/* Native-dependent code for GNU/Linux i386.
- Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
+ Copyright (C) 1999-2020 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "inferior.h"
#include "gdbcore.h"
#include "regcache.h"
-#include "target.h"
-#include "linux-nat.h"
-
-#include "gdb_assert.h"
-#include "gdb_string.h"
-#include <sys/ptrace.h>
-#include <sys/user.h>
-#include <sys/procfs.h>
-
-#ifdef HAVE_SYS_REG_H
-#include <sys/reg.h>
-#endif
-
-#ifndef ORIG_EAX
-#define ORIG_EAX -1
-#endif
-
-#ifdef HAVE_SYS_DEBUGREG_H
-#include <sys/debugreg.h>
-#endif
-
-#ifndef DR_FIRSTADDR
-#define DR_FIRSTADDR 0
-#endif
-
-#ifndef DR_LASTADDR
-#define DR_LASTADDR 3
-#endif
-
-#ifndef DR_STATUS
-#define DR_STATUS 6
-#endif
-
-#ifndef DR_CONTROL
-#define DR_CONTROL 7
-#endif
-
-/* Prototypes for supply_gregset etc. */
+#include "elf/common.h"
+#include "nat/gdb_ptrace.h"
+#include <sys/uio.h>
#include "gregset.h"
+#include "gdb_proc_service.h"
+#include "i386-linux-nat.h"
#include "i387-tdep.h"
#include "i386-tdep.h"
#include "i386-linux-tdep.h"
+#include "gdbsupport/x86-xstate.h"
-/* Defines ps_err_e, struct ps_prochandle. */
-#include "gdb_proc_service.h"
-\f
+#include "x86-linux-nat.h"
+#include "nat/linux-ptrace.h"
+#include "inf-ptrace.h"
+
+struct i386_linux_nat_target final : public x86_linux_nat_target
+{
+ /* Add our register access methods. */
+ void fetch_registers (struct regcache *, int) override;
+ void store_registers (struct regcache *, int) override;
+
+ /* Override the default ptrace resume method. */
+ void low_resume (ptid_t ptid, int step, enum gdb_signal sig) override;
+};
+
+static i386_linux_nat_target the_i386_linux_nat_target;
/* The register sets used in GNU/Linux ELF core-dumps are identical to
the register sets in `struct user' that is used for a.out
those names are now used for the register sets used in the
`mcontext_t' type, and have a different size and layout. */
-/* Mapping between the general-purpose registers in `struct user'
- format and GDB's register array layout. */
-static int regmap[] =
-{
- EAX, ECX, EDX, EBX,
- UESP, EBP, ESI, EDI,
- EIP, EFL, CS, SS,
- DS, ES, FS, GS,
- -1, -1, -1, -1, /* st0, st1, st2, st3 */
- -1, -1, -1, -1, /* st4, st5, st6, st7 */
- -1, -1, -1, -1, /* fctrl, fstat, ftag, fiseg */
- -1, -1, -1, -1, /* fioff, foseg, fooff, fop */
- -1, -1, -1, -1, /* xmm0, xmm1, xmm2, xmm3 */
- -1, -1, -1, -1, /* xmm4, xmm5, xmm6, xmm6 */
- -1, /* mxcsr */
- ORIG_EAX
-};
-
/* Which ptrace request retrieves which registers?
