From: Petr Mladek Date: Fri, 19 Sep 2014 15:32:23 +0000 (+0200) Subject: usb: hub: rename khubd to hub_wq in documentation and comments X-Git-Url: http://git.efficios.com/?a=commitdiff_plain;h=37ebb54915dc42944f6ae92fe53b9531c3903801;p=deliverable%2Flinux.git usb: hub: rename khubd to hub_wq in documentation and comments USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index 85fc0e28576f..4cd5b2cd0f3d 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -593,7 +593,7 @@ for (;;) { Each device has one control endpoint (endpoint zero) which supports a limited RPC style RPC access. Devices are configured - by khubd (in the kernel) setting a device-wide + by hub_wq (in the kernel) setting a device-wide configuration that affects things like power consumption and basic functionality. The endpoints are part of USB interfaces, diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt index 512238c3dc86..fdb47637720e 100644 --- a/Documentation/usb/WUSB-Design-overview.txt +++ b/Documentation/usb/WUSB-Design-overview.txt @@ -308,7 +308,7 @@ HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery into /devconnect/). This process starts the authentication process for the device. First we allocate a /fake port/ and assign an unauthenticated address (128 to 255--what we really do is -0x80 | fake_port_idx). We fiddle with the fake port status and /khubd/ +0x80 | fake_port_idx). We fiddle with the fake port status and /hub_wq/ sees a new connection, so he moves on to enable the fake port with a reset. So now we are in the reset path -- we know we have a non-yet enumerated @@ -317,7 +317,7 @@ device with an unauthorized address; we ask user space to authenticate exchange (FIXME: not yet done) and issue a /set address 0/ to bring the device to the default state. Device is authenticated. -From here, the USB stack takes control through the usb_hcd ops. khubd +From here, the USB stack takes control through the usb_hcd ops. hub_wq has seen the port status changes, as we have been toggling them. It will start enumerating and doing transfers through usb_hcd->urb_enqueue() to read descriptors and move our data. @@ -331,7 +331,7 @@ Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this arrives to us as a notification through devconnect.c:wusb_handle_dn_alive(). If a device times out, we disconnect it from the system (cleaning up internal information and -toggling the bits in the fake hub port, which kicks khubd into removing +toggling the bits in the fake hub port, which kicks hub_wq into removing the rest of the stuff). This is done through devconnect:__wusb_check_devs(), which will scan the diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt index a80b0e9a7a0b..5b243f315b2c 100644 --- a/Documentation/usb/hotplug.txt +++ b/Documentation/usb/hotplug.txt @@ -58,7 +58,7 @@ USB POLICY AGENT The USB subsystem currently invokes /sbin/hotplug when USB devices are added or removed from system. The invocation is done by the kernel -hub daemon thread [khubd], or else as part of root hub initialization +hub workqueue [hub_wq], or else as part of root hub initialization (done by init, modprobe, kapmd, etc). Its single command line parameter is the string "usb", and it passes these environment variables: diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 5173821a9575..20615bbd693b 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -69,8 +69,9 @@ // reawaken network queue this soon after stopping; else watchdog barks #define TX_TIMEOUT_JIFFIES (5*HZ) -// throttle rx/tx briefly after some faults, so khubd might disconnect() -// us (it polls at HZ/4 usually) before we report too many false errors. +/* throttle rx/tx briefly after some faults, so hub_wq might disconnect() + * us (it polls at HZ/4 usually) before we report too many false errors. + */ #define THROTTLE_JIFFIES (HZ/8) // between wakeups @@ -595,9 +596,9 @@ static void rx_complete (struct urb *urb) "rx shutdown, code %d\n", urb_status); goto block; - /* we get controller i/o faults during khubd disconnect() delays. + /* we get controller i/o faults during hub_wq disconnect() delays. * throttle down resubmits, to avoid log floods; just temporarily, - * so we still recover when the fault isn't a khubd delay. + * so we still recover when the fault isn't a hub_wq delay. */ case -EPROTO: case -ETIME: @@ -1185,8 +1186,9 @@ static void tx_complete (struct urb *urb) case -ESHUTDOWN: // hardware gone break; - // like rx, tx gets controller i/o faults during khubd delays - // and so it uses the same throttling mechanism. + /* like rx, tx gets controller i/o faults during hub_wq + * delays and so it uses the same throttling mechanism. + */ case -EPROTO: case -ETIME: case -EILSEQ: diff --git a/drivers/usb/README b/drivers/usb/README index 284f46b3e1cc..2144e7dbfa41 100644 --- a/drivers/usb/README +++ b/drivers/usb/README @@ -24,7 +24,7 @@ Here is a list of what each subdirectory here is, and what is contained in them. core/ - This is for the core USB host code, including the - usbfs files and the hub class driver ("khubd"). + usbfs files and the hub class driver ("hub_wq"). host/ - This is for USB host controller drivers. This includes UHCI, OHCI, EHCI, and others that might diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 761ccf02d7a0..d3fe161bec05 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2301,7 +2301,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); * Context: in_interrupt() * * Starts enumeration, with an immediate reset followed later by - * khubd identifying and possibly