#define T_OPCODE_PUSH 0xb400
#define T_OPCODE_POP 0xbc00
-#define T_OPCODE_BRANCH 0xe7fe
+#define T_OPCODE_BRANCH 0xe000
#define THUMB_SIZE 2 /* Size of thumb instruction. */
#define THUMB_PP_PC_LR 0x0100
reloc_howto_type *howto = bfd_reloc_type_lookup (stdoutput, reloc);
int size = bfd_get_reloc_size (howto);
+ if (reloc == BFD_RELOC_ARM_PLT32)
+ {
+ as_bad (_("(plt) is only valid on branch targets"));
+ reloc = BFD_RELOC_UNUSED;
+ size = 0;
+ }
+
if (size > nbytes)
- as_bad ("%s relocations do not fit in %d bytes",
+ as_bad (_("%s relocations do not fit in %d bytes"),
howto->name, nbytes);
else
{
{
if (inst.reloc.type == BFD_RELOC_UNUSED)
inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM;
- if (inst.reloc.pc_rel)
- inst.reloc.exp.X_add_number -= 8; /* pipeline offset */
}
}
inst.instruction |= HWOFFSET_IMM;
if (inst.reloc.type == BFD_RELOC_UNUSED)
inst.reloc.type = BFD_RELOC_ARM_OFFSET_IMM8;
- if (inst.reloc.pc_rel)
- inst.reloc.exp.X_add_number -= 8; /* pipeline offset */
}
}
inst.reloc.type = reloc_override;
else
inst.reloc.type = BFD_RELOC_ARM_CP_OFF_IMM;
- if (inst.reloc.pc_rel)
- inst.reloc.exp.X_add_number -= 8;
return SUCCESS;
}
/* Frag hacking will turn this into a sub instruction if the offset turns
out to be negative. */
inst.reloc.type = BFD_RELOC_ARM_IMMEDIATE;
-#ifndef TE_WINCE
- inst.reloc.exp.X_add_number -= 8; /* PC relative adjust. */
-#endif
inst.reloc.pc_rel = 1;
+ inst.reloc.exp.X_add_number -= 8;
}
/* This is a pseudo-op of the form "adrl rd, label" to be converted
/* Frag hacking will turn this into a sub instruction if the offset turns
out to be negative. */
inst.reloc.type = BFD_RELOC_ARM_ADRL_IMMEDIATE;
-#ifndef TE_WINCE
- inst.reloc.exp.X_add_number -= 8; /* PC relative adjust */
-#endif
inst.reloc.pc_rel = 1;
inst.size = INSN_SIZE * 2;
+ inst.reloc.exp.X_add_number -= 8;
}
static void
constraint (inst.operands[0].imm != BFD_RELOC_ARM_PLT32,
_("the only suffix valid here is '(plt)'"));
inst.reloc.type = BFD_RELOC_ARM_PLT32;
- inst.reloc.pc_rel = 0;
}
else
{
inst.reloc.type = default_reloc;
- inst.reloc.pc_rel = 1;
}
+ inst.reloc.pc_rel = 1;
}
static void
/* Arg is an address; this instruction cannot be executed
conditionally, and the opcode must be adjusted. */
constraint (inst.cond != COND_ALWAYS, BAD_COND);
- inst.instruction = 0xfafffffe;
+ inst.instruction = 0xfa000000;
encode_branch (BFD_RELOC_ARM_PCREL_BLX);
}
}
else
{
/* No register. This must be BLX(1). */
- inst.instruction = 0xf7ffeffe;
+ inst.instruction = 0xf000e800;
inst.reloc.type = BFD_RELOC_THUMB_PCREL_BLX;
inst.reloc.pc_rel = 1;
}
{
if (inst.cond == COND_ALWAYS)
{
- inst.instruction = 0xf7ffbffe;
+ inst.instruction = 0xf000b000;
inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH25;
}
else
{
assert (inst.cond != 0xF);
