struct lwp_info;
-struct linux_target_ops
-{
- int decr_pc_after_break;
- int (*breakpoint_at) (CORE_ADDR pc);
-
- /* Breakpoint and watchpoint related functions. See target.h for
- comments. */
- int (*supports_z_point_type) (char z_type);
- int (*insert_point) (enum raw_bkpt_type type, CORE_ADDR addr,
- int size, struct raw_breakpoint *bp);
- int (*remove_point) (enum raw_bkpt_type type, CORE_ADDR addr,
- int size, struct raw_breakpoint *bp);
-
- int (*stopped_by_watchpoint) (void);
- CORE_ADDR (*stopped_data_address) (void);
-
- /* Hooks to reformat register data for PEEKUSR/POKEUSR (in particular
- for registers smaller than an xfer unit). */
- void (*collect_ptrace_register) (struct regcache *regcache,
- int regno, char *buf);
- void (*supply_ptrace_register) (struct regcache *regcache,
- int regno, const char *buf);
-
- /* Hook to convert from target format to ptrace format and back.
- Returns true if any conversion was done; false otherwise.
- If DIRECTION is 1, then copy from INF to NATIVE.
- If DIRECTION is 0, copy from NATIVE to INF. */
- int (*siginfo_fixup) (siginfo_t *native, gdb_byte *inf, int direction);
-
- /* Hook to call when a new process is created or attached to.
- If extra per-process architecture-specific data is needed,
- allocate it here. */
- struct arch_process_info * (*new_process) (void);
-
- /* Hook to call when a process is being deleted. If extra per-process
- architecture-specific data is needed, delete it here. */
- void (*delete_process) (struct arch_process_info *info);
-
- /* Hook to call when a new thread is detected.
- If extra per-thread architecture-specific data is needed,
- allocate it here. */
- void (*new_thread) (struct lwp_info *);
-
- /* Hook to call when a thread is being deleted. If extra per-thread
- architecture-specific data is needed, delete it here. */
- void (*delete_thread) (struct arch_lwp_info *);
-
- /* Hook to call, if any, when a new fork is attached. */
- void (*new_fork) (struct process_info *parent, struct process_info *child);
-
- /* Hook to call prior to resuming a thread. */
- void (*prepare_to_resume) (struct lwp_info *);
-
- /* Hook to support target specific qSupported. */
- void (*process_qsupported) (char **, int count);
-
- /* Returns true if the low target supports tracepoints. */
- int (*supports_tracepoints) (void);
-
- /* Fill ADDRP with the thread area address of LWPID. Returns 0 on
- success, -1 on failure. */
- int (*get_thread_area) (int lwpid, CORE_ADDR *addrp);
-
- /* Install a fast tracepoint jump pad. See target.h for
- comments. */
- int (*install_fast_tracepoint_jump_pad) (CORE_ADDR tpoint, CORE_ADDR tpaddr,
- CORE_ADDR collector,
- CORE_ADDR lockaddr,
- ULONGEST orig_size,
- CORE_ADDR *jump_entry,
- CORE_ADDR *trampoline,
- ULONGEST *trampoline_size,
- unsigned char *jjump_pad_insn,
- ULONGEST *jjump_pad_insn_size,
- CORE_ADDR *adjusted_insn_addr,
- CORE_ADDR *adjusted_insn_addr_end,
- char *err);
-
- /* Return the bytecode operations vector for the current inferior.
