--- /dev/null
+# Apply these patches to GDB to produce an Energize GDB.
+# To apply these patches, first cd to gdb-XX/gdb, run "patch -p0 <thisfile",
+# and then Sanitize.
+
+===================================================================
+
+diff -rc .Sanitize .Sanitize
+*** .Sanitize Mon Jun 22 23:26:00 1992
+--- .Sanitize Sat Jun 27 12:29:59 1992
+***************
+*** 53,58 ****
+--- 53,59 ----
+ buildsym.c
+ buildsym.h
+ c-exp.y
++ cadillac.c
+ call-cmds.h
+ coffread.c
+ command.c
+***************
+*** 70,75 ****
+--- 71,77 ----
+ cplus-dem.c
+ createtags
+ dbxread.c
++ deblib
+ defs.h
+ demangle.h
+ depend
+diff -rc Makefile.in Makefile.in
+*** Makefile.in Sat Jun 27 12:16:43 1992
+--- Makefile.in Sat Jun 27 12:31:29 1992
+***************
+*** 123,128 ****
+--- 123,135 ----
+ READLINE_DEP = $$(READLINE_DIR)
+ RL_LIB = ./../readline${subdir}/libreadline.a
+
++ # Cadillac libraries
++ CONNECTION_DIR = deblib/connection
++ CONNECTION_LIB = ${CONNECTION_DIR}/libconn.a
++ CADILLAC_DIR = ${srcdir}/deblib
++ CADILLAC_INCLUDES = -I${CADILLAC_DIR}/connection -I${CADILLAC_DIR}/debugger
++ CADILLAC_LIBS = ${CONNECTION_LIB}
++
+ # All the includes used for CFLAGS and for lint.
+ # -I. for config files.
+ # -I${srcdir} possibly for regex.h also.
+***************
+*** 155,166 ****
+ # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
+ # TERMCAP comes after readline, since readline depends on it.
+ CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
+! ${XM_CLIBS} ${TM_CLIBS}
+ CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
+ ${RL_LIB} ${MMALLOC_LIB}
+
+ ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
+! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
+
+ VERSION = 4.5.6
+ DIST=gdb
+--- 162,174 ----
+ # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
+ # TERMCAP comes after readline, since readline depends on it.
+ CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
+! ${XM_CLIBS} ${TM_CLIBS} ${CADILLAC_LIBS}
+ CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
+ ${RL_LIB} ${MMALLOC_LIB}
+
+ ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
+! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
+! ${CONNECTION_LIB}
+
+ VERSION = 4.5.6
+ DIST=gdb
+***************
+*** 176,182 ****
+ # demangling. For other demangling styles, such as the Annotated C++
+ # Reference Manual (section 7.2.1c) style, set this define in the target-
+ # dependent makefile fragment.
+! DEMANGLE_OPTS=
+
+ # Host and target-dependent makefile fragments come in here.
+ ####
+--- 184,195 ----
+ # demangling. For other demangling styles, such as the Annotated C++
+ # Reference Manual (section 7.2.1c) style, set this define in the target-
+ # dependent makefile fragment.
+! #
+! # For Energize, default to using style specified in the Annotated C++
+! # Reference Manual, section 7.2.1c, which is what is used by the Lucid C++
+! # compiler for most things. But there are places where Lucid varies from
+! # the ARM, so select the Lucid specific code also.
+! DEMANGLE_OPTS=-DARM_DEMANGLING -DLUCID_DEMANGLING
+
+ # Host and target-dependent makefile fragments come in here.
+ ####
+***************
+*** 194,200 ****
+ ${DEMANGLER}.c mem-break.c target.c inftarg.c \
+ dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
+ ieee-float.c language.c parse.c buildsym.c objfiles.c \
+! minsyms.c mipsread.c
+
+ # Source files in subdirectories (which will be handled separately by
+ # 'make gdb.tar.Z').
+--- 207,213 ----
+ ${DEMANGLER}.c mem-break.c target.c inftarg.c \
+ dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
+ ieee-float.c language.c parse.c buildsym.c objfiles.c \
+! minsyms.c mipsread.c cadillac.c
+
+ # Source files in subdirectories (which will be handled separately by
+ # 'make gdb.tar.Z').
+***************
+*** 279,285 ****
+ command.o utils.o expprint.o environ.o version.o gdbtypes.o \
+ copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
+ inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
+! buildsym.o objfiles.o minsyms.o \
+ dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
+
+ RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
+--- 292,298 ----
+ command.o utils.o expprint.o environ.o version.o gdbtypes.o \
+ copying.o $(DEPFILES) ${DEMANGLER}.o mem-break.o target.o \
+ inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
+! buildsym.o objfiles.o minsyms.o cadillac.o \
+ dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
+
+ RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
+***************
+*** 292,298 ****
+
+ NTSSTART = kdb-start.o
+
+! SUBDIRS = doc
+
+ # For now, shortcut the "configure GDB for fewer languages" stuff.
+ YYFILES = c-exp.tab.c m2-exp.tab.c
+--- 305,311 ----
+
+ NTSSTART = kdb-start.o
+
+! SUBDIRS = doc ${CONNECTION_DIR}
+
+ # For now, shortcut the "configure GDB for fewer languages" stuff.
+ YYFILES = c-exp.tab.c m2-exp.tab.c
+***************
+*** 346,351 ****
+--- 359,378 ----
+ #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
+ echo "Load .c corresponding to:" $(DEPFILES)
+
++ ${CONNECTION_LIB} :
++ @(cd ${CONNECTION_DIR}; \
++ $(MAKE) \
++ "against=$(against)" \
++ "AR=$(AR)" \
++ "AR_FLAGS=$(AR_FLAGS)" \
++ "CC=$(CC)" \
++ "CFLAGS=$(CFLAGS)" \
++ "RANLIB=$(RANLIB)" \
++ "MAKEINFO=$(MAKEINFO)" \
++ "INSTALL=$(INSTALL)" \
++ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
++ "INSTALL_DATA=$(INSTALL_DATA)" \
++ "BISON=$(BISON)")
+
+ # This is useful when debugging GDB, because some Unix's don't let you run GDB
+ # on itself without copying the executable. So "make gdb1" will make
+***************
+*** 694,699 ****
+--- 721,729 ----
+
+ ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
+ ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
++
++ cadillac.o: ${srcdir}/cadillac.c
++ ${CC} -c ${INTERNAL_CFLAGS} ${CADILLAC_INCLUDES} ${srcdir}/cadillac.c
+
+ lint: $(LINTFILES)
+ $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
+diff -rc breakpoint.c breakpoint.c
+*** breakpoint.c Wed Jun 17 14:53:28 1992
+--- breakpoint.c Sat Jun 27 12:30:01 1992
+***************
+*** 273,278 ****
+--- 273,280 ----
+ b->cond_string = NULL;
+ if (from_tty)
+ printf_filtered ("Breakpoint %d now unconditional.\n", bnum);
++ if (cadillac)
++ cadillac_condition_breakpoint(b);
+ }
+ else
+ {
+***************
+*** 281,286 ****
+--- 283,290 ----
+ typed in or the decompiled expression. */
+ b->cond_string = savestring (arg, strlen (arg));
+ b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
++ if (cadillac)
++ cadillac_condition_breakpoint(b);
+ if (*arg)
+ error ("Junk at end of expression");
+ }
+***************
+*** 316,330 ****
+ ALL_BREAKPOINTS (b)
+ if (b->number == bnum)
+ {
+! if (from_tty && input_from_terminal_p ())
+! {
+! printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
+ End with a line saying just \"end\".\n", bnum);
+- fflush (stdout);
+- }
+ l = read_command_lines ();
+ free_command_lines (&b->commands);
+ b->commands = l;
+ return;
+ }
+ error ("No breakpoint number %d.", bnum);
+--- 320,333 ----
+ ALL_BREAKPOINTS (b)
+ if (b->number == bnum)
+ {
+! if ((from_tty && input_from_terminal_p ()) || cadillac)
+! printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
+ End with a line saying just \"end\".\n", bnum);
+ l = read_command_lines ();
+ free_command_lines (&b->commands);
+ b->commands = l;
++ if (cadillac)
++ cadillac_commands_breakpoint(b);
+ return;
+ }
+ error ("No breakpoint number %d.", bnum);
+***************
+*** 925,930 ****
+--- 928,935 ----
+ {
+ b->ignore_count--;
+ this_bp_stop = 0;
++ if (cadillac)
++ cadillac_ignore_breakpoint(b);
+ }
+ else
+ {
+***************
+*** 1365,1370 ****
+--- 1370,1378 ----
+ mention (b)
+ struct breakpoint *b;
+ {
++ if (cadillac)
++ cadillac_create_breakpoint(b);
++
+ switch (b->type)
+ {
+ case bp_watchpoint:
+***************
+*** 2106,2111 ****
+--- 2114,2122 ----
+ register struct breakpoint *b;
+ register bpstat bs;
+
++ if (cadillac)
++ cadillac_delete_breakpoint(bpt);
++
+ if (bpt->inserted)
+ target_remove_breakpoint(bpt->address, bpt->shadow_contents);
+
+***************
+*** 2277,2282 ****
+--- 2288,2295 ----
+ if (b->number == bptnum)
+ {
+ b->ignore_count = count;
++ if (cadillac)
++ cadillac_ignore_breakpoint(b);
+ if (!from_tty)
+ return;
+ else if (count == 0)
+***************
+*** 2301,2307 ****
+ struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+! b->ignore_count = 0;
+ }
+
+ /* Command to set ignore-count of breakpoint N to COUNT. */
+--- 2314,2324 ----
+ struct breakpoint *b;
+
+ ALL_BREAKPOINTS (b)
+! {
+! b->ignore_count = 0;
+! if (cadillac)
+! cadillac_ignore_breakpoint(b);
+! }
+ }
+
+ /* Command to set ignore-count of breakpoint N to COUNT. */
+***************
+*** 2368,2373 ****
+--- 2385,2393 ----
+ {
+ bpt->enable = enabled;
+
++ if (cadillac)
++ cadillac_enable_breakpoint(bpt);
++
+ if (xgdb_verbose && bpt->type == bp_breakpoint)
+ printf ("breakpoint #%d enabled\n", bpt->number);
+
+***************
+*** 2415,2420 ****
+--- 2435,2443 ----
+ disable_breakpoint (bpt)
+ struct breakpoint *bpt;
+ {
++ if (cadillac)
++ cadillac_disable_breakpoint(bpt);
++
+ bpt->enable = disabled;
+
+ if (xgdb_verbose && bpt->type == bp_breakpoint)
+diff -rc command.c command.c
+*** command.c Mon Jun 22 20:33:41 1992
+--- command.c Sat Jun 27 12:30:01 1992
+***************
+*** 1149,1155 ****
+ }
+
+ if (pid != -1)
+! while ((rc = wait (&status)) != pid && rc != -1)
+ ;
+ else
+ error ("Fork failed");
+--- 1149,1155 ----
+ }
+
+ if (pid != -1)
+! while ((rc = cadillac ? cadillac_wait(&status) : wait (&status)) != pid && rc != -1)
+ ;
+ else
+ error ("Fork failed");
+diff -rc config/amix.mh config/amix.mh
+*** config/amix.mh Tue Jun 9 19:05:16 1992
+--- config/amix.mh Sat Jun 27 12:31:29 1992
+***************
+*** 22,24 ****
+--- 22,31 ----
+
+ # SVR4 puts the BSD compatible install in /usr/ucb.