- inst.instruction = (inst.cond << 22) | 0xf43faffe;
+ inst.instruction = (inst.cond << 22) | 0xf0008000;
inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH20;
}
}
inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH12;
else
{
- inst.instruction = 0xd0fe | (inst.cond << 8);
+ inst.instruction = 0xd000 | (inst.cond << 8);
inst.reloc.type = BFD_RELOC_THUMB_PCREL_BRANCH9;
}
}
tC3(ldmfd, 8900000, ldmia, 2, (RRw, REGLST), ldmstm, t_ldmstm),
TCE(swi, f000000, df00, 1, (EXPi), swi, t_swi),
-#ifdef TE_WINCE
- /* XXX This is the wrong place to do this. Think multi-arch. */
- TCE(b, a000000, e7fe, 1, (EXPr), branch, t_branch),
- TCE(bl, b000000, f7fffffe, 1, (EXPr), branch, t_branch23),
-#else
- TCE(b, afffffe, e7fe, 1, (EXPr), branch, t_branch),
- TCE(bl, bfffffe, f7fffffe, 1, (EXPr), branch, t_branch23),
-#endif
+ TCE(b, a000000, e000, 1, (EXPr), branch, t_branch),
+ TCE(bl, b000000, f000f800, 1, (EXPr), branch, t_branch23),
/* Pseudo ops. */
- TCE(adr, 28f0000, 000f, 2, (RR, EXP), adr, t_adr),
- C3(adrl, 28f0000, 2, (RR, EXP), adrl),
- tCE(nop, 1a00000, nop, 1, (oI255c), nop, t_nop),
+ TCE(adr, 28f0000, 000f, 2, (RR, EXP), adr, t_adr),
+ C3(adrl, 28f0000, 2, (RR, EXP), adrl),
+ tCE(nop, 1a00000, nop, 1, (oI255c), nop, t_nop),
/* Thumb-compatibility pseudo ops. */
tCE(lsl, 1a00000, lsl, 3, (RR, oRR, SH), shift, t_shift),
tCE(lsr, 1a00020, lsr, 3, (RR, oRR, SH), shift, t_shift),
tC3(lsrs, 1b00020, lsrs, 3, (RR, oRR, SH), shift, t_shift),
tCE(asr, 1a00040, asr, 3, (RR, oRR, SH), shift, t_shift),
- tC3(asrs, 1b00040, asrs, 3, (RR, oRR, SH), shift, t_shift),
+ tC3(asrs, 1b00040, asrs, 3, (RR, oRR, SH), shift, t_shift),
tCE(ror, 1a00060, ror, 3, (RR, oRR, SH), shift, t_shift),
tC3(rors, 1b00060, rors, 3, (RR, oRR, SH), shift, t_shift),
tCE(neg, 2600000, neg, 2, (RR, RR), rd_rn, t_neg),
#undef THUMB_VARIANT
#define THUMB_VARIANT ARM_EXT_V6
- TCE(cpy, 1a00000, 4600, 2, (RR, RR), rd_rm, t_cpy),
+ TCE(cpy, 1a00000, 4600, 2, (RR, RR), rd_rm, t_cpy),
/* V1 instructions with no Thumb analogue prior to V6T2. */
#undef THUMB_VARIANT
TC3(strbt, 4600000, f8200e00, 2, (RR, ADDR), ldstt, t_ldstt),
TC3(stmdb, 9000000, e9100000, 2, (RRw, REGLST), ldmstm, t_ldmstm),
- TC3(stmfd, 9000000, e9100000, 2, (RRw, REGLST), ldmstm, t_ldmstm),
+ TC3(stmfd, 9000000, e9100000, 2, (RRw, REGLST), ldmstm, t_ldmstm),
TC3(ldmdb, 9100000, e9000000, 2, (RRw, REGLST), ldmstm, t_ldmstm),
TC3(ldmea, 9100000, e9000000, 2, (RRw, REGLST), ldmstm, t_ldmstm),
/* MD interface: Symbol and relocation handling. */
-/* The knowledge of the PC's pipeline offset is built into the insns
- themselves. */
+/* Return the address within the segment that a PC-relative fixup is
+ relative to. For ARM, PC-relative fixups applied to instructions
+ are generally relative to the location of the fixup plus 8 bytes.
