--- /dev/null
+# Copyright (C) 1993 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Ian Lance Taylor <ian@cygnus.com>.
+
+# GDB support routines for a board using the MIPS remote debugging
+# protocol. These are actually pretty generic.
+
+# DejaGnu currently assumes that debugging is being done over the main
+# console port. It would probably be more convenient for people using
+# IDT boards to permit the debugging port and the connected port to be
+# different, since an IDT board has two ports. This would require
+# extending some of the tests in a fashion similar to that done for
+# VxWorks, because the test output would appear on the other port,
+# rather than being displayed by gdb.
+
+load_lib remote.exp
+load_lib gdb.exp
+
+#
+# gdb_version -- extract and print the version number of gdb
+#
+proc gdb_version {} {
+ global GDB
+ global GDBFLAGS
+ global prompt
+ set tmp [exec echo "q" | $GDB]
+ set version [lindex $tmp [lsearch $tmp "\[0-9\]*"]]
+ set version [string range $version 0 [expr [string length $version]-2]]
+ clone_output "[which $GDB] version $version $GDBFLAGS\n"
+}
+
+#
+# gdb_load -- load a file into the GDB.
+# Returns a 0 if there was an error,
+# 1 if it load successfully.
+#
+proc gdb_load { arg } {
+ global verbose
+ global loadpath
+ global loadfile
+ global prompt
+ global spawn_id
+ global GDB
+ global expect_out
+ global targetname
+
+ set loadfile [file tail $arg]
+ set loadpath [file dirname $arg]
+
+ send "file $arg\n"
+ expect {
+ -re "A program is being debugged already..*Kill it.*y or n. $" {
+ send "y\n"
+ exp_continue
+ }
+ -re "Reading symbols from.*done..*$prompt $" {}
+ -re "$prompt $" { perror "GDB couldn't read file" }
+ timeout { perror "(timeout) read symbol file" ; return -1 }
+ }
+
+ send "target sparclite $targetname\n"
+ set timeout 60
+ expect {
+ -re ".*SPARClite appears to be alive.*$prompt $" {
+ if $verbose>1 then {
+ send_user "Set target to $targetname\n"
+ }
+ }
+ timeout {
+ perror "Couldn't set SLITE target."
+ set timeout 10
+ return -1
+ }
+ }
+
+ send "load $arg\n"
+ if $verbose>1 then {
+ send_user "Loading $arg into $GDB\n"
+ }
+ set timeout 2400
+ expect {
+ -re "Loading.*$prompt $" {
+ if $verbose>1 then {
+ send_user "Loaded $arg into $GDB\n"
+ }
+ set timeout 30
+ }
+ -re "$prompt $" {
+ if $verbose>1 then {
+ perror "GDB couldn't load."
+ }
+ }
+ timeout {
+ if $verbose>1 then {
+ perror "Timed out trying to load $arg."
+ }
+ }
+ }
+ set timeout 10
+
+ send "target remote $targetname\n"
+ set timeout 60
+ expect {
+ -re ".*$prompt $" {
+ if $verbose>1 then {
+ send_user "Set remote target to $targetname\n"
+ }
+ }
+ timeout {
+ perror "Couldn't set remote target."
+ set timeout 10
+ return -1
+ }
+ }
+
+ if [info exists expect_out(buffer)] then {
+ send_log $expect_out(buffer)
+ }
+ return 0
+}
+
+#
+# gdb_start -- start GDB running.
+#
+proc gdb_start { } {
+ global GDB
+ global GDBFLAGS
+ global spawn_id
+ global shell_id
+ global prompt
+ global verbose
+ global targetname
+ global connectmode
+ global reboot
+ global baud
+
+ # reboot the board to get a clean start
+ if $reboot then {
+ if ![info exists connectmode] then {
+ set connectmode "kermit"
+ }
+ if ![info exists baud] then {
+ set baud 9600
+ }
+ set shell_id [ eval $connectmode "$targetname" ]
+ send -i $shell_id "\n"
+ expect {
+ -i $shell_id -re ">$" { }
+ timeout {
+ send -i $shell_id "\CC"
+ expect {
+ -i $shell_id -re ">$" { }
+ timeout {
+ perror "(timeout) board did not come up."; return -1
+ }
+ }
+ }
+ }
+ send -i $shell_id "go 0xbfc00000\n"
+ expect {
+ -i $shell_id -re ">$" { }
+ timeout { perror "(timeout) board did not come up."; return -1 }
+ }
+ verbose "about to exit kermit"
+ exit_remote_shell $shell_id
+ }
+
+ set GDB [which $GDB]
+ # start GDB
+ if [ llength $GDBFLAGS ] then {
+ spawn $GDB $GDBFLAGS
+ } else {
+ spawn $GDB
+ }
+ expect {
+ -re ".*\r\n$prompt $" {
+ verbose "GDB initialized."
+ }
+ -re "$prompt $" {
+ perror "GDB never initialized."
+ return -1
+ }
+ timeout {
+ perror "(timeout) GDB never initialized."
+ return -1
+ }
+ }
+
+ # force the height to "unlimited", so no pagers get used
+ send "set height 0\n"
+ expect -re ".*$prompt $" {}
+ # force the width to "unlimited", so no wraparound occurs
+ send "set width 0\n"
+ expect -re ".*$prompt $" {}
+
+ # Don't use floating point instructions, in case the board doesn't
+ # support them.
+ # send "set mipsfpu off\n"
+ # expect -re ".*$prompt $" {}
+
+# if $verbose>1 then {
+# send_user "Setting up target, please wait...\n"
+# }
+# send "target mips $targetname\n"
+# set timeout 60
+# expect {
+# -re "Remote MIPS debugging.*$prompt $" {
+# if $verbose>1 then {
+# send_user "Set target to $targetname\n"
+# }
+# }
+# timeout {
+# perror "Couldn't set MIPS target."
+# set timeout 10
+# return -1
+# }
+# }
+ set timeout 10
+}
+
+expect_after {
+ "<return>" { send "\n"; perror "Window too small." }
+ -re "\(y or n\) " { send "n\n"; perror "Got interactive prompt." }
+ buffer_full { perror "internal buffer is full." }
+ eof { perror "eof -- pty is hosed." }
+ timeout { perror "timeout." }
+ "virtual memory exhausted" { perror "virtual memory exhausted." }
+ "Undefined command" { perror "send string probably wrong." }
+}
+
+proc gdb_exit { } {
+ catch default_gdb_exit
+}
+
+gdb_start
+
+# make sure gdb has actually started, otherwise if the first test
+# timesout, DejaGnu crashes
+send "\n"
+expect {
+ -re "$prompt"
+ }
projects / deliverable / binutils-gdb.git / commitdiff