- Returns NULL if bytecode compilation is not supported. */
- struct emit_ops *(*emit_ops) (void);
-
- /* Return the minimum length of an instruction that can be safely overwritten
- for use as a fast tracepoint. */
- int (*get_min_fast_tracepoint_insn_len) (void);
-
- /* Returns true if the low target supports range stepping. */
- int (*supports_range_stepping) (void);
-
- /* See target.h. */
- int (*supports_hardware_single_step) (void);
-
- /* Fill *SYSNO with the syscall nr trapped. Only to be called when
- inferior is stopped due to SYSCALL_SIGTRAP. */
- void (*get_syscall_trapinfo) (struct regcache *regcache, int *sysno);
-
- /* See target.h. */
- int (*get_ipa_tdesc_idx) (void);
-};
-
-extern struct linux_target_ops the_low_target;
-
/* Target ops definitions for a Linux target. */
class linux_process_target : public process_stratum_target
int read_auxv (CORE_ADDR offset, unsigned char *myaddr,
unsigned int len) override;
- bool supports_z_point_type (char z_type) override;
-
int insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
int size, raw_breakpoint *bp) override;
unsigned char *myaddr, unsigned int len) override;
#endif
- void process_qsupported (char **features, int count) override;
-
- bool supports_tracepoints () override;
-
CORE_ADDR read_pc (regcache *regcache) override;
void write_pc (regcache *regcache, CORE_ADDR pc) override;
void stabilize_threads () override;
- bool supports_fast_tracepoints () override;
-
- int install_fast_tracepoint_jump_pad (CORE_ADDR tpoint,
- CORE_ADDR tpaddr,
- CORE_ADDR collector,
- CORE_ADDR lockaddr,
- ULONGEST orig_size,
- CORE_ADDR *jump_entry,
- CORE_ADDR *trampoline,
- ULONGEST *trampoline_size,
- unsigned char *jjump_pad_insn,
- ULONGEST *jjump_pad_insn_size,
- CORE_ADDR *adjusted_insn_addr,
- CORE_ADDR *adjusted_insn_addr_end,
- char *err) override;
-
- int get_min_fast_tracepoint_insn_len () override;
-
- struct emit_ops *emit_ops () override;
-
bool supports_disable_randomization () override;
bool supports_qxfer_libraries_svr4 () override;
bool supports_catch_syscall () override;
- int get_ipa_tdesc_idx () override;
-
/* Return the information to access registers. This has public
visibility because proc-service uses it. */
virtual const regs_info *get_regs_info () = 0;
events. */
void complete_ongoing_step_over ();
+ /* Finish a step-over. Reinsert the breakpoint we had uninserted in
+ start_step_over, if still there, and delete any single-step
+ breakpoints we've set, on non hardware single-step targets.
+ Return true if step over finished. */
+ bool finish_step_over (lwp_info *lwp);
+
/* When we finish a step-over, set threads running again. If there's
another thread that may need a step-over, now's the time to start
it. Eventually, we'll move all threads past their breakpoints. */
or can't single step. */
int single_step (lwp_info* lwp);
+ /* Return true if THREAD is doing hardware single step. */
+ bool maybe_hw_step (thread_info *thread);
+
/* Install breakpoints for software single stepping. */
void install_software_single_step_breakpoints (lwp_info *lwp);
+ /* Fetch the possibly triggered data watchpoint info and store it in
+ CHILD.
+
+ On some archs, like x86, that use debug registers to set
+ watchpoints, it's possible that the way to know which watched
+ address trapped, is to check the register that is used to select
+ which address to watch. Problem is, between setting the watchpoint
+ and reading back which data address trapped, the user may change
+ the set of watchpoints, and, as a consequence, GDB changes the
+ debug registers in the inferior. To avoid reading back a stale
+ stopped-data-address when that happens, we cache in LP the fact
+ that a watchpoint trapped, and the corresponding data address, as
+ soon as we see CHILD stop with a SIGTRAP. If GDB changes the debug
+ registers meanwhile, we have the cached data we can rely on. */
+ bool check_stopped_by_watchpoint (lwp_info *child);
+
+ /* Convert a native/host siginfo object, into/from the siginfo in the
+ layout of the inferiors' architecture. */
+ void siginfo_fixup (siginfo_t *siginfo, gdb_byte *inf_siginfo,
+ int direction);
+
+ /* Add a process to the common process list, and set its private
+ data. */
+ process_info *add_linux_process (int pid, int attached);
+
+ /* Add a new thread. */
+ lwp_info *add_lwp (ptid_t ptid);
+
+ /* Delete a thread. */
+ void delete_lwp (lwp_info *lwp);
+
+public: /* Make this public because it's used from outside. */
+ /* Attach to an inferior process. Returns 0 on success, ERRNO on
+ error. */
+ int attach_lwp (ptid_t ptid);
+
+private: /* Back to private. */
+ /* Detach from LWP. */
+ void detach_one_lwp (lwp_info *lwp);
+
+ /* Detect zombie thread group leaders, and "exit" them. We can't
+ reap their exits until all other threads in the group have
+ exited. */
+ void check_zombie_leaders ();
+
+ /* Convenience function that is called when the kernel reports an exit
+ event. This decides whether to report the event to GDB as a
+ process exit event, a thread exit event, or to suppress the
+ event. */
+ ptid_t filter_exit_event (lwp_info *event_child,
+ target_waitstatus *ourstatus);
+
+ /* Returns true if THREAD is stopped in a jump pad, and we can't
+ move it out, because we need to report the stop event to GDB. For
+ example, if the user puts a breakpoint in the jump pad, it's
+ because she wants to debug it. */
+ bool stuck_in_jump_pad (thread_info *thread);
+
+ /* Convenience wrapper. Returns information about LWP's fast tracepoint
+ collection status. */
+ fast_tpoint_collect_result linux_fast_tracepoint_collecting
+ (lwp_info *lwp, fast_tpoint_collect_status *status);
+
+ /* This function should only be called if LWP got a SYSCALL_SIGTRAP.