+ Thumb branches are offset by 4, and Thumb loads relative to PC
+ require special handling. */
long
-md_pcrel_from (fixS * fixP)
+md_pcrel_from_section (fixS * fixP, segT seg)
{
- if (fixP->fx_addsy
- && S_GET_SEGMENT (fixP->fx_addsy) == undefined_section
- && fixP->fx_subsy == NULL)
- return 0;
+ offsetT base = fixP->fx_where + fixP->fx_frag->fr_address;
+
+ /* If this is pc-relative and we are going to emit a relocation
+ then we just want to put out any pipeline compensation that the linker
+ will need. Otherwise we want to use the calculated base. */
+ if (fixP->fx_pcrel
+ && ((fixP->fx_addsy && S_GET_SEGMENT (fixP->fx_addsy) != seg)
+ || arm_force_relocation (fixP)))
+ base = 0;
- /* PC relative addressing on the Thumb is slightly odd as the bottom
- two bits of the PC are forced to zero for the calculation. This
- happens *after* application of the pipeline offset. However,
- Thumb adrl already adjusts for this, so we need not do it again. */
switch (fixP->fx_r_type)
{
+ /* PC relative addressing on the Thumb is slightly odd as the
+ bottom two bits of the PC are forced to zero for the
+ calculation. This happens *after* application of the
+ pipeline offset. However, Thumb adrl already adjusts for
+ this, so we need not do it again. */
case BFD_RELOC_ARM_THUMB_ADD:
- return (fixP->fx_where + fixP->fx_frag->fr_address) & ~3;
+ return base & ~3;
case BFD_RELOC_ARM_THUMB_OFFSET:
case BFD_RELOC_ARM_T32_OFFSET_IMM:
- return (fixP->fx_where + fixP->fx_frag->fr_address + 4) & ~3;
+ return (base + 4) & ~3;
- default:
- break;
- }
+ /* Thumb branches are simply offset by +4. */
+ case BFD_RELOC_THUMB_PCREL_BRANCH7:
+ case BFD_RELOC_THUMB_PCREL_BRANCH9:
+ case BFD_RELOC_THUMB_PCREL_BRANCH12:
+ case BFD_RELOC_THUMB_PCREL_BRANCH20:
+ case BFD_RELOC_THUMB_PCREL_BRANCH23:
+ case BFD_RELOC_THUMB_PCREL_BRANCH25:
+ case BFD_RELOC_THUMB_PCREL_BLX:
+ return base + 4;
+ /* ARM mode branches are offset by +8. However, the Windows CE
+ loader expects the relocation not to take this into account. */
+ case BFD_RELOC_ARM_PCREL_BRANCH:
+ case BFD_RELOC_ARM_PCREL_BLX:
+ case BFD_RELOC_ARM_PLT32:
#ifdef TE_WINCE
- /* The pattern was adjusted to accommodate CE's off-by-one fixups,
- so we un-adjust here to compensate for the accommodation. */
- return fixP->fx_where + fixP->fx_frag->fr_address + 8;
+ return base;
#else
- return fixP->fx_where + fixP->fx_frag->fr_address;
+ return base + 8;
#endif
+
+ /* ARM mode loads relative to PC are also offset by +8. Unlike
+ branches, the Windows CE loader *does* expect the relocation
+ to take this into account. */
+ case BFD_RELOC_ARM_OFFSET_IMM:
+ case BFD_RELOC_ARM_OFFSET_IMM8:
+ case BFD_RELOC_ARM_HWLITERAL:
+ case BFD_RELOC_ARM_LITERAL:
+ case BFD_RELOC_ARM_CP_OFF_IMM:
+ return base + 8;
+
+
+ /* Other PC-relative relocations are un-offset. */
+ default:
+ return base;
+ }
}
/* Under ELF we need to default _GLOBAL_OFFSET_TABLE.
