Currently, when remote debugging, if you type Ctrl-C just while the
target stopped for an internal event, and GDB is busy doing something
that takes a while (e.g., fetching chunks of a shared library off of
the target, with vFile, to process ELF headers and debug info), the
Ctrl-C is lost.
The patch hooks up the QUIT macro to a new target method that lets the
target react to the double-Ctrl-C before the event loop is reached,
which allows reacting to a double-Ctrl-C even when GDB is busy doing
some long operation and not waiting for a stop reply. That end result
is:
(gdb) c
Continuing.
^C
^C
Interrupted while waiting for the program.
Give up waiting? (y or n) y
Quit
(gdb) info threads
Id Target Id Frame
* 1 Thread 11673 0x00007ffff7deb240 in _dl_debug_state () from target:/lib64/ld-linux-x86-64.so.2
(gdb)
If, however, GDB is waiting for a stop reply (because the target has
been resumed, with e.g., vCont;c), but the target isn't responding, we
now get:
(gdb) c
Continuing.
^C
^C
The target is not responding to interrupt requests.
Stop debugging it? (y or n) y
Disconnected from target.
(gdb) info threads
No threads.
This offers to disconnect, because when we're waiting for a stop
reply, there's nothing else we can send the target other than an
interrupt request. And if that doesn't work, there's nothing else we
can do.
The Ctrl-C is presently lost because until we get to a user-visible
stop, the SIGINT handler that is installed is the one that forwards
the interrupt to the remote side, with the \003 "packet" [1]. But,
gdbserver ignores an interrupt request if the program is stopped.
Still, even if it didn't, the server can only report back a
stop-because-of-SIGINT when the program is next resumed. And it may
take a while to actually re-resume the target.
[1] - In the old sync days, the remote target would react to a
double-Ctrl-C by asking users whether they wanted to give up waiting
and disconnect. The code is still there, but it it isn't reacheable
on most hosts, which support serial connections in async mode
(probably only DJGPP doesn't). Even then, in sync mode, remote.c's
SIGINT handler is only installed while the target is resumed, and is
removed as soon as the target sends back a stop reply. That means
that a Ctrl-C just while GDB is processing an internal event can end
up with an odd "Quit" at the prompt instead of "Program stopped by
SIGINT". In contrast, in async mode, remote.c's SIGINT handler is set
up as long as target_terminal_inferior or
target_terminal_ours_for_output are in effect (IOW, until we get a
user-visible stop and call target_terminal_ours), so the user
shouldn't get back a spurious Quit. However, it's still desirable to
be able to interrupt a long-running GDB operation, if GDB takes a
while to re-resume the target or get back to the event loop.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* defs.h (maybe_quit): Declare.
(QUIT): Now calls maybe_quit.
* event-loop.c (clear_async_signal_handler)
(async_signal_handler_is_marked): New functions.
* event-loop.h (async_signal_handler_is_marked)
(clear_async_signal_handler): New declarations.
* remote.c (remote_check_pending_interrupt): New function.
(interrupt_query): Use make_cleanup_restore_target_terminal. No
longer check whether the target is async. If waiting for a stop
reply, and a Ctrl-C as been sent to the target, offer to
disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
Otherwise do not disconnect and throw a quit.
(_initialize_remote): Install remote_check_pending_interrupt as
to_check_pending_interrupt.
* target.c (target_check_pending_interrupt): New function.
* target.h (struct target_ops) <to_check_pending_interrupt>: New
field.
(target_check_pending_interrupt): New declaration.
* utils.c (maybe_quit): New function.
* target-delegates.c: Regenerate.
+2015-08-24 Pedro Alves <palves@redhat.com>
+
+ * defs.h (maybe_quit): Declare.
+ (QUIT): Now calls maybe_quit.
+ * event-loop.c (clear_async_signal_handler)
+ (async_signal_handler_is_marked): New functions.
+ * event-loop.h (async_signal_handler_is_marked)
+ (clear_async_signal_handler): New declarations.
+ * remote.c (remote_check_pending_interrupt): New function.
+ (interrupt_query): Use make_cleanup_restore_target_terminal. No
+ longer check whether the target is async. If waiting for a stop
+ reply, and a Ctrl-C as been sent to the target, offer to
+ disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
+ Otherwise do not disconnect and throw a quit.