+ INSTALL = /usr/ucb/install -c
++
++ # These are the libs that are needed for the Cadillac version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ CONNECTION_LIB = deblib/connection/libconn.a
++ CADILLAC_LIBS = ${CONNECTION_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
++ -lsocket -lc /usr/ucblib/libucb.a -lnsl
+diff -rc config/ncr3000.mh config/ncr3000.mh
+*** config/ncr3000.mh Mon Jun 15 12:25:13 1992
+--- config/ncr3000.mh Sat Jun 27 12:31:30 1992
+***************
+*** 38,40 ****
+--- 38,47 ----
+ # The /usr/ucb/install program is incompatible (complains about unknown
+ # group staff). Use good old cp...
+ INSTALL = cp
++
++ # These are the libs that are needed for the Cadillac version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ CONNECTION_LIB = deblib/connection/libconn.a
++ CADILLAC_LIBS = ${CONNECTION_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
++ -lsocket -lc /usr/ucblib/libucb.a -lnsl
+diff -rc configure.in configure.in
+*** configure.in Mon Jun 22 17:25:00 1992
+--- configure.in Sat Jun 27 12:31:29 1992
+***************
+*** 1,4 ****
+! configdirs="doc"
+ srcname="GDB"
+ srctrigger=main.c
+ target_dependent=true
+--- 1,4 ----
+! configdirs="deblib doc"
+ srcname="GDB"
+ srctrigger=main.c
+ target_dependent=true
+diff -rc defs.h defs.h
+*** defs.h Thu Jun 25 04:50:31 1992
+--- defs.h Sat Jun 27 12:30:02 1992
+***************
+*** 770,773 ****
+--- 770,842 ----
+ extern CORE_ADDR
+ push_word ();
+
++ /* Energize/Cadillac stuff */
++
++ /* Non-zero means that we're doing the cadillac interface. */
++ extern int cadillac;
++
++ /* Get a pty for use with cadillac */
++ extern char *cadillac_getpty PARAMS ((void));
++
++ /* Notify cadillac of new process creation */
++ extern void cadillac_new_process PARAMS ((void));
++
++ /* Low level wait routine for wait_for_inferior */
++ extern int cadillac_wait PARAMS ((int *));
++
++ /* Initialize */
++ extern void cadillac_initialize PARAMS ((char *, char *));
++
++ /* Main loop for cadillac protocol driver */
++ extern void cadillac_main_loop PARAMS ((void));
++
++ struct cmd_list_element;
++
++ /* Command hook for cadillac */
++ extern void cadillac_call_command PARAMS ((struct cmd_list_element *,
++ char *, int));
++
++ /* Read commands for the command command, and others */
++ extern char *cadillac_command_line_input PARAMS ((void));
++
++ struct symbol;
++ struct type;
++
++ extern void cadillac_start_variable_annotation PARAMS ((char *,
++ struct symbol *,
++ struct type *,
++ CORE_ADDR,
++ char *));
++
++ extern void cadillac_end_variable_annotation PARAMS ((void));
++
++ extern void cadillac_annotate_function PARAMS ((char *, int, int));
++
++ struct objfile;
++ extern void cadillac_symbol_file PARAMS ((struct objfile *));
++
++ /*extern void cadillac_query PARAMS ((char *, ...));*/
++ extern void cadillac_query (); /* Prototypes for varargs don't work */
++
++ extern char *cadillac_command_line_input PARAMS ((void));
++
++ extern void cadillac_acknowledge_query PARAMS ((char *));
++
++ extern void cadillac_fputs PARAMS ((const char *));
++
++ struct breakpoint;
++ extern void cadillac_condition_breakpoint PARAMS ((struct breakpoint *));
++
++ extern void cadillac_commands_breakpoint PARAMS ((struct breakpoint *));
++
++ extern void cadillac_ignore_breakpoint PARAMS ((struct breakpoint *));
++
++ extern void cadillac_create_breakpoint PARAMS ((struct breakpoint *));
++
++ extern void cadillac_delete_breakpoint PARAMS ((struct breakpoint *));
++
++ extern void cadillac_enable_breakpoint PARAMS ((struct breakpoint *));
++
++ extern void cadillac_disable_breakpoint PARAMS ((struct breakpoint *));
++
+ #endif /* !defined (DEFS_H) */
+diff -rc inflow.c inflow.c
+*** inflow.c Tue Jun 23 21:49:19 1992
+--- inflow.c Sat Jun 27 12:30:03 1992
+***************
+*** 81,87 ****
+ static short pgrp_inferior;
+ static short pgrp_ours;
+ # else /* not def SHORT_PGRP */
+! static int pgrp_inferior;
+ static int pgrp_ours;
+ # endif /* not def SHORT_PGRP */
+ #else /* not def TIOCGPGRP */
+--- 81,87 ----
+ static short pgrp_inferior;
+ static short pgrp_ours;
+ # else /* not def SHORT_PGRP */
+! int pgrp_inferior;
+ static int pgrp_ours;
+ # endif /* not def SHORT_PGRP */
+ #else /* not def TIOCGPGRP */
+diff -rc infrun.c infrun.c
+*** infrun.c Tue Jun 23 21:49:22 1992
+--- infrun.c Sat Jun 27 12:30:04 1992
+***************
+*** 617,622 ****
+--- 617,624 ----
+ Here we must get it up to actual execution of the real program. */
+
+ inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
++ if (cadillac)
++ cadillac_new_process();
+
+ clear_proceed_status ();
+
+***************
+*** 755,760 ****
+--- 757,764 ----
+
+ attach (pid);
+ inferior_pid = pid;
++ if (cadillac)
++ cadillac_new_process();
+ push_target (&child_ops);
+
+ mark_breakpoints_out ();
+diff -rc inftarg.c inftarg.c
+*** inftarg.c Sun Mar 29 15:21:27 1992
+--- inftarg.c Sat Jun 27 12:30:04 1992
+***************
+*** 58,64 ****
+ #ifdef USE_PROC_FS
+ pid = proc_wait (status);
+ #else
+! pid = wait (status);
+ #endif
+ if (pid == -1) /* No more children to wait for */
+ {
+--- 58,67 ----
+ #ifdef USE_PROC_FS
+ pid = proc_wait (status);
+ #else
+! if (cadillac)
+! pid = cadillac_wait (status);
+! else
+! pid = wait (status);
+ #endif
+ if (pid == -1) /* No more children to wait for */
+ {
+diff -rc main.c main.c
+*** main.c Mon Jun 8 23:09:23 1992
+--- main.c Sat Jun 27 12:30:05 1992
+***************
+*** 397,402 ****
+--- 397,403 ----
+ char *corearg = NULL;
+ char *cdarg = NULL;
+ char *ttyarg = NULL;
++ char *cadillac_id = NULL;
+
+ /* Pointers to all arguments of +command option. */
+ char **cmdarg;
+***************
+*** 492,497 ****
+--- 493,499 ----
+ {"tty", required_argument, 0, 't'},
+ {"baud", required_argument, 0, 'b'},
+ {"b", required_argument, 0, 'b'},
++ {"context", required_argument, 0, 12},
+ /* Allow machine descriptions to add more options... */
+ #ifdef ADDITIONAL_OPTIONS
+ ADDITIONAL_OPTIONS
+***************
+*** 524,529 ****
+--- 526,534 ----
+ case 11:
+ cdarg = optarg;
+ break;
++ case 12:
++ cadillac_id = optarg;
++ break;
+ case 's':
+ symarg = optarg;
+ break;
+***************
+*** 670,675 ****
+--- 675,683 ----
+ free ((PTR)dirarg);
+ do_cleanups (ALL_CLEANUPS);
+
++ if (cadillac_id)
++ cadillac_initialize (cadillac_id, execarg);
++
+ if (execarg != NULL
+ && symarg != NULL
+ && strcmp (execarg, symarg) == 0)
+***************
+*** 691,696 ****
+--- 699,705 ----
+ if (!setjmp (to_top_level))
+ symbol_file_command (symarg, 0);
+ }
++
+ do_cleanups (ALL_CLEANUPS);
+
+ /* After the symbol file has been read, print a newline to get us
+***************
+*** 818,824 ****
+ if (!setjmp (to_top_level))
+ {
+ do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
+! command_loop ();
+ quit_command ((char *)0, instream == stdin);