if (fixP->fx_addsy == 0 && !fixP->fx_pcrel)
fixP->fx_done = 1;
- /* If this symbol is in a different section then we need to leave it for
- the linker to deal with. Unfortunately, md_pcrel_from can't tell,
- so we have to undo its effects here. */
- if (fixP->fx_pcrel)
- {
- if (fixP->fx_addsy != NULL
- && S_IS_DEFINED (fixP->fx_addsy)
- && S_GET_SEGMENT (fixP->fx_addsy) != seg)
- value += md_pcrel_from (fixP);
- }
-
/* On a 64-bit host, silently truncate 'value' to 32 bits for
consistency with the behavior on 32-bit hosts. Remember value
for emit_reloc. */
value /= 4;
newval = md_chars_to_number (buf+2, THUMB_SIZE);
- newval &= 0xff00;
newval |= value;
md_number_to_chars (buf+2, newval, THUMB_SIZE);
break;
break;
}
- newval &= 0xfbff8f00;
newval |= (newimm & 0x800) << 15;
newval |= (newimm & 0x700) << 4;
newval |= (newimm & 0x0ff);
if (((unsigned long) value) > 0xffff)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("invalid smi expression"));
- newval = md_chars_to_number (buf, INSN_SIZE) & 0xfff000f0;
+ newval = md_chars_to_number (buf, INSN_SIZE);
newval |= (value & 0xf) | ((value & 0xfff0) << 4);
md_number_to_chars (buf, newval, INSN_SIZE);
break;
if (((unsigned long) value) > 0xff)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("invalid swi expression"));
- newval = md_chars_to_number (buf, THUMB_SIZE) & 0xff00;
+ newval = md_chars_to_number (buf, THUMB_SIZE);
newval |= value;
md_number_to_chars (buf, newval, THUMB_SIZE);
}
if (((unsigned long) value) > 0x00ffffff)
as_bad_where (fixP->fx_file, fixP->fx_line,
_("invalid swi expression"));
- newval = md_chars_to_number (buf, INSN_SIZE) & 0xff000000;
+ newval = md_chars_to_number (buf, INSN_SIZE);
newval |= value;
md_number_to_chars (buf, newval, INSN_SIZE);
}
break;
case BFD_RELOC_ARM_PCREL_BRANCH:
- newval = md_chars_to_number (buf, INSN_SIZE);
-
- /* Sign-extend a 24-bit number. */
-#define SEXT24(x) ((((x) & 0xffffff) ^ (~ 0x7fffff)) + 0x800000)
-
#ifdef OBJ_ELF
- if (!fixP->fx_done)
- value = fixP->fx_offset;
+ case BFD_RELOC_ARM_PLT32:
#endif
/* We are going to store value (shifted right by two) in the
- instruction, in a 24 bit, signed field Thus we need to check
- that none of the top 8 bits of the shifted value (top 7 bits of
- the unshifted, unsigned value) are set, or that they are all set. */
- if ((value & ~ ((offsetT) 0x1ffffff)) != 0
- && ((value & ~ ((offsetT) 0x1ffffff)) != ~ ((offsetT) 0x1ffffff)))
- {
-#ifdef OBJ_ELF
- /* Normally we would be stuck at this point, since we cannot store
- the absolute address that is the destination of the branch in the
- 24 bits of the branch instruction. If however, we happen to know
- that the destination of the branch is in the same section as the
- branch instruction itself, then we can compute the relocation for
- ourselves and not have to bother the linker with it.