+ (_initialize_remote): Install remote_check_pending_interrupt as
+ to_check_pending_interrupt.
+ * target.c (target_check_pending_interrupt): New function.
+ * target.h (struct target_ops) <to_check_pending_interrupt>: New
+ field.
+ (target_check_pending_interrupt): New declaration.
+ * utils.c (maybe_quit): New function.
+ * target-delegates.c: Regenerate.
+
2015-08-25 Yao Qi <yao.qi@linaro.org>
* nat/aarch64-linux-hw-point.c (debug_reg_change_callback):
extern void quit (void);
-/* FIXME: cagney/2000-03-13: It has been suggested that the peformance
- benefits of having a ``QUIT'' macro rather than a function are
- marginal. If the overhead of a QUIT function call is proving
- significant then its calling frequency should probably be reduced
- [kingdon]. A profile analyzing the current situtation is
- needed. */
-
-#define QUIT { \
- if (check_quit_flag () || sync_quit_force_run) quit (); \
- if (deprecated_interactive_hook) deprecated_interactive_hook (); \
-}
+/* Helper for the QUIT macro. */
+
+extern void maybe_quit (void);
+
+/* Check whether a Ctrl-C was typed, and if so, call quit. The target
+ is given a chance to process the Ctrl-C. E.g., it may detect that
+ repeated Ctrl-C requests were issued, and choose to close the
+ connection. */
+#define QUIT maybe_quit ()
/* * Languages represented in the symbol table and elsewhere.
This should probably be in language.h, but since enum's can't
async_handler_ptr->ready = 1;
}
+/* See event-loop.h. */
+
+void
+clear_async_signal_handler (async_signal_handler *async_handler_ptr)
+{
+ async_handler_ptr->ready = 0;
+}
+
+/* See event-loop.h. */
+
+int
+async_signal_handler_is_marked (async_signal_handler *async_handler_ptr)
+{
+ return async_handler_ptr->ready;
+}
+
/* Call all the handlers that are ready. Returns true if any was
indeed ready. */
static int
below, with IMMEDIATE_P == 0. */
void mark_async_signal_handler (struct async_signal_handler *handler);
+/* Returns true if HANDLER is marked ready. */
+
+extern int
+ async_signal_handler_is_marked (struct async_signal_handler *handler);
+
+/* Mark HANDLER as NOT ready. */
+
+extern void clear_async_signal_handler (struct async_signal_handler *handler);
+
/* Wrapper for the body of signal handlers. Call this function from
any SIGINT handler which needs to access GDB data structures or
escape via longjmp. If IMMEDIATE_P is set, this triggers either
gdb_call_async_signal_handler (async_sigint_remote_twice_token, 0);
}
+/* Implementation of to_check_pending_interrupt. */
+
+static void
+remote_check_pending_interrupt (struct target_ops *self)
+{
+ struct async_signal_handler *token = async_sigint_remote_twice_token;
+
+ if (async_signal_handler_is_marked (token))
+ {
+ clear_async_signal_handler (token);
+ call_async_signal_handler (token);
+ }
+}
+
/* Perform the real interruption of the target execution, in response
to a ^C. */
static void
static void
interrupt_query (void)
{
+ struct remote_state *rs = get_remote_state ();
+ struct cleanup *old_chain;
+
+ old_chain = make_cleanup_restore_target_terminal ();
target_terminal_ours ();
- if (target_is_async_p ())
- {
- signal (SIGINT, handle_sigint);
- quit ();
- }
- else
+ if (rs->waiting_for_stop_reply && rs->ctrlc_pending_p)
{
- if (query (_("Interrupted while waiting for the program.\n\
-Give up (and stop debugging it)? ")))
+ if (query (_("The target is not responding to interrupt requests.\n"
+ "Stop debugging it? ")))
{
remote_unpush_target ();
- quit ();
+ throw_error (TARGET_CLOSE_ERROR, _("Disconnected from target."));
}
}
+ else
+ {
+ if (query (_("Interrupted while waiting for the program.\n"
+ "Give up waiting? ")))
+ quit ();
