static void check_binary_download PARAMS ((CORE_ADDR addr));
+#if __STDC__
+struct packet_config;
+#endif
+
+static void show_packet_config_cmd PARAMS ((struct packet_config * config));
+
+static void set_packet_config_cmd PARAMS ((struct packet_config * config,
+ struct cmd_list_element * c));
+
+static void add_packet_config_cmd PARAMS ((struct packet_config * config,
+ char *name,
+ char *title,
+ void (*set_func) (char *args, int from_tty, struct cmd_list_element * c),
+ void (*show_func) (char *name, int from_tty),
+ struct cmd_list_element **setlist,
+ struct cmd_list_element **showlist));
+
+static void init_packet_config PARAMS ((struct packet_config * config));
+
+static void set_remote_protocol_P_packet_cmd PARAMS ((char *args,
+ int from_tty,
+ struct cmd_list_element * c));
+
+static void show_remote_protocol_P_packet_cmd PARAMS ((char *args,
+ int from_tty));
+
+
+
+
/* Define the target subroutine names */
void open_remote_target PARAMS ((char *, int, struct target_ops *, int));
static int remote_register_buf_size = 0;
-/* Should we try the 'P' request? If this is set to one when the stub
- doesn't support 'P', the only consequence is some unnecessary traffic. */
-static int stub_supports_P = 1;
+/* Generic configuration support for packets the stub optionally
+ supports. Allows the user to specify the use of the packet as well
+ as allowing GDB to auto-detect support in the remote stub. */
+
+enum packet_support
+ {
+ PACKET_SUPPORT_UNKNOWN = 0,
+ PACKET_ENABLE,
+ PACKET_DISABLE
+ };
+
+enum packet_detect
+ {
+ PACKET_AUTO_DETECT = 0,
+ PACKET_MANUAL_DETECT
+ };
+
+struct packet_config
+ {
+ char *state;
+ char *name;
+ char *title;
+ enum packet_detect detect;
+ enum packet_support support;
+ };
+
+static char packet_support_auto[] = "auto";
+static char packet_enable[] = "enable";
+static char packet_disable[] = "disable";
+static char *packet_support_enums[] =
+{
+ packet_support_auto,
+ packet_enable,
+ packet_disable,
+ 0,
+};
+
+static void
+set_packet_config_cmd (config, c)
+ struct packet_config *config;
+ struct cmd_list_element *c;
+{
+ if (config->state == packet_enable)
+ {
+ config->detect = PACKET_MANUAL_DETECT;
+ config->support = PACKET_ENABLE;
+ }
+ else if (config->state == packet_disable)
+ {
+ config->detect = PACKET_MANUAL_DETECT;
+ config->support = PACKET_DISABLE;
+ }
+ else if (config->state == packet_support_auto)
+ {
+ config->detect = PACKET_AUTO_DETECT;
+ config->support = PACKET_SUPPORT_UNKNOWN;
+ }
+ else
+ fatal ("Bad enum value");
+}
+
+static void
+show_packet_config_cmd (config)
+ struct packet_config *config;
+{
+ char *support = "internal-error";
+ switch (config->support)
+ {
+ case PACKET_ENABLE:
+ support = "enabled";
+ break;
+ case PACKET_DISABLE:
+ support = "disabled";
+ break;
+ case PACKET_SUPPORT_UNKNOWN:
+ support = "unknown";
+ break;
+ }
+ switch (config->detect)
+ {
+ case PACKET_AUTO_DETECT:
+ printf_filtered ("Support for remote protocol `%s' (%s) packet is auto-detected, currently %s.\n",
+ config->name, config->title, support);
+ break;
+ case PACKET_MANUAL_DETECT:
+ printf_filtered ("Support for remote protocol `%s' (%s) is currently %s.\n",
+ config->name, config->title, support);
+ }
+}
+
+static void
+add_packet_config_cmd (config, name, title, set_func, show_func,
+ setlist, showlist)
+ struct packet_config *config;