-
- FIXME: The test for OBJ_ELF is only here because I have not
- worked out how to do this for OBJ_COFF. */
- if (fixP->fx_addsy != NULL
- && S_IS_DEFINED (fixP->fx_addsy)
- && S_GET_SEGMENT (fixP->fx_addsy) == seg)
- {
- /* Get pc relative value to go into the branch. */
- value = * valP;
-
- /* Permit a backward branch provided that enough bits
- are set. Allow a forwards branch, provided that
- enough bits are clear. */
- if ( (value & ~ ((offsetT) 0x1ffffff)) == ~ ((offsetT) 0x1ffffff)
- || (value & ~ ((offsetT) 0x1ffffff)) == 0)
- fixP->fx_done = 1;
- }
-
- if (! fixP->fx_done)
-#endif
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("GAS can't handle same-section branch dest >= 0x04000000"));
- }
-
- value >>= 2;
- value += SEXT24 (newval);
-
- if ( (value & ~ ((offsetT) 0xffffff)) != 0
- && ((value & ~ ((offsetT) 0xffffff)) != ~ ((offsetT) 0xffffff)))
+ instruction, in a 24 bit, signed field. Bits 0 and 1 must be
+ clear, and bits 26 through 32 either all clear or all set. */
+ if (value & 0x00000003)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("misaligned branch destination"));
+ if ((value & (offsetT)0xfe000000) != (offsetT)0
+ && (value & (offsetT)0xfe000000) != (offsetT)0xfe000000)
as_bad_where (fixP->fx_file, fixP->fx_line,
- _("out of range branch"));
+ _("branch out of range"));
- if (seg->use_rela_p && !fixP->fx_done)
+ if (fixP->fx_done || !seg->use_rela_p)
{
- /* Must unshift the value before storing it in the addend. */
- value <<= 2;
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- newval = newval & 0xff000000;
+ newval = md_chars_to_number (buf, INSN_SIZE);
+ newval |= (value >> 2) & 0x00ffffff;
+ md_number_to_chars (buf, newval, INSN_SIZE);
}
- else
- newval = (value & 0x00ffffff) | (newval & 0xff000000);
- md_number_to_chars (buf, newval, INSN_SIZE);
break;
case BFD_RELOC_ARM_PCREL_BLX:
- {
- offsetT hbit;
- newval = md_chars_to_number (buf, INSN_SIZE);
+ /* BLX allows bit 1 to be set in the branch destination, since
+ it targets a Thumb instruction which is only required to be
+ aligned modulo 2. Other constraints are as for B/BL. */
+ if (value & 0x00000001)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("misaligned BLX destination"));
+ if ((value & (offsetT)0xfe000000) != (offsetT)0
+ && (value & (offsetT)0xfe000000) != (offsetT)0xfe000000)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch out of range"));
-#ifdef OBJ_ELF
- if (!fixP->fx_done)
- value = fixP->fx_offset;
-#endif
- hbit = (value >> 1) & 1;
- value = (value >> 2) & 0x00ffffff;
- value = (value + (newval & 0x00ffffff)) & 0x00ffffff;
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ offsetT hbit;
+ hbit = (value >> 1) & 1;
+ value = (value >> 2) & 0x00ffffff;
- if (seg->use_rela_p && !fixP->fx_done)
- {
- /* Must sign-extend and unshift the value before storing
- it in the addend. */
- value = SEXT24 (value);
- value = (value << 2) | hbit;
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- newval = newval & 0xfe000000;
- }
- else
- newval = value | (newval & 0xfe000000) | (hbit << 24);
- md_number_to_chars (buf, newval, INSN_SIZE);
- }
+ newval = md_chars_to_number (buf, INSN_SIZE);
+ newval |= value | hbit << 24;
+ md_number_to_chars (buf, newval, INSN_SIZE);
+ }
break;
case BFD_RELOC_THUMB_PCREL_BRANCH7: /* CZB */
- newval = md_chars_to_number (buf, THUMB_SIZE);
- {
- addressT diff = ((newval & 0x00f8) >> 2) | (newval & 0x0200) >> 3;
- /* This one does not have the offset encoded in the pattern. */
- value = value + diff - 4;