+ }
+ }
+--- 827,836 ----
+ if (!setjmp (to_top_level))
+ {
+ do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
+! if (cadillac_id)
+! cadillac_main_loop();
+! else
+! command_loop ();
+ quit_command ((char *)0, instream == stdin);
+ }
+ }
+***************
+*** 880,886 ****
+ else if (c->function.cfunc == NO_FUNCTION)
+ error ("That is not a command, just a help topic.");
+ else
+! (*c->function.cfunc) (arg, from_tty & caution);
+ }
+
+ /* Tell the user if the language has changed (except first time). */
+--- 892,901 ----
+ else if (c->function.cfunc == NO_FUNCTION)
+ error ("That is not a command, just a help topic.");
+ else
+! if (cadillac)
+! cadillac_call_command (c, arg, from_tty & caution);
+! else
+! (*c->function.cfunc) (arg, from_tty & caution);
+ }
+
+ /* Tell the user if the language has changed (except first time). */
+***************
+*** 1516,1522 ****
+ while (1)
+ {
+ dont_repeat ();
+! p = command_line_input ((char *) NULL, instream == stdin);
+ if (p == NULL)
+ /* Treat end of file like "end". */
+ break;
+--- 1531,1540 ----
+ while (1)
+ {
+ dont_repeat ();
+! if (cadillac)
+! p = cadillac_command_line_input();
+! else
+! p = command_line_input ((char *) NULL, instream == stdin);
+ if (p == NULL)
+ /* Treat end of file like "end". */
+ break;
+***************
+*** 1820,1826 ****
+ void
+ print_prompt ()
+ {
+! printf ("%s", prompt);
+ fflush (stdout);
+ }
+ \f
+--- 1838,1844 ----
+ void
+ print_prompt ()
+ {
+! printf_filtered ("%s", prompt);
+ fflush (stdout);
+ }
+ \f
+diff -rc printcmd.c printcmd.c
+*** printcmd.c Thu Jun 25 03:58:47 1992
+--- printcmd.c Sat Jun 27 12:30:05 1992
+***************
+*** 778,783 ****
+--- 778,792 ----
+ {
+ int histindex = record_latest_value (val);
+
++ if (cadillac)
++ {
++ char buf[20];
++
++ sprintf(buf, "$%d", histindex);
++ cadillac_start_variable_annotation(buf, NULL, VALUE_TYPE(val),
++ VALUE_ADDRESS(val), "");
++ }
++
+ if (inspect)
+ printf ("\031(gdb-makebuffer \"%s\" %d '(\"", exp, histindex);
+ else
+***************
+*** 784,789 ****
+--- 793,800 ----
+ if (histindex >= 0) printf_filtered ("$%d = ", histindex);
+
+ print_formatted (val, format, fmt.size);
++ if (cadillac)
++ cadillac_end_variable_annotation();
+ printf_filtered ("\n");
+ if (inspect)
+ printf("\") )\030");
+***************
+*** 1610,1620 ****
+--- 1621,1641 ----
+ standard indentation here is 4 spaces, and val_print indents
+ 2 for each recurse. */
+ val = read_var_value (sym, FRAME_INFO_ID (fi));
++
++ if (cadillac)
++ cadillac_start_variable_annotation(SYMBOL_NAME(sym), sym,
++ VALUE_TYPE(val),
++ VALUE_ADDRESS(val), "");
++
+ if (val)
+ val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), VALUE_ADDRESS (val),
+ stream, 0, 0, 2, Val_no_prettyprint);
+ else
+ fputs_filtered ("???", stream);
++
++ if (cadillac)
++ cadillac_end_variable_annotation();
++
+ first = 0;
+ }
+
+diff -rc stack.c stack.c
+*** stack.c Sat Jun 20 16:30:33 1992
+--- stack.c Sat Jun 27 12:30:06 1992
+***************
+*** 159,165 ****
+ if (addressprint)
+ printf_filtered ("%s in ", local_hex_string(fi->pc));
+
+! fputs_demangled (fname, stdout, 0);
+ fputs_filtered (" (...)\n", stdout);
+
+ return;
+--- 159,168 ----
+ if (addressprint)
+ printf_filtered ("%s in ", local_hex_string(fi->pc));
+
+! if (cadillac)
+! cadillac_annotate_function(fname, 0, level);
+! else
+! fputs_demangled (fname, stdout, 0);
+ fputs_filtered (" (...)\n", stdout);
+
+ return;
+***************
+*** 218,224 ****
+ if (addressprint)
+ if (fi->pc != sal.pc || !sal.symtab)
+ printf_filtered ("%s in ", local_hex_string(fi->pc));
+! fputs_demangled (funname ? funname : "??", stdout, 0);
+ wrap_here (" ");
+ fputs_filtered (" (", stdout);
+ if (args)
+--- 221,230 ----
+ if (addressprint)
+ if (fi->pc != sal.pc || !sal.symtab)
+ printf_filtered ("%s in ", local_hex_string(fi->pc));
+! if (cadillac)
+! cadillac_annotate_function(funname ? funname : "??", 0, level);
+! else
+! fputs_demangled (funname ? funname : "??", stdout, 0);
+ wrap_here (" ");
+ fputs_filtered (" (", stdout);
+ if (args)
+***************
+*** 255,261 ****
+ {
+ if (addressprint && mid_statement)
+ printf_filtered ("%s\t", local_hex_string(fi->pc));
+! print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
+ }
+ current_source_line = max (sal.line - lines_to_list/2, 1);
+ }
+--- 261,268 ----
+ {
+ if (addressprint && mid_statement)
+ printf_filtered ("%s\t", local_hex_string(fi->pc));
+! if (!cadillac)
+! print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
+ }
+ current_source_line = max (sal.line - lines_to_list/2, 1);
+ }
+***************
+*** 429,435 ****
+ if (funname)
+ {
+ printf_filtered (" in ");
+! fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
+ }
+ wrap_here (" ");
+ if (sal.symtab)
+--- 436,446 ----
+ if (funname)
+ {
+ printf_filtered (" in ");
+! if (cadillac)
+! cadillac_annotate_function(funname, DMGL_ANSI | DMGL_PARAMS,
+! selected_frame_level);
+! else
+! fputs_demangled (funname, stdout, DMGL_ANSI | DMGL_PARAMS);
+ }
+ wrap_here (" ");
+ if (sal.symtab)
+diff -rc symfile.c symfile.c
+*** symfile.c Sat Jun 13 09:20:12 1992
+--- symfile.c Sat Jun 27 12:30:06 1992
+***************
+*** 555,560 ****
+--- 555,563 ----
+ fflush (stdout);
+ }
+
++ if (cadillac)
++ cadillac_symbol_file(objfile);
++
+ return (objfile);
+ }
+
+diff -rc utils.c utils.c
+*** utils.c Mon Jun 15 07:27:07 1992
+--- utils.c Sat Jun 27 12:30:07 1992
+***************
+*** 96,101 ****
+--- 96,102 ----
+
+ char *error_pre_print;
+ char *warning_pre_print = "\nwarning: ";
++
+ \f
+ /* Add a new cleanup to the cleanup_chain,
+ and return the previous chain pointer
+***************
+*** 694,700 ****
+ register int ans2;
+
+ /* Automatically answer "yes" if input is not from a terminal. */
+! if (!input_from_terminal_p ())
+ return 1;
+
+ while (1)
+--- 695,701 ----
+ register int ans2;
+
+ /* Automatically answer "yes" if input is not from a terminal. */
+! if (!input_from_terminal_p () && !cadillac)
+ return 1;
+
+ while (1)
+***************
+*** 701,721 ****
+ {
+ va_start (args);
+ ctlstr = va_arg (args, char *);
+ vfprintf_filtered (stdout, ctlstr, args);
+- va_end (args);
+ printf_filtered ("(y or n) ");
+! fflush (stdout);
+! answer = fgetc (stdin);
+! clearerr (stdin); /* in case of C-d */
+! if (answer == EOF) /* C-d */
+! return 1;
+! if (answer != '\n') /* Eat rest of input line, to EOF or newline */
+! do
+! {
+! ans2 = fgetc (stdin);
+! clearerr (stdin);
+! }
+! while (ans2 != EOF && ans2 != '\n');
+ if (answer >= 'a')
+ answer -= 040;
+ if (answer == 'Y')
+--- 702,734 ----
+ {
+ va_start (args);
+ ctlstr = va_arg (args, char *);
++ if (cadillac)
++ cadillac_query (ctlstr, args);
+ vfprintf_filtered (stdout, ctlstr, args);
+ printf_filtered ("(y or n) ");
+! if (cadillac)
+! {
+! char *buf;
+!