These apply to the corresponding SET requests as well. */
#define GETFPXREGS_SUPPLIES(regno) \
(I386_ST0_REGNUM <= (regno) && (regno) < I386_SSE_NUM_REGS)
+#define GETXSTATEREGS_SUPPLIES(regno) \
+ (I386_ST0_REGNUM <= (regno) && (regno) < I386_PKEYS_NUM_REGS)
+
/* Does the current host support the GETREGS request? */
int have_ptrace_getregs =
#ifdef HAVE_PTRACE_GETREGS
for this to be a simple variable. */
int have_ptrace_getfpxregs =
#ifdef HAVE_PTRACE_GETFPXREGS
- 1
+ -1
#else
0
#endif
;
\f
-/* Support for the user struct. */
-
-/* Return the address of register REGNUM. BLOCKEND is the value of
- u.u_ar0, which should point to the registers. */
-
-CORE_ADDR
-register_u_addr (CORE_ADDR blockend, int regnum)
-{
- return (blockend + 4 * regmap[regnum]);
-}
-
-/* Return the size of the user struct. */
-
-int
-kernel_u_size (void)
-{
- return (sizeof (struct user));
-}
-\f
-
/* Accessing registers through the U area, one at a time. */
/* Fetch one register. */
static void
-fetch_register (int regno)
+fetch_register (struct regcache *regcache, int regno)
{
- int tid;
+ pid_t tid;
int val;
gdb_assert (!have_ptrace_getregs);
- if (cannot_fetch_register (regno))
+ if (i386_linux_gregset_reg_offset[regno] == -1)
{
- regcache_raw_supply (current_regcache, regno, NULL);
+ regcache->raw_supply (regno, NULL);
return;
}
- /* GNU/Linux LWP ID's are process ID's. */
- tid = TIDGET (inferior_ptid);
- if (tid == 0)
- tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+ tid = get_ptrace_pid (regcache->ptid ());
errno = 0;
- val = ptrace (PTRACE_PEEKUSER, tid, register_addr (regno, 0), 0);
+ val = ptrace (PTRACE_PEEKUSER, tid,
+ i386_linux_gregset_reg_offset[regno], 0);
if (errno != 0)
- error (_("Couldn't read register %s (#%d): %s."), REGISTER_NAME (regno),
+ error (_("Couldn't read register %s (#%d): %s."),
+ gdbarch_register_name (regcache->arch (), regno),
regno, safe_strerror (errno));
- regcache_raw_supply (current_regcache, regno, &val);
+ regcache->raw_supply (regno, &val);
}
-/* Store one register. */
+/* Store one register. */
static void
-store_register (int regno)
+store_register (const struct regcache *regcache, int regno)
{
- int tid;
+ pid_t tid;
int val;
gdb_assert (!have_ptrace_getregs);
- if (cannot_store_register (regno))
+ if (i386_linux_gregset_reg_offset[regno] == -1)
return;
- /* GNU/Linux LWP ID's are process ID's. */
- tid = TIDGET (inferior_ptid);
- if (tid == 0)
- tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+ tid = get_ptrace_pid (regcache->ptid ());
errno = 0;
- regcache_raw_collect (current_regcache, regno, &val);
- ptrace (PTRACE_POKEUSER, tid, register_addr (regno, 0), val);
+ regcache->raw_collect (regno, &val);
+ ptrace (PTRACE_POKEUSER, tid,
+ i386_linux_gregset_reg_offset[regno], val);
if (errno != 0)
- error (_("Couldn't write register %s (#%d): %s."), REGISTER_NAME (regno),
+ error (_("Couldn't write register %s (#%d): %s."),
+ gdbarch_register_name (regcache->arch (), regno),
regno, safe_strerror (errno));
}
\f
in *GREGSETP. */
void
-supply_gregset (elf_gregset_t *gregsetp)
+supply_gregset (struct regcache *regcache, const elf_gregset_t *gregsetp)
{
- elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ const gdb_byte *regp = (const gdb_byte *) gregsetp;
int i;
for (i = 0; i < I386_NUM_GREGS; i++)
- regcache_raw_supply (current_regcache, i, regp + regmap[i]);
+ regcache->raw_supply (i, regp + i386_linux_gregset_reg_offset[i]);
- if (I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
- regcache_raw_supply (current_regcache, I386_LINUX_ORIG_EAX_REGNUM,
- regp + ORIG_EAX);
+ if (I386_LINUX_ORIG_EAX_REGNUM
+ < gdbarch_num_regs (regcache->arch ()))
+ regcache->raw_supply
+ (I386_LINUX_ORIG_EAX_REGNUM,
+ regp + i386_linux_gregset_reg_offset[I386_LINUX_ORIG_EAX_REGNUM]);
}
/* Fill register REGNO (if it is a general-purpose register) in
do this for all registers. */
void
-fill_gregset (elf_gregset_t *gregsetp, int regno)
+fill_gregset (const struct regcache *regcache,
+ elf_gregset_t *gregsetp, int regno)