configuring the device. + * hub_wq identifying and possibly configuring the device. * This is needed by OTG controller drivers, where it helps meet * HNP protocol timing requirements for starting a port reset. * @@ -2320,7 +2320,7 @@ int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num) if (port_num && hcd->driver->start_port_reset) status = hcd->driver->start_port_reset(hcd, port_num); - /* run khubd shortly after (first) root port reset finishes; + /* allocate hub_wq shortly after (first) root port reset finishes; * it may issue others, until at least 50 msecs have passed. */ if (status == 0) @@ -2383,7 +2383,7 @@ void usb_hc_died (struct usb_hcd *hcd) if (hcd->rh_registered) { clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - /* make khubd clean up old urbs and devices */ + /* make hub_wq clean up old urbs and devices */ usb_set_device_state (hcd->self.root_hub, USB_STATE_NOTATTACHED); usb_kick_hub_wq(hcd->self.root_hub); @@ -2393,7 +2393,7 @@ void usb_hc_died (struct usb_hcd *hcd) if (hcd->rh_registered) { clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - /* make khubd clean up old urbs and devices */ + /* make hub_wq clean up old urbs and devices */ usb_set_device_state(hcd->self.root_hub, USB_STATE_NOTATTACHED); usb_kick_hub_wq(hcd->self.root_hub); @@ -2655,7 +2655,7 @@ int usb_add_hcd(struct usb_hcd *hcd, set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); /* HC is in reset state, but accessible. Now do the one-time init, - * bottom up so that hcds can customize the root hubs before khubd + * bottom up so that hcds can customize the root hubs before hub_wq * starts talking to them. (Note, bus id is assigned early too.) */ if ((retval = hcd_buffer_create(hcd)) != 0) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 9b01ab2bbe7d..12a4c67667b1 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -652,7 +652,7 @@ static void hub_irq(struct urb *urb) hub->error = status; /* FALL THROUGH */ - /* let khubd handle things */ + /* let hub_wq handle things */ case 0: /* we got data: port status changed */ bits = 0; for (i = 0; i < urb->actual_length; ++i) @@ -664,7 +664,7 @@ static void hub_irq(struct urb *urb) hub->nerrors = 0; - /* Something happened, let khubd figure it out */ + /* Something happened, let hub_wq figure it out */ kick_hub_wq(hub); resubmit: @@ -695,7 +695,7 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) } /* - * enumeration blocks khubd for a long time. we use keventd instead, since + * enumeration blocks hub_wq for a long time. we use keventd instead, since * long blocking there is the exception, not the rule. accordingly, HCDs * talking to TTs must queue control transfers (not just bulk and iso), so * both can talk to the same hub concurrently. @@ -961,7 +961,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) /* * Disable a port and mark a logical connect-change event, so that some - * time later khubd will disconnect() any existing usb_device on the port + * time later hub_wq will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. */ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) @@ -974,7 +974,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) * - SRP saves power that way * - ... new call, TBD ... * That's easy if this hub can switch power per-port, and - * khubd reactivates the port later (timer, SRP, etc). + * hub_wq reactivates the port later (timer, SRP, etc). * Powerdown must be optional, because of reset/DFU. */ @@ -987,7 +987,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1) * @udev: device to be disabled and removed * Context: @udev locked, must be able to sleep. * - * After @udev's port has been disabled, khubd is notified and it will + * After @udev's port has been disabled, hub_wq is notified and it will * see that the device has been disconnected. When the device is * physically unplugged and something is plugged in, the events will * be received and processed normally. @@ -1107,7 +1107,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) init2: /* - * Check each port and set hub->change_bits to let khubd know + * Check each port and set hub->change_bits to let hub_wq know * which ports need attention. */ for (port1 = 1; port1 <= hdev->maxchild; ++port1) { @@ -1174,7 +1174,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) clear_bit(port1, hub->removed_bits); if (!udev || udev->state == USB_STATE_NOTATTACHED) { - /* Tell khubd to disconnect the device or + /* Tell hub_wq to disconnect the device or * check for a new connection */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || @@ -1187,7 +1187,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_SS_PORT_LS_U0; /* The power session apparently survived the resume. * If there was an overcurrent or suspend change - * (i.e., remote wakeup request), have khubd + * (i.e., remote wakeup request), have hub_wq * take care of it. Look at the port link state * for USB 3.0 hubs, since they don't have a suspend * change bit, and they don't set the port link change @@ -1208,7 +1208,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) set_bit(port1, hub->change_bits); } else { - /* The power session is gone; tell khubd */ + /* The power session is gone; tell hub_wq */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); set_bit(port1, hub->change_bits); } @@ -1216,10 +1216,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* If no port-status-change flags were set, we don't need any * debouncing. If flags were set we can try to debounce the - * ports all at once right now, instead