As noticed by Sergei in the discussion of Andrea Gelmini's patch series.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
/*
* First 32 bytes are HW specific!!!
- * Lets have some SW data following -- make sure it's 32 bytes.
+ * Let's have some SW data following -- make sure it's 32 bytes.
*/
u32 sw_status;
u32 sw_context;
/*
* during early_printk no ioremap possible at this early stage
- * lets use KSEG1 instead
+ * let's use KSEG1 instead
*/
#define LTQ_ASC0_BASE_ADDR 0x1E100C00
#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
/*
* during early_printk no ioremap is possible
- * lets use KSEG1 instead
+ * let's use KSEG1 instead
*/
#define LTQ_ASC1_BASE_ADDR 0x1E100C00
#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
/*
* OK we are here either because we hit a NAL
* instruction or because we are emulating an
- * old bltzal{,l} one. Lets figure out what the
+ * old bltzal{,l} one. Let's figure out what the
* case really is.
*/
if (!insn.i_format.rs) {
/*
* OK we are here either because we hit a BAL
* instruction or because we are emulating an
- * old bgezal{,l} one. Lets figure out what the
+ * old bgezal{,l} one. Let's figure out what the
* case really is.
*/
if (!insn.i_format.rs) {
elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;
- /* Lets see if this is an O32 ELF */
+ /* Let's see if this is an O32 ELF */
if (elf32) {
if (flags & EF_MIPS_FP64) {
/*
}
/*
- * Lets not return to userland just yet. It's costly and
+ * Let's not return to userland just yet. It's costly and
* it's likely we have more R2 instructions to emulate
*/
if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) {
static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
/*
- * Lets see what else we need to do here. Set up sp, gp?
+ * Let's see what else we need to do here. Set up sp, gp?
*/
void nmi_dump(void)
{
return -ENODEV;
/*
- * Okay, here's a xbow. Lets arbitrate and find
+ * Okay, here's a xbow. Let's arbitrate and find
* out if we should initialize it. Set enabled
* hub connected at highest or lowest widget as
* master.
static int spurious_irq_mask;
/*
* At this point we can be sure the IRQ is spurious,
- * lets ACK and report it. [once per IRQ]
+ * let's ACK and report it. [once per IRQ]
*/
if (!(spurious_irq_mask & irqmask)) {
printk(KERN_DEBUG