (fname, line_number, 0);
}
+
\f
-/* Output to given stream how much of line we have scanned so far.
- Assumes we have scanned up to and including input_line_pointer.
- No free '\n' at end of line. */
+/* Return the current physical input file name and line number, if known */
-void
-as_howmuch (stream)
- FILE *stream; /* Opened for write please. */
+const char *
+as_where_physical (unsigned int *linep)
{
- register char *p; /* Scan input line. */
-
- for (p = input_line_pointer - 1; *p != '\n'; --p)
+ if (physical_input_file != NULL)
{
+ if (linep != NULL)
+ *linep = physical_input_line;
+ return physical_input_file;
}
- ++p; /* p->1st char of line. */
- for (; p <= input_line_pointer; p++)
- {
- /* Assume ASCII. EBCDIC & other micro-computer char sets ignored. */
- as_1_char ((unsigned char) *p, stream);
- }
+
+ if (linep != NULL)
+ *linep = 0;
+ return NULL;
}
-static void
-as_1_char (c, stream)
- unsigned int c;
- FILE *stream;
+/* Return the current file name and line number. */
+
+const char *
+as_where (unsigned int *linep)
{
- if (c > 127)
- {
- (void) putc ('%', stream);
- c -= 128;
- }
- if (c < 32)
+ if (logical_input_file != NULL
+ && (linep == NULL || logical_input_line >= 0))
{
- (void) putc ('^', stream);
- c += '@';
+ if (linep != NULL)
+ *linep = logical_input_line;
+ return logical_input_file;
}
- (void) putc (c, stream);
+
+ return as_where_physical (linep);
}
+
projects / deliverable / binutils-gdb.git / blobdiff