+! buf = cadillac_command_line_input();
+! answer = buf ? *buf : 'Y';
+! cadillac_acknowledge_query(buf);
+! }
+! else
+! {
+! fflush (stdout);
+! answer = fgetc (stdin);
+! clearerr (stdin); /* in case of C-d */
+! if (answer == EOF) /* C-d */
+! return 1;
+! if (answer != '\n') /* Eat rest of input line, to EOF or newline */
+! do
+! {
+! ans2 = fgetc (stdin);
+! clearerr (stdin);
+! }
+! while (ans2 != EOF && ans2 != '\n');
+! }
+ if (answer >= 'a')
+ answer -= 040;
+ if (answer == 'Y')
+***************
+*** 723,728 ****
+--- 736,742 ----
+ if (answer == 'N')
+ return 0;
+ printf_filtered ("Please answer y or n.\n");
++ va_end (args);
+ }
+ }
+
+***************
+*** 989,994 ****
+--- 1003,1014 ----
+ if (linebuffer == 0)
+ return;
+
++ if (cadillac)
++ {
++ cadillac_fputs(linebuffer);
++ return;
++ }
++
+ /* Don't do any filtering if it is disabled. */
+ if (stream != stdout
+ || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
+diff -rc valprint.c valprint.c
+*** valprint.c Tue Jun 23 23:24:51 1992
+--- valprint.c Sat Jun 27 12:30:07 1992
+***************
+*** 485,490 ****
+--- 485,491 ----
+ struct type **dont_print;
+ {
+ int i, len, n_baseclasses;
++ char expr_tag[100]; /* Cadillac */
+
+ check_stub_type (type);
+
+***************
+*** 549,554 ****
+--- 550,563 ----
+ fprint_symbol (stream, TYPE_FIELD_NAME (type, i));
+ fputs_filtered (" = ", stream);
+ }
++
++ sprintf(expr_tag, ".%s", TYPE_FIELD_NAME(type, i));
++
++ if (cadillac)
++ cadillac_start_variable_annotation(expr_tag, NULL,
++ TYPE_FIELD_TYPE(type, i),
++ (CORE_ADDR) (valaddr + TYPE_FIELD_BITPOS(type, i) / 8),
++ "");
+ if (TYPE_FIELD_PACKED (type, i))
+ {
+ value v;
+***************
+*** 567,572 ****
+--- 576,583 ----
+ valaddr + TYPE_FIELD_BITPOS (type, i) / 8,
+ 0, stream, format, 0, recurse + 1, pretty);
+ }
++ if (cadillac)
++ cadillac_end_variable_annotation();
+ }
+ if (pretty)
+ {
+***************
+*** 801,806 ****
+--- 812,818 ----
+ unsigned int rep1;
+ /* Number of repetitions we have detected so far. */
+ unsigned int reps;
++ char expr_tag[100]; /* Cadillac */
+
+ if (i != 0)
+ if (arrayprint)
+***************
+*** 822,827 ****
+--- 834,845 ----
+ ++rep1;
+ }
+
++ sprintf(expr_tag, "[%d]", i);
++ if (cadillac)
++ cadillac_start_variable_annotation(expr_tag, NULL,
++ elttype,
++ (CORE_ADDR) (valaddr + i * eltlen),
++ "");
+ if (reps > REPEAT_COUNT_THRESHOLD)
+ {
+ val_print (elttype, valaddr + i * eltlen,
+***************
+*** 838,843 ****
+--- 856,863 ----
+ recurse + 1, pretty);
+ things_printed++;
+ }
++ if (cadillac)
++ cadillac_end_variable_annotation();
+ }
+ if (i < len)
+ fprintf_filtered (stream, "...");
--- /dev/null
+/* Energize (formerly known as Cadillac) interface routines.
+ Copyright 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#include "defs.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "command.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/param.h>
+#include <connection.h>
+#include <genericreq.h>
+#include <debuggerreq.h>
+#include <debuggerconn.h>
+#include <ttyconn.h>
+#include <varargs.h>
+#include <sys/stat.h>
+#ifdef USG
+#include <sys/file.h>
+#endif
+#include <fcntl.h>
+#include <sys/filio.h>
+#include <setjmp.h>
+#include <signal.h>
+#include <sys/errno.h>
+#include <termios.h>
+#include <string.h>
+
+/* Non-zero means that we're doing the energize interface. */
+int energize = 0;
+
+/* Connection block for debugger<=>kernel communications. */
+static Connection *conn = 0;
+
+/* fd for our socket to the kernel. */
+static int kerfd;
+
+/* The kernel's ID for this instance of the program. */
+static int program_id;
+
+static int instance_id;
+
+/* The fd for the pty associated with the inferior. */
+static int inferior_pty = -1;
+static int inferior_tty = -1;
+
+static int has_run = 0;
+
+extern int pgrp_inferior;
+
+extern char *source_path;
+
+char **pprompt; /* Pointer to pointer to prompt */
+
+/* Tell energize_command_line_input() where to get its text from */
+static int doing_breakcommands_message = 0;
+
+/* Stash command text here */
+static char *command_line_text = 0;
+static int command_line_length = 0;
+
+/* Flags returned by wait_for_events() */
+#define KERNEL_EVENT 1
+#define PTY_EVENT 2
+
+\f
+/* This routine redirects the output of fputs_filtered to the kernel so that
+ the user can see what's going on in his debugger window. */
+
+void
+energize_fputs(ptr)
+ const char *ptr;
+{
+ if (conn)
+ CVWriteTranscriptInfo (conn, instance_id, (char *)ptr);
+ else
+ fputs (ptr, stdout);
+}
+
+void
+energize_query(query, args)
+ char *query;
+ va_list args;
+{
+ char buf[100];
+
+ if (!energize)
+ return;
+
+ vsprintf(buf, query, args);
+
+ CVWriteQueryInfo(conn,
+ instance_id,
+ CQueryConfirm,
+ qno_unknown,
+ buf,
+ ""); /* transcript */
+}
+
+void
+energize_acknowledge_query(ack)
+ char *ack;
+{
+ CVWriteQueryInfo(conn,
+ instance_id,
+ CQueryAcknowleged,
+ 0,
+ ack,
+ ""); /* transcript */
+}
+
+/* Copy all data from the pty to the kernel. */
+
+static void
+pty_to_kernel()
+{
+ CTtyRequest *req;
+ char buf[1024];
+ int cc;
+
+ while (1)
+ {
+ cc = read(inferior_pty, buf, sizeof(buf));
+
+ if (cc == 0
+ || (cc < 0
+ && errno == EWOULDBLOCK))
+ break;
+
+ if (cc < 0)
+ {
+ close(inferior_pty);
+ inferior_pty = -1;
+ perror("pty read error");
+ break;
+ }
+
+ req = CWriteTtyRequest(conn, TextIORType);
+ CWriteVstringLen(conn, buf, cc);
+ CWriteLength(conn);
+ }
+ CWriteRequestBuffer(conn);
+}
+
+/* Copy data from the kernel to the pty. */
+
+static void
+kernel_to_pty(data, len)
+ char *data;
+ int len;
+{
+ int cc;
+
+ cc = write(inferior_pty, data, len);
+
+ if (cc != len)
+ {
+ if (cc < 0)
+ {
+ close(inferior_pty);
+ inferior_pty = -1;
+ perror("pty write error");
+ return;
+ }
+ printf("Couldn't write all the data to the pty, wanted %d, got %d\n",
+ len, cc);
+ }
+}
+\f
+static char *
+full_filename(symtab)
+ struct symtab *symtab;
+{
+ int pathlen;
+ char *filename;
+
+ if (!symtab)
+ return NULL;
+
+ if (symtab->fullname)
+ return savestring(symtab->fullname, strlen(symtab->fullname));
+
+ if (symtab->dirname)
+ pathlen = strlen(symtab->dirname);
+ else
+ pathlen = 0;
+ if (symtab->filename)
+ pathlen += strlen(symtab->filename);
+
+ filename = xmalloc(pathlen+1);
+
+ if (symtab->dirname)
+ strcpy(filename, symtab->dirname);
+ else
+ *filename = '\000';
+ if (symtab->filename)
+ strcat(filename, symtab->filename);
+
+ return filename;
+}
+
+/* Tell the energize kernel how high the stack is so that frame numbers (which
+ are relative to the current stack height make sense.