- /* CZB can only branch forward. */
- if (value & ~0x7e)
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch out of range"));
+ /* CZB can only branch forward. */
+ if (value & ~0x7e)
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch out of range"));
- newval &= 0xfd07;
- if (seg->use_rela_p && !fixP->fx_done)
- {
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- }
- else
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ newval = md_chars_to_number (buf, THUMB_SIZE);
newval |= ((value & 0x2e) << 2) | ((value & 0x40) << 3);
- }
- md_number_to_chars (buf, newval, THUMB_SIZE);
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ }
break;
case BFD_RELOC_THUMB_PCREL_BRANCH9: /* Conditional branch. */
- newval = md_chars_to_number (buf, THUMB_SIZE);
- {
- addressT diff = (newval & 0xff) << 1;
- if (diff & 0x100)
- diff |= ~0xff;
+ if ((value & ~0xff) && ((value & ~0xff) != ~0xff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch out of range"));
- value += diff;
- if ((value & ~0xff) && ((value & ~0xff) != ~0xff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch out of range"));
- if (seg->use_rela_p && !fixP->fx_done)
- {
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- newval = newval & 0xff00;
- }
- else
- newval = (newval & 0xff00) | ((value & 0x1ff) >> 1);
- }
- md_number_to_chars (buf, newval, THUMB_SIZE);
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ newval = md_chars_to_number (buf, THUMB_SIZE);
+ newval |= (value & 0x1ff) >> 1;
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ }
break;
case BFD_RELOC_THUMB_PCREL_BRANCH12: /* Unconditional branch. */
- newval = md_chars_to_number (buf, THUMB_SIZE);
- {
- addressT diff = (newval & 0x7ff) << 1;
- if (diff & 0x800)
- diff |= ~0x7ff;
+ if ((value & ~0x7ff) && ((value & ~0x7ff) != ~0x7ff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch out of range"));
- value += diff;
- if ((value & ~0x7ff) && ((value & ~0x7ff) != ~0x7ff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch out of range"));
- if (seg->use_rela_p && !fixP->fx_done)
- {
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- newval = newval & 0xf800;
- }
- else
- newval = (newval & 0xf800) | ((value & 0xfff) >> 1);
- }
- md_number_to_chars (buf, newval, THUMB_SIZE);
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ newval = md_chars_to_number (buf, THUMB_SIZE);
+ newval |= (value & 0xfff) >> 1;
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ }
break;
case BFD_RELOC_THUMB_PCREL_BRANCH20:
- {
- offsetT newval2;
- addressT diff, S, J1, J2, lo, hi;
-
- newval = md_chars_to_number (buf, THUMB_SIZE);
- newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
-
- S = !(newval & 0x0400); /* flipped - 0=negative */
- hi = (newval & 0x003f);
- J1 = (newval2 & 0x2000) >> 13;
- J2 = (newval2 & 0x0800) >> 11;
- lo = (newval2 & 0x07ff);
-
- diff = ((S << 20) | (J2 << 19) | (J1 << 18) | (hi << 12) | (lo << 1));
- diff -= (1 << 20); /* sign extend */
- value += diff;
+ if ((value & ~0x1fffff) && ((value & ~0x1fffff) != ~0x1fffff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("conditional branch out of range"));
- if ((value & ~0x1fffff) && ((value & ~0x1fffff) != ~0x1fffff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("conditional branch out of range"));
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ offsetT newval2;
+ addressT S, J1, J2, lo, hi;
- newval = newval & 0xfbc0;
- newval2 = newval2 & 0xd000;
- if (seg->use_rela_p && !fixP->fx_done)
- {
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- }
