/* aarch64-dis.c -- AArch64 disassembler.
- Copyright (C) 2009-2018 Free Software Foundation, Inc.
+ Copyright (C) 2009-2020 Free Software Foundation, Inc.
Contributed by ARM Ltd.
This file is part of the GNU opcodes library.
static enum map_type last_type;
static int last_mapping_sym = -1;
+static bfd_vma last_stop_offset = 0;
static bfd_vma last_mapping_addr = 0;
/* Other options */
}
/* Sign-extend bit I of VALUE. */
-static inline int32_t
+static inline uint64_t
sign_extend (aarch64_insn value, unsigned i)
{
- uint32_t ret = value;
+ uint64_t ret, sign;
assert (i < 32);
- if ((value >> i) & 0x1)
- {
- uint32_t val = (uint32_t)(-1) << i;
- ret = ret | val;
- }
- return (int32_t) ret;
+ ret = value;
+ sign = (uint64_t) 1 << i;
+ return ((ret & (sign + sign - 1)) ^ sign) - sign;
}
/* N.B. the following inline helpfer functions create a dependency on the
/* Operand extractors. */
+bfd_boolean
+aarch64_ext_none (const aarch64_operand *self ATTRIBUTE_UNUSED,
+ aarch64_opnd_info *info ATTRIBUTE_UNUSED,
+ const aarch64_insn code ATTRIBUTE_UNUSED,
+ const aarch64_inst *inst ATTRIBUTE_UNUSED,
+ aarch64_operand_error *errors ATTRIBUTE_UNUSED)
+{
+ return TRUE;
+}
+
bfd_boolean
aarch64_ext_regno (const aarch64_operand *self, aarch64_opnd_info *info,
const aarch64_insn code,
switch (info->qualifier)
{
case AARCH64_OPND_QLF_S_4B:
+ case AARCH64_OPND_QLF_S_2H:
/* L:H */
info->reglane.index = extract_fields (code, 0, 2, FLD_H, FLD_L);
info->reglane.regno &= 0x1f;
const aarch64_inst *inst ATTRIBUTE_UNUSED,
aarch64_operand_error *errors ATTRIBUTE_UNUSED)
{
- int64_t imm;
+ uint64_t imm;
imm = extract_all_fields (self, code);
return TRUE;
}
-
-
-/* Decode the address operand for e.g. STGV <Xt>, [<Xn|SP>]!. */
-bfd_boolean
-aarch64_ext_addr_simple_2 (const aarch64_operand *self ATTRIBUTE_UNUSED,
- aarch64_opnd_info *info,
- aarch64_insn code,
- const aarch64_inst *inst ATTRIBUTE_UNUSED,
- aarch64_operand_error *errors ATTRIBUTE_UNUSED)
-{
- /* Rn */
- info->addr.base_regno = extract_field (FLD_Rn, code, 0);
- info->addr.writeback = 1;
- info->addr.preind = 1;
- return TRUE;
-}
-
/* Decode the address operand for e.g.
stlur <Xt>, [<Xn|SP>{, <amount>}]. */
bfd_boolean
variant = i - 1;
break;
+ case sve_size_bh:
case sve_size_sd:
variant = extract_field (FLD_SVE_sz, inst->value, 0);
break;
+ case sve_size_sd2:
+ variant = extract_field (FLD_SVE_sz2, inst->value, 0);
+ break;
+
+ case sve_size_hsd2:
+ i = extract_field (FLD_SVE_size, inst->value, 0);
+ if (i < 1)
+ return FALSE;
+ variant = i - 1;
+ break;
+
+ case sve_size_13:
+ /* Ignore low bit of this field since that is set in the opcode for
+ instructions of this iclass. */
+ i = (extract_field (FLD_size, inst->value, 0) & 2);
+ variant = (i >> 1);
+ break;
+
+ case sve_shift_tsz_bhsd:
+ i = extract_fields (inst->value, 0, 2, FLD_SVE_tszh, FLD_SVE_tszl_19);
+ if (i == 0)
+ return FALSE;
+ while (i != 1)
+ {
+ i >>= 1;
+ variant += 1;
+ }
+ break;
+
+ case sve_size_tsz_bhs:
+ i = extract_fields (inst->value, 0, 2, FLD_SVE_sz, FLD_SVE_tszl_19);
+ if (i == 0)
+ return FALSE;
+ while (i != 1)
+ {
+ if (i & 1)
+ return FALSE;
+ i >>= 1;
+ variant += 1;
+ }
+ break;
+
+ case sve_shift_tsz_hsd:
+ i = extract_fields (inst->value, 0, 2, FLD_SVE_sz, FLD_SVE_tszl_19);
+ if (i == 0)
+ return FALSE;
+ while (i != 1)
+ {
+ i >>= 1;
+ variant += 1;
+ }
+ break;
+
default:
/* No mapping between instruction class and qualifiers. */
return TRUE;
DEBUG_TRACE ("constraint matching FAIL");
}
-decode_fail:
+ decode_fail:
return FALSE;
}
\f
/* Aarch64 instructions are always little-endian */
info->endian_code = BFD_ENDIAN_LITTLE;
+ /* Default to DATA. A text section is required by the ABI to contain an
+ INSN mapping symbol at the start. A data section has no such
+ requirement, hence if no mapping symbol is found the section must
+ contain only data. This however isn't very useful if the user has
+ fully stripped the binaries. If this is the case use the section
+ attributes to determine the default. If we have no section default to
+ INSN as well, as we may be disassembling some raw bytes on a baremetal
+ HEX file or similar. */
+ enum map_type type = MAP_DATA;
+ if ((info->section && info->section->flags & SEC_CODE) || !info->section)
+ type = MAP_INSN;
+
/* First check the full symtab for a mapping symbol, even if there
are no usable non-mapping symbols for this address. */
if (info->symtab_size != 0
&& bfd_asymbol_flavour (*info->symtab) == bfd_target_elf_flavour)
{
- enum map_type type = MAP_INSN;
int last_sym = -1;
- bfd_vma addr;
+ bfd_vma addr, section_vma = 0;
+ bfd_boolean can_use_search_opt_p;
int n;
if (pc <= last_mapping_addr)
/* Start scanning at the start of the function, or wherever
we finished last time. */
n = info->symtab_pos + 1;
- if (n < last_mapping_sym)
+
+ /* If the last stop offset is different from the current one it means we
+ are disassembling a different glob of bytes. As such the optimization
+ would not be safe and we should start over. */
+ can_use_search_opt_p = last_mapping_sym >= 0
+ && info->stop_offset == last_stop_offset;
+
+ if (n >= last_mapping_sym && can_use_search_opt_p)
n = last_mapping_sym;
- /* Scan up to the location being disassembled. */
+ /* Look down while we haven't passed the location being disassembled.
+ The reason for this is that there's no defined order between a symbol
+ and an mapping symbol that may be at the same address. We may have to
+ look at least one position ahead. */
for (; n < info->symtab_size; n++)
{
addr = bfd_asymbol_value (info->symtab[n]);
if (!found)
{
n = info->symtab_pos;
- if (n < last_mapping_sym)
+ if (n >= last_mapping_sym && can_use_search_opt_p)
n = last_mapping_sym;
/* No mapping symbol found at this address. Look backwards
- for a preceeding one. */
+ for a preceeding one, but don't go pass the section start
+ otherwise a data section with no mapping symbol can pick up
+ a text mapping symbol of a preceeding section. The documentation
+ says section can be NULL, in which case we will seek up all the
+ way to the top. */
+ if (info->section)
+ section_vma = info->section->vma;
+
for (; n >= 0; n--)
{
+ addr = bfd_asymbol_value (info->symtab[n]);
+ if (addr < section_vma)
+ break;
+
if (get_sym_code_type (info, n, &type))
{
last_sym = n;
last_mapping_sym = last_sym;
last_type = type;
+ last_stop_offset = info->stop_offset;
/* Look a little bit ahead to see if we should print out
less than four bytes of data. If there's a symbol,
size = (pc & 1) ? 1 : 2;
}
}
+ else
+ last_type = type;
- if (last_type == MAP_DATA)
+ /* PR 10263: Disassemble data if requested to do so by the user. */
+ if (last_type == MAP_DATA && ((info->flags & DISASSEMBLE_DATA) == 0))
{
/* size was set above. */
info->bytes_per_chunk = size;
projects / deliverable / binutils-gdb.git / blobdiff