usb: musb: fix DMA for host mode

Commit ac33cdb16681 ("usb: musb: Remove ifdefs for musb_host_rx in
musb_host.c part5") introduces a problem setting DMA host mode.

The musb_advance_schedule() is called immediately after receiving an
endpoint RX interrupt without waiting for the DMA transfer to complete.

As a consequence when the dma complete interrupt arrives the in_qh
member of hw_ep is already null an the musb_host_rx() exits on !urb
error case. Fix the done condition that advances the musb schedule.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 79d081883628ae797c2cddd0b5df7e02c848e9f7..58487a4735218518ce50326750ca8718aaa2a516 100644 (file)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2003,10 +2003,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
                                qh->offset,
                                urb->transfer_buffer_length);
 
-                       done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh,
-                                                             urb, xfer_len,
-                                                             iso_err);
-                       if (done)
+                       if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb,
+                                                          xfer_len, iso_err))
                                goto finish;
                        else
                                dev_err(musb->controller, "error: rx_dma failed\n");