+ char *name;
+ char *title;
+ void (*set_func) PARAMS ((char *args, int from_tty,
+ struct cmd_list_element * c));
+ void (*show_func) PARAMS ((char *name, int from_tty));
+ struct cmd_list_element **setlist;
+ struct cmd_list_element **showlist;
+{
+ struct cmd_list_element *c;
+ char *set_doc;
+ char *show_doc;
+ char *full_name;
+ config->name = name;
+ config->title = title;
+ asprintf (&set_doc, "Set use of remote protocol `%s' (%s) packet",
+ name, title);
+ asprintf (&show_doc, "Show current use of remote protocol `%s' (%s) packet",
+ name, title);
+ asprintf (&full_name, "%s-packet", name);
+ c = add_set_enum_cmd (full_name,
+ class_obscure, packet_support_enums,
+ (char *) &config->state,
+ set_doc, setlist);
+ c->function.sfunc = set_func;
+ add_cmd (full_name, class_obscure, show_func, show_doc, showlist);
+}
+
+static void
+init_packet_config (config)
+ struct packet_config *config;
+{
+ switch (config->detect)
+ {
+ case PACKET_AUTO_DETECT:
+ config->support = PACKET_SUPPORT_UNKNOWN;
+ break;
+ case PACKET_MANUAL_DETECT:
+ /* let the user beware */
+ break;
+ }
+}
+
+/* Should we try the 'P' (set register) request? */
+
+static struct packet_config remote_protocol_P;
+
+static void
+set_remote_protocol_P_packet_cmd (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ set_packet_config_cmd (&remote_protocol_P, c);
+}
+
+static void
+show_remote_protocol_P_packet_cmd (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ show_packet_config_cmd (&remote_protocol_P);
+}
+
/* Tokens for use by the asynchronous signal handlers for SIGINT */
PTR sigint_remote_twice_token;
}
push_target (target); /* Switch to using remote target now */
- /* Start out by trying the 'P' request to set registers. We set
- this each time that we open a new target so that if the user
- switches from one stub to another, we can (if the target is
- closed and reopened) cope. */
- stub_supports_P = 1;
+ init_packet_config (&remote_protocol_P);
general_thread = -2;
continue_thread = -2;
push_target (target); /* Switch to using remote target now */
- /* Start out by trying the 'P' request to set registers. We set
- this each time that we open a new target so that if the user
- switches from one stub to another, we can (if the target is
- closed and reopened) cope. */
- stub_supports_P = 1;
+ init_packet_config (&remote_protocol_P);
general_thread = -2;
continue_thread = -2;
remote_prepare_to_store ()
{
/* Make sure the entire registers array is valid. */
- read_register_bytes (0, (char *) NULL, REGISTER_BYTES);
+ switch (remote_protocol_P.support)
+ {
+ case PACKET_DISABLE:
+ case PACKET_SUPPORT_UNKNOWN:
+ read_register_bytes (0, (char *) NULL, REGISTER_BYTES);
+ break;
+ case PACKET_ENABLE:
+ break;
+ }
+}
+
+/* Helper: Attempt to store REGNO using the P packet. Return fail IFF
+ packet was not recognized. */
+
+static int
+store_register_using_P (regno)
+ int regno;
+{
+ /* Try storing a single register. */
+ char *buf = alloca (PBUFSIZ);
+ char *regp;
+ char *p;
+ int i;
+
+ sprintf (buf, "P%x=", regno);
+ p = buf + strlen (buf);
+ regp = ®isters[REGISTER_BYTE (regno)];
+ for (i = 0; i < REGISTER_RAW_SIZE (regno); ++i)
+ {
+ *p++ = tohex ((regp[i] >> 4) & 0xf);
+ *p++ = tohex (regp[i] & 0xf);
+ }
+ *p = '\0';
+ remote_send (buf);
+
+ return buf[0] != '\0';
}
+
/* Store register REGNO, or all registers if REGNO == -1, from the contents
of REGISTERS. FIXME: ignores errors. */
set_thread (inferior_pid, 1);
- if (regno >= 0 && stub_supports_P)
+ if (regno >= 0)
{
- /* Try storing a single register. */
- char *regp;
-
- sprintf (buf, "P%x=", regno);
- p = buf + strlen (buf);
- regp = ®isters[REGISTER_BYTE (regno)];
- for (i = 0; i < REGISTER_RAW_SIZE (regno); ++i)
- {
- *p++ = tohex ((regp[i] >> 4) & 0xf);
- *p++ = tohex (regp[i] & 0xf);
- }
- *p = '\0';
- remote_send (buf);
- if (buf[0] != '\0')
+ switch (remote_protocol_P.support)
{
- /* The stub understands the 'P' request. We are done. */
- return;
+ case PACKET_DISABLE:
+ break;
+ case PACKET_ENABLE:
+ if (store_register_using_P (regno))
+ return;
+ else
+ error ("Protocol error: P packet not recognized by stub");
+ case PACKET_SUPPORT_UNKNOWN:
+ if (store_register_using_P (regno))
+ {
+ /* The stub recognized the 'P' packet. Remember this. */
+ remote_protocol_P.support = PACKET_ENABLE;
+ return;
+ }
+ else
+ {
+ /* The stub does not support the 'P' packet. Use 'G'
+ instead, and don't try using 'P' in the future (it
+ will just waste our time). */
+ remote_protocol_P.support = PACKET_DISABLE;
+ break;
+ }
}
-
- /* The stub does not support the 'P' request. Use 'G' instead,
- and don't try using 'P' in the future (it will just waste our
- time). */
- stub_supports_P = 0;
}
buf[0] = 'G';
push_target (&remote_cisco_ops); /* Switch to using cisco target now */
- /* Start out by trying the 'P' request to set registers. We set this each
- time that we open a new target so that if the user switches from one
- stub to another, we can (if the target is closed and reopened) cope. */
- stub_supports_P = 1;
+ init_packet_config (&remote_protocol_P);
general_thread = -2;
continue_thread = -2;
extended_async_remote_ops.to_mourn_inferior = extended_remote_mourn;
}
+static void
+set_remote_cmd (args, from_tty)
+ char *args;
+ int from_tty;
+{
+
+}
+
+
static void
build_remote_gdbarch_data ()
{
void
_initialize_remote ()
{
+ static struct cmd_list_element *remote_set_cmdlist;
+ static struct cmd_list_element *remote_show_cmdlist;
+
/* architecture specific data */
build_remote_gdbarch_data ();
register_gdbarch_swap (&tty_input, sizeof (&tty_input), NULL);
init_remote_threadtests ();
#endif
+ add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, "\
+Remote protocol specific variables\n\
+Configure various remote-protocol specific variables such as\n\
+the packets being used",
+ &remote_set_cmdlist, "remote ",
+ 0/*allow-unknown*/, &setlist);
+ add_prefix_cmd ("remote", class_maintenance, set_remote_cmd, "\
+Remote protocol specific variables\n\
+Configure various remote-protocol specific variables such as\n\
+the packets being used",
+ &remote_show_cmdlist, "remote ",
+ 0/*allow-unknown*/, &showlist);
+
add_cmd ("compare-sections", class_obscure, compare_sections_command,
"Compare section data on target to the exec file.\n\
Argument is a single section name (default: all loaded sections).",
add_info ("remote-process", remote_info_process,
"Query the remote system for process info.");
+ add_packet_config_cmd (&remote_protocol_P, "P", "set-register",
+ set_remote_protocol_P_packet_cmd,
+ show_remote_protocol_P_packet_cmd,
+ &remote_set_cmdlist, &remote_show_cmdlist);
}
projects / deliverable / binutils-gdb.git / commitdiff
