arm64: dts: msm8996: add support to blsp2_spi5

This patch adds support to blsp2_spi5 device, which is used in some of
the APQ8096 based boards.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e0090636491db692e5856564696a0a61f597485d..f68b078b1cb9d9c3847ef183f21f11e306827c08 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -231,6 +231,21 @@
                        status = "disabled";
                };
 
+               blsp2_spi5: spi@075ba000{
+                       compatible = "qcom,spi-qup-v2.2.1";
+                       reg = <0x075ba000 0x600>;
+                       interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
+                                <&gcc GCC_BLSP2_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       pinctrl-names = "default", "sleep";
+                       pinctrl-0 = <&blsp2_spi5_default>;
+                       pinctrl-1 = <&blsp2_spi5_sleep>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
                msmgpio: pinctrl@1010000 {
                        compatible = "qcom,msm8996-pinctrl";
                        reg = <0x01010000 0x300000>;