-# Copyright (C) 1989-2019 Free Software Foundation, Inc.
+# Copyright (C) 1989-2020 Free Software Foundation, Inc.
# This file is part of GDB.
# Where is the "-liberty" library? Typically in ../libiberty.
LIBIBERTY = ../libiberty/libiberty.a
+# Where is the CTF library? Typically in ../libctf.
+LIBCTF = @LIBCTF@
+CTF_DEPS = @CTF_DEPS@
+
# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
-# Where is the READLINE library? Typically in ../readline.
-READLINE_DIR = ../readline
+# Where is the READLINE library? Typically in ../readline/readline.
+READLINE_DIR = ../readline/readline
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE = @READLINE@
READLINE_DEPS = @READLINE_DEPS@
# Where is lzma? This will be empty if lzma was not available.
LIBLZMA = @LIBLZMA@
-# Where is libbabeltrace? This will be empty if lbabeltrace was not
+# Where is libbabeltrace? This will be empty if libbabeltrace was not
# available.
LIBBABELTRACE = @LIBBABELTRACE@
+# Where is libxxhash? This will be empty if libxxhash was not
+# available.
+LIBXXHASH = @LIBXXHASH@
+
# Where is libipt? This will be empty if libipt was not available.
LIBIPT = @LIBIPT@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+
RDYNAMIC = @RDYNAMIC@
# Where is the INTL library? Typically in ../intl.
GDBFLAGS =
# Helper code from gnulib.
-GNULIB_BUILDDIR = build-gnulib
+GNULIB_BUILDDIR = ../gnulib
LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
-INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
+INCGNU = -I$(srcdir)/../gnulib/import -I$(GNULIB_BUILDDIR)/import
-# Generated headers in the gnulib directory. These must be listed
-# so that they are generated before other files are compiled.
-GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
+SUPPORT = ../gdbsupport
+LIBSUPPORT = $(SUPPORT)/libgdbsupport.a
+INCSUPPORT = -I$(srcdir)/.. -I..
#
# CLI sub directory definitons
tui/tui-source.c \
tui/tui-stack.c \
tui/tui-win.c \
- tui/tui-windata.c \
tui/tui-wingeneral.c \
tui/tui-winsource.c
python/py-record.c \
python/py-record-btrace.c \
python/py-record-full.c \
+ python/py-registers.c \
python/py-signalevent.c \
python/py-stopevent.c \
python/py-symbol.c \
python/py-symtab.c \
python/py-threadevent.c \
+ python/py-tui.c \
python/py-type.c \
python/py-unwind.c \
python/py-utils.c \
SUBDIR_PYTHON_LDFLAGS =
SUBDIR_PYTHON_CFLAGS =
-SUBDIR_UNITTESTS_SRCS = \
+SELFTESTS_SRCS = \
+ disasm-selftests.c \
+ gdbarch-selftests.c \
+ selftest-arch.c \
unittests/array-view-selftests.c \
unittests/child-path-selftests.c \
unittests/cli-utils-selftests.c \
+ unittests/command-def-selftests.c \
unittests/common-utils-selftests.c \
unittests/copy_bitwise-selftests.c \
unittests/environ-selftests.c \
+ unittests/filtered_iterator-selftests.c \
unittests/format_pieces-selftests.c \
unittests/function-view-selftests.c \
unittests/lookup_name_info-selftests.c \
unittests/optional-selftests.c \
unittests/parse-connection-spec-selftests.c \
unittests/ptid-selftests.c \
+ unittests/main-thread-selftests.c \
unittests/mkdir-recursive-selftests.c \
unittests/rsp-low-selftests.c \
unittests/scoped_fd-selftests.c \
unittests/string_view-selftests.c \
unittests/style-selftests.c \
unittests/tracepoint-selftests.c \
+ unittests/tui-selftests.c \
unittests/unpack-selftests.c \
unittests/utils-selftests.c \
+ unittests/vec-utils-selftests.c \
unittests/xml-utils-selftests.c
-SUBDIR_UNITTESTS_OBS = $(patsubst %.c,%.o,$(SUBDIR_UNITTESTS_SRCS))
+SELFTESTS_OBS = $(patsubst %.c,%.o,$(SELFTESTS_SRCS))
SUBDIR_TARGET_SRCS = target/waitstatus.c
SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
# Where are the other opcode tables which only have header file
# versions?
OP_INCLUDE = $(INCLUDE_DIR)/opcode
+# See TOP_CFLAGS as well.
