/* The state passed by an exception message. */
struct exc_state
{
- int exception; /* The exception code */
+ int exception; /* The exception code. */
int code, subcode;
- mach_port_t handler; /* The real exception port to handle this. */
- mach_port_t reply; /* The reply port from the exception call. */
+ mach_port_t handler; /* The real exception port to handle this. */
+ mach_port_t reply; /* The reply port from the exception call. */
};
-/* The results of the last wait an inf did. */
+/* The results of the last wait an inf did. */
struct inf_wait
{
struct target_waitstatus status; /* The status returned to gdb. */
- struct exc_state exc; /* The exception that caused us to return. */
+ struct exc_state exc; /* The exception that caused us to return. */
struct proc *thread; /* The thread in question. */
int suppress; /* Something trivial happened. */
};
struct proc *task; /* The mach task. */
struct proc *threads; /* A linked list of all threads in TASK. */
- /* True if THREADS needn't be validated by querying the task. We assume that
- we and the task in question are the only ones frobbing the thread list,
- so as long as we don't let any code run, we don't have to worry about
- THREADS changing. */
+ /* True if THREADS needn't be validated by querying the task. We
+ assume that we and the task in question are the only ones
+ frobbing the thread list, so as long as we don't let any code
+ run, we don't have to worry about THREADS changing. */
int threads_up_to_date;
- pid_t pid; /* The real system PID. */
+ pid_t pid; /* The real system PID. */
struct inf_wait wait; /* What to return from target_wait. */
- /* One thread proc in INF may be in `single-stepping mode'. This is it. */
+ /* One thread proc in INF may be in `single-stepping mode'. This
+ is it. */
struct proc *step_thread;
/* The thread we think is the signal thread. */
expect to happen. */
unsigned pending_execs;
- /* Fields describing global state */
+ /* Fields describing global state. */
/* The task suspend count used when gdb has control. This is normally 1 to
make things easier for us, but sometimes (like when attaching to vital
proc_debug (proc, "sc: %d --> %d", proc->cur_sc, proc->sc);
if (proc->sc == 0 && proc->state_changed)
- /* Since PROC may start running, we must write back any state changes. */
+ /* Since PROC may start running, we must write back any state changes. */
{
gdb_assert (proc_is_thread (proc));
proc_debug (proc, "storing back changed thread state");
return exc_port;
}
-/* Replace PROC's exception port with EXC_PORT, unless it's already been
- done. Stash away any existing exception port so we can restore it later. */
+/* Replace PROC's exception port with EXC_PORT, unless it's already
+ been done. Stash away any existing exception port so we can
+ restore it later. */
void
proc_steal_exc_port (struct proc *proc, mach_port_t exc_port)
{
mach_port_deallocate (mach_task_self (), cur_exc_port);
}
else
- /* Keep a copy of PROC's old exception port so it can be restored. */
+ /* Keep a copy of PROC's old exception port so it can be restored. */
{
if (proc->saved_exc_port)
mach_port_deallocate (mach_task_self (), proc->saved_exc_port);
thread_state_t state = proc_get_state (proc, 1);
if (!state)
- return 0; /* the thread must be dead. */
+ return 0; /* The thread must be dead. */
proc_debug (proc, "tracing %s", set ? "on" : "off");
if (set)
{
/* XXX We don't get the exception unless the thread has its own
- exception port???? */
+ exception port???? */
if (proc->exc_port == MACH_PORT_NULL)
proc_steal_exc_port (proc, proc->inf->event_port);
THREAD_STATE_SET_TRACED (state);
error_t err = proc_pid2task (proc_server, pid, &task_port);
if (err)
- error (_("Error getting task for pid %d: %s"), pid, safe_strerror (err));
+ error (_("Error getting task for pid %d: %s"),
+ pid, safe_strerror (err));
}
inf_debug (inf, "setting task: %d", task_port);
if (task && task->port != task_port)
{
inf->task = 0;
- inf_validate_procs (inf); /* Trash all the threads. */
- _proc_free (task); /* And the task. */
+ inf_validate_procs (inf); /* Trash all the threads. */
+ _proc_free (task); /* And the task. */
}
if (task_port != MACH_PORT_NULL)
/* Makes all the real suspend count deltas of all the procs in INF
match the desired values. Careful to always do thread/task suspend
counts in the safe order. Returns true if at least one thread is
- thought to be running. */
+ thought to be running. */
int
inf_update_suspends (struct inf *inf)
{
struct proc *matched[num_threads + 1];
/* The last thread in INF->threads, so we can add to the end. */
struct proc *last = 0;
- /* The current thread we're considering. */
+ /* The current thread we're considering. */
