#include "target.h"
#include "nat/linux-nat.h"
#include "nat/linux-waitpid.h"
-#include "common/gdb_wait.h"
+#include "gdbsupport/gdb_wait.h"
#include <unistd.h>
#include <sys/syscall.h>
#include "nat/gdb_ptrace.h"
#include "nat/linux-osdata.h"
#include "linux-tdep.h"
#include "symfile.h"
-#include "common/agent.h"
+#include "gdbsupport/agent.h"
#include "tracepoint.h"
-#include "common/buffer.h"
+#include "gdbsupport/buffer.h"
#include "target-descriptions.h"
-#include "common/filestuff.h"
+#include "gdbsupport/filestuff.h"
#include "objfiles.h"
#include "nat/linux-namespaces.h"
-#include "common/fileio.h"
-#include "common/scope-exit.h"
-
-#ifndef SPUFS_MAGIC
-#define SPUFS_MAGIC 0x23c9b64e
-#endif
+#include "gdbsupport/fileio.h"
+#include "gdbsupport/scope-exit.h"
+#include "gdbsupport/gdb-sigmask.h"
/* This comment documents high-level logic of this file.
\f
-/* Original signal mask. */
-static sigset_t normal_mask;
-
/* Signal mask for use with sigsuspend in linux_nat_wait, initialized in
_initialize_linux_nat. */
static sigset_t suspend_mask;
if (!sigismember (&blocked_mask, SIGCHLD))
sigaddset (&blocked_mask, SIGCHLD);
- sigprocmask (SIG_BLOCK, &blocked_mask, prev_mask);
+ gdb_sigmask (SIG_BLOCK, &blocked_mask, prev_mask);
}
/* Restore child signals mask, previously returned by
static void
restore_child_signals_mask (sigset_t *prev_mask)
{
- sigprocmask (SIG_SETMASK, prev_mask, NULL);
+ gdb_sigmask (SIG_SETMASK, prev_mask, NULL);
}
/* Mask of signals to pass directly to the inferior. */
/* Make sure we report all signals during attach. */
pass_signals ({});
- TRY
+ try
{
inf_ptrace_target::attach (args, from_tty);
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
pid_t pid = parse_pid_to_attach (args);
std::string reason = linux_ptrace_attach_fail_reason (pid);
if (!reason.empty ())
- throw_error (ex.error, "warning: %s\n%s", reason.c_str (), ex.message);
+ throw_error (ex.error, "warning: %s\n%s", reason.c_str (),
+ ex.what ());
else
- throw_error (ex.error, "%s", ex.message);
+ throw_error (ex.error, "%s", ex.what ());
}
- END_CATCH
/* The ptrace base target adds the main thread with (pid,0,0)
format. Decorate it with lwp info. */
/* Preparing to resume may try to write registers, and fail if the
lwp is zombie. If that happens, ignore the error. We'll handle
it below, when detach fails with ESRCH. */
- TRY
+ try
{
linux_target->low_prepare_to_resume (lp);
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (!check_ptrace_stopped_lwp_gone (lp))
- throw_exception (ex);
+ throw;
}
- END_CATCH
if (ptrace (PTRACE_DETACH, lwpid, 0, signo) < 0)
{
if (ret == -1)
{
warning (_("Couldn't reap LWP %d while detaching: %s"),
- lwpid, strerror (errno));
+ lwpid, safe_strerror (errno));
}
else if (!WIFEXITED (status) && !WIFSIGNALED (status))
{
inferiors running. */
/* Stop all threads before detaching. ptrace requires that the
- thread is stopped to sucessfully detach. */
+ thread is stopped to successfully detach. */
iterate_over_lwps (ptid_t (pid), stop_callback);
/* ... and wait until all of them have reported back that
they're no longer running. */
static void
linux_resume_one_lwp (struct lwp_info *lp, int step, enum gdb_signal signo)
{
- TRY
+ try
{
linux_resume_one_lwp_throw (lp, step, signo);
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (!check_ptrace_stopped_lwp_gone (lp))
- throw_exception (ex);
+ throw;
}
- END_CATCH
}
/* Resume LP. */
/* When using hardware single-step, we need to report every signal.
Otherwise, signals in pass_mask may be short-circuited
- except signals that might be caused by a breakpoint. */
+ except signals that might be caused by a breakpoint, or SIGSTOP
+ if we sent the SIGSTOP and are waiting for it to arrive. */
if (!lp->step
&& WSTOPSIG (status) && sigismember (&pass_mask, WSTOPSIG (status))
+ && (WSTOPSIG (status) != SIGSTOP
+ || !find_thread_ptid (lp->ptid)->stop_requested)
&& !linux_wstatus_maybe_breakpoint (status))
{
linux_resume_one_lwp (lp, lp->step, signo);
- If the thread group leader exits while other threads in the
thread group still exist, waitpid(TGID, ...) hangs. That
waitpid won't return an exit status until the other threads
- in the group are reapped.
+ in the group are reaped.