of letting khubd do them + * ports all at once right now, instead of letting hub_wq do them * one at a time later on. * - * If any port-status changes do occur during this delay, khubd + * If any port-status changes do occur during this delay, hub_wq * will see them later and handle them normally. */ if (need_debounce_delay) { @@ -1280,7 +1280,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) cancel_delayed_work_sync(&hub->init_work); - /* khubd and related activity won't re-trigger */ + /* hub_wq and related activity won't re-trigger */ hub->quiescing = 1; if (type != HUB_SUSPEND) { @@ -1291,7 +1291,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) } } - /* Stop khubd and related activity */ + /* Stop hub_wq and related activity */ usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); @@ -1613,7 +1613,7 @@ static int hub_configure(struct usb_hub *hub, if (ret < 0) goto fail; - /* Update the HCD's internal representation of this hub before khubd + /* Update the HCD's internal representation of this hub before hub_wq * starts getting port status changes for devices under the hub. */ if (hcd->driver->update_hub_device) { @@ -2045,7 +2045,7 @@ static void choose_devnum(struct usb_device *udev) int devnum; struct usb_bus *bus = udev->bus; - /* If khubd ever becomes multithreaded, this will need a lock */ + /* If hub_wq ever becomes multithreaded, this will need a lock */ if (udev->wusb) { devnum = udev->portnum + 1; BUG_ON(test_bit(devnum, bus->devmap.devicemap)); @@ -3074,7 +3074,7 @@ static unsigned wakeup_enabled_descendants(struct usb_device *udev) * Once VBUS drop breaks the circuit, the port it's using has to go through * normal re-enumeration procedures, starting with enabling VBUS power. * Other than re-initializing the hub (plug/unplug, except for root hubs), - * Linux (2.6) currently has NO mechanisms to initiate that: no khubd + * Linux (2.6) currently has NO mechanisms to initiate that: no hub_wq * timer, no SRP, no requests through sysfs. * * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get @@ -3216,7 +3216,7 @@ static int finish_port_resume(struct usb_device *udev) /* usb ch9 identifies four variants of SUSPENDED, based on what * state the device resumes to. Linux currently won't see the * first two on the host side; they'd be inside hub_port_init() - * during many timeouts, but khubd can't suspend until later. + * during many timeouts, but hub_wq can't suspend until later. */ usb_set_device_state(udev, udev->actconfig ? USB_STATE_CONFIGURED @@ -3581,7 +3581,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) dev_dbg(&intf->dev, "%s\n", __func__); - /* stop khubd and related activity */ + /* stop hub_wq and related activity */ hub_quiesce(hub, HUB_SUSPEND); return 0; } @@ -4977,10 +4977,10 @@ static void port_event(struct usb_hub *hub, int port1) * On disconnect USB3 protocol ports transit from U0 to * SS.Inactive to Rx.Detect. If this happens a warm- * reset is not needed, but a (re)connect may happen - * before khubd runs and sees the disconnect, and the + * before hub_wq runs and sees the disconnect, and the * device may be an unknown state. * - * If the port went through SS.Inactive without khubd + * If the port went through SS.Inactive without hub_wq * seeing it the C_LINK_STATE change flag will be set, * and we reset the dev to put it in a known state. */ @@ -5290,7 +5290,7 @@ static int descriptors_changed(struct usb_device *udev, * former operating configuration. If the reset fails, or the device's * descriptors change from their values before the reset, or the original * configuration and altsettings cannot be restored, a flag will be set - * telling khubd to pretend the device has been disconnected and then + * telling hub_wq to pretend the device has been disconnected and then * re-connected. All drivers will be unbound, and the device will be * re-enumerated and probed all over again. * diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index cf2734b532a7..3d84b6a41dae 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -627,7 +627,7 @@ static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port) if (!(status & PORT_CONNECT)) return -ENODEV; - /* khubd will finish the reset later */ + /* hub_wq will finish the reset later */ if (ehci_is_TDI(ehci)) { writel(PORT_RESET | (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)), diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 488a30836c36..15feaf924b71 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -788,7 +788,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) continue; /* start 20 msec resume signaling from this port, - * and make khubd collect PORT_STAT_C_SUSPEND to + * and make hub_wq collect PORT_STAT_C_SUSPEND to * stop that signaling. Use 5 ms extra for safety, * like usb_port_resume() does. */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 6130b7574908..7ccb3ccf8e86 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -656,7 +656,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) /* * Return status information even for ports with OWNER set. - * Otherwise khubd wouldn't see the disconnect event when a + * Otherwise hub_wq wouldn't see the disconnect event when a * high-speed device is switched over to the companion * controller by the user. */ @@ -902,7 +902,7 @@ int ehci_hub_control( /* * Even if OWNER is set, so the port is owned by the - * companion controller, khubd needs to be able to clear + * companion controller, hub_wq needs to be able to clear * the port-change status bits (especially