struct proc *thread = inf->threads;
memset (matched, 0, sizeof (matched));
}
\f
-/* Makes sure that we've got our exception ports entrenched in the process. */
+/* Makes sure that we've got our exception ports entrenched in the process. */
void
inf_steal_exc_ports (struct inf *inf)
{
inf_debug (inf, "stealing exception ports");
- inf_set_step_thread (inf, 0); /* The step thread is special. */
+ inf_set_step_thread (inf, 0); /* The step thread is special. */
proc_steal_exc_port (inf->task, inf->event_port);
for (thread = inf->threads; thread; thread = thread->next)
inf_debug (inf, "restoring exception ports");
- inf_set_step_thread (inf, 0); /* The step thread is special. */
+ inf_set_step_thread (inf, 0); /* The step thread is special. */
proc_restore_exc_port (inf->task);
for (thread = inf->threads; thread; thread = thread->next)
run, and wait for it to get into a reasonable state before we
can continue the rest of the process. When we finally resume the
process the signal we request will be the very first thing that
- happens. */
+ happens. */
{
inf_debug (inf, "sending %s to unstopped process"
" (so resuming signal thread)", NAME);
}
if (err == EIEIO)
- /* Can't do too much... */
+ /* Can't do too much... */
warning (_("Can't deliver signal %s: No signal thread."), NAME);
else if (err)
warning (_("Delivering signal %s: %s"), NAME, safe_strerror (err));
multi-threaded, we don't bother to lock this. */
struct inf *waiting_inf;
-/* Wait for something to happen in the inferior, returning what in STATUS. */
+/* Wait for something to happen in the inferior, returning what in STATUS. */
static ptid_t
gnu_wait (struct target_ops *ops,
ptid_t ptid, struct target_waitstatus *status, int options)
if (proc_wait_pid)
/* The proc server is single-threaded, and only allows a single
- outstanding wait request, so we have to cancel the previous one. */
+ outstanding wait request, so we have to cancel the previous one. */
{
inf_debug (inf, "cancelling previous wait on pid %d", proc_wait_pid);
interrupt_operation (proc_server, 0);
get any other replies, because it was either from a
different INF, or a different process attached to INF --
and the event port, which is the wait reply port, changes
- when you switch processes. */
+ when you switch processes. */
proc_waits_pending = 1;
}
}
if (--inf->pending_execs == 0)
/* We're done! */
{
-#if 0 /* do we need this? */
- prune_threads (1); /* Get rid of the old shell threads */
- renumber_threads (0); /* Give our threads reasonable names. */
+#if 0 /* do we need this? */
+ prune_threads (1); /* Get rid of the old shell
+ threads. */
+ renumber_threads (0); /* Give our threads reasonable
+ names. */
#endif
}
inf_debug (inf, "pending exec completed, pending_execs => %d",
{
/* TID is dead; try and find a new thread. */
if (inf_update_procs (inf) && inf->threads)
- ptid = ptid_build (inf->pid, 0, inf->threads->tid); /* The first available thread. */
+ ptid = ptid_build (inf->pid, 0, inf->threads->tid); /* The first
+ available
+ thread. */
else
ptid = inferior_ptid; /* let wait_for_inferior handle exit case */
}
gdb_assert (inf->task->exc_port == port);
}
if (inf->wait.exc.handler != MACH_PORT_NULL)
- /* Add a reference to the exception handler. */
+ /* Add a reference to the exception handler. */
mach_port_mod_refs (mach_task_self (),
inf->wait.exc.handler, MACH_PORT_RIGHT_SEND,
1);
inf->wait.exc.subcode = subcode;
inf->wait.exc.reply = reply_port;
- /* Exceptions are encoded in the signal space by putting them after
- _NSIG; this assumes they're positive (and not extremely large)! */
+ /* Exceptions are encoded in the signal space by putting
+ them after _NSIG; this assumes they're positive (and not
+ extremely large)! */
inf->wait.status.value.sig =
target_signal_from_host (_NSIG + exception);
}
void
inf_task_died_status (struct inf *inf)
{
- warning (_("Pid %d died with unknown exit status, using SIGKILL."), inf->pid);
+ warning (_("Pid %d died with unknown exit status, using SIGKILL."),
+ inf->pid);
inf->wait.status.kind = TARGET_WAITKIND_SIGNALLED;
inf->wait.status.value.sig = TARGET_SIGNAL_KILL;
}
}
mach_port_deallocate (mach_task_self (), dead_port);
- inf->threads_up_to_date = 0; /* Just in case */
+ inf->threads_up_to_date = 0; /* Just in case. */
return 0;
}
{
if (err != EINTR)
{
- warning (_("Can't wait for pid %d: %s"), inf->pid, safe_strerror (err));
+ warning (_("Can't wait for pid %d: %s"),
+ inf->pid, safe_strerror (err));
inf->no_wait = 1;
/* Since we can't see the inferior's signals, don't trap them. */
Note that a resume may not `take' if there are pending exceptions/&c
still unprocessed from the last resume we did (any given resume may result
- in multiple events returned by wait).