{
- elf_greg_t *regp = (elf_greg_t *) gregsetp;
+ gdb_byte *regp = (gdb_byte *) gregsetp;
int i;
for (i = 0; i < I386_NUM_GREGS; i++)
if (regno == -1 || regno == i)
- regcache_raw_collect (current_regcache, i, regp + regmap[i]);
+ regcache->raw_collect (i, regp + i386_linux_gregset_reg_offset[i]);
if ((regno == -1 || regno == I386_LINUX_ORIG_EAX_REGNUM)
- && I386_LINUX_ORIG_EAX_REGNUM < NUM_REGS)
- regcache_raw_collect (current_regcache, I386_LINUX_ORIG_EAX_REGNUM,
- regp + ORIG_EAX);
+ && I386_LINUX_ORIG_EAX_REGNUM
+ < gdbarch_num_regs (regcache->arch ()))
+ regcache->raw_collect
+ (I386_LINUX_ORIG_EAX_REGNUM,
+ regp + i386_linux_gregset_reg_offset[I386_LINUX_ORIG_EAX_REGNUM]);
}
#ifdef HAVE_PTRACE_GETREGS
store their values in GDB's register array. */
static void
-fetch_regs (int tid)
+fetch_regs (struct regcache *regcache, int tid)
{
elf_gregset_t regs;
+ elf_gregset_t *regs_p = ®s;
if (ptrace (PTRACE_GETREGS, tid, 0, (int) ®s) < 0)
{
perror_with_name (_("Couldn't get registers"));
}
- supply_gregset (®s);
+ supply_gregset (regcache, (const elf_gregset_t *) regs_p);
}
/* Store all valid general-purpose registers in GDB's register array
into the process/thread specified by TID. */
static void
-store_regs (int tid, int regno)
+store_regs (const struct regcache *regcache, int tid, int regno)
{
elf_gregset_t regs;
if (ptrace (PTRACE_GETREGS, tid, 0, (int) ®s) < 0)
perror_with_name (_("Couldn't get registers"));
- fill_gregset (®s, regno);
+ fill_gregset (regcache, ®s, regno);
if (ptrace (PTRACE_SETREGS, tid, 0, (int) ®s) < 0)
perror_with_name (_("Couldn't write registers"));
#else
-static void fetch_regs (int tid) {}
-static void store_regs (int tid, int regno) {}
+static void fetch_regs (struct regcache *regcache, int tid) {}
+static void store_regs (const struct regcache *regcache, int tid, int regno) {}
#endif
\f
*FPREGSETP. */
void
-supply_fpregset (elf_fpregset_t *fpregsetp)
+supply_fpregset (struct regcache *regcache, const elf_fpregset_t *fpregsetp)
{
- i387_supply_fsave (current_regcache, -1, fpregsetp);
+ i387_supply_fsave (regcache, -1, fpregsetp);
}
/* Fill register REGNO (if it is a floating-point register) in
do this for all registers. */
void
-fill_fpregset (elf_fpregset_t *fpregsetp, int regno)
+fill_fpregset (const struct regcache *regcache,
+ elf_fpregset_t *fpregsetp, int regno)
{
- i387_fill_fsave ((char *) fpregsetp, regno);
+ i387_collect_fsave (regcache, regno, fpregsetp);
}
#ifdef HAVE_PTRACE_GETREGS
thier values in GDB's register array. */
static void
-fetch_fpregs (int tid)
+fetch_fpregs (struct regcache *regcache, int tid)
{
elf_fpregset_t fpregs;
if (ptrace (PTRACE_GETFPREGS, tid, 0, (int) &fpregs) < 0)
perror_with_name (_("Couldn't get floating point status"));
- supply_fpregset (&fpregs);
+ supply_fpregset (regcache, (const elf_fpregset_t *) &fpregs);
}
/* Store all valid floating-point registers in GDB's register array
into the process/thread specified by TID. */
static void
-store_fpregs (int tid, int regno)
+store_fpregs (const struct regcache *regcache, int tid, int regno)
{
elf_fpregset_t fpregs;
if (ptrace (PTRACE_GETFPREGS, tid, 0, (int) &fpregs) < 0)
perror_with_name (_("Couldn't get floating point status"));
- fill_fpregset (&fpregs, regno);
+ fill_fpregset (regcache, &fpregs, regno);
if (ptrace (PTRACE_SETFPREGS, tid, 0, (int) &fpregs) < 0)
perror_with_name (_("Couldn't write floating point status"));
#else
-static void fetch_fpregs (int tid) {}
-static void store_fpregs (int tid, int regno) {}
+static void
+fetch_fpregs (struct regcache *regcache, int tid)
+{
+}
+
+static void
+store_fpregs (const struct regcache *regcache, int tid, int regno)
+{
+}
#endif
\f
/* Transfering floating-point and SSE registers to and from GDB. */
-#ifdef HAVE_PTRACE_GETFPXREGS
-
-/* Fill GDB's register array with the floating-point and SSE register
- values in *FPXREGSETP. */
+/* Fetch all registers covered by the PTRACE_GETREGSET request from
+ process/thread TID and store their values in GDB's register array.