+
+ Calculate the number of frames on the stack, and the number of subroutine
+ invocations that haven't changed since the last call to this routine. The
+ second number is calculated by comparing the PCs of the current stack frames
+ to the PCs of the previous set of stack frames. The screw here is that a
+ subroutine may call several different procedures, which means that the PC
+ in its frame changes, even though you are still in the same subroutine. We
+ resolve this by converting the frames PC into the PC at the start of the
+ function (for efficiency, this is done only if the simple comparison test
+ fails). */
+
+struct pclist
+{
+ CORE_ADDR pc;
+ struct pclist *next;
+};
+
+/* Non-zero means that Energize kernel already knows how high the stack is. */
+static int stack_info_valid = 0;
+
+static void
+send_stack_info()
+{
+ struct pclist *pclist = 0, *pli, *opli;
+ static struct pclist *old_pclist;
+ FRAME frame;
+ int height, similar;
+
+ if (stack_info_valid)
+ return;
+
+ height = 0;
+ similar = 0;
+
+/* First, calculate the stack height, and build the new pclist */
+
+ for (frame = get_current_frame();
+ frame != 0;
+ frame = get_prev_frame(frame))
+ {
+ (height)++;
+ pli = (struct pclist *)xmalloc(sizeof(struct pclist));
+
+ pli->pc = frame->pc;
+ pli->next = pclist;
+ pclist = pli;
+ }
+
+/* Now, figure out how much of the stack hasn't changed */
+
+ for (pli = pclist, opli = old_pclist;
+ pli != 0 && opli != 0;
+ pli = pli->next, opli = opli->next, (similar)++)
+ {
+ if ((pli->pc != opli->pc)
+ && (get_pc_function_start(pli->pc)
+ != get_pc_function_start(opli->pc)))
+ break;
+ }
+
+/* Free up all elements of the old pclist */
+
+ opli = old_pclist;
+
+ while (opli)
+ {
+ pli = opli->next;
+ free (opli);
+ opli = pli;
+ }
+
+ old_pclist = pclist; /* Install the new pclist */
+
+ CVWriteStackSizeInfo(conn,
+ instance_id,
+ height, /* Frame depth */
+ CInnerFrameIs0,
+ similar, /* Frame diff */
+ "" /* Transcript */
+ );
+
+ stack_info_valid = 1;
+}
+
+/* Tell the kernel where we are in the program, and what the stack looks like.
+ */
+
+static void
+send_status()
+{
+ static int linecount = 48;
+ struct symtab_and_line sal;
+ struct symbol *symbol;
+ char *funcname, *filename;
+ static int sent_prog_inst = 0;
+
+ if (!has_run)
+ return;
+
+ if (inferior_pid == 0) /* target has died */
+ {
+ CVWriteProgramTerminatedInfo(conn,
+ instance_id,
+ ""
+ );
+ return;
+ }
+
+ sal = find_pc_line(stop_pc, 0);
+ symbol = find_pc_function(stop_pc);
+
+ funcname = symbol ? symbol->name : "";
+ filename = full_filename(sal.symtab);
+
+ if (!sent_prog_inst)
+ {
+ sent_prog_inst = 1;
+ CVWriteProgramInstanceInfo(conn,
+ program_id,
+ instance_id,
+ "", /* hostname */
+ "", /* arglist */
+ ""
+ );
+ }
+
+ send_stack_info();
+
+ CVWriteStackFrameInfo(conn,
+ instance_id,
+ sal.line,
+ CFileLinePos,
+ 0, /* XXX - frame # */
+ funcname,
+ filename,
+ "" /* XXX ? transcript */
+ );
+
+ CVWriteProgramStoppedInfo(conn,
+ instance_id,
+ 0, /* XXX - breakpoint # or signal # */
+ CDebuggerCommand,
+ funcname,
+ "" /* XXX ? transcript */
+ );
+
+ if (filename)
+ free(filename);
+}
+
+/* Call this to output annotated function names. Names will be demangled if
+ necessary. arg_mode contains flags that are passed on to cplus_demangle. */
+
+void
+energize_annotate_function(funcname, arg_mode, level)
+ char *funcname;
+ int arg_mode;
+ int level;
+{
+ extern int demangle;
+ char *demangled_name = NULL;
+
+ if (funcname == NULL)
+ return;
+
+ if (demangle)
+ {
+ demangled_name = cplus_demangle(funcname, arg_mode);
+
+ if (demangled_name)
+ funcname = demangled_name;
+ }
+
+ send_stack_info();
+
+ if (level < 0) level = 0;
+
+ CVWriteBackTraceEntryInfo(conn,
+ instance_id,
+ level, /* frameNo */
+ funcname);
+
+ if (demangled_name)
+ free(demangled_name);
+}
+
+/* Call this just prior to printing out the name & value of a variable. This
+ tells the kernel where to annotate the output. */
+
+/* The args are:
+ expression - A text handle on what GDB can use to reference this value.
+ This can be a symbol name, or a convenience var, etc...
+ symbol - Used to determine the scope of the data. May be NULL.
+ type - Determines if we have a pointer ref, and the print name of the type.
+ Used in ShowValue message.
+ valaddr - The address in target memory of the data.
+ field - The field name of the struct or union element being referenced.
+*/
+
+static char cum_expr[200]; /* Cumulative expression */
+static char *expr_stack[100] = {cum_expr}; /* Pointers to end of expressions */
+static char **last_expr = expr_stack; /* Current expr stack pointer */
+
+void
+energize_start_variable_annotation(expression, symbol, type, valaddr, field)
+ char *expression;
+ struct symbol *symbol;
+ struct type *type;
+ CORE_ADDR valaddr;
+ char *field;
+{
+ int ref_type;
+ int stor_cl;
+ enum type_code type_code;
+ enum address_class sym_class;
+ char *type_cast;
+
+ if (!energize)
+ return;
+
+ send_stack_info();
+
+ strcpy(*last_expr++, expression);
+ *last_expr = *(last_expr-1) + strlen(expression);
+
+ switch (TYPE_CODE(type))
+ {
+ case TYPE_CODE_ARRAY:
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_INT:
+ case TYPE_CODE_FLT:
+ ref_type = CValueValueRef;
+ break;
+ case TYPE_CODE_PTR:
+ ref_type = CValuePointerRef;
+ break;
+ default:
+ ref_type = CValueUndefRef;
+ break;
+ }
+
+/* Make sure that pointer points at something we understand */
+
+ if (ref_type == CValuePointerRef)
+ switch (TYPE_CODE(TYPE_TARGET_TYPE(type)))
+ {
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_ARRAY:
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_INT:
+ case TYPE_CODE_FLT:
+ break;
+ default:
+ ref_type = CValueUndefRef;
+ break;
+ }
+
+ if (symbol)
+ {
+ sym_class = SYMBOL_CLASS(symbol);
+
+ switch (sym_class)
+ {
+ case LOC_CONST:
+ case LOC_CONST_BYTES:
+ stor_cl = CValueStorStaticConst;
+ break;
+ case LOC_STATIC:
+ stor_cl = CValueStorStaticVar;
+ break;
+ case LOC_REGISTER:
+ case LOC_REGPARM:
+ stor_cl = CValueStorRegister;
+ break;
+ case LOC_ARG:
+ case LOC_REF_ARG:
+ case LOC_LOCAL:
+ case LOC_LOCAL_ARG:
+ stor_cl = CValueStorLocalVar;
+ break;
+ default:
+ stor_cl = CValueStorUndef;
+ break;
+ }
+ }
+ else
+ stor_cl = CValueStorUndef;
+
+ type_cast = TYPE_NAME(type);
+
+ CVWriteValueBeginInfo(conn,
+ instance_id,
+ valaddr,
+ ref_type,
+ stor_cl,
+ 0, /* XXX - frameno */
+ cum_expr,
+ field,
+ type_cast,
+ ""); /* transcript */
+}
+
+void
+energize_end_variable_annotation()
+{
+ if (!energize)
+ return;
+
+ last_expr--; /* Pop the expr stack */
+ **last_expr = '\000'; /* Cut off the last part of the expr */
+
+ CVWriteValueEndInfo(conn,
+ instance_id,
+ ""); /* transcript */
+}
+\f
+/* Tell the kernel that the target is now running. */
+
+static void
+go_busy()
+{
+ CVWriteProgramBusyInfo(conn,
+ instance_id,
+ ""); /* XXX ? transcript */
+ CWriteRequestBuffer(conn); /* Must take place synchronusly! */
+ stack_info_valid = 0;
+}
+
+\f
+void
+energize_symbol_file(objfile)
+ struct objfile *objfile;
+{
+ if (!energize)
+ return;
+
+ CVWriteSymbolTableInfo(conn,
+ objfile->name,
+ ""); /* Transcript */
+}
+
+/* execute_command_1(echo, queue, cmd, args) - echo - non-zero means echo the
+ command. queue - non-zero means don't execute it now, just save it away for
+ later. cmd - string containing printf control sequences. args - list of
+ arguments needed by those control sequences.