- */
+ in multiple events returned by wait). */
+
static void
gnu_resume (struct target_ops *ops,
ptid_t ptid, int step, enum target_signal sig)
if (port_msgs_queued (inf->event_port))
/* If there are still messages in our event queue, don't bother resuming
- the process, as we're just going to stop it right away anyway. */
+ the process, as we're just going to stop it right away anyway. */
return;
inf_update_procs (inf);
/* Allow all threads to run, except perhaps single-stepping one. */
{
inf_debug (inf, "running all threads; tid = %d", PIDGET (inferior_ptid));
- ptid = inferior_ptid; /* What to step. */
+ ptid = inferior_ptid; /* What to step. */
inf_set_threads_resume_sc (inf, 0, 1);
}
else
inf->traced = 1;
/* Now let the child run again, knowing that it will stop
- immediately because of the ptrace. */
+ immediately because of the ptrace. */
inf_resume (inf);
/* We now have thread info. */
inf_update_signal_thread (inf);
inf_set_traced (inf, inf->want_signals);
-#if 0 /* Do we need this? */
- renumber_threads (0); /* Give our threads reasonable names. */
+#if 0 /* Do we need this? */
+ renumber_threads (0); /* Give our threads reasonable names. */
#endif
}
inferior_ptid = null_ptid;
detach_inferior (pid);
- unpush_target (ops); /* Pop out of handling an inferior */
+ unpush_target (ops); /* Pop out of handling an inferior. */
}
\f
static void
pointer_t copied;
int copy_count;
- /* Get memory from inferior with page aligned addresses */
+ /* Get memory from inferior with page aligned addresses. */
err = vm_read (task, low_address, aligned_length, &copied, ©_count);
if (err)
return 0;
- err = hurd_safe_copyin (myaddr, (void *) (addr - low_address + copied), length);
+ err = hurd_safe_copyin (myaddr, (void *) (addr - low_address + copied),
+ length);
if (err)
{
warning (_("Read from inferior faulted: %s"), safe_strerror (err));
err = vm_deallocate (mach_task_self (), copied, copy_count);
if (err)
- warning (_("gnu_read_inferior vm_deallocate failed: %s"), safe_strerror (err));
+ warning (_("gnu_read_inferior vm_deallocate failed: %s"),
+ safe_strerror (err));
return length;
}
struct vm_region_list *region_element;
struct vm_region_list *region_head = (struct vm_region_list *) NULL;
- /* Get memory from inferior with page aligned addresses */
+ /* Get memory from inferior with page aligned addresses. */
err = vm_read (task,
low_address,
aligned_length,
&offset);
CHK_GOTO_OUT ("vm_region failed", err);
- /* Check for holes in memory */
+ /* Check for holes in memory. */
if (old_address != region_address)
{
warning (_("No memory at 0x%x. Nothing written"),
if (!(max_protection & VM_PROT_WRITE))
{
- warning (_("Memory at address 0x%x is unwritable. Nothing written"),
+ warning (_("Memory at address 0x%x is unwritable. "
+ "Nothing written"),
old_address);
err = KERN_SUCCESS;
length = 0;
goto out;
}
- /* Chain the regions for later use */
+ /* Chain the regions for later use. */
region_element =
(struct vm_region_list *)
obstack_alloc (®ion_obstack, sizeof (struct vm_region_list));
region_element->start = region_address;
region_element->length = region_length;
- /* Chain the regions along with protections */
+ /* Chain the regions along with protections. */
region_element->next = region_head;
region_head = region_element;
/* If things fail after this, we give up.
