X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=drivers%2Fgpio%2FKconfig;h=fcbd8e318474d98b8fa3d7f5b2e5835b5b8414eb;hb=f770d3b26a410a0bbb2c8f302d35b634e3bfb0c2;hp=b469c0e1adc70e43dfe225b2e0f3f658796bca52;hpb=0d85ff00d9ab8d471f29fe206c639add5c17c26c;p=deliverable%2Flinux.git

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b469c0e1adc7..fcbd8e318474 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -10,27 +10,6 @@ config ARCH_HAVE_CUSTOM_GPIO_H
 	  overriding the default implementations.  New uses of this are
 	  strongly discouraged.
 
-config ARCH_WANT_OPTIONAL_GPIOLIB
-	bool
-	help
-	  Select this config option from the architecture Kconfig, if
-	  it is possible to use gpiolib on the architecture, but let the
-	  user decide whether to actually build it or not.
-	  Select this instead of ARCH_REQUIRE_GPIOLIB, if your architecture does
-	  not depend on GPIOs being available, but rather let the user
-	  decide whether he needs it or not.
-
-config ARCH_REQUIRE_GPIOLIB
-	bool
-	select GPIOLIB
-	help
-	  Platforms select gpiolib if they use this infrastructure
-	  for all their GPIOs, usually starting with ones integrated
-	  into SOC processors.
-	  Selecting this from the architecture code will cause the gpiolib
-	  code to always get built in.
-
-
 menuconfig GPIOLIB
 	bool "GPIO Support"
 	select ANON_INODES
@@ -128,6 +107,13 @@ config GPIO_AMDPT
 	  driver for GPIO functionality on Promontory IOHub
 	  Require ACPI ASL code to enumerate as a platform device.
 
+config GPIO_ASPEED
+	tristate "Aspeed GPIO support"
+	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.
+
 config GPIO_ATH79
 	tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
 	default y if ATH79
@@ -138,6 +124,12 @@ config GPIO_ATH79
 	  Select this option to enable GPIO driver for
 	  Atheros AR71XX/AR724X/AR913X SoC devices.
 
+config GPIO_AXP209
+	tristate "X-Powers AXP209 PMIC GPIO Support"
+	depends on MFD_AXP20X
+	help
+	  Say yes to enable GPIO support for the AXP209 PMIC
+
 config GPIO_BCM_KONA
 	bool "Broadcom Kona GPIO"
 	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
@@ -237,7 +229,8 @@ config GPIO_ICH
 
 config GPIO_IOP
 	tristate "Intel IOP GPIO"
-	depends on ARM && (ARCH_IOP32X || ARCH_IOP33X)
+	depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
+	select GPIO_GENERIC
 	help
 	  Say yes here to support the GPIO functionality of a number of Intel
 	  IOP32X or IOP33X.
@@ -574,6 +567,19 @@ config GPIO_F7188X
 	  To compile this driver as a module, choose M here: the module will
 	  be called f7188x-gpio.
 
+config GPIO_GPIO_MM
+	tristate "Diamond Systems GPIO-MM GPIO support"
+	depends on ISA_BUS_API
+	help
+	  Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
+
+	  The Diamond Systems GPIO-MM device features 48 lines of digital I/O
+	  via the emulation of dual 82C55A PPI chips. This driver provides GPIO
+	  support for these 48 channels of digital I/O.
+
+	  The base port addresses for the devices may be configured via the base
+	  array module parameter.
+
 config GPIO_IT87
 	tristate "IT87xx GPIO support"
 	help
@@ -780,6 +786,13 @@ config GPIO_TPIC2810
 	  To compile this driver as a module, choose M here: the module will
 	  be called gpio-tpic2810.
 
+config GPIO_TS4900
+	tristate "Technologic Systems FPGA I2C GPIO"
+	select REGMAP_I2C
+	help
+	  Say yes here to enabled the GPIO driver for Technologic's FPGA core.
+	  Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
+
 endmenu
 
 menu "MFD GPIO expanders"
@@ -995,6 +1008,19 @@ config GPIO_UCB1400
 	  This enables support for the Philips UCB1400 GPIO pins.
 	  The UCB1400 is an AC97 audio codec.
 
+config GPIO_WHISKEY_COVE
+	tristate "GPIO support for Whiskey Cove PMIC"
+	depends on INTEL_SOC_PMIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Support for GPIO pins on Whiskey Cove PMIC.
+
+	  Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC
+	  inside.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called gpio-wcove.
+
 config GPIO_WM831X
 	tristate "WM831x GPIOs"
 	depends on MFD_WM831X