+ Return non-zero if successful, zero otherwise. */
-void
-supply_fpxregset (elf_fpxregset_t *fpxregsetp)
+static int
+fetch_xstateregs (struct regcache *regcache, int tid)
{
- i387_supply_fxsave (current_regcache, -1, fpxregsetp);
+ char xstateregs[X86_XSTATE_MAX_SIZE];
+ struct iovec iov;
+
+ if (have_ptrace_getregset != TRIBOOL_TRUE)
+ return 0;
+
+ iov.iov_base = xstateregs;
+ iov.iov_len = sizeof(xstateregs);
+ if (ptrace (PTRACE_GETREGSET, tid, (unsigned int) NT_X86_XSTATE,
+ &iov) < 0)
+ perror_with_name (_("Couldn't read extended state status"));
+
+ i387_supply_xsave (regcache, -1, xstateregs);
+ return 1;
}
-/* Fill register REGNO (if it is a floating-point or SSE register) in
- *FPXREGSETP with the value in GDB's register array. If REGNO is
- -1, do this for all registers. */
+/* Store all valid registers in GDB's register array covered by the
+ PTRACE_SETREGSET request into the process/thread specified by TID.
+ Return non-zero if successful, zero otherwise. */
-void
-fill_fpxregset (elf_fpxregset_t *fpxregsetp, int regno)
+static int
+store_xstateregs (const struct regcache *regcache, int tid, int regno)
{
- i387_fill_fxsave ((char *) fpxregsetp, regno);
+ char xstateregs[X86_XSTATE_MAX_SIZE];
+ struct iovec iov;
+
+ if (have_ptrace_getregset != TRIBOOL_TRUE)
+ return 0;
+
+ iov.iov_base = xstateregs;
+ iov.iov_len = sizeof(xstateregs);
+ if (ptrace (PTRACE_GETREGSET, tid, (unsigned int) NT_X86_XSTATE,
+ &iov) < 0)
+ perror_with_name (_("Couldn't read extended state status"));
+
+ i387_collect_xsave (regcache, regno, xstateregs, 0);
+
+ if (ptrace (PTRACE_SETREGSET, tid, (unsigned int) NT_X86_XSTATE,
+ (int) &iov) < 0)
+ perror_with_name (_("Couldn't write extended state status"));
+
+ return 1;
}
+#ifdef HAVE_PTRACE_GETFPXREGS
+
/* Fetch all registers covered by the PTRACE_GETFPXREGS request from
process/thread TID and store their values in GDB's register array.
Return non-zero if successful, zero otherwise. */
static int
-fetch_fpxregs (int tid)
+fetch_fpxregs (struct regcache *regcache, int tid)
{
elf_fpxregset_t fpxregs;
perror_with_name (_("Couldn't read floating-point and SSE registers"));
}
- supply_fpxregset (&fpxregs);
+ i387_supply_fxsave (regcache, -1, (const elf_fpxregset_t *) &fpxregs);
return 1;
}
Return non-zero if successful, zero otherwise. */
static int
-store_fpxregs (int tid, int regno)
+store_fpxregs (const struct regcache *regcache, int tid, int regno)
{
elf_fpxregset_t fpxregs;
perror_with_name (_("Couldn't read floating-point and SSE registers"));
}
- fill_fpxregset (&fpxregs, regno);
+ i387_collect_fxsave (regcache, regno, &fpxregs);
if (ptrace (PTRACE_SETFPXREGS, tid, 0, &fpxregs) == -1)
perror_with_name (_("Couldn't write floating-point and SSE registers"));
#else
-static int fetch_fpxregs (int tid) { return 0; }
-static int store_fpxregs (int tid, int regno) { return 0; }
-
-#endif /* HAVE_PTRACE_GETFPXREGS */
-\f
-
-/* Transferring arbitrary registers between GDB and inferior. */
-
-/* Check if register REGNO in the child process is accessible.
- If we are accessing registers directly via the U area, only the
- general-purpose registers are available.
- All registers should be accessible if we have GETREGS support. */
-
-int
-cannot_fetch_register (int regno)
+static int
+fetch_fpxregs (struct regcache *regcache, int tid)
{
- gdb_assert (regno >= 0 && regno < NUM_REGS);
- return (!have_ptrace_getregs && regmap[regno] == -1);
+ return 0;
}
-int
-cannot_store_register (int regno)
+static int
+store_fpxregs (const struct regcache *regcache, int tid, int regno)
{
- gdb_assert (regno >= 0 && regno < NUM_REGS);
- return (!have_ptrace_getregs && regmap[regno] == -1);
+ return 0;
}
+#endif /* HAVE_PTRACE_GETFPXREGS */
+\f
+
+/* Transferring arbitrary registers between GDB and inferior. */
+
/* Fetch register REGNO from the child process. If REGNO is -1, do
this for all registers (including the floating point and SSE
registers). */
-static void
-i386_linux_fetch_inferior_registers (int regno)
+void
+i386_linux_nat_target::fetch_registers (struct regcache *regcache, int regno)
{
- int tid;
+ pid_t tid;
/* Use the old method of peeking around in `struct user' if the
GETREGS request isn't available. */
{
int i;
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (regcache->arch ()); i++)
if (regno == -1 || regno == i)
- fetch_register (i);
+ fetch_register (regcache, i);
return;
}
- /* GNU/Linux LWP ID's are process ID's. */
- tid = TIDGET (inferior_ptid);
- if (tid == 0)
- tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+ tid = get_ptrace_pid (regcache->ptid ());
/* Use the PTRACE_GETFPXREGS request whenever possible, since it
transfers more registers in one system call, and we'll cache the
zero. */
if (regno == -1)
{
- fetch_regs (tid);
+ fetch_regs (regcache, tid);
/* The call above might reset `have_ptrace_getregs'. */
if (!have_ptrace_getregs)
{
- i386_linux_fetch_inferior_registers (regno);
+ fetch_registers (regcache, regno);
return;
}
- if (fetch_fpxregs (tid))
+ if (fetch_xstateregs (regcache, tid))
+ return;
+ if (fetch_fpxregs (regcache, tid))
return;
- fetch_fpregs (tid);
+ fetch_fpregs (regcache, tid);
return;
}
if (GETREGS_SUPPLIES (regno))
{
- fetch_regs (tid);
+ fetch_regs (regcache, tid);
return;
}
+ if (GETXSTATEREGS_SUPPLIES (regno))
+ {
+ if (fetch_xstateregs (regcache, tid))
+ return;
+ }
+
if (GETFPXREGS_SUPPLIES (regno))
{
- if (fetch_fpxregs (tid))
+ if (fetch_fpxregs (regcache, tid))
return;
/* Either our processor or our kernel doesn't support the SSE
more graceful to handle differences in the register set using
gdbarch. Until then, this will at least make things work
plausibly. */
- fetch_fpregs (tid);
+ fetch_fpregs (regcache, tid);
return;
}
/* Store register REGNO back into the child process. If REGNO is -1,
do this for all registers (including the floating point and SSE
registers). */
-static void
-i386_linux_store_inferior_registers (int regno)
+void
+i386_linux_nat_target::store_registers (struct regcache *regcache, int regno)
{
- int tid;
+ pid_t tid;
/* Use the old method of poking around in `struct user' if the
SETREGS request isn't available. */
{
int i;
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (regcache->arch ()); i++)
if (regno == -1 || regno == i)
- store_register (i);
+ store_register (regcache, i);
return;
}
- /* GNU/Linux LWP ID's are process ID's. */
- tid = TIDGET (inferior_ptid);
- if (tid == 0)
- tid = PIDGET (inferior_ptid); /* Not a threaded program. */
+ tid = get_ptrace_pid (regcache->ptid ());
/* Use the PTRACE_SETFPXREGS requests whenever possible, since it
transfers more registers in one system call. But remember that
store_fpxregs can fail, and return zero. */
if (regno == -1)
{
- store_regs (tid, regno);
- if (store_fpxregs (tid, regno))
+ store_regs (regcache, tid, regno);
+ if (store_xstateregs (regcache, tid, regno))
return;
- store_fpregs (tid, regno);
+ if (store_fpxregs (regcache, tid, regno))
+ return;
+ store_fpregs (regcache, tid, regno);
return;
}
if (GETREGS_SUPPLIES (regno))
{
- store_regs (tid, regno);
+ store_regs (regcache, tid, regno);