+ }
- target_terminal_inferior ();
+ do_cleanups (old_chain);
}
/* Enable/disable target terminal ownership. Most targets can use
remote_ops.to_get_ada_task_ptid = remote_get_ada_task_ptid;
remote_ops.to_stop = remote_stop;
remote_ops.to_interrupt = remote_interrupt;
+ remote_ops.to_check_pending_interrupt = remote_check_pending_interrupt;
remote_ops.to_xfer_partial = remote_xfer_partial;
remote_ops.to_rcmd = remote_rcmd;
remote_ops.to_pid_to_exec_file = remote_pid_to_exec_file;
fputs_unfiltered (")\n", gdb_stdlog);
}
+static void
+delegate_check_pending_interrupt (struct target_ops *self)
+{
+ self = self->beneath;
+ self->to_check_pending_interrupt (self);
+}
+
+static void
+tdefault_check_pending_interrupt (struct target_ops *self)
+{
+}
+
+static void
+debug_check_pending_interrupt (struct target_ops *self)
+{
+ fprintf_unfiltered (gdb_stdlog, "-> %s->to_check_pending_interrupt (...)\n", debug_target.to_shortname);
+ debug_target.to_check_pending_interrupt (&debug_target);
+ fprintf_unfiltered (gdb_stdlog, "<- %s->to_check_pending_interrupt (", debug_target.to_shortname);
+ target_debug_print_struct_target_ops_p (&debug_target);
+ fputs_unfiltered (")\n", gdb_stdlog);
+}
+
static void
delegate_rcmd (struct target_ops *self, const char *arg1, struct ui_file *arg2)
{
ops->to_stop = delegate_stop;
if (ops->to_interrupt == NULL)
ops->to_interrupt = delegate_interrupt;
+ if (ops->to_check_pending_interrupt == NULL)
+ ops->to_check_pending_interrupt = delegate_check_pending_interrupt;
if (ops->to_rcmd == NULL)
ops->to_rcmd = delegate_rcmd;
if (ops->to_pid_to_exec_file == NULL)
ops->to_thread_name = tdefault_thread_name;
ops->to_stop = tdefault_stop;
ops->to_interrupt = tdefault_interrupt;
+ ops->to_check_pending_interrupt = tdefault_check_pending_interrupt;
ops->to_rcmd = default_rcmd;
ops->to_pid_to_exec_file = tdefault_pid_to_exec_file;
ops->to_log_command = tdefault_log_command;
ops->to_thread_name = debug_thread_name;
ops->to_stop = debug_stop;
ops->to_interrupt = debug_interrupt;
+ ops->to_check_pending_interrupt = debug_check_pending_interrupt;
ops->to_rcmd = debug_rcmd;
ops->to_pid_to_exec_file = debug_pid_to_exec_file;
ops->to_log_command = debug_log_command;
(*current_target.to_interrupt) (¤t_target, ptid);
}
+/* See target.h. */
+
+void
+target_check_pending_interrupt (void)
+{
+ (*current_target.to_check_pending_interrupt) (¤t_target);
+}
+
/* See target/target.h. */
void
TARGET_DEFAULT_IGNORE ();
void (*to_interrupt) (struct target_ops *, ptid_t)
TARGET_DEFAULT_IGNORE ();
+ void (*to_check_pending_interrupt) (struct target_ops *)
+ TARGET_DEFAULT_IGNORE ();
void (*to_rcmd) (struct target_ops *,
const char *command, struct ui_file *output)
TARGET_DEFAULT_FUNC (default_rcmd);
extern void target_interrupt (ptid_t ptid);
+/* Some targets install their own SIGINT handler while the target is
+ running. This method is called from the QUIT macro to give such
+ targets a chance to process a Ctrl-C. The target may e.g., choose
+ to interrupt the (potentially) long running operation, or give up
+ waiting and disconnect. */
+
+extern void target_check_pending_interrupt (void);
+
/* Send the specified COMMAND to the target's monitor
(shell,interpreter) for execution. The result of the query is
placed in OUTBUF. */
#endif
}
+/* See defs.h. */
+
+void
+maybe_quit (void)
+{
+ if (check_quit_flag () || sync_quit_force_run)
+ quit ();
+ if (deprecated_interactive_hook)
+ deprecated_interactive_hook ();
+ target_check_pending_interrupt ();
+}
+
\f
/* Called when a memory allocation fails, with the number of bytes of
memory requested in SIZE. */
projects / deliverable / binutils-gdb.git / commitdiff
