--- /dev/null
+/* This file is part of the program psim.
+
+ Copyright (C) 1994-1996,1998 Andrew Cagney <cagney@highland.com.au>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ */
+
+
+#include "sim-main.h"
+#include "hw-base.h"
+
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+
+/* DEVICE
+
+
+ glue - glue to interconnect and test hardware ports
+
+
+ DESCRIPTION
+
+
+ The glue device provides two functions. Firstly, it provides a
+ mechanism for inspecting and driving the port network. Secondly,
+ it provides a set of boolean primitives that can be used to apply
+ combinatorial operations to the port network.
+
+ Glue devices have a variable number of big endian <<output>>
+ registers. Each register is target-word sized. The registers can
+ be read and written.
+
+ Writing to an output register results in an event being driven
+ (level determined by the value written) on the devices
+ corresponding output port.
+
+ Reading an <<output>> register returns either the last value
+ written or the most recently computed value (for that register) as
+ a result of an event ariving on that port (which ever was computed
+ last).
+
+ At present the following sub device types are available:
+
+ <<glue>>: In addition to driving its output interrupt port with any
+ value written to an interrupt input port is stored in the
+ corresponding <<output>> register. Such input interrupts, however,
+ are not propogated to an output interrupt port.
+
+ <<glue-and>>: The bit-wise AND of the interrupt inputs is computed
+ and then both stored in <<output>> register zero and propogated to
+ output interrupt output port zero.
+
+
+ PROPERTIES
+
+
+ reg = <address> <size> (required)
+
+ Specify the address (within the parent bus) that this device is to
+ live. The address must be 2048 * sizeof (word) (8k in a 32bit
+ simulation) aligned.
+
+
+ interrupt-ranges = <int-number> <range> (optional)
+
+ If present, this specifies the number of valid interrupt inputs (up
+ to the maximum of 2048). By default, <<int-number>> is zero and
+ range is determined by the <<reg>> size.
+
+
+ PORTS
+
+
+ int[0..] (input, output)
+
+ Both an input and an output port.
+
+
+ EXAMPLES
+
+
+ Enable tracing of the device:
+
+ | -t glue-device \
+
+
+ Create source, bitwize-and, and sink glue devices. Since the
+ device at address <<0x10000>> is of size <<8>> it will have two
+ output interrupt ports.
+
+ | -o '/iobus@0xf0000000/glue@0x10000/reg 0x10000 8' \
+ | -o '/iobus@0xf0000000/glue-and@0x20000/reg 0x20000 4' \
+ | -o '/iobus@0xf0000000/glue-and/interrupt-ranges 0 2' \
+ | -o '/iobus@0xf0000000/glue@0x30000/reg 0x30000 4' \
+
+
+ Wire the two source interrupts to the AND device:
+
+ | -o '/iobus@0xf0000000/glue@0x10000 > 0 0 /iobus/glue-and' \
+ | -o '/iobus@0xf0000000/glue@0x10000 > 1 1 /iobus/glue-and' \
+
+
+ Wire the AND device up to the sink so that the and's output is not
+ left open.
+
+ | -o '/iobus@0xf0000000/glue-and > 0 0 /iobus/glue@0x30000' \
+
+
+ With the above configuration. The client program is able to
+ compute a two bit AND. For instance the <<C>> stub below prints 1
+ AND 0.
+
+ | unsigned *input = (void*)0xf0010000;
+ | unsigned *output = (void*)0xf0030000;
+ | unsigned ans;
+ | input[0] = htonl(1);
+ | input[1] = htonl(0);
+ | ans = ntohl(*output);
+ | write_string("AND is ");
+ | write_int(ans);
+ | write_line();
+
+
+ BUGS
+
+
+ A future implementation of this device may support multiple
+ interrupt ranges.
+
+ Some of the devices listed may not yet be fully implemented.
+
+ Additional devices such as a D flip-flop (DFF), an inverter (INV)
+ or a latch (LAT) may prove useful.