- else
- {
- S = (value & 0x00100000) >> 20;
- J2 = (value & 0x00080000) >> 19;
- J1 = (value & 0x00040000) >> 18;
- hi = (value & 0x0003f000) >> 12;
- lo = (value & 0x00000ffe) >> 1;
-
- newval = newval | (S << 10) | hi;
- newval2 = newval2 | (J1 << 13) | (J2 << 11) | lo;
- }
+ S = (value & 0x00100000) >> 20;
+ J2 = (value & 0x00080000) >> 19;
+ J1 = (value & 0x00040000) >> 18;
+ hi = (value & 0x0003f000) >> 12;
+ lo = (value & 0x00000ffe) >> 1;
- md_number_to_chars (buf, newval, THUMB_SIZE);
- md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
- }
+ newval = md_chars_to_number (buf, THUMB_SIZE);
+ newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
+ newval |= (S << 10) | hi;
+ newval2 |= (J1 << 13) | (J2 << 11) | lo;
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
+ }
break;
case BFD_RELOC_THUMB_PCREL_BLX:
case BFD_RELOC_THUMB_PCREL_BRANCH23:
- {
- offsetT newval2;
- addressT diff;
-
- newval = md_chars_to_number (buf, THUMB_SIZE);
- newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
- diff = ((newval & 0x7ff) << 12) | ((newval2 & 0x7ff) << 1);
- if (diff & 0x400000)
- diff |= ~0x3fffff;
-#ifdef OBJ_ELF
- if (!fixP->fx_done)
- value = fixP->fx_offset;
-#endif
- value += diff;
-
- if ((value & ~0x3fffff) && ((value & ~0x3fffff) != ~0x3fffff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch with link out of range"));
-
- if (fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BLX)
- /* For a BLX instruction, make sure that the relocation is rounded up
- to a word boundary. This follows the semantics of the instruction
- which specifies that bit 1 of the target address will come from bit
- 1 of the base address. */
- value = (value + 1) & ~ 1;
+ if ((value & ~0x3fffff) && ((value & ~0x3fffff) != ~0x3fffff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch out of range"));
- if (seg->use_rela_p && !fixP->fx_done)
- {
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- newval = newval & 0xf800;
- newval2 = newval2 & 0xf800;
- }
- else
- {
- newval = (newval & 0xf800) | ((value & 0x7fffff) >> 12);
- newval2 = (newval2 & 0xf800) | ((value & 0xfff) >> 1);
- }
- md_number_to_chars (buf, newval, THUMB_SIZE);
- md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
- }
- break;
+ if (fixP->fx_r_type == BFD_RELOC_THUMB_PCREL_BLX)
+ /* For a BLX instruction, make sure that the relocation is rounded up
+ to a word boundary. This follows the semantics of the instruction
+ which specifies that bit 1 of the target address will come from bit
+ 1 of the base address. */
+ value = (value + 1) & ~ 1;
- case BFD_RELOC_8:
- if (seg->use_rela_p && !fixP->fx_done)
- break;
- if (fixP->fx_done || fixP->fx_pcrel)
- md_number_to_chars (buf, value, 1);
-#ifdef OBJ_ELF
- else
+ if (fixP->fx_done || !seg->use_rela_p)
{
- value = fixP->fx_offset;
- md_number_to_chars (buf, value, 1);
+ offsetT newval2;
+
+ newval = md_chars_to_number (buf, THUMB_SIZE);
+ newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
+ newval |= (value & 0x7fffff) >> 12;
+ newval2 |= (value & 0xfff) >> 1;
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
}
-#endif
break;
case BFD_RELOC_THUMB_PCREL_BRANCH25:
- {
- offsetT newval2;
- addressT diff, S, I1, I2, lo, hi;
-
- newval = md_chars_to_number (buf, THUMB_SIZE);
- newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
-
- S = (newval & 0x0400) >> 10;
- hi = (newval & 0x03ff);
- I1 = (newval2 & 0x2000) >> 13;
- I2 = (newval2 & 0x0800) >> 11;
- lo = (newval2 & 0x07ff);
-
- I1 = !(I1 ^ S);
- I2 = !(I2 ^ S);
- S = !S;
