- DRA722 EVM: Software Development Board for DRA722
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
+
+- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-boot-on;
};
- wl12xx_vmmc: fixedregulator@2 {
+ wl12xx_vmmc: fixedregulator2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "base:red:user";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
default-state = "off";
};
- led@1 {
+ led1 {
label = "base:green:user";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
default-state = "off";
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
compatible = "gpio-leds";
- led@2 {
+ led2 {
label = "beaglebone:green:heartbeat";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
- led@3 {
+ led3 {
label = "beaglebone:green:mmc0";
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@4 {
+ led4 {
label = "beaglebone:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@5 {
+ led5 {
label = "beaglebone:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
};
};
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
model = "CompuLab CM-T335";
compatible = "compulab,cm-t335", "ti,am33xx";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&gpio_led_pins>;
- led@0 {
+ led0 {
label = "cm_t335:green";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
linux,default-trigger = "heartbeat";
};
/* regulator for mmc */
- vmmc_fixed: fixedregulator@0 {
+ vmmc_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmc_fixed";
regulator-min-microvolt = <3300000>;
};
/* Regulator for WiFi */
- vwlan_fixed: fixedregulator@2 {
+ vwlan_fixed: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "vwlan_fixed";
gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-boot-on;
};
- lis3_reg: fixedregulator@1 {
+ lis3_reg: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "lis3_reg";
regulator-boot-on;
};
- wlan_en_reg: fixedregulator@2 {
+ wlan_en_reg: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
enable-active-high;
};
- matrix_keypad: matrix_keypad@0 {
+ matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
0x0201006c>; /* DOWN */
};
- gpio_keys: volume_keys@0 {
+ gpio_keys: volume_keys0 {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
- switch@9 {
+ switch9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch@10 {
+ switch10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-boot-on;
};
- lis3_reg: fixedregulator@1 {
+ lis3_reg: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "lis3_reg";
regulator-boot-on;
};
- wl12xx_vmmc: fixedregulator@2 {
+ wl12xx_vmmc: fixedregulator2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
enable-active-high;
};
- vtt_fixed: fixedregulator@3 {
+ vtt_fixed: fixedregulator3 {
compatible = "regulator-fixed";
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
compatible = "gpio-leds";
- led@1 {
+ led1 {
label = "evmsk:green:usr0";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "evmsk:green:usr1";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@3 {
+ led3 {
label = "evmsk:green:mmc0";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@4 {
+ led4 {
label = "evmsk:green:heartbeat";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
- gpio_buttons: gpio_buttons@0 {
+ gpio_buttons: gpio_buttons0 {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- switch@1 {
+ switch1 {
label = "button0";
linux,code = <0x100>;
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
};
- switch@2 {
+ switch2 {
label = "button1";
linux,code = <0x101>;
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
- switch@3 {
+ switch3 {
label = "button2";
linux,code = <0x102>;
gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- switch@4 {
+ switch4 {
label = "button3";
linux,code = <0x103>;
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
model = "TI AM3359 ICE-V2";
compatible = "ti,am3359-icev2", "ti,am33xx";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-boot-on;
};
- vtt_fixed: fixedregulator@1 {
+ vtt_fixed: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
enable-active-high;
};
- leds@0 {
+ leds0 {
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "out0";
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@1 {
+ led1 {
label = "out1";
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "out2";
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@3 {
+ led3 {
label = "out3";
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@4 {
+ led4 {
label = "out4";
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@5 {
+ led5 {
label = "out5";
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@6 {
+ led6 {
label = "out6";
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@7 {
+ led7 {
label = "out7";
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
/* Tricolor status LEDs */
- leds@1 {
+ leds1 {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_leds>;
- led@0 {
+ led0 {
label = "status0:red:cpu0";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
- led@1 {
+ led1 {
label = "status0:green:usr";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "status0:yellow:usr";
gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@3 {
+ led3 {
label = "status1:red:mmc0";
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
- led@4 {
+ led4 {
label = "status1:green:usr";
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@5 {
+ led5 {
label = "status1:yellow:usr";
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
+ gpio-decoder {
+ compatible = "gpio-decoder";
+ gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+ <&pca9536 2 GPIO_ACTIVE_HIGH>,
+ <&pca9536 1 GPIO_ACTIVE_HIGH>,
+ <&pca9536 0 GPIO_ACTIVE_HIGH>;
+ linux,axis = <0>; /* ABS_X */
+ decoder-max-value = <9>;
+ };
};
&am33xx_pinmux {
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "com:green:user";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-boot-on;
};
- vmmc: fixedregulator@0 {
+ vmmc: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
/* Power supply provides a fixed 5V @2A */
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
};
/* Power supply provides a fixed 3.3V @3A */
- vmmcsd_fixed: fixedregulator@1 {
+ vmmcsd_fixed: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
leds {
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "nanobone:green:usr1";
gpios = <&gpio1 5 0>;
default-state = "off";
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
compatible = "ti,da830-evm-audio";
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
};
- v3v3c_reg: fixedregulator@1 {
+ v3v3c_reg: fixedregulator1 {
compatible = "regulator-fixed";
};
- vdd5_reg: fixedregulator@2 {
+ vdd5_reg: fixedregulator2 {
compatible = "regulator-fixed";
};
};
pinctrl-names = "default";
pinctrl-0 = <&user_leds_pins>;
- led@0 {
+ led0 {
label = "pepper:user0:blue";
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "off";
};
- led@1 {
+ led1 {
label = "pepper:user1:red";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
#address-cells = <1>;
#size-cells = <0>;
- button@0 {
+ button0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- button@1 {
+ button1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- buttons@2 {
+ buttons2 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
regulators {
compatible = "simple-bus";
- vcc5v: fixedregulator@0 {
+ vcc5v: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;
compatible = "gpio-leds";
- led@1 {
+ led1 {
label = "shc:power:red";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "shc:power:bl";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
default-state = "on";
};
- led@3 {
+ led3 {
label = "shc:lan:red";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@4 {
+ led4 {
label = "shc:lan:bl";
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@5 {
+ led5 {
label = "shc:cloud:red";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@6 {
+ led6 {
label = "shc:cloud:bl";
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
};
};
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
chosen {
stdout-path = &uart0;
};
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- led@0 {
+ led0 {
label = "sl50:green:usr0";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@1 {
+ led1 {
label = "sl50:red:usr1";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "sl50:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@3 {
+ led3 {
label = "sl50:red:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "off";
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
};
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
model = "Phytec AM335x phyBOARD-WEGA";
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+ sound: sound_iface {
+ compatible = "ti,da830-evm-audio";
+ };
+
regulators {
compatible = "simple-bus";
- vcc3v3: fixedregulator@1 {
+ vcc3v3: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
};
};
+/* Audio */
+&am33xx_pinmux {
+ mcasp0_pins: pinmux_mcasp0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
+ AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+ AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+ AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
+ AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+ >;
+ };
+};
+
+&i2c0 {
+ tlv320aic3007: tlv320aic3007@18 {
+ compatible = "ti,tlv320aic3007";
+ reg = <0x18>;
+ AVDD-supply = <&vcc3v3>;
+ IOVDD-supply = <&vcc3v3>;
+ DRVDD-supply = <&vcc3v3>;
+ DVDD-supply = <&vdig1_reg>;
+ status = "okay";
+ };
+};
+
+&mcasp0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+ op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ serial-dir = <
+ 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+ >;
+ tx-num-evt = <16>;
+ rt-num-evt = <16>;
+ status = "okay";
+};
+
+&sound {
+ ti,model = "AM335x-Wega";
+ ti,audio-codec = <&tlv320aic3007>;
+ ti,mcasp-controller = <&mcasp0>;
+ ti,audio-routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ clocks = <&mcasp0_fck>;
+ clock-names = "mclk";
+ status = "okay";
+};
+
/* CAN Busses */
&am33xx_pinmux {
dcan1_pins: pinmux_dcan1 {
status = "okay";
};
+/* Power */
+&vdig1_reg {
+ regulator-boot-on;
+ regulator-always-on;
+};
+
/* UARTs */
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/am33xx.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,am33xx";
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
i2c0 = &i2c0;
model = "TI AM3517 CraneBoard (TMDSEVM3517)";
compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
serial3 = &uart4;
};
- ocp {
+ ocp@68000000 {
am35x_otg_hs: am35x_otg_hs@5c040000 {
compatible = "ti,omap3-musb";
ti,hwmods = "am35x_otg_hs";
model = "TeeJet Mt.Ventoux";
compatible = "teejet,mt_ventoux", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,am4372", "ti,am43";
interrupt-parent = <&wakeupgen>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0>;
+ };
aliases {
i2c0 = &i2c0;
cache-level = <2>;
};
- ocp {
+ ocp@44000000 {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
- compatible = "ti,tps65218-dcdc1";
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
};
dcdc2: regulator-dcdc2 {
- compatible = "ti,tps65218-dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
};
dcdc3: regulator-dcdc3 {
- compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
regulator-suspend-enable;
regulator-min-microvolt = <1500000>;
};
dcdc5: regulator-dcdc5 {
- compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
dcdc6: regulator-dcdc6 {
- compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo1: regulator-ldo1 {
- compatible = "ti,tps65218-ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
default-brightness-level = <8>;
};
- matrix_keypad: matrix_keypad@0 {
+ matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
- compatible = "ti,tps65218-dcdc1";
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
};
dcdc2: regulator-dcdc2 {
- compatible = "ti,tps65218-dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
};
dcdc3: regulator-dcdc3 {
- compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
};
+
dcdc5: regulator-dcdc5 {
- compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
dcdc6: regulator-dcdc6 {
- compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo1: regulator-ldo1 {
- compatible = "ti,tps65218-ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
#address-cells = <1>;
#size-cells = <0>;
- switch@0 {
+ switch0 {
label = "power-button";
linux,code = <KEY_POWER>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
};
};
- matrix_keypad: matrix_keypad@0 {
+ matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
pinctrl-names = "default";
pinctrl-names = "default";
pinctrl-0 = <&leds_pins>;
- led@0 {
+ led0 {
label = "am437x-sk:red:heartbeat";
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
linux,default-trigger = "heartbeat";
default-state = "off";
};
- led@1 {
+ led1 {
label = "am437x-sk:green:mmc1";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@2 {
+ led2 {
label = "am437x-sk:blue:cpu0";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@3 {
+ led3 {
label = "am437x-sk:blue:usr3";
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
default-state = "off";
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
- compatible = "ti,tps65218-dcdc1";
/* VDD_CORE limits min of OPP50 and max of OPP100 */
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
};
dcdc2: regulator-dcdc2 {
- compatible = "ti,tps65218-dcdc2";
/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
};
dcdc3: regulator-dcdc3 {
- compatible = "ti,tps65218-dcdc3";
regulator-name = "vdds_ddr";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
};
dcdc4: regulator-dcdc4 {
- compatible = "ti,tps65218-dcdc4";
regulator-name = "v3_3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+ dcdc5: regulator-dcdc5 {
+ compatible = "ti,tps65218-dcdc5";
+ regulator-name = "v1_0bat";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ dcdc6: regulator-dcdc6 {
+ compatible = "ti,tps65218-dcdc6";
+ regulator-name = "v1_8bat";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
ldo1: regulator-ldo1 {
- compatible = "ti,tps65218-ldo1";
regulator-name = "v1_8d";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
};
};
- matrix_keypad: matrix_keypad@0 {
+ matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
- compatible = "ti,tps65218-dcdc1";
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
};
dcdc2: regulator-dcdc2 {
- compatible = "ti,tps65218-dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
};
dcdc3: regulator-dcdc3 {
- compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
};
dcdc4: regulator-dcdc4 {
- compatible = "ti,tps65218-dcdc4";
regulator-name = "vdcdc4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
dcdc5: regulator-dcdc5 {
- compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
dcdc6: regulator-dcdc6 {
- compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo1: regulator-ldo1 {
- compatible = "ti,tps65218-ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
"ti,dra7";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
display0 = &hdmi0;
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pinctrl-names = "default";
pinctrl-0 = <&leds_pins_default>;
- led@0 {
+ led0 {
label = "beagle-x15:usr0";
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
- led@1 {
+ led1 {
label = "beagle-x15:usr1";
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@2 {
+ led2 {
label = "beagle-x15:usr2";
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@3 {
+ led3 {
label = "beagle-x15:usr3";
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
model = "CompuLab CL-SOM-AM57x";
compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
};
pinctrl-names = "default";
pinctrl-0 = <&leds_pins_default>;
- led@0 {
+ led0 {
label = "cl-som-am57x:green";
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
ti,non-removable;
max-frequency = <96000000>;
};
+
+&qspi {
+ status = "okay";
+
+ spi-max-frequency = <76800000>;
+ m25p80@0 {
+ compatible = "s25fl256s1", "jedec,spi-nor";
+ spi-max-frequency = <76800000>;
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* MTD partition table.
+ * The ROM checks the first four physical blocks
+ * for a valid file to boot and the flash here is
+ * 64KiB block size.
+ */
+ partition@0 {
+ label = "QSPI.SPL";
+ reg = <0x00000000 0x000040000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot";
+ reg = <0x00040000 0x00100000>;
+ };
+ partition@2 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00140000 0x00080000>;
+ };
+ partition@3 {
+ label = "QSPI.u-boot-env";
+ reg = <0x001c0000 0x00010000>;
+ };
+ partition@4 {
+ label = "QSPI.u-boot-env.backup1";
+ reg = <0x001d0000 0x0010000>;
+ };
+ partition@5 {
+ label = "QSPI.kernel";
+ reg = <0x001e0000 0x0800000>;
+ };
+ partition@6 {
+ label = "QSPI.file-system";
+ reg = <0x009e0000 0x01620000>;
+ };
+ };
+};
pinctrl-names = "default";
pinctrl-0 = <&nand_cs3_pins>;
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
model = "DM8148 EVM";
compatible = "ti,dm8148-evm", "ti,dm8148";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
/* MIC94060YC6 controlled by SD1_POW pin */
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
model = "HP t410 Smart Zero Client";
compatible = "hp,t410", "ti,dm8148";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
regulator-always-on;
};
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/dm814x.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,dm814";
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
i2c0 = &i2c1;
model = "DM8168 EVM";
compatible = "ti,dm8168-evm", "ti,dm8168";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000 /* 1 GB */
0xc0000000 0x40000000>; /* 1 GB */
};
/* FDC6331L controlled by SD_POW pin */
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/omap.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,dm816";
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
i2c0 = &i2c1;
model = "DRA62x J5 Eco EVM";
compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
/* MIC94060YC6 controlled by SD1_POW pin */
- vmmcsd_fixed: fixedregulator@0 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
model = "TI DRA742";
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
};
leds {
compatible = "gpio-leds";
- led@0 {
+ led0 {
label = "dra7:usr1";
gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@1 {
+ led1 {
label = "dra7:usr2";
gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@2 {
+ led2 {
label = "dra7:usr3";
gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led@3 {
+ led3 {
label = "dra7:usr4";
gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
default-state = "off";
&qspi {
status = "okay";
- spi-max-frequency = <64000000>;
+ spi-max-frequency = <76800000>;
m25p80@0 {
compatible = "s25fl256s1";
- spi-max-frequency = <64000000>;
+ spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/dra.h>
-#include "skeleton.dtsi"
-
#define MAX_SOURCES 400
/ {
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
+ linux,pci-domain = <0>;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
+ linux,pci-domain = <1>;
ti,hwmods = "pcie2";
phys = <&pcie2_phy>;
phy-names = "pcie-phy0";
ti,hwmods = "ocp2scp1";
usb2_phy1: phy@4a084000 {
- compatible = "ti,omap-usb2";
+ compatible = "ti,dra7x-usb2", "ti,omap-usb2";
reg = <0x4a084000 0x400>;
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy1_always_on_clk32k>,
mac: ethernet@48484000 {
compatible = "ti,dra7-cpsw","ti,cpsw";
ti,hwmods = "gmac";
- clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+ clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
clock-names = "fck", "cpts";
cpdma_channels = <8>;
ale_entries = <1024>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
- cpts_clock_mult = <0x80000000>;
+ cpts_clock_mult = <0x784CFE14>;
cpts_clock_shift = <29>;
reg = <0x48484000 0x1000
0x48485200 0x2E00>;
&qspi {
status = "okay";
- spi-max-frequency = <64000000>;
+ spi-max-frequency = <76800000>;
m25p80@0 {
compatible = "s25fl256s1";
- spi-max-frequency = <64000000>;
+ spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
/ {
model = "TI DRA722 Rev C EVM";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
/ {
model = "TI DRA722";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
ti,index-power-of-two;
};
+ gmac_main_clk: gmac_main_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&gmac_250m_dclk_div>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
#clock-cells = <0>;
compatible = "ti,divider-clock";
reg = <0x0c00>;
};
- gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 {
+ rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
#clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll_gmac_m2_ck>;
+ compatible = "ti,mux-clock";
+ clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
ti,bit-shift = <24>;
reg = <0x13d0>;
- ti,dividers = <2>;
};
gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
};
};
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
leds {
compatible = "gpio-leds";
user0 {
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
serial0 = &uart1;
model = "TI OMAP2420 H4 board";
compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x4000000>; /* 64 MB */
};
#include "omap2420.dtsi"
/ {
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
model = "TI OMAP2430 SDP";
compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
/ {
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
#include "omap34xx.dtsi"
/ {
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
model = "TI OMAP37XX EVM (TMDSEVM3730)";
compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
model = "TI OMAP35XX EVM (TMDSEVM3530)";
compatible = "ti,omap3-evm", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
#include "omap36xx.dtsi"
/ {
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
model = "TI OMAP3430 LDP (Zoom1 Labrador)";
compatible = "ti,omap3-ldp", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
- vemmc: fixedregulator@0 {
+ vemmc: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "VEMMC";
regulator-min-microvolt = <2900000>;
enable-active-high;
};
- vwlan_fixed: fixedregulator@2 {
+ vwlan_fixed: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "VWLAN";
gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&button_pins>;
- button0@10 {
+ button0 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio_10 */
*/
/ {
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
pwmleds {
compatible = "pwm-leds";
pinctrl-0 = <&button_pins>;
#address-cells = <1>;
#size-cells = <0>;
- button0@23 {
+ button0 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
wakeup-source;
};
- button1@14 {
+ button1 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
- lcd0: display {
+ lcd0: display@1 {
compatible = "lgphilips,lb035q02";
label = "lcd35";
pinctrl-0 = <&button_pins>;
#address-cells = <1>;
#size-cells = <0>;
- button0@23 {
+ button0 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
wakeup-source;
};
- button1@14 {
+ button1 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
pinctrl-0 = <&button_pins>;
#address-cells = <1>;
#size-cells = <0>;
- button0@23 {
+ button0 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
wakeup-source;
};
- button1@14 {
+ button1 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
pinctrl-0 = <&button_pins>;
#address-cells = <1>;
#size-cells = <0>;
- button0@23 {
+ button0 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
wakeup-source;
};
- button1@14 {
+ button1 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- led@1 {
+ led1 {
label = "pandora::sd1";
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@2 {
+ led2 {
label = "pandora::sd2";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
linux,default-trigger = "mmc1";
default-state = "off";
};
- led@3 {
+ led3 {
label = "pandora::bluetooth";
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
linux,default-trigger = "heartbeat";
default-state = "off";
};
- led@4 {
+ led4 {
label = "pandora::wifi";
gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
linux,default-trigger = "mmc2";
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/omap.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,omap3430", "ti,omap3";
interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
i2c0 = &i2c1;
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
- ocp {
+ ocp@68000000 {
compatible = "ti,omap3-l3-smx", "simple-bus";
reg = <0x68000000 0x10000>;
interrupts = <9 10>;
model = "TI OMAP3430 SDP";
compatible = "ti,omap3430-sdp", "ti,omap3";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
};
- ocp {
+ ocp@68000000 {
omap3_pmx_core2: pinmux@480025d8 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025d8 0x24>;
};
};
- ocp {
+ ocp@68000000 {
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
reg = <0x49042000 0x400>;
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- button0@121 {
+ button0 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
model = "Gumstix Duovero";
compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
model = "Amazon Kindle Fire (first generation)";
compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
#include "elpida_ecb240abacn.dtsi"
/ {
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
model = "Variscite VAR-SOM-OM44";
compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/omap.h>
-#include "skeleton.dtsi"
-
/ {
compatible = "ti,omap4430", "ti,omap4";
interrupt-parent = <&wakeupgen>;
+ #address-cells = <1>;
+ #size-cells = <1>;
aliases {
i2c0 = &i2c1;
leds {
compatible = "gpio-leds";
- led@1 {
+ led1 {
label = "omap5:blue:usr1";
gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
linux,default-trigger = "heartbeat";
model = "CompuLab CM-T54";
compatible = "compulab,omap5-cm-t54", "ti,omap5";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x7F000000>; /* 2048 MB */
};
leds {
compatible = "gpio-leds";
- led@1 {
+ led1 {
label = "Heartbeat";
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
linux,default-trigger = "heartbeat";
model = "IGEPv5";
compatible = "isee,omap5-igep0050", "ti,omap5";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x7f000000>; /* 2032 MB */
};
model = "TI OMAP5 uEVM board";
compatible = "ti,omap5-uevm", "ti,omap5";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x7F000000>; /* 2032 MB */
};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/omap.h>
-#include "skeleton.dtsi"
-
/ {
#address-cells = <1>;
#size-cells = <1>;
projects / deliverable / linux.git / commitdiff
