net: mvneta: properly configure the MAC <-> PHY connection in all situations

net: mvneta: properly configure the MAC <-> PHY connection in all situations

Commit 5445eaf309ff ('mvneta: Try to fix mvneta when compiled as
module') fixed the mvneta driver to make it work properly when loaded
as a module in SGMII configuration, which was tested successful by the
author on the Armada XP OpenBlocks AX3, which uses SGMII.

However, some other platforms, namely the Armada XP GP don't use
SGMII, but a QSGMII connection between the MAC and the PHY, and this
case was not supported by the mvneta driver, which was relying on
configuration put in place by the bootloader. While this works when
the mvneta driver is built-in (because clocks are not gated), it
breaks when mvneta is built as a module, because the clock is gated
(all configuration is lost) and then re-enabled when the mvneta driver
is loaded.

In order to support all of RGMII, SGMII and QSGMII, this commit
reworks how the PHY interface configuration is done, and simplifies
it: it removes the mvneta_port_sgmii_config() and
mvneta_gmac_rgmii_set() functions, which were strange because
mvneta_gmac_rgmii_set() was called in all cases, even for SGMII
configurations. Also, the mvneta_gmac_rgmii_set() function was taking
a boolean as argument, which was always true.

Instead, all the PHY interface configuration logic is moved into the
mvneta_port_power_up() function, in a much simpler 'switch' construct,
with four cases:

 - QSGMII: the RGMIIEn bit, the PCSEn bit in GMAC_CTRL_2 are set, and
   the SERDES is configured in QSGMII. Technically speaking,
   configuring the SERDES of the first port would be sufficient, but
   it is simpler to do it on all ports.

 - SGMII: the RGMIIEn bit, the PCSEn bit in GMAC_CTRL_2 are set, and
   the SERDES is configured as SGMII.

 - RGMII: the RGMIIEn bit in GMAC_CTRL_2 is set. The PCSEn bit is kept
   cleared, and no SERDES configuration is done, because RGMII is not
   using SERDES lanes.

 - other: an error is returned. For this reason, the
   mvneta_port_power_up() now returns an int instead of nothing, and
   the return value is checked by mvneta_probe().

This has been successfully tested on:

 * Armada XP DB, which has two RGMII and two SGMII connections
 * Armada XP GP, which uses QSGMII for its four interfaces
 * Armada 370 Mirabox, which has two RGMII connections

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>