return;
}
+ if (GETXSTATEREGS_SUPPLIES (regno))
+ {
+ if (store_xstateregs (regcache, tid, regno))
+ return;
+ }
+
if (GETFPXREGS_SUPPLIES (regno))
{
- if (store_fpxregs (tid, regno))
+ if (store_fpxregs (regcache, tid, regno))
return;
/* Either our processor or our kernel doesn't support the SSE
registers, so just write the FP registers in the traditional
way. */
- store_fpregs (tid, regno);
+ store_fpregs (regcache, tid, regno);
return;
}
}
\f
-/* Support for debug registers. */
-
-static unsigned long
-i386_linux_dr_get (int regnum)
-{
- int tid;
- unsigned long value;
-
- /* FIXME: kettenis/2001-01-29: It's not clear what we should do with
- multi-threaded processes here. For now, pretend there is just
- one thread. */
- tid = PIDGET (inferior_ptid);
-
- /* FIXME: kettenis/2001-03-27: Calling perror_with_name if the
- ptrace call fails breaks debugging remote targets. The correct
- way to fix this is to add the hardware breakpoint and watchpoint
- stuff to the target vector. For now, just return zero if the
- ptrace call fails. */
- errno = 0;
- value = ptrace (PTRACE_PEEKUSER, tid,
- offsetof (struct user, u_debugreg[regnum]), 0);
- if (errno != 0)
-#if 0
- perror_with_name (_("Couldn't read debug register"));
-#else
- return 0;
-#endif
-
- return value;
-}
-
-static void
-i386_linux_dr_set (int regnum, unsigned long value)
-{
- int tid;
-
- /* FIXME: kettenis/2001-01-29: It's not clear what we should do with
- multi-threaded processes here. For now, pretend there is just
- one thread. */
- tid = PIDGET (inferior_ptid);
-
- errno = 0;
- ptrace (PTRACE_POKEUSER, tid,
- offsetof (struct user, u_debugreg[regnum]), value);
- if (errno != 0)
- perror_with_name (_("Couldn't write debug register"));
-}
-
-void
-i386_linux_dr_set_control (unsigned long control)
-{
- i386_linux_dr_set (DR_CONTROL, control);
-}
-
-void
-i386_linux_dr_set_addr (int regnum, CORE_ADDR addr)
-{
- gdb_assert (regnum >= 0 && regnum <= DR_LASTADDR - DR_FIRSTADDR);
-
- i386_linux_dr_set (DR_FIRSTADDR + regnum, addr);
-}
-
-void
-i386_linux_dr_reset_addr (int regnum)
-{
- gdb_assert (regnum >= 0 && regnum <= DR_LASTADDR - DR_FIRSTADDR);
-
- i386_linux_dr_set (DR_FIRSTADDR + regnum, 0L);
-}
-
-unsigned long
-i386_linux_dr_get_status (void)
-{
- return i386_linux_dr_get (DR_STATUS);
-}
-\f
-
/* Called by libthread_db. Returns a pointer to the thread local
storage (or its descriptor). */
ps_err_e
-ps_get_thread_area (const struct ps_prochandle *ph,
+ps_get_thread_area (struct ps_prochandle *ph,
lwpid_t lwpid, int idx, void **base)
{
- /* NOTE: cagney/2003-08-26: The definition of this buffer is found
- in the kernel header <asm-i386/ldt.h>. It, after padding, is 4 x
- 4 byte integers in size: `entry_number', `base_addr', `limit',
- and a bunch of status bits.
-
- The values returned by this ptrace call should be part of the
- regcache buffer, and ps_get_thread_area should channel its
- request through the regcache. That way remote targets could
- provide the value using the remote protocol and not this direct
- call.
-
- Is this function needed? I'm guessing that the `base' is the
- address of a a descriptor that libthread_db uses to find the
- thread local address base that GDB needs. Perhaps that
- descriptor is defined by the ABI. Anyway, given that
- libthread_db calls this function without prompting (gdb
- requesting tls base) I guess it needs info in there anyway. */
- unsigned int desc[4];
- gdb_assert (sizeof (int) == 4);
-
-#ifndef PTRACE_GET_THREAD_AREA
-#define PTRACE_GET_THREAD_AREA 25
-#endif
+ unsigned int base_addr;
+ ps_err_e result;
- if (ptrace (PTRACE_GET_THREAD_AREA, lwpid,
- (void *) idx, (unsigned long) &desc) < 0)
- return PS_ERR;
+ result = x86_linux_get_thread_area (lwpid, (void *) idx, &base_addr);
- *(int *)base = desc[1];
- return PS_OK;
+ if (result == PS_OK)
+ *(int *) base = base_addr;
+
+ return result;
}
\f
If STEP is nonzero, single-step it.
If SIGNAL is nonzero, give it that signal. */
-static void
-i386_linux_resume (ptid_t ptid, int step, enum target_signal signal)
+void
+i386_linux_nat_target::low_resume (ptid_t ptid, int step, enum gdb_signal signal)
{
- int pid = PIDGET (ptid);
-
- int request = PTRACE_CONT;
+ int pid = ptid.lwp ();
+ int request;
- if (pid == -1)
- /* Resume all threads. */
- /* I think this only gets used in the non-threaded case, where "resume
- all threads" and "resume inferior_ptid" are the same. */
- pid = PIDGET (inferior_ptid);
+ if (catch_syscall_enabled () > 0)
+ request = PTRACE_SYSCALL;
+ else
+ request = PTRACE_CONT;
if (step)
{
- CORE_ADDR pc = read_pc_pid (pid_to_ptid (pid));
+ struct regcache *regcache = get_thread_regcache (this, ptid);
+ struct gdbarch *gdbarch = regcache->arch ();
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ ULONGEST pc;
gdb_byte buf[LINUX_SYSCALL_LEN];
request = PTRACE_SINGLESTEP;
+ regcache_cooked_read_unsigned (regcache,
+ gdbarch_pc_regnum (gdbarch), &pc);
+
/* Returning from a signal trampoline is done by calling a
special system call (sigreturn or rt_sigreturn, see
i386-linux-tdep.c for more information). This system call
that's about to be restored, and set the trace flag there. */
/* First check if PC is at a system call. */
- if (read_memory_nobpt (pc, buf, LINUX_SYSCALL_LEN) == 0
+ if (target_read_memory (pc, buf, LINUX_SYSCALL_LEN) == 0
&& memcmp (buf, linux_syscall, LINUX_SYSCALL_LEN) == 0)
{
- int syscall = read_register_pid (LINUX_SYSCALL_REGNUM,
- pid_to_ptid (pid));
+ ULONGEST syscall;
+ regcache_cooked_read_unsigned (regcache,
+ LINUX_SYSCALL_REGNUM, &syscall);
/* Then check the system call number. */
if (syscall == SYS_sigreturn || syscall == SYS_rt_sigreturn)
{
- CORE_ADDR sp = read_register (I386_ESP_REGNUM);
- CORE_ADDR addr = sp;
+ ULONGEST sp, addr;
unsigned long int eflags;
+ regcache_cooked_read_unsigned (regcache, I386_ESP_REGNUM, &sp);
if (syscall == SYS_rt_sigreturn)
- addr = read_memory_integer (sp + 8, 4) + 20;
+ addr = read_memory_unsigned_integer (sp + 8, 4, byte_order)
+ + 20;
+ else
+ addr = sp;
/* Set the trace flag in the context that's about to be
restored. */
}
}
- if (ptrace (request, pid, 0, target_signal_to_host (signal)) == -1)
+ if (ptrace (request, pid, 0, gdb_signal_to_host (signal)) == -1)
perror_with_name (("ptrace"));
}
-static void (*super_post_startup_inferior) (ptid_t ptid);
-
-static void
-i386_linux_child_post_startup_inferior (ptid_t ptid)
-{
- i386_cleanup_dregs ();
- super_post_startup_inferior (ptid);
-}
-
void
_initialize_i386_linux_nat (void)
{
- struct target_ops *t;
-
- /* Fill in the generic GNU/Linux methods. */
- t = linux_target ();
-
- /* Override the default ptrace resume method. */
- t->to_resume = i386_linux_resume;
-
- /* Override the GNU/Linux inferior startup hook. */
- super_post_startup_inferior = t->to_post_startup_inferior;
- t->to_post_startup_inferior = i386_linux_child_post_startup_inferior;
-
- /* Add our register access methods. */
- t->to_fetch_registers = i386_linux_fetch_inferior_registers;
- t->to_store_registers = i386_linux_store_inferior_registers;
+ linux_target = &the_i386_linux_nat_target;
- /* Register the target. */
- linux_nat_add_target (t);
+ /* Add the target. */
+ add_inf_child_target (linux_target);
}
projects / deliverable / binutils-gdb.git / blobdiff