X-Git-Url: http://git.efficios.com/?a=blobdiff_plain;f=install-sh;h=0b0fdcbba69ab6dd05ca162a5328828d46ab1d54;hb=refs%2Fheads%2Fconcurrent-displaced-stepping-2020-04-01;hp=0ec27bcd488da5cad6ead13d70accbdbc40d31ef;hpb=ee949b5e7afab172f86607438ec9440937f26114;p=deliverable%2Fbinutils-gdb.git diff --git a/install-sh b/install-sh index 0ec27bcd48..0b0fdcbba6 100755 --- a/install-sh +++ b/install-sh @@ -1,7 +1,8 @@ #!/bin/sh -# # install - install a program, script, or datafile -# + +scriptversion=2013-12-25.23; # UTC + # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. @@ -34,261 +35,467 @@ # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. +tab=' ' +nl=' +' +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" +doit=${DOITPROG-} +doit_exec=${doit:-exec} +# Put in absolute file names if you don't have them in your path; +# or use environment vars. -# put in absolute paths if you don't have them in your path; or use env. vars. +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +posix_mkdir= -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd=$cpprog - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "$0: no input file specified" >&2 - exit 1 -else - : -fi +# Desired mode of installed file. +mode=0755 -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d "$dst" ]; then - instcmd=: - chmodcmd="" - else - instcmd=$mkdirprog - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f "$src" ] || [ -d "$src" ] - then - : - else - echo "$0: $src does not exist" >&2 - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "$0: no destination specified" >&2 - exit 1 - else - : - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d "$dst" ] - then - dst=$dst/`basename "$src"` - else - : - fi -fi +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= -## this sed command emulates the dirname command -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` +src= +dst= +dir_arg= +dst_arg= -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script +copy_on_change=false +is_target_a_directory=possibly -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' - ' -IFS="${IFS-$defaultIFS}" +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... -oIFS=$IFS -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS=$oIFS +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. -pathcomp='' +Options: + --help display this help and exit. + --version display version info and exit. -while [ $# -ne 0 ] ; do - pathcomp=$pathcomp$1 - shift + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. - if [ ! -d "$pathcomp" ] ; - then - $mkdirprog "$pathcomp" - else - : - fi +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" - pathcomp=$pathcomp/ -done -fi +while test $# -ne 0; do + case $1 in + -c) ;; -if [ x"$dir_arg" != x ] -then - $doit $instcmd "$dst" && + -C) copy_on_change=true;; - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi -else + -d) dir_arg=true;; -# If we're going to rename the final executable, determine the name now. + -g) chgrpcmd="$chgrpprog $2" + shift;; - if [ x"$transformarg" = x ] - then - dstfile=`basename "$dst"` - else - dstfile=`basename "$dst" $transformbasename | - sed $transformarg`$transformbasename - fi + --help) echo "$usage"; exit $?;; -# don't allow the sed command to completely eliminate the filename + -m) mode=$2 + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; - if [ x"$dstfile" = x ] - then - dstfile=`basename "$dst"` - else - : - fi + -o) chowncmd="$chownprog $2" + shift;; -# Make a couple of temp file names in the proper directory. + -s) stripcmd=$stripprog;; - dsttmp=$dstdir/#inst.$$# - rmtmp=$dstdir/#rm.$$# + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; -# Trap to clean up temp files at exit. + -T) is_target_a_directory=never;; - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 + --version) echo "$0 $scriptversion"; exit $?;; -# Move or copy the file name to the temp name + --) shift + break;; - $doit $instcmd "$src" "$dsttmp" && + -*) echo "$0: invalid option: $1" >&2 + exit 1;; -# and set any options; do chmod last to preserve setuid bits + *) break;; + esac + shift +done -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. - if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi -# Now remove or move aside any old file at destination location. We try this -# two ways since rm can't unlink itself on some systems and the destination -# file might be busy for other reasons. In this case, the final cleanup -# might fail but the new file should still install successfully. +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi -{ - if [ -f "$dstdir/$dstfile" ] - then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || - $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || - { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi -} && +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi -# Now rename the file to the real destination. +if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi -fi && +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + dstdir=`dirname "$dst"` + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac -# The final little trick to "correctly" pass the exit status to the exit trap. + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + oIFS=$IFS + IFS=/ + set -f + set fnord $dstdir + shift + set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + set +f && + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done -{ - (exit 0); exit -} +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: