* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include "via-core.h"
#include "global.h"
/*
u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
- engine = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
- viapar->shared->engine_mmio = engine;
+ engine = viapar->shared->vdev->engine_mmio;
if (!engine) {
printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
"hardware acceleration disabled\n");
struct viafb_par *viapar = info->par;
u32 temp, iga_path = viapar->iga_path;
- temp = readl(viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
+ temp = readl(viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
switch (Status) {
case HW_Cursor_ON:
temp |= 0x1;
default:
temp &= 0x7FFFFFFF;
}
- writel(temp, viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
+ writel(temp, viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
}
void viafb_wait_engine_idle(struct fb_info *info)
struct viafb_par *viapar = info->par;
int loop = 0;
u32 mask;
+ void __iomem *engine = viapar->shared->vdev->engine_mmio;
switch (viapar->shared->chip_info.twod_engine) {
case VIA_2D_ENG_H5:
VIA_3D_ENG_BUSY_M1;
break;
default:
- while (!(readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
+ while (!(readl(engine + VIA_REG_STATUS) &
VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
loop++;
cpu_relax();
break;
}
- while ((readl(viapar->shared->engine_mmio + VIA_REG_STATUS) & mask) &&
- (loop < MAXLOOP)) {
+ while ((readl(engine + VIA_REG_STATUS) & mask) && (loop < MAXLOOP)) {
loop++;
cpu_relax();
}
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include "via-core.h"
+#include "via_i2c.h"
#include "global.h"
static void tmds_register_write(int index, u8 data);
#include "debug.h"
-#include "via-core.h"
#include "viafbdev.h"
#include "chip.h"
#include "accel.h"
#include "share.h"
#include "dvi.h"
#include "viamode.h"
-#include "via_i2c.h"
#include "hw.h"
#include "lcd.h"
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-
+#include "via-core.h"
#include "global.h"
static struct pll_map pll_value[] = {
static void set_dvi_output_path(int set_iga, int output_interface);
static void set_lcd_output_path(int set_iga, int output_interface);
static void load_fix_bit_crtc_reg(void);
-static void init_gfx_chip_info(struct pci_dev *pdev,
- const struct pci_device_id *pdi);
+static void init_gfx_chip_info(int chip_type);
static void init_tmds_chip_info(void);
static void init_lvds_chip_info(void);
static void device_screen_off(void);
}
-void viafb_init_chip_info(struct pci_dev *pdev,
- const struct pci_device_id *pdi)
+void viafb_init_chip_info(int chip_type)
{
- init_gfx_chip_info(pdev, pdi);
+ init_gfx_chip_info(chip_type);
init_tmds_chip_info();
init_lvds_chip_info();
}
}
-static void init_gfx_chip_info(struct pci_dev *pdev,
- const struct pci_device_id *pdi)
+static void init_gfx_chip_info(int chip_type)
{
u8 tmp;
- viaparinfo->chip_info->gfx_chip_name = pdi->driver_data;
+ viaparinfo->chip_info->gfx_chip_name = chip_type;
/* Check revision of CLE266 Chip */
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
viafb_write_reg_mask(CR6A, VIACR, BIT6, BIT6);
}
-static u_int16_t via_function3[] = {
- CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3,
- CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3,
- P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3,
-};
-
-/* Get the BIOS-configured framebuffer size from PCI configuration space
- * of function 3 in the respective chipset */
-int viafb_get_fb_size_from_pci(void)
-{
- int i;
- u_int8_t offset = 0;
- u_int32_t FBSize;
- u_int32_t VideoMemSize;
-
- /* search for the "FUNCTION3" device in this chipset */
- for (i = 0; i < ARRAY_SIZE(via_function3); i++) {
- struct pci_dev *pdev;
-
- pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i],
- NULL);
- if (!pdev)
- continue;
-
- DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device);
-
- switch (pdev->device) {
- case CLE266_FUNCTION3:
- case KM400_FUNCTION3:
- offset = 0xE0;
- break;
- case CN400_FUNCTION3:
- case CN700_FUNCTION3:
- case CX700_FUNCTION3:
- case KM800_FUNCTION3:
- case KM890_FUNCTION3:
- case P4M890_FUNCTION3:
- case P4M900_FUNCTION3:
- case VX800_FUNCTION3:
- case VX855_FUNCTION3:
- /*case CN750_FUNCTION3: */
- offset = 0xA0;
- break;
- }
-
- if (!offset)
- break;
-
- pci_read_config_dword(pdev, offset, &FBSize);
- pci_dev_put(pdev);
- }
-
- if (!offset) {
- printk(KERN_ERR "cannot determine framebuffer size\n");
- return -EIO;
- }
-
- FBSize = FBSize & 0x00007000;
- DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
-
- if (viaparinfo->chip_info->gfx_chip_name < UNICHROME_CX700) {
- switch (FBSize) {
- case 0x00004000:
- VideoMemSize = (16 << 20); /*16M */
- break;
-
- case 0x00005000:
- VideoMemSize = (32 << 20); /*32M */
- break;
-
- case 0x00006000:
- VideoMemSize = (64 << 20); /*64M */
- break;
-
- default:
- VideoMemSize = (32 << 20); /*32M */
- break;
- }
- } else {
- switch (FBSize) {
- case 0x00001000:
- VideoMemSize = (8 << 20); /*8M */
- break;
-
- case 0x00002000:
- VideoMemSize = (16 << 20); /*16M */
- break;
-
- case 0x00003000:
- VideoMemSize = (32 << 20); /*32M */
- break;
-
- case 0x00004000:
- VideoMemSize = (64 << 20); /*64M */
- break;
-
- case 0x00005000:
- VideoMemSize = (128 << 20); /*128M */
- break;
-
- case 0x00006000:
- VideoMemSize = (256 << 20); /*256M */
- break;
-
- case 0x00007000: /* Only on VX855/875 */
- VideoMemSize = (512 << 20); /*512M */
- break;
-
- default:
- VideoMemSize = (32 << 20); /*32M */
- break;
- }
- }
-
- return VideoMemSize;
-}
void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
*p_gfx_dpa_setting)
struct VideoModeTable *vmode_tbl1, int video_bpp1);
void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
struct VideoModeTable *vmode_tbl);
-void viafb_init_chip_info(struct pci_dev *pdev,
- const struct pci_device_id *pdi);
+void viafb_init_chip_info(int chip_type);
void viafb_init_dac(int set_iga);
int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
int viafb_get_refresh(int hres, int vres, u32 float_refresh);
void viafb_update_device_setting(int hres, int vres, int bpp,
int vmode_refresh, int flag);
-int viafb_get_fb_size_from_pci(void);
void viafb_set_iga_path(void);
void viafb_set_primary_address(u32 addr);
void viafb_set_secondary_address(u32 addr);
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
-
+#include "via-core.h"
+#include "via_i2c.h"
#include "global.h"
#include "lcdtbl.h"
/*
* Core code for the Via multifunction framebuffer device.
*/
+#include "via-core.h"
+#include "via_i2c.h"
+#include "global.h"
+
#include <linux/module.h>
#include <linux/platform_device.h>
-#include "global.h" /* Includes everything under the sun */
/*
* The default port config.
{ 0, 0, 0, 0 }
};
+/*
+ * We currently only support one viafb device (will there ever be
+ * more than one?), so just declare it globally here.
+ */
+static struct viafb_dev global_dev;
+
+
+/*
+ * Figure out how big our framebuffer memory is. Kind of ugly,
+ * but evidently we can't trust the information found in the
+ * fbdev configuration area.