+
+ */
+
+
+enum {
+ max_nr_ports = 2048,
+};
+
+enum hw_glue_type {
+ glue_undefined = 0,
+ glue_io,
+ glue_and,
+ glue_nand,
+ glue_or,
+ glue_xor,
+ glue_nor,
+ glue_not,
+};
+
+struct hw_glue {
+ enum hw_glue_type type;
+ int int_number;
+ int *input;
+ int nr_inputs;
+ unsigned sizeof_input;
+ /* our output registers */
+ int space;
+ unsigned_word address;
+ unsigned sizeof_output;
+ int *output;
+ int nr_outputs;
+};
+
+
+static hw_io_read_buffer_callback hw_glue_io_read_buffer;
+static hw_io_write_buffer_callback hw_glue_io_write_buffer;
+static hw_port_event_callback hw_glue_port_event;
+const static struct hw_port_descriptor hw_glue_ports[];
+
+static void
+hw_glue_finish (struct hw *me)
+{
+ struct hw_glue *glue = HW_ZALLOC (me, struct hw_glue);
+
+ /* establish our own methods */
+ set_hw_data (me, glue);
+ set_hw_io_read_buffer (me, hw_glue_io_read_buffer);
+ set_hw_io_write_buffer (me, hw_glue_io_write_buffer);
+ set_hw_ports (me, hw_glue_ports);
+ set_hw_port_event (me, hw_glue_port_event);
+
+ /* attach to our parent bus */
+ do_hw_attach_regs (me);
+
+ /* establish the output registers */
+ {
+ reg_property_spec unit;
+ int reg_nr;
+ /* find a relevant reg entry */
+ reg_nr = 0;
+ while (hw_find_reg_array_property (me, "reg", reg_nr, &unit)
+ && !hw_unit_size_to_attach_size (hw_parent (me),
+ &unit.size,
+ &glue->sizeof_output,
+ me))
+ reg_nr++;
+ /* check out the size */
+ if (glue->sizeof_output == 0)
+ hw_abort (me, "at least one reg property size must be nonzero");
+ if (glue->sizeof_output % sizeof (unsigned_word) != 0)
+ hw_abort (me, "reg property size must be %d aligned",
+ sizeof (unsigned_word));
+ /* and the address */
+ hw_unit_address_to_attach_address (hw_parent (me),
+ &unit.address,
+ &glue->space,
+ &glue->address,
+ me);
+ if (glue->address % (sizeof (unsigned_word) * max_nr_ports) != 0)
+ hw_abort (me, "reg property address must be %d aligned",
+ sizeof (unsigned_word) * max_nr_ports);
+ glue->nr_outputs = glue->sizeof_output / sizeof (unsigned_word);
+ glue->output = hw_zalloc (me, glue->sizeof_output);
+ }
+
+ /* establish the input ports */
+ {
+ const struct hw_property *ranges;
+ ranges = hw_find_property (me, "interrupt-ranges");
+ if (ranges == NULL)
+ {
+ glue->int_number = 0;
+ glue->nr_inputs = glue->nr_outputs;
+ }
+ else if (ranges->sizeof_array != sizeof (unsigned_cell) * 2)
+ {
+ hw_abort (me, "invalid interrupt-ranges property (incorrect size)");
+ }
+ else
+ {
+ const unsigned_cell *int_range = ranges->array;
+ glue->int_number = BE2H_cell (int_range[0]);
+ glue->nr_inputs = BE2H_cell (int_range[1]);
+ }
+ glue->sizeof_input = glue->nr_inputs * sizeof (unsigned);
+ glue->input = hw_zalloc (me, glue->sizeof_input);
+ }
+
+ /* determine our type */
+ {
+ const char *name = hw_name(me);
+ if (strcmp (name, "glue") == 0)
+ glue->type = glue_io;
+ else if (strcmp (name, "glue-and") == 0)
+ glue->type = glue_and;
+ else
+ hw_abort (me, "unimplemented glue type");
+ }
+
+ HW_TRACE ((me, "int-number %d, nr_inputs %d, nr_outputs %d",