+ */
+
+/* Linked list of queued up commands */
+static struct command_line *queued_commands = 0;
+static struct command_line *last_queued_command = 0;
+
+/* Call this routine to save a command for later. The command string is
+ copied into freshly malloc'ed memory. */
+
+static void
+queue_command(cmd)
+ char *cmd;
+{
+ char *buf;
+ struct command_line *cl;
+ unsigned long s;
+
+ s = (strlen(cmd) + 1) + 7 & ~(unsigned long)7;
+
+ buf = (char *)xmalloc(s + sizeof(struct command_line));
+ cl = (struct command_line *)(buf + s);
+ cl->next = 0;
+ cl->line = buf;
+
+ strncpy(cl->line, cmd, s);
+
+ if (queued_commands)
+ last_queued_command->next = cl;
+ else
+ queued_commands = cl;
+
+ last_queued_command = cl;
+}
+
+/* Call this procedure to take a command off of the command queue. It returns
+ a pointer to a buf which the caller is responsible for freeing. NULL is
+ returned if there are no commands queued. */
+
+static char *
+dequeue_command()
+{
+ struct command_line *cl;
+ char *cmd;
+
+ cl = queued_commands;
+
+ if (!cl)
+ return NULL;
+
+ queued_commands = cl->next;
+
+ return cl->line;
+}
+
+static void
+execute_command_1(va_alist)
+ va_dcl
+{
+ char buf[100]; /* XXX - make buf dynamic! */
+
+ int echo;
+ int queue;
+ char *cmd;
+ va_list args;
+
+ va_start(args);
+
+ echo = va_arg(args, int);
+ queue = va_arg(args, int);
+ cmd = va_arg(args, char *);
+
+ vsprintf(buf, cmd, args);
+
+ if (queue)
+ queue_command(buf);
+ else
+ {
+ if (echo)
+ printf_filtered("%s\n", buf);
+ execute_command(buf, 1);
+ }
+
+ va_end(args);
+}
+
+#ifdef KERNEL_RECORD
+FILE *kerout;
+
+static int
+kernel_record(fd, ptr, num)
+ int fd, num;
+ char *ptr;
+
+{
+ fwrite(ptr, num, 1, kerout);
+ fflush(kerout);
+ return write(fd, ptr, num);
+}
+#endif
+
+void
+energize_condition_breakpoint(b)
+ struct breakpoint *b;
+{
+ if (energize)
+ CVWriteBreakConditionInfo(conn,
+ instance_id,
+ b->number,
+ b->cond_string ? b->cond_string : "",
+ "" /* transcript */
+ );
+}
+
+void
+energize_commands_breakpoint(b)
+ struct breakpoint *b;
+{
+ struct command_line *l;
+
+ if (!energize)
+ return;
+
+ CVWriteBreakCommandBegInfo(conn,
+ instance_id,
+ b->number,
+ ""); /* transcript */
+
+ for (l = b->commands; l; l = l->next)
+ CVWriteBreakCommandEntryInfo(conn,
+ instance_id,
+ l->line,
+ ""); /* transcript */
+
+ CVWriteBreakCommandEndInfo(conn,
+ instance_id,
+ ""); /* transcript */
+}
+
+static void
+breakpoint_notify(b, action)
+ struct breakpoint *b;
+ int action;
+{
+ struct symbol *sym;
+ char *funcname = "";
+ char *filename;
+ char *included_in_filename = "";
+
+ if (!energize)
+ return;
+
+ if (b->type != bp_breakpoint)
+ return;
+
+ filename = full_filename(b->symtab);
+
+ sym = find_pc_function(b->address);
+ if (sym)
+ funcname = SYMBOL_NAME(sym);
+
+ CVWriteBreakpointInfo (conn,
+ instance_id,
+ b->number,
+ b->line_number,
+ CFileLinePos,
+ CBreakOnInstrAccess,
+ action,
+ b->ignore_count,
+ funcname,
+ filename ? filename : "",
+ "", /* included_in_filename */
+ "" /* transcript */
+ );
+
+ if (b->commands)
+ energize_commands_breakpoint(b);
+
+ energize_condition_breakpoint(b);
+
+ if (filename)
+ free(filename);
+}
+
+void
+energize_create_breakpoint(b)
+ struct breakpoint *b;
+{
+ breakpoint_notify(b, CEnableBreakpoint);
+}
+
+void
+energize_delete_breakpoint(b)
+ struct breakpoint *b;
+{
+ breakpoint_notify(b, CDeleteBreakpoint);
+}
+
+void
+energize_enable_breakpoint(b)
+ struct breakpoint *b;
+{
+ breakpoint_notify(b, CEnableBreakpoint);
+}
+
+void
+energize_disable_breakpoint(b)
+ struct breakpoint *b;
+{
+ breakpoint_notify(b, CDisableBreakpoint);
+}
+
+void
+energize_ignore_breakpoint(b)
+ struct breakpoint *b;
+{
+ breakpoint_notify(b, CBreakAttrUnchanged);
+}
+\f
+/* Open up a pty and its associated tty. Return the fd of the tty. */
+
+static void
+getpty()
+{
+ int n, ptyfd, ttyfd;
+ static char dev[30];
+ struct stat statbuf;
+ struct termios termios;
+
+#define HIGHPTY (('z' - 'p') * 16 - 1)
+
+ for (n = 0; n <= HIGHPTY; n++)
+ {
+ sprintf(dev, "/dev/pty%c%x", n/16 + 'p', n%16);
+ if (stat(dev, &statbuf))
+ break;
+ ptyfd = open(dev, O_RDWR);
+ if (ptyfd < 0)
+ continue;
+ sprintf(dev, "/dev/tty%c%x", n/16 + 'p', n%16);
+ ttyfd = open(dev, O_RDWR);
+ if (ttyfd < 0) {close(ptyfd); continue;}
+
+ /* Setup pty for non-blocking I/O. Also make it give us a SIGIO when
+ there's data available. */
+
+ n = fcntl(ptyfd, F_GETFL, 0);
+ fcntl(ptyfd, F_SETFL, n|FNDELAY|FASYNC);
+ fcntl(ptyfd, F_SETOWN, getpid());
+
+ tcgetattr(ttyfd, &termios);
+ termios.c_oflag &= ~OPOST; /* No post-processing */
+ tcsetattr(ttyfd, TCSANOW, &termios);
+
+ inferior_pty = ptyfd;
+ inferior_tty = ttyfd;
+ return;
+ }
+
+ error ("getpty: can't get a pty\n");
+}
+\f
+/* Examine a protocol packet from the driver. */
+
+static void
+kernel_dispatch(queue)
+ int queue; /* Non-zero means we should just queue up
+ commands. */
+{
+ register CHeader *head;
+
+ head = (CHeader *)CPeekNextRequest (conn);
+ if (head == NULL)
+ {
+ fprintf (stderr, "EOF on kernel read!\n");
+ exit (1);
+ }
+
+ if (head->reqType < LastTtyRequestRType)
+ {
+ CTtyRequest* req = CReadTtyRequest (conn);
+ switch (req->head.reqType)
+ {
+ case AcceptConnectionRType:
+ /* Tell the rest of the world that energize is now set up */
+ CSkipRequest (conn);
+ break;
+
+ case RefuseConnectionRType:
+ fprintf (stderr, "Debugger connection refused\n");
+ exit (1);
+
+ case KillProgramRType:
+ exit (0);
+
+ case TextIORType:
+ {
+ char *p;
+ ReqLen len;
+
+ p = CGetVstring(conn, &len);
+ kernel_to_pty(p, len);
+ }
+ break;
+ default:
+ fprintf(stderr, "Unknown request type = %d\n",
+ req->head.reqType);
+ break;
+ }
+ }
+ else
+ {
+ CVDebuggerRequest *req = CVReadDebuggerRequest (conn);
+ if (!req)
+ {
+ fprintf (stderr, "CVReadDebuggerRequest returned NULL, type = %d\n",
+ head->reqType);
+ exit(1);
+ }
+
+ switch (req->head.request->reqType)
+ {
+ case OpenProgramInstanceRType:
+ {
+ char *arglist, buf[100]; /* XXX - Make buf dynamic! */
+ int arglen;
+ /* XXX - should notice when program_id changes */
+ arglist = req->openProgramInstance.progArglist.text;
+ arglen = req->openProgramInstance.progArglist.byteLen;
+
+ execute_command_1(1, queue, "break main");
+ execute_command_1(1, queue, "enable delete $bpnum");
+ if (arglist)
+ {
+ execute_command_1(1, queue, "set args %.*s", arglen, arglist);
+ }
+ execute_command_1(1, queue, "run");
+ }
+ break;
+ case SearchPathRType:
+ directory_command(req->searchPath.searchPath.text, 0);
+ break;
+ case QuitDebuggerRType:
+ execute_command_1(1, queue, "quit");
+ break;
+ case RunRType:
+ if (req->run.request->useArglist == CNewArglist)
+ {
+ execute_command_1(1, queue, "set args %.*s",
+ req->run.progArglist.byteLen,
+ req->run.progArglist.text);
+ }
+ execute_command_1(1, queue, "run");
+ break;
+ case ContinueRType:
+ execute_command_1(1, queue, "continue");
+ break;
+ case StepRType:
+ execute_command_1(1, queue, "step %d", req->step.request->stepCount);
+ break;
+ case NextRType:
+ execute_command_1(1, queue, "next %d", req->next.request->nextCount);
+ break;
+ case ChangeStackFrameRType:
+ switch (req->changeStackFrame.request->frameMovement)
+ {
+ case CToCurrentStackFrame:
+ execute_command_1(1, queue, "frame %d",
+ req->changeStackFrame.request->frameNo);
+ break;
+ case CToInnerStackFrame:
+ execute_command_1(1, queue, "down %d",
+ req->changeStackFrame.request->frameNo);
+ break;
+ case CToOuterStackFrame:
+ execute_command_1(1, queue, "up %d",
+ req->changeStackFrame.request->frameNo);
+ break;
+ case CToAbsoluteStackFrame:
+ execute_command_1(1, queue, "frame %d",
+ req->changeStackFrame.request->frameNo);
+ break;
+ }
+ break;
+ case BackTraceRType:
+ /* XXX - deal with limit??? */
+ execute_command_1(1, queue, "backtrace");
+ break;
+ case FinishRType:
+ execute_command_1(1, queue, "finish");
+ break;
+ case TerminateProgramRType:
+ execute_command_1(1, queue, "kill");
+ break;
+ case NewBreakpointRType:
+ {
+ char *tail;
+ int skipped;
+
+ tail = strrchr(req->newBreakpoint.fileName.text, '/');
+ if (!tail)
+ tail = req->newBreakpoint.fileName.text;
+ else
+ tail++;
+ skipped = tail - req->newBreakpoint.fileName.text;
+ execute_command_1(1, queue, "break %.*s:%d",
+ req->newBreakpoint.fileName.byteLen - skipped,
+ tail,
+ req->newBreakpoint.request->fileLinePos);
+ }
+ break;
+ case StopRType:
+ killpg(pgrp_inferior, SIGINT);
+ break;
+ case UserInputRType:
+ {
+ char *text;
+ long len;
+
+ /* XXX - should really break command up into seperate lines
+ and spoon-feed it to execute_command */
+
+ text = req->userInput.userInput.text;
+ len = req->userInput.userInput.byteLen;
+
+ if (text[len-1] == '\n') text[len-1] = '\000';
+
+ while (*text == ' ' || *text == '\t') text++;
+
+ if (strcmp(text, "]*[") == 0) /* XXX - What does this mean??? */
+ break;
+
+ if (*text != '\000')
+ execute_command_1(0, queue, "%s", text);
+ else
+ print_prompt(); /* User just typed a blank line */
+ }
+ break;
+ case QueryResponseRType:
+ {
+ char *resp;
+
+ if (req->queryResponse.request->response)
+ resp = "y";
+ else
+ resp = "n";
+ execute_command_1(1, 1, resp);
+ printf_filtered("%s\n", resp);
+ }
+ break;
+ case ChangeBreakpointRType:
+ switch (req->changeBreakpoint.request->breakpointAttr)
+ {
+ case CBreakAttrUnchanged:
+ execute_command_1(1, queue, "ignore %d %d",
+ req->changeBreakpoint.request->breakpointId,
+ req->changeBreakpoint.request->ignoreCount);
+ break;
+ case CEnableBreakpoint:
+ execute_command_1(1, queue, "enable %d",
+ req->changeBreakpoint.request->breakpointId);
+ break;
+ case CDisableBreakpoint:
+ execute_command_1(1, queue, "disable %d",
+ req->changeBreakpoint.request->breakpointId);
+ break;
+ case CDeleteBreakpoint:
+ execute_command_1(1, queue, "delete %d",
+ req->changeBreakpoint.request->breakpointId);
+ break;
+ case CEnableDisableBreakpoint:
+ execute_command_1(1, queue, "enable once %d",
+ req->changeBreakpoint.request->breakpointId);
+ break;
+ case CEnableDeleteBreakpoint:
+ execute_command_1(1, queue, "enable delete %d",
+ req->changeBreakpoint.request->breakpointId);
+ break;
+ default:
+ printf_filtered("ChangeBreakpointRType: unknown breakpointAttr\n");
+ printf_filtered(" breakpointAttr = %d\n",
+ req->changeBreakpoint.request->breakpointAttr);
+ printf_filtered(" breakpointId = %d\n",
+ req->changeBreakpoint.request->breakpointId);
+ printf_filtered(" breakpointType = %d\n",
+ req->changeBreakpoint.request->breakpointType);
+ printf_filtered(" ignoreCount = %d\n",
+ req->changeBreakpoint.request->ignoreCount);
+ break;
+ }
+ break;
+ case BreakConditionRType:
+ execute_command_1(1, queue, "condition %d %.*s",
+ req->breakCondition.request->breakpointId,
+ req->breakCondition.condition.byteLen,
+ req->breakCondition.condition.text);
+ break;
+ case BreakCommandsRType:
+ /* Put pointers to where energize_command_line_input() can find
+ them. */
+ doing_breakcommands_message = 1;
+ command_line_length = req->breakCommands.commands.byteLen;
+ command_line_text = req->breakCommands.commands.text;
+ execute_command_1(1, queue, "commands %d",
+ req->breakCommands.request->breakpointId);
+ command_line_text = (char *)NULL;
+ command_line_length = 0;
+ doing_breakcommands_message = 0;
+ break;
+ case ShowValueRType:
+ {
+ char expr[100], *p = expr;
+
+ expr[0] = 0;
+
+ if (req->showValue.request->ref_type == CValuePointerRef)
+ strcat(expr, "* ");
+
+ if (req->showValue.type_cast.byteLen)
+ {
+ strcat(expr, "(");
+ strncat(expr, req->showValue.type_cast.text,
+ req->showValue.type_cast.byteLen);
+ strcat(expr, ") ");
+ }
+
+ if (req->showValue.field.byteLen)
+ strcat(expr, "(");
+
+ strncat(expr, req->showValue.expression.text,
+ req->showValue.expression.byteLen);
+
+ if (req->showValue.field.byteLen)
+ {
+ strcat(expr, ")");
+
+ strncat(expr, req->showValue.field.text,
+ req->showValue.field.byteLen);
+ }
+
+ execute_command_1(1, queue, "print %s", expr);
+ }
+ break;
+ case SetValueRType:
+ {
+ char expr[100], *p = expr;
+
+ expr[0] = 0;
+
+ if (req->setValue.request->ref_type == CValuePointerRef)
+ strcat(expr, "* ");
+
+#if 0
+ if (req->setValue.type_cast.byteLen)
+ {
+ strcat(expr, "(");
+ strncat(expr, req->setValue.type_cast.text,
+ req->setValue.type_cast.byteLen);
+ strcat(expr, ") ");
+ }
+#endif
+ if (req->setValue.field.byteLen)
+ strcat(expr, "(");
+
+ strncat(expr, req->setValue.expression.text,
+ req->setValue.expression.byteLen);
+
+ if (req->setValue.field.byteLen)
+ {
+ strcat(expr, ")");
+
+ strncat(expr, req->setValue.field.text,
+ req->setValue.field.byteLen);
+ }
+
+ execute_command_1(1, queue, "print %s = (%s) %s", expr,
+ req->setValue.type_cast.text,
+ req->setValue.value.text);
+ }
+ break;
+ default:
+ fprintf(stderr, "Unknown request type = %d\n",
+ req->head.request->reqType);
+ break;
+ }
+ free (req); /* Should probably call CVFreeDebuggerRequest() here, but
+ can't do so if interrupt level has mucked with req->
+ request. CVFreeDebuggerRequest() only ends up calling
+ free() anyway! */
+ }
+}
+\f
+/* Return a bitmask indicating if the kernel or the pty did something
+ interesting. Set poll to non-zero if you don't want to wait. */
+
+static int
+wait_for_events(poll)
+ int poll;
+{
+ fd_set readfds;
+ int numfds;
+ int eventmask = 0;
+ static struct timeval tv = {0};
+
+ /* Output all pending requests. */
+ CWriteRequestBuffer(conn);
+
+ FD_ZERO(&readfds);
+
+ /* Wait till there's some activity from the kernel or the pty. */
+ do
+ {
+ FD_SET(kerfd, &readfds);
+ if (inferior_pty > 0)
+ FD_SET(inferior_pty, &readfds);
+ if (poll)
+ numfds = select(sizeof(readfds)*8, &readfds, 0, 0, &tv);
+ else
+ numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
+ }
+ while (numfds <= 0 && !poll);
+
+ if (FD_ISSET(inferior_pty, &readfds))
+ eventmask |= PTY_EVENT;
+
+ if (FD_ISSET(kerfd, &readfds))