+ */
+static u16 via_function3[] = {
+ CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3,
+ CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3,
+ P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3,
+};
+
+/* Get the BIOS-configured framebuffer size from PCI configuration space
+ * of function 3 in the respective chipset */
+static int viafb_get_fb_size_from_pci(int chip_type)
+{
+ int i;
+ u8 offset = 0;
+ u32 FBSize;
+ u32 VideoMemSize;
+
+ /* search for the "FUNCTION3" device in this chipset */
+ for (i = 0; i < ARRAY_SIZE(via_function3); i++) {
+ struct pci_dev *pdev;
+
+ pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i],
+ NULL);
+ if (!pdev)
+ continue;
+
+ DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device);
+
+ switch (pdev->device) {
+ case CLE266_FUNCTION3:
+ case KM400_FUNCTION3:
+ offset = 0xE0;
+ break;
+ case CN400_FUNCTION3:
+ case CN700_FUNCTION3:
+ case CX700_FUNCTION3:
+ case KM800_FUNCTION3:
+ case KM890_FUNCTION3:
+ case P4M890_FUNCTION3:
+ case P4M900_FUNCTION3:
+ case VX800_FUNCTION3:
+ case VX855_FUNCTION3:
+ /*case CN750_FUNCTION3: */
+ offset = 0xA0;
+ break;
+ }
+
+ if (!offset)
+ break;
+
+ pci_read_config_dword(pdev, offset, &FBSize);
+ pci_dev_put(pdev);
+ }
+
+ if (!offset) {
+ printk(KERN_ERR "cannot determine framebuffer size\n");
+ return -EIO;
+ }
+
+ FBSize = FBSize & 0x00007000;
+ DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
+
+ if (chip_type < UNICHROME_CX700) {
+ switch (FBSize) {
+ case 0x00004000:
+ VideoMemSize = (16 << 20); /*16M */
+ break;
+
+ case 0x00005000:
+ VideoMemSize = (32 << 20); /*32M */
+ break;
+
+ case 0x00006000:
+ VideoMemSize = (64 << 20); /*64M */
+ break;
+
+ default:
+ VideoMemSize = (32 << 20); /*32M */
+ break;
+ }
+ } else {
+ switch (FBSize) {
+ case 0x00001000:
+ VideoMemSize = (8 << 20); /*8M */
+ break;
+
+ case 0x00002000:
+ VideoMemSize = (16 << 20); /*16M */
+ break;
+
+ case 0x00003000:
+ VideoMemSize = (32 << 20); /*32M */
+ break;
+
+ case 0x00004000:
+ VideoMemSize = (64 << 20); /*64M */
+ break;
+
+ case 0x00005000:
+ VideoMemSize = (128 << 20); /*128M */
+ break;
+
+ case 0x00006000:
+ VideoMemSize = (256 << 20); /*256M */
+ break;
+
+ case 0x00007000: /* Only on VX855/875 */
+ VideoMemSize = (512 << 20); /*512M */
+ break;
+
+ default:
+ VideoMemSize = (32 << 20); /*32M */
+ break;
+ }
+ }
+
+ return VideoMemSize;
+}
+
+
+/*
+ * Figure out and map our MMIO regions.
+ */
+static int __devinit via_pci_setup_mmio(struct viafb_dev *vdev)
+{
+ /*
+ * Hook up to the device registers.
+ */
+ vdev->engine_start = pci_resource_start(vdev->pdev, 1);
+ vdev->engine_len = pci_resource_len(vdev->pdev, 1);
+ /* If this fails, others will notice later */
+ vdev->engine_mmio = ioremap_nocache(vdev->engine_start,
+ vdev->engine_len);
+
+ /*
+ * Likewise with I/O memory.
+ */
+ vdev->fbmem_start = pci_resource_start(vdev->pdev, 0);
+ vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type);
+ if (vdev->fbmem_len < 0)
+ return vdev->fbmem_len;
+ vdev->fbmem = ioremap_nocache(vdev->fbmem_start, vdev->fbmem_len);
+ if (vdev->fbmem == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+static void __devexit via_pci_teardown_mmio(struct viafb_dev *vdev)
+{
+ iounmap(vdev->fbmem);
+ iounmap(vdev->engine_mmio);
+}
+
static int __devinit via_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
ret = pci_enable_device(pdev);
if (ret)
return ret;
+ /*
+ * Global device initialization.
+ */
+ memset(&global_dev, 0, sizeof(global_dev));
+ global_dev.pdev = pdev;
+ global_dev.chip_type = ent->driver_data;
+ spin_lock_init(&global_dev.reg_lock);
+ ret = via_pci_setup_mmio(&global_dev);
+ if (ret)
+ goto out_disable;
/*
* Create the I2C busses. Bailing out on failure seems extreme,
* but that's what the code did before.
*/
ret = viafb_create_i2c_busses(adap_configs);
if (ret)
- goto out_disable;
+ goto out_teardown;
/*
* Set up the framebuffer.
*/
- ret = via_fb_pci_probe(pdev, ent);
+ ret = via_fb_pci_probe(&global_dev);
if (ret)
goto out_i2c;
return 0;
out_i2c:
viafb_delete_i2c_busses();
+out_teardown:
+ via_pci_teardown_mmio(&global_dev);
out_disable:
pci_disable_device(pdev);
return ret;
{
viafb_delete_i2c_busses();
via_fb_pci_remove(pdev);
+ via_pci_teardown_mmio(&global_dev);
pci_disable_device(pdev);
}
#ifndef __VIA_CORE_H__
#define __VIA_CORE_H__
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
/*
* A description of each known serial I2C/GPIO port.