+ glue->int_number, glue->nr_inputs, glue->nr_outputs));
+}
+
+static unsigned
+hw_glue_io_read_buffer (struct hw *me,
+ void *dest,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ sim_cpu *cpu,
+ sim_cia cia)
+{
+ struct hw_glue *glue = (struct hw_glue *) hw_data (me);
+ int reg = ((addr - glue->address) / sizeof (unsigned_word)) % glue->nr_outputs;
+ if (nr_bytes != sizeof (unsigned_word)
+ || (addr % sizeof (unsigned_word)) != 0)
+ hw_abort (me, "missaligned read access (%d:0x%lx:%d) not supported",
+ space, (unsigned long)addr, nr_bytes);
+ *(unsigned_word*)dest = H2BE_4(glue->output[reg]);
+ HW_TRACE ((me, "read - port %d (0x%lx), level %d",
+ reg, (unsigned long) addr, glue->output[reg]));
+ return nr_bytes;
+}
+
+
+static unsigned
+hw_glue_io_write_buffer (struct hw *me,
+ const void *source,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ sim_cpu *cpu,
+ sim_cia cia)
+{
+ struct hw_glue *glue = (struct hw_glue *) hw_data (me);
+ int reg = ((addr - glue->address) / sizeof (unsigned_word)) % max_nr_ports;
+ if (nr_bytes != sizeof (unsigned_word)
+ || (addr % sizeof (unsigned_word)) != 0)
+ hw_abort (me, "missaligned write access (%d:0x%lx:%d) not supported",
+ space, (unsigned long) addr, nr_bytes);
+ glue->output[reg] = H2BE_4 (*(unsigned_word*)source);
+ HW_TRACE ((me, "write - port %d (0x%lx), level %d",
+ reg, (unsigned long) addr, glue->output[reg]));
+ hw_port_event (me, reg, glue->output[reg], cpu, cia);
+ return nr_bytes;
+}
+
+static void
+hw_glue_port_event (struct hw *me,
+ int my_port,
+ struct hw *source,
+ int source_port,
+ int level,
+ sim_cpu *cpu,
+ sim_cia cia)
+{
+ struct hw_glue *glue = (struct hw_glue *) hw_data (me);
+ int i;
+ if (my_port < glue->int_number
+ || my_port >= glue->int_number + glue->nr_inputs)
+ hw_abort (me, "port %d outside of valid range", my_port);
+ glue->input[my_port - glue->int_number] = level;
+ switch (glue->type)
+ {
+ case glue_io:
+ {
+ int port = my_port % glue->nr_outputs;
+ glue->output[port] = level;
+ HW_TRACE ((me, "input - port %d (0x%lx), level %d",
+ my_port,
+ (unsigned long) glue->address + port * sizeof (unsigned_word),
+ level));
+ break;
+ }
+ case glue_and:
+ {
+ glue->output[0] = glue->input[0];
+ for (i = 1; i < glue->nr_inputs; i++)
+ glue->output[0] &= glue->input[i];
+ HW_TRACE ((me, "and - port %d, level %d arrived - output %d",
+ my_port, level, glue->output[0]));
+ hw_port_event (me, 0, glue->output[0], cpu, cia);
+ break;
+ }
+ default:
+ {
+ hw_abort (me, "operator not implemented");
+ break;
+ }
+ }
+}
+
+
+static const struct hw_port_descriptor hw_glue_ports[] = {
+ { "int", 0, max_nr_ports },
+ { NULL }
+};
+
+
+const struct hw_device_descriptor dv_glue_descriptor[] = {
+ { "glue", hw_glue_finish, },
+ { "glue-and", hw_glue_finish, },
+ { "glue-nand", hw_glue_finish, },
+ { "glue-or", hw_glue_finish, },
+ { "glue-xor", hw_glue_finish, },
+ { "glue-nor", hw_glue_finish, },
+ { "glue-not", hw_glue_finish, },
+ { NULL },
+};
projects / deliverable / binutils-gdb.git / commitdiff