+ eventmask |= KERNEL_EVENT;
+
+ return eventmask;
+}
+\f
+/* This is called from read_command_lines() to provide the text for breakpoint
+ commands, which is supplied in a BreakCommands message. Each call to this
+ routine supplies a single line of text, with the newline removed. */
+
+/* This routine may be invoked in two different contexts. In the first, it
+ is being called as a result of the BreakCommands message. In this case,
+ all of the command text is immediately available. In the second case, it is
+ called as a result of the user typing the 'command' command. The command
+ text then needs to be glommed out of UserInput messages (and possibly other
+ messages as well). The most 'straighforward' way of doing this is to
+ basically simulate the main loop, but just accumulate the command text
+ instead of sending it to execute_command(). */
+
+char *
+energize_command_line_input(prompt, repeat)
+ char *prompt;
+ int repeat;
+{
+ char *p;
+
+ if (!energize)
+ return command_line_input(prompt, repeat);
+
+ if (doing_breakcommands_message)
+ {
+ if (command_line_length <= 0)
+ return (char *)NULL;
+
+ p = command_line_text;
+
+ while (command_line_length-- > 0)
+ {
+ if (*command_line_text == '\n')
+ {
+ *command_line_text = '\000';
+ command_line_text++;
+ break;
+ }
+ command_line_text++;
+ }
+
+ printf_filtered("%s\n", p);
+ return p;
+ }
+ else
+ {
+ /* We come here when the user has typed the 'command' or 'define' command
+ to the GDB window. We are basically deep inside of the 'command'
+ command processing routine right now, and will be called to get a new
+ line of input. We expect that kernel_dispatch will queue up only one
+ command at a time. */
+
+ int eventmask;
+ static char buf[100];
+
+ eventmask = wait_for_events(0);
+
+ if (eventmask & PTY_EVENT)
+ pty_to_kernel();
+
+ if (eventmask & KERNEL_EVENT)
+ kernel_dispatch(1); /* Queue up commands */
+
+/* Note that command has been echoed by the time we get here */
+
+ p = dequeue_command();
+
+ if (p)
+ {
+ strncpy(buf, p, sizeof(buf));
+ free(p);
+ return buf;
+ }
+ else
+ return NULL;
+ }
+}
+\f
+/* Establish contact with the kernel. */
+
+void
+energize_initialize(energize_id, execarg)
+ char *energize_id;
+ char *execarg;
+{
+ CTtyRequest *req;
+ char *ctmp;
+ extern long strtol(char *str, char **ptr, int base);
+ char pathname[MAXPATHLEN];
+ int n;
+
+ if (!energize_id)
+ return;
+
+ if (!execarg) execarg = "";
+
+ printf("\ngdb-debugger pid=%d\n", getpid()); /* XXX - debugging only */
+
+ /* First establish the connection with the kernel. */
+
+ kerfd = COpenClientSocket(NULL);
+ if (kerfd < 0) {
+ printf("COpenClientSocket() failed\n");
+ exit(1);
+ }
+
+ /* Setup for I/O interrupts when appropriate. */
+
+ n = fcntl(kerfd, F_GETFL, 0);
+ fcntl(kerfd, F_SETFL, n|FASYNC);
+ fcntl(kerfd, F_SETOWN, getpid());
+
+ /* Setup connection buffering. */
+
+ CSetSocketBufferSize (kerfd, 12000);
+
+ /* Generate a new connection control block. */
+
+ conn = NewConnection (0, kerfd, kerfd);
+ if (!conn) {
+ printf("NewConnection() failed\n");
+ exit(1);
+ }
+
+#ifdef KERNEL_RECORD
+ kerout = fopen("kernel.output", "+w");
+
+ CReadWriteHooks(conn, conn->previewMethod, conn->readMethod, kernel_record);
+#endif
+
+ /* Tell the kernel that we are the "debugger". */
+
+ req = CWriteTtyRequest (conn, QueryConnectionRType);
+ req->generic.queryconnection.major = 0;
+ req->generic.queryconnection.minor = 0;
+ req->generic.queryconnection.cadillacId1=strtol(energize_id, &ctmp, 16);
+ req->generic.queryconnection.cadillacId2 = strtol(++ctmp, NULL, 16);
+ req->generic.queryconnection.nProtocols = 1;
+ CWriteProtocol (conn, 0, 0, "debugger");
+ CWriteLength (conn);
+
+ /* Tell the kernel that we are actually running. */
+
+ /* KROCK ALERT!!! The kernel doesn't really care about the arguments to
+ the program at all! It only cares that argument 7 be the name of the
+ target program. So, we just fill in the rest of the slots with
+ padding. I hope the kernel never cares about this! */
+
+ req = CWriteTtyRequest (conn, RunningProgramRType);
+ req->runningprogram.argc = 8;
+ getwd (pathname);
+ CWriteVstring0 (conn, pathname);
+
+ CWriteVstring0 (conn, "0");
+ CWriteVstring0 (conn, "1");
+ CWriteVstring0 (conn, "2");
+ CWriteVstring0 (conn, "3");
+ CWriteVstring0 (conn, "4");
+ CWriteVstring0 (conn, "5");
+ CWriteVstring0 (conn, "6");
+ CWriteVstring0 (conn, execarg);
+ CWriteLength (conn);
+
+ /* Tell the kernel our PID and all that */
+
+ program_id = 1;
+ CVWriteDebugProgramInfo(conn,
+ getpid(),
+ program_id,
+ execarg,
+ "");
+
+ /* Tell the rest of the world that Energize is now set up. */
+ energize = 1;
+
+ setsid(); /* Drop controlling tty, become pgrp master */
+ getpty(); /* Setup the pty */
+ dup2(inferior_tty, 0); /* Attach all GDB I/O to the pty */
+ dup2(inferior_tty, 1);
+ dup2(inferior_tty, 2);
+}
+
+/* This is called from execute_command, and provides a wrapper around
+ various command routines in a place where both protocol messages and
+ user input both flow through.
+*/
+
+void
+energize_call_command(cmdblk, arg, from_tty)
+ struct cmd_list_element *cmdblk;
+ char *arg;
+ int from_tty;
+{
+ if (!energize)
+ {
+ (*cmdblk->function.cfunc) (arg, from_tty);
+ return;
+ }
+
+ if (cmdblk->class == class_run)
+ {
+ go_busy();
+ has_run = 1;
+ (*cmdblk->function.cfunc)(arg, from_tty);
+ send_status();
+ }
+ else
+ (*cmdblk->function.cfunc)(arg, from_tty);
+
+ print_prompt();
+}
+
+void
+energize_new_process()
+{
+ instance_id = inferior_pid;
+}
+
+static void
+iosig(signo)
+ int signo;
+{
+ while (1)
+ {
+ int eventmask;
+
+ eventmask = wait_for_events(1);
+
+ if (eventmask == 0)
+ return;
+
+ if (eventmask & PTY_EVENT)
+ pty_to_kernel();
+
+ if (eventmask & KERNEL_EVENT)
+ kernel_dispatch(1);
+ }
+}
+
+int
+energize_wait(status)
+ int *status;
+{
+ int pid;
+
+ if (!energize)
+ return wait(status);
+
+ signal(SIGIO, iosig);
+
+ pid = wait(status);
+
+ signal(SIGIO, SIG_DFL);
+ return pid;
+}
+
+static void
+null_routine(arg)
+ int arg;
+{
+}
+
+/* All requests from the Energize kernel eventually end up here. */
+
+void
+energize_main_loop()
+{
+ CTtyRequest *req;
+ struct cleanup *old_chain;
+
+ doing_breakcommands_message = 0;
+
+/* We will come thru here any time there is an error, so send status if
+ necessary. */
+
+ send_status();
+
+ print_prompt();
+
+ /* The actual event loop! */
+
+ while (1)
+ {
+ int eventmask;
+ char *cmd;
+
+ old_chain = make_cleanup(null_routine, 0);
+
+/* First, empty out the command queue, then check for new requests. */
+
+ while (cmd = dequeue_command())
+ {
+ execute_command_1(1, 0, cmd);
+ free(cmd);
+ }
+
+ eventmask = wait_for_events(0);
+
+ if (eventmask & PTY_EVENT)
+ pty_to_kernel();
+
+ if (eventmask & KERNEL_EVENT)
+ kernel_dispatch(0);
+
+ bpstat_do_actions(&stop_bpstat);
+ do_cleanups(old_chain);
+ }
+}
projects / deliverable / binutils-gdb.git / commitdiff