+ if ((value & ~0x1ffffff) && ((value & ~0x1ffffff) != ~0x1ffffff))
+ as_bad_where (fixP->fx_file, fixP->fx_line,
+ _("branch out of range"));
- diff = ((S << 24) | (I1 << 23) | (I2 << 22) | (hi << 12) | (lo << 1));
- diff -= (1 << 24); /* sign extend */
- value += diff;
+ if (fixP->fx_done || !seg->use_rela_p)
+ {
+ offsetT newval2;
+ addressT S, I1, I2, lo, hi;
- if ((value & ~0x1ffffff) && ((value & ~0x1ffffff) != ~0x1ffffff))
- as_bad_where (fixP->fx_file, fixP->fx_line,
- _("branch out of range"));
+ S = (value & 0x01000000) >> 24;
+ I1 = (value & 0x00800000) >> 23;
+ I2 = (value & 0x00400000) >> 22;
+ hi = (value & 0x003ff000) >> 12;
+ lo = (value & 0x00000ffe) >> 1;
- newval = newval & 0xf800;
- newval2 = newval2 & 0xd000;
- if (seg->use_rela_p && !fixP->fx_done)
- {
-#ifdef OBJ_ELF
- fixP->fx_offset = value;
-#endif
- fixP->fx_addnumber = value;
- }
- else
- {
- S = (value & 0x01000000) >> 24;
- I1 = (value & 0x00800000) >> 23;
- I2 = (value & 0x00400000) >> 22;
- hi = (value & 0x003ff000) >> 12;
- lo = (value & 0x00000ffe) >> 1;
+ I1 = !(I1 ^ S);
+ I2 = !(I2 ^ S);
- I1 = !(I1 ^ S);
- I2 = !(I2 ^ S);
+ newval = md_chars_to_number (buf, THUMB_SIZE);
+ newval2 = md_chars_to_number (buf + THUMB_SIZE, THUMB_SIZE);
+ newval |= (S << 10) | hi;
+ newval2 |= (I1 << 13) | (I2 << 11) | lo;
+ md_number_to_chars (buf, newval, THUMB_SIZE);
+ md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
+ }
+ break;
- newval = newval | (S << 10) | hi;
- newval2 = newval2 | (I1 << 13) | (I2 << 11) | lo;
- }
- md_number_to_chars (buf, newval, THUMB_SIZE);
- md_number_to_chars (buf + THUMB_SIZE, newval2, THUMB_SIZE);
- }
+ case BFD_RELOC_8:
+ if (fixP->fx_done || !seg->use_rela_p)
+ md_number_to_chars (buf, value, 1);
break;
case BFD_RELOC_16:
- if (seg->use_rela_p && !fixP->fx_done)
- break;
- if (fixP->fx_done || fixP->fx_pcrel)
+ if (fixP->fx_done || !seg->use_rela_p)
md_number_to_chars (buf, value, 2);
-#ifdef OBJ_ELF
- else
- {
- value = fixP->fx_offset;
- md_number_to_chars (buf, value, 2);
- }
-#endif
break;
#ifdef OBJ_ELF
case BFD_RELOC_ARM_GOT32:
case BFD_RELOC_ARM_GOTOFF:
case BFD_RELOC_ARM_TARGET2:
- if (seg->use_rela_p && !fixP->fx_done)
- break;
- md_number_to_chars (buf, 0, 4);
+ if (fixP->fx_done || !seg->use_rela_p)
+ md_number_to_chars (buf, 0, 4);
break;
#endif
case BFD_RELOC_ARM_ROSEGREL32:
case BFD_RELOC_ARM_SBREL32:
case BFD_RELOC_32_PCREL:
- if (seg->use_rela_p && !fixP->fx_done)
- break;
- if (fixP->fx_done || fixP->fx_pcrel)
+ if (fixP->fx_done || !seg->use_rela_p)
md_number_to_chars (buf, value, 4);
-#ifdef OBJ_ELF
- else
- {
- value = fixP->fx_offset;
- md_number_to_chars (buf, value, 4);
- }
-#endif
break;
#ifdef OBJ_ELF
case BFD_RELOC_ARM_PREL31:
- if (fixP->fx_done || fixP->fx_pcrel)
+ if (fixP->fx_done || !seg->use_rela_p)
{
newval = md_chars_to_number (buf, 4) & 0x80000000;
if ((value ^ (value >> 1)) & 0x40000000)
md_number_to_chars (buf, newval, 4);
}
break;
-
- case BFD_RELOC_ARM_PLT32:
- /* It appears the instruction is fully prepared at this point. */
- break;
#endif
case BFD_RELOC_ARM_CP_OFF_IMM:
*reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
- /* @@ Why fx_addnumber sometimes and fx_offset other times? */
-#ifndef OBJ_ELF
- if (fixp->fx_pcrel == 0)
- reloc->addend = fixp->fx_offset;
- else
- reloc->addend = fixp->fx_offset = reloc->address;
-#else /* OBJ_ELF */
+ if (fixp->fx_pcrel)
+ fixp->fx_offset = reloc->address;
reloc->addend = fixp->fx_offset;
-#endif
switch (fixp->fx_r_type)
{
projects / deliverable / binutils-gdb.git / commitdiff