+ Fill *SYSNO with the syscall nr trapped. */
+ void get_syscall_trapinfo (lwp_info *lwp, int *sysno);
+
+ /* Returns true if GDB is interested in the event_child syscall.
+ Only to be called when stopped reason is SYSCALL_SIGTRAP. */
+ bool gdb_catch_this_syscall (lwp_info *event_child);
+
protected:
/* The architecture-specific "low" methods are listed below. */
Targets that override this method should also override
'supports_software_single_step' to return true. */
virtual std::vector<CORE_ADDR> low_get_next_pcs (regcache *regcache);
+
+ /* Return true if there is a breakpoint at PC. */
+ virtual bool low_breakpoint_at (CORE_ADDR pc) = 0;
+
+ /* Breakpoint and watchpoint related functions. See target.h for
+ comments. */
+ virtual int low_insert_point (raw_bkpt_type type, CORE_ADDR addr,
+ int size, raw_breakpoint *bp);
+
+ virtual int low_remove_point (raw_bkpt_type type, CORE_ADDR addr,
+ int size, raw_breakpoint *bp);
+
+ virtual bool low_stopped_by_watchpoint ();
+
+ virtual CORE_ADDR low_stopped_data_address ();
+
+ /* Hooks to reformat register data for PEEKUSR/POKEUSR (in particular
+ for registers smaller than an xfer unit). */
+ virtual void low_collect_ptrace_register (regcache *regcache, int regno,
+ char *buf);
+
+ virtual void low_supply_ptrace_register (regcache *regcache, int regno,
+ const char *buf);
+
+ /* Hook to convert from target format to ptrace format and back.
+ Returns true if any conversion was done; false otherwise.
+ If DIRECTION is 1, then copy from INF to NATIVE.
+ If DIRECTION is 0, copy from NATIVE to INF. */
+ virtual bool low_siginfo_fixup (siginfo_t *native, gdb_byte *inf,
+ int direction);
+
+ /* Hook to call when a new process is created or attached to.
+ If extra per-process architecture-specific data is needed,
+ allocate it here. */
+ virtual arch_process_info *low_new_process ();
+
+ /* Hook to call when a process is being deleted. If extra per-process
+ architecture-specific data is needed, delete it here. */
+ virtual void low_delete_process (arch_process_info *info);
+
+ /* Hook to call when a new thread is detected.
+ If extra per-thread architecture-specific data is needed,
+ allocate it here. */
+ virtual void low_new_thread (lwp_info *);
+
+ /* Hook to call when a thread is being deleted. If extra per-thread
+ architecture-specific data is needed, delete it here. */
+ virtual void low_delete_thread (arch_lwp_info *);
+
+ /* Hook to call, if any, when a new fork is attached. */
+ virtual void low_new_fork (process_info *parent, process_info *child);
+
+ /* Hook to call prior to resuming a thread. */
+ virtual void low_prepare_to_resume (lwp_info *lwp);
+
+ /* Fill ADDRP with the thread area address of LWPID. Returns 0 on
+ success, -1 on failure. */
+ virtual int low_get_thread_area (int lwpid, CORE_ADDR *addrp);
+
+ /* Returns true if the low target supports range stepping. */
+ virtual bool low_supports_range_stepping ();
+
+ /* Return true if the target supports catch syscall. Such targets
+ override the low_get_syscall_trapinfo method below. */
+ virtual bool low_supports_catch_syscall ();
+
+ /* Fill *SYSNO with the syscall nr trapped. Only to be called when
+ inferior is stopped due to SYSCALL_SIGTRAP. */
+ virtual void low_get_syscall_trapinfo (regcache *regcache, int *sysno);
+
+ /* How many bytes the PC should be decremented after a break. */
+ virtual int low_decr_pc_after_break ();
};
extern linux_process_target *the_linux_target;
projects / deliverable / binutils-gdb.git / blobdiff