*/
struct via_port_cfg {
enum via_port_type type;
enum via_port_mode mode;
- u_int16_t io_port;
- u_int8_t ioport_index;
+ u16 io_port;
+ u8 ioport_index;
};
+
+/*
+ * This is the global viafb "device" containing stuff needed by
+ * all subdevs.
+ */
+struct viafb_dev {
+ struct pci_dev *pdev;
+ int chip_type;
+ /*
+ * Spinlock for access to device registers. Not yet
+ * globally used.
+ */
+ spinlock_t reg_lock;
+ /*
+ * The framebuffer MMIO region. Little, if anything, touches
+ * this memory directly, and certainly nothing outside of the
+ * framebuffer device itself. We *do* have to be able to allocate
+ * chunks of this memory for other devices, though.
+ */
+ unsigned long fbmem_start;
+ long fbmem_len;
+ void __iomem *fbmem;
+ /*
+ * The MMIO region for device registers.
+ */
+ unsigned long engine_start;
+ unsigned long engine_len;
+ void __iomem *engine_mmio;
+
+};
+
#endif /* __VIA_CORE_H__ */
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include "via-core.h"
+#include "via_i2c.h"
#include "global.h"
/*
#include <linux/stat.h>
#define _MASTER_FILE
+#include "via-core.h"
#include "global.h"
static char *viafb_name = "Via";
/* Adjust var according to our driver's own table */
viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
if (info->var.accel_flags & FB_ACCELF_TEXT &&
- !ppar->shared->engine_mmio)
+ !ppar->shared->vdev->engine_mmio)
info->var.accel_flags = 0;
return 0;
rop = 0xF0;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: fillrect\n");
- if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_FILL,
+ if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_FILL,
rect->width, rect->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, rect->dx, rect->dy,
NULL, 0, 0, 0, 0, fg_color, 0, rop))
return;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: copyarea\n");
- if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_COLOR,
+ if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_COLOR,
area->width, area->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, area->dx, area->dy,
NULL, viapar->vram_addr, info->fix.line_length,
op = VIA_BITBLT_COLOR;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: imageblit\n");
- if (shared->hw_bitblt(shared->engine_mmio, op,
+ if (shared->hw_bitblt(shared->vdev->engine_mmio, op,
image->width, image->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, image->dx, image->dy,
(u32 *)image->data, 0, 0, 0, 0, fg_color, bg_color, 0))
static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
struct viafb_par *viapar = info->par;
- void __iomem *engine = viapar->shared->engine_mmio;
+ void __iomem *engine = viapar->shared->vdev->engine_mmio;
u32 temp, xx, yy, bg_color = 0, fg_color = 0,
chip_name = viapar->shared->chip_info.gfx_chip_name;
int i, j = 0, cur_size = 64;
}
-int __devinit via_fb_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
{
u32 default_xres, default_yres;
struct VideoModeTable *vmode_entry;
*/
viafbinfo = framebuffer_alloc(viafb_par_length +
ALIGN(sizeof(struct viafb_shared), BITS_PER_LONG/8),
- &pdev->dev);
+ &vdev->pdev->dev);
if (!viafbinfo) {
printk(KERN_ERR"Could not allocate memory for viafb_info.\n");
return -ENOMEM;
viaparinfo = (struct viafb_par *)viafbinfo->par;
viaparinfo->shared = viafbinfo->par + viafb_par_length;
+ viaparinfo->shared->vdev = vdev;
viaparinfo->vram_addr = 0;
viaparinfo->tmds_setting_info = &viaparinfo->shared->tmds_setting_info;
viaparinfo->lvds_setting_info = &viaparinfo->shared->lvds_setting_info;
&viaparinfo->shared->lvds_setting_info2;
viaparinfo->crt_setting_info = &viaparinfo->shared->crt_setting_info;
viaparinfo->chip_info = &viaparinfo->shared->chip_info;
- spin_lock_init(&viaparinfo->reg_lock);
if (viafb_dual_fb)
viafb_SAMM_ON = 1;
if (!viafb_SAMM_ON)
viafb_dual_fb = 0;
- viafb_init_chip_info(pdev, ent);
- viaparinfo->fbmem = pci_resource_start(pdev, 0);
- viaparinfo->memsize = viafb_get_fb_size_from_pci();
- if (viaparinfo->memsize < 0) {
- rc = viaparinfo->memsize;
- goto out_fb_release;
- }
+ viafb_init_chip_info(vdev->chip_type);
+ /*
+ * The framebuffer will have been successfully mapped by
+ * the core (or we'd not be here), but we still need to
+ * set up our own accounting.