Somebody is messing up inferior_task's mappings. */
- /* Enable writes to the chained vm regions */
+ /* Enable writes to the chained vm regions. */
for (scan = region_head; scan; scan = scan->next)
{
if (!(scan->protection & VM_PROT_WRITE))
aligned_length);
CHK_GOTO_OUT ("vm_write failed", err);
- /* Set up the original region protections, if they were changed */
+ /* Set up the original region protections, if they were changed. */
for (scan = region_head; scan; scan = scan->next)
{
if (!(scan->protection & VM_PROT_WRITE))
\f
/* Return 0 on failure, number of bytes handled otherwise. TARGET
- is ignored. */
+ is ignored. */
static int
gnu_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write,
struct mem_attrib *attrib,
static void
set_thread_cmd (char *args, int from_tty)
{
- printf_unfiltered ("\"set thread\" must be followed by the name of a thread property, or \"default\".\n");
+ printf_unfiltered ("\"set thread\" must be followed by the "
+ "name of a thread property, or \"default\".\n");
}
static void
show_thread_cmd (char *args, int from_tty)
{
- printf_unfiltered ("\"show thread\" must be followed by the name of a thread property, or \"default\".\n");
+ printf_unfiltered ("\"show thread\" must be followed by the "
+ "name of a thread property, or \"default\".\n");
}
static void
set_thread_default_cmd (char *args, int from_tty)
{
- printf_unfiltered ("\"set thread default\" must be followed by the name of a thread property.\n");
+ printf_unfiltered ("\"set thread default\" must be followed "
+ "by the name of a thread property.\n");
}
static void
show_thread_default_cmd (char *args, int from_tty)
{
- printf_unfiltered ("\"show thread default\" must be followed by the name of a thread property.\n");
+ printf_unfiltered ("\"show thread default\" must be followed "
+ "by the name of a thread property.\n");
}
static int
if (*args && *arg_end == '\0')
return val;
}
- error (_("Illegal argument for \"%s\" command, should be an integer."), cmd_prefix);
+ error (_("Illegal argument for \"%s\" command, should be an integer."),
+ cmd_prefix);
}
static int
else if (strcmp (args, f_val) == 0)
return 0;
else
- error (_("Illegal argument for \"%s\" command, should be \"%s\" or \"%s\"."),
+ error (_("Illegal argument for \"%s\" command, "
+ "should be \"%s\" or \"%s\"."),
cmd_prefix, t_val, f_val);
}
static void
set_task_detach_sc_cmd (char *args, int from_tty)
{
- cur_inf ()->detach_sc = parse_int_arg (args, "set task detach-suspend-count");
+ cur_inf ()->detach_sc = parse_int_arg (args,
+ "set task detach-suspend-count");
}
static void
show_task_detach_sc_cmd (char *args, int from_tty)
{
check_empty (args, "show task detach-suspend-count");
- printf_unfiltered ("The inferior task will be left with a suspend count of %d when detaching.\n",
+ printf_unfiltered ("The inferior task will be left with a "
+ "suspend count of %d when detaching.\n",
cur_inf ()->detach_sc);
}
proc->saved_exc_port = port;
if (!proc->exc_port)
- /* If PROC is a thread, we may not have set its exception port before.
- We can't use proc_steal_exc_port because it also sets saved_exc_port. */
+ /* If PROC is a thread, we may not have set its exception port
+ before. We can't use proc_steal_exc_port because it also sets
+ saved_exc_port. */
{
proc->exc_port = proc->inf->event_port;
err = proc_set_exception_port (proc, proc->exc_port);
int tid = ptid_get_tid (thread_id_to_pid (atoi (args)));
if (tid < 0)
- error (_("Thread ID %s not known. Use the \"info threads\" command to\n"
+ error (_("Thread ID %s not known. "
+ "Use the \"info threads\" command to\n"
"see the IDs of currently known threads."), args);
inf->signal_thread = inf_tid_to_thread (inf, tid);
}
_("Set the suspend count will leave on the thread when detaching."),
&set_task_cmd_list);
add_cmd ("detach-suspend-count", no_class, show_task_detach_sc_cmd,
- _("Show the suspend count will leave on the thread when detaching."),
+ _("Show the suspend count will leave "
+ "on the thread when detaching."),
&show_task_cmd_list);
add_cmd ("exception-port", no_class, set_task_exc_port_cmd, _("\
/* When over-writing code on some machines the I-Cache must be flushed
explicitly, because it is not kept coherent by the lazy hardware.
This definitely includes breakpoints, for instance, or else we
- end up looping in mysterious Bpt traps */
+ end up looping in mysterious Bpt traps. */
void
flush_inferior_icache (CORE_ADDR pc, int amount)
projects / deliverable / binutils-gdb.git / blobdiff