arm64: dts: msm8996: add support to blsp1_i2c2 device

This patch adds blsp1_i2c2 support, as this bus is used on some of the
apq8096 boards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a1605f7a71967cb677b14a1672600e781c182899..5536bfc71a754abcbb173ffde926033570167303 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -171,6 +171,21 @@
                        status = "disabled";
                };
 
+               blsp1_i2c2: i2c@07577000 {
+                       compatible = "qcom,i2c-qup-v2.2.1";
+                       reg = <0x07577000 0x1000>;
+                       interrupts = <GIC_SPI 97 0>;
+                       clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+                               <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+                       clock-names = "iface", "core";
+                       pinctrl-names = "default", "sleep";
+                       pinctrl-0 = <&blsp1_i2c2_default>;
+                       pinctrl-1 = <&blsp1_i2c2_sleep>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
                msmgpio: pinctrl@1010000 {
                        compatible = "qcom,msm8996-pinctrl";
                        reg = <0x01010000 0x300000>;