+ */
+ viaparinfo->fbmem = vdev->fbmem_start;
+ viaparinfo->memsize = vdev->fbmem_len;
viaparinfo->fbmem_free = viaparinfo->memsize;
viaparinfo->fbmem_used = 0;
- viafbinfo->screen_base = ioremap_nocache(viaparinfo->fbmem,
- viaparinfo->memsize);
- if (!viafbinfo->screen_base) {
- printk(KERN_ERR "ioremap of fbmem failed\n");
- rc = -ENOMEM;
- goto out_fb_release;
- }
+ viafbinfo->screen_base = vdev->fbmem;
- viafbinfo->fix.mmio_start = pci_resource_start(pdev, 1);
- viafbinfo->fix.mmio_len = pci_resource_len(pdev, 1);
+ viafbinfo->fix.mmio_start = vdev->engine_start;
+ viafbinfo->fix.mmio_len = vdev->engine_len;
viafbinfo->node = 0;
viafbinfo->fbops = &viafb_ops;
viafbinfo->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
viafbinfo->var = default_var;
if (viafb_dual_fb) {
- viafbinfo1 = framebuffer_alloc(viafb_par_length, &pdev->dev);
+ viafbinfo1 = framebuffer_alloc(viafb_par_length,
+ &vdev->pdev->dev);
if (!viafbinfo1) {
printk(KERN_ERR
"allocate the second framebuffer struct error\n");
rc = -ENOMEM;
- goto out_unmap_screen;
+ goto out_fb_release;
}
viaparinfo1 = viafbinfo1->par;
memcpy(viaparinfo1, viaparinfo, viafb_par_length);
out_fb1_release:
if (viafbinfo1)
framebuffer_release(viafbinfo1);
-out_unmap_screen:
- iounmap(viafbinfo->screen_base);
out_fb_release:
framebuffer_release(viafbinfo);
return rc;
unregister_framebuffer(viafbinfo);
if (viafb_dual_fb)
unregister_framebuffer(viafbinfo1);
- iounmap((void *)viafbinfo->screen_base);
- iounmap(viaparinfo->shared->engine_mmio);
framebuffer_release(viafbinfo);
if (viafb_dual_fb)
#include "share.h"
#include "chip.h"
#include "hw.h"
-#include "via_i2c.h"
#define VERSION_MAJOR 2
#define VERSION_KERNEL 6 /* For kernel 2.6 */
struct viafb_shared {
struct proc_dir_entry *proc_entry; /*viafb proc entry */
+ struct viafb_dev *vdev; /* Global dev info */
/* All the information will be needed to set engine */
struct tmds_setting_information tmds_setting_info;
struct chip_information chip_info;
/* hardware acceleration stuff */
- void __iomem *engine_mmio;
u32 cursor_vram_addr;
u32 vq_vram_addr; /* virtual queue address in video ram */
int (*hw_bitblt)(void __iomem *engine, u8 op, u32 width, u32 height,
struct viafb_shared *shared;
- /*
- * (jc) I believe one should use locking to protect against
- * concurrent access to the device ports and registers. Thus,
- * this lock. Use of it is *far* from universal, though...
- * someday...
- */
- spinlock_t reg_lock;
-
/* All the information will be needed to set engine */
/* depreciated, use the ones in shared directly */
struct tmds_setting_information *tmds_setting_info;
void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
*plvds_setting_info, struct lvds_chip_information
*plvds_chip_info, struct IODATA io_data);
-int via_fb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+int via_fb_pci_probe(struct viafb_dev *vdev);
void via_fb_pci_remove(struct pci_dev *pdev);
/* Temporary */
int viafb_init(void);
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
+#include "via-core.h"
+#include "via_i2c.h"
#include "global.h"
u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
projects / deliverable / linux.git / commitdiff