OPCODES_CFLAGS = -I$(OP_INCLUDE)
+# Allow includes like "opcodes/mumble.h".
+TOP_CFLAGS = -I$(top_srcdir)/..
+
# The simulator is usually nonexistent; targets that include one
# should set this to list all the .o or .a files to be linked in.
SIM = @SIM@
CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
-CONFIG_SRC_SUBDIR = arch cli mi common compile tui unittests guile python \
+CONFIG_SRC_SUBDIR = arch cli dwarf2 mi compile tui unittests guile python \
target nat
CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
$(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
- $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS) \
- $(SRCHIGH_CFLAGS)
+ $(INTL_CFLAGS) $(INCGNU) $(INCSUPPORT) $(ENABLE_CFLAGS) \
+ $(INTERNAL_CPPFLAGS) $(SRCHIGH_CFLAGS) $(TOP_CFLAGS) $(PTHREAD_CFLAGS)
INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
INTERNAL_LDFLAGS = \
$(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
- $(LDFLAGS) $(CONFIG_LDFLAGS)
+ $(LDFLAGS) $(CONFIG_LDFLAGS) $(PTHREAD_CFLAGS)
# Libraries and corresponding dependencies for compiling gdb.
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
-CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
+CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(ZLIB) \
+ $(LIBSUPPORT) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(GDBTKLIBS) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
- $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR) \
- $(SRCHIGH_LIBS)
-CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
- $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
+ $(WIN32LIBS) $(LIBGNU) $(LIBICONV) \
+ $(LIBMPFR) $(SRCHIGH_LIBS) $(LIBXXHASH) $(PTHREAD_LIBS) \
+ @LIBDEBUGINFOD@
+CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) $(CTF_DEPS) \
+ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
+ $(LIBSUPPORT)
DIST = gdb
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
+ aarch32-tdep.o \
arc-tdep.o \
+ arch/aarch32.o \
+ arch/arc.o \
arch/arm.o \
arch/arm-get-next-pcs.o \
arch/arm-linux.o \
hppa-obsd-tdep.o \
hppa-tdep.o \
i386-bsd-tdep.o \
- i386-cygwin-tdep.o \
i386-darwin-tdep.o \
i386-dicos-tdep.o \
i386-fbsd-tdep.o \
i386-obsd-tdep.o \
i386-sol2-tdep.o \
i386-tdep.o \
+ i386-windows-tdep.o \
i387-tdep.o \
iq2000-tdep.o \
linux-record.o \
ravenscar-thread.o \
riscv-fbsd-tdep.o \
riscv-linux-tdep.o \
+ riscv-ravenscar-thread.o \
riscv-tdep.o \
rl78-tdep.o \
rs6000-aix-tdep.o \
solib-darwin.o \
solib-dsbt.o \
solib-frv.o \
- solib-spu.o \
solib-svr4.o \
sparc-linux-tdep.o \
sparc-nbsd-tdep.o \
sparc-ravenscar-thread.o \
sparc-sol2-tdep.o \
sparc-tdep.o \
- spu-multiarch.o \
- spu-tdep.o \
symfile-mem.o \
tic6x-linux-tdep.o \
tic6x-tdep.o \
MH_CFLAGS = @MH_CFLAGS@
XM_CLIBS = @XM_CLIBS@
NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
+NM_H = @NM_H@
HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
# Native-target dependent makefile fragment comes in here.
alloc.c \
annotate.c \
arch-utils.c \
+ async-event.c \
auto-load.c \
auxv.c \
ax-gdb.c \
cli-out.c \
coff-pe-read.c \
coffread.c \
- common/agent.c \
- common/btrace-common.c \
- common/buffer.c \
- common/cleanups.c \
- common/common-debug.c \
- common/common-exceptions.c \
- common/common-regcache.c \
- common/common-utils.c \
- common/errors.c \
- common/environ.c \
- common/fileio.c \
- common/filestuff.c \
- common/format.c \
- common/job-control.c \
- common/gdb_tilde_expand.c \
- common/gdb_vecs.c \
- common/netstuff.c \
- common/new-op.c \
- common/pathstuff.c \
- common/print-utils.c \
- common/ptid.c \
- common/rsp-low.c \
- common/run-time-clock.c \
- common/scoped_mmap.c \
- common/signals.c \
- common/signals-state-save-restore.c \
- common/tdesc.c \
- common/vec.c \
- common/xml-utils.c \
complaints.c \
completer.c \
continuations.c \
cp-namespace.c \
cp-support.c \
cp-valprint.c \
- ctf.c \
+ ctfread.c \
d-lang.c \
d-namespace.c \
d-valprint.c \
dbxread.c \
dcache.c \
debug.c \
- demangle.c \
+ debuginfod-support.c \
dictionary.c \
disasm.c \
- disasm-selftests.c \
dummy-frame.c \
- dwarf-index-cache.c \
- dwarf-index-common.c \
- dwarf-index-write.c \
- dwarf2-frame.c \
- dwarf2-frame-tailcall.c \
- dwarf2expr.c \
- dwarf2loc.c \
- dwarf2read.c \
+ dwarf2/abbrev.c \
+ dwarf2/attribute.c \
+ dwarf2/comp-unit.c \
+ dwarf2/dwz.c \
+ dwarf2/expr.c \
+ dwarf2/frame-tailcall.c \
+ dwarf2/frame.c \
+ dwarf2/index-cache.c \
+ dwarf2/index-common.c \
+ dwarf2/index-write.c \
+ dwarf2/leb.c \
+ dwarf2/line-header.c \
+ dwarf2/loc.c \
+ dwarf2/macro.c \
+ dwarf2/read.c \
+ dwarf2/section.c \
+ dwarf2/stringify.c \
eval.c \
- event-loop.c \
event-top.c \
exceptions.c \
exec.c \
frame-base.c \
frame-unwind.c \
gcore.c \
+ gdb-demangle.c \
gdb_bfd.c \
- gdb-dlfcn.c \
gdb_obstack.c \
gdb_regex.c \
- gdb_usleep.c \
gdbarch.c \
- gdbarch-selftests.c \
gdbtypes.c \
gnu-v2-abi.c \
gnu-v3-abi.c \
remote-fileio.c \
remote-notif.c \
reverse.c \
+ run-on-main-thread.c \
rust-lang.c \
sentinel-frame.c \
ser-event.c \
symmisc.c \
symtab.c \
target.c \
+ target-connection.c \
target-dcache.c \
target-descriptions.c \
target-memory.c \
thread-iter.c \
tid-parse.c \
top.c \
+ tracectf.c \
tracefile.c \
tracefile-tfile.c \
tracepoint.c \
# right, it is probably easiest just to list .h files here directly.
HFILES_NO_SRCDIR = \
+ aarch32-tdep.h \
aarch64-ravenscar-thread.h \
aarch64-tdep.h \
ada-lang.h \
arc-tdep.h \
arch-utils.h \
arm-linux-tdep.h \
+ arm-nbsd-tdep.h \
arm-tdep.h \
+ async-event.h \
auto-load.h \
auxv.h \
ax.h \
cp-abi.h \
cp-support.h \
csky-tdep.h \
- ctf.h \
d-lang.h \
darwin-nat.h \
dcache.h \
dictionary.h \
disasm.h \
dummy-frame.h \
- dwarf-index-cache.h \
- dwarf-index-common.h \
- dwarf2-frame.h \
- dwarf2-frame-tailcall.h \
- dwarf2expr.h \
- dwarf2loc.h \
- dwarf2read.h \
- event-loop.h \
+ dwarf2/frame-tailcall.h \
+ dwarf2/frame.h \
+ dwarf2/expr.h \
+ dwarf2/index-cache.h \
+ dwarf2/index-common.h \
+ dwarf2/loc.h \
+ dwarf2/read.h \
event-top.h \
exceptions.h \
exec.h \
gcore.h \
gdb_bfd.h \
gdb_curses.h \
- gdb-dlfcn.h \
gdb_expat.h \
gdb_obstack.h \
gdb_proc_service.h \
gdb_regex.h \
gdb_select.h \
gdb-stabs.h \
- gdb_usleep.h \
gdb_vfork.h \
gdb_wchar.h \
gdbarch.h \
remote-fileio.h \
remote-notif.h \
riscv-fbsd-tdep.h \
+ riscv-ravenscar-thread.h \
riscv-tdep.h \
rs6000-aix-tdep.h \
rs6000-tdep.h \
+ run-on-main-thread.h \
s390-linux-tdep.h \
s390-tdep.h \
score-tdep.h \
solib.h \
solib-aix.h \
solib-darwin.h \
- solib-spu.h \
solib-svr4.h \
solib-target.h \
solist.h \
sparc-ravenscar-thread.h \
sparc-tdep.h \
sparc64-tdep.h \
- spu-tdep.h \
stabsread.h \
stack.h \
stap-probe.h \
terminal.h \
tid-parse.h \
top.h \
+ tracectf.h \
tracefile.h \
tracepoint.h \
trad-frame.h \
x86-linux-nat.h \
x86-nat.h \
xcoffread.h \
+ xml-builtin.h \
xml-support.h \
xml-syscall.h \
xml-tdesc.h \
xtensa-tdep.h \
+ arch/aarch32.h \
arch/aarch64.h \
arch/aarch64-insn.h \
+ arch/arc.h \
arch/arm.h \
arch/i386.h \
arch/ppc-linux-common.h \
cli/cli-setshow.h \
cli/cli-style.h \
cli/cli-utils.h \
- common/buffer.h \
- common/cleanups.h \
- common/common-debug.h \
- common/common-defs.h \
- common/common-exceptions.h \
- common/common-gdbthread.h \
- common/common-regcache.h \
- common/common-types.h \
- common/common-utils.h \
- common/job-control.h \
- common/errors.h \
- common/environ.h \
- common/fileio.h \
- common/format.h \
- common/gdb_assert.h \
- common/gdb_tilde_expand.h \
- common/gdb_locale.h \
- common/gdb_proc_service.h \
- common/gdb_setjmp.h \
- common/gdb_signals.h \
- common/gdb_sys_time.h \
- common/gdb_vecs.h \
- common/gdb_wait.h \
- common/common-inferior.h \
- common/netstuff.h \
- common/host-defs.h \
- common/pathstuff.h \
- common/print-utils.h \
- common/ptid.h \
- common/queue.h \
- common/rsp-low.h \
- common/run-time-clock.h \
- common/signals-state-save-restore.h \
- common/symbol.h \
- common/tdesc.h \
- common/vec.h \
- common/version.h \
- common/x86-xstate.h \
- common/xml-utils.h \
compile/compile.h \
compile/compile-c.h \
compile/compile-cplus.h \
config/djgpp/nl_types.h \
config/i386/nm-i386gnu.h \
config/sparc/nm-sol2.h \
- gnulib/import/inttypes.in.h \
- gnulib/import/stddef.in.h \
- gnulib/import/stdint.in.h \
- gnulib/import/str-two-way.h \
- gnulib/import/string.in.h \
- gnulib/import/extra/snippet/arg-nonnull.h \
- gnulib/import/extra/snippet/c++defs.h \
- gnulib/import/extra/snippet/warn-on-use.h \
mi/mi-cmds.h \
mi/mi-common.h \
mi/mi-console.h \
$(SUBDIR_TARGET_OBS) \
$(SUBDIR_GCC_COMPILE_OBS)
-SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
+SUBDIRS = doc @subdirs@ data-directory
CLEANDIRS = $(SUBDIRS)
# List of subdirectories in the build tree that must exist.
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
-REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
+REQUIRED_SUBDIRS = doc | testsuite | data-directory
# Parser intermediate files.
YYFILES = \
generated_files = \
ada-lex.c \
config.h \
- gcore \
jit-reader.h \
- $(GNULIB_H) \
- $(NAT_GENERATED_FILES)
+ $(NAT_GENERATED_FILES) \
+ $(NM_H)
# Flags needed to compile Python code
PYTHON_CFLAGS = @PYTHON_CFLAGS@
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
- $(INSTALL_PROGRAM) gdb$(EXEEXT) \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) gdb$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
$(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
$(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
endif
-# Convenience rule to handle recursion.
-$(LIBGNU) $(GNULIB_H): all-lib
-all-lib: $(GNULIB_BUILDDIR)/Makefile
- @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
-.PHONY: all-lib
-
# Convenience rule to handle recursion.
.PHONY: all-data-directory
all-data-directory: data-directory/Makefile
# I believe this is wrong; the makefile standards for distclean just
# describe removing files; the only sort of "re-create a distribution"
# functionality described is if the distributed files are unmodified.
-# NB: While GDBSERVER might be configured on native systems, it isn't
-# always included in SUBDIRS. Remove the gdbserver files explicitly.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
- rm -rf $(GNULIB_BUILDDIR)
- rm -f gdbserver/config.status gdbserver/config.log
- rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
- rm -f gdbserver/Makefile gdbserver/config.cache
rm -f nm.h config.status config.h stamp-h b jit-reader.h
rm -f gdb-gdb.py gdb-gdb.gdb
rm -f y.output yacc.acts yacc.tmp y.tab.h
done
Makefile: Makefile.in config.status
- # Regenerate the Makefile and the tm.h / nm.h links.
- CONFIG_FILES="Makefile" \
- CONFIG_COMMANDS= \
- CONFIG_HEADERS= \
- $(SHELL) config.status
-
-$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status
- @cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
- CONFIG_COMMANDS="depfiles" \
- CONFIG_HEADERS= \
- CONFIG_LINKS= \
- $(SHELL) config.status
+ $(SHELL) config.status $@
data-directory/Makefile: data-directory/Makefile.in config.status
- CONFIG_FILES="data-directory/Makefile" \
- CONFIG_COMMANDS="depfiles" \
- CONFIG_HEADERS= \
- CONFIG_LINKS= \
- $(SHELL) config.status
+ $(SHELL) config.status $@
.PHONY: run
run: Makefile
config.h: stamp-h ; @true
stamp-h: $(srcdir)/config.in config.status
- CONFIG_HEADERS=config.h:config.in \
- CONFIG_COMMANDS="default depdir" \
- CONFIG_FILES= \
- CONFIG_LINKS= \
- $(SHELL) config.status
+ $(SHELL) config.status config.h
+
+nm.h: stamp-nmh ; @true
+stamp-nmh: config.status
+ $(SHELL) config.status nm.h
config.status: $(srcdir)/configure configure.nat configure.tgt configure.host ../bfd/development.sh
$(SHELL) config.status --recheck
aclocal_m4_deps = \
configure.ac \
acx_configure_dir.m4 \
- libmcheck.m4 \
transform.m4 \
../bfd/bfd.m4 \
../config/acinclude.m4 \
+ ../config/enable.m4 \
../config/plugins.m4 \
../config/lead-dot.m4 \
../config/override.m4 \
../config/depstand.m4 \
../config/lcmessage.m4 \
../config/codeset.m4 \
- ../config/zlib.m4
+ ../config/zlib.m4 \
+ ../config/ax_pthread.m4
$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
version.c: stamp-version; @true
# Note that the obvious names for the temp file are taken by
# create-version.sh.
-stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
- $(ECHO_GEN) $(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
+stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/../gdbsupport/create-version.sh
+ $(ECHO_GEN) $(SHELL) $(srcdir)/../gdbsupport/create-version.sh $(srcdir) \
$(host_alias) $(target_alias) version-t.t
@$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
@echo stamp > stamp-version
MAKEOVERRIDES =
ALLDEPFILES = \
+ aarch32-tdep.c \
aarch64-fbsd-nat.c \
aarch64-fbsd-tdep.c \
aarch64-linux-nat.c \
hppa-tdep.c \
i386-bsd-nat.c \
i386-bsd-tdep.c \
- i386-cygwin-tdep.c \
i386-darwin-nat.c \
i386-darwin-tdep.c \
i386-dicos-tdep.c \
i386-sol2-nat.c \
i386-sol2-tdep.c \
i386-tdep.c \
+ i386-windows-tdep.c \
i387-tdep.c \
ia64-libunwind-tdep.c \
ia64-linux-nat.c \
riscv-fbsd-tdep.c \
riscv-linux-nat.c \
riscv-linux-tdep.c \
+ riscv-ravenscar-thread.c \
riscv-tdep.c \
rl78-tdep.c \
rs6000-lynx178-tdep.c \
sh-tdep.c \
sol2-tdep.c \
solib-aix.c \
- solib-spu.c \
solib-svr4.c \
sparc-linux-nat.c \
sparc-linux-tdep.c \
sparc64-obsd-tdep.c \
sparc64-sol2-tdep.c \
sparc64-tdep.c \
- spu-linux-nat.c \
- spu-multiarch.c \
- spu-tdep.c \
tilegx-linux-nat.c \
tilegx-linux-tdep.c \
tilegx-tdep.c \
xtensa-linux-nat.c \
xtensa-linux-tdep.c \
xtensa-tdep.c \
- xtensa-xtregs.c \
- common/mingw-strerror.c \
- common/posix-strerror.c
+ xtensa-xtregs.c
# Some files need explicit build rules (due to -Werror problems) or due
# to sub-directory fun 'n' games.
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
- $(INSTALL_PROGRAM) insight$(EXEEXT) \
+ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) insight$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY) ; \
projects / deliverable / binutils-gdb.git / blobdiff