- When a non-leader thread execs, that thread just vanishes
without reporting an exit (so we'd hang if we waited for it
struct regcache *regcache = get_thread_regcache (lp->ptid);
struct gdbarch *gdbarch = regcache->arch ();
- TRY
+ try
{
CORE_ADDR pc = regcache_read_pc (regcache);
int leave_stopped = 0;
linux_resume_one_lwp_throw (lp, lp->step, GDB_SIGNAL_0);
}
}
- CATCH (ex, RETURN_MASK_ERROR)
+ catch (const gdb_exception_error &ex)
{
if (!check_ptrace_stopped_lwp_gone (lp))
- throw_exception (ex);
+ throw;
}
- END_CATCH
}
return 0;
ptid_t ptid = ptid_t (inferior_ptid.pid ());
/* Stop all threads before killing them, since ptrace requires
- that the thread is stopped to sucessfully PTRACE_KILL. */
+ that the thread is stopped to successfully PTRACE_KILL. */
iterate_over_lwps (ptid, stop_callback);
/* ... and wait until all of them have reported back that
they're no longer running. */
const gdb_byte *writebuf, ULONGEST offset, ULONGEST len,
ULONGEST *xfered_len);
-static enum target_xfer_status
-linux_proc_xfer_spu (enum target_object object,
- const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf,
- ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);
-
static enum target_xfer_status
linux_proc_xfer_partial (enum target_object object,
const char *annex, gdb_byte *readbuf,
return linux_nat_xfer_osdata (object, annex, readbuf, writebuf,
offset, len, xfered_len);
- if (object == TARGET_OBJECT_SPU)
- return linux_proc_xfer_spu (object, annex, readbuf, writebuf,
- offset, len, xfered_len);
-
/* GDB calculates all addresses in the largest possible address
width.
The address width must be masked before its final use - either by
}
-/* Enumerate spufs IDs for process PID. */
-static LONGEST
-spu_enumerate_spu_ids (int pid, gdb_byte *buf, ULONGEST offset, ULONGEST len)
-{
- enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
- LONGEST pos = 0;
- LONGEST written = 0;
- char path[128];
- DIR *dir;
- struct dirent *entry;
-
- xsnprintf (path, sizeof path, "/proc/%d/fd", pid);
- dir = opendir (path);
- if (!dir)
- return -1;
-
- rewinddir (dir);
- while ((entry = readdir (dir)) != NULL)
- {
- struct stat st;
- struct statfs stfs;
- int fd;
-
- fd = atoi (entry->d_name);
- if (!fd)
- continue;
-
- xsnprintf (path, sizeof path, "/proc/%d/fd/%d", pid, fd);
- if (stat (path, &st) != 0)
- continue;
- if (!S_ISDIR (st.st_mode))
- continue;
-
- if (statfs (path, &stfs) != 0)
- continue;
- if (stfs.f_type != SPUFS_MAGIC)
- continue;
-
- if (pos >= offset && pos + 4 <= offset + len)
- {
- store_unsigned_integer (buf + pos - offset, 4, byte_order, fd);
- written += 4;
- }
- pos += 4;
- }
-
- closedir (dir);
- return written;
-}
-
-/* Implement the to_xfer_partial interface for the TARGET_OBJECT_SPU
- object type, using the /proc file system. */
-
-static enum target_xfer_status
-linux_proc_xfer_spu (enum target_object object,
- const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf,
- ULONGEST offset, ULONGEST len, ULONGEST *xfered_len)
-{
- char buf[128];
- int fd = 0;
- int ret = -1;
- int pid = inferior_ptid.lwp ();
-
- if (!annex)
- {
- if (!readbuf)
- return TARGET_XFER_E_IO;
- else
- {
- LONGEST l = spu_enumerate_spu_ids (pid, readbuf, offset, len);
-
- if (l < 0)
- return TARGET_XFER_E_IO;
- else if (l == 0)
- return TARGET_XFER_EOF;
- else
- {
- *xfered_len = (ULONGEST) l;
- return TARGET_XFER_OK;
- }
- }
- }
-
- xsnprintf (buf, sizeof buf, "/proc/%d/fd/%s", pid, annex);
- fd = gdb_open_cloexec (buf, writebuf? O_WRONLY : O_RDONLY, 0);
- if (fd <= 0)
- return TARGET_XFER_E_IO;
-
- if (offset != 0
- && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
- {
- close (fd);
- return TARGET_XFER_EOF;
- }
-
- if (writebuf)
- ret = write (fd, writebuf, (size_t) len);
- else if (readbuf)
- ret = read (fd, readbuf, (size_t) len);
-
- close (fd);
-
- if (ret < 0)
- return TARGET_XFER_E_IO;
- else if (ret == 0)
- return TARGET_XFER_EOF;
- else
- {
- *xfered_len = (ULONGEST) ret;
- return TARGET_XFER_OK;
- }
-}
-
-
/* Parse LINE as a signal set and add its set bits to SIGS. */
static void
NULL,
&setdebuglist, &showdebuglist);
- /* Save this mask as the default. */
- sigprocmask (SIG_SETMASK, NULL, &normal_mask);
-
/* Install a SIGCHLD handler. */
sigchld_action.sa_handler = sigchld_handler;
sigemptyset (&sigchld_action.sa_mask);
sigaction (SIGCHLD, &sigchld_action, NULL);
/* Make sure we don't block SIGCHLD during a sigsuspend. */
- sigprocmask (SIG_SETMASK, NULL, &suspend_mask);
+ gdb_sigmask (SIG_SETMASK, NULL, &suspend_mask);
sigdelset (&suspend_mask, SIGCHLD);
sigemptyset (&blocked_mask);
projects / deliverable / binutils-gdb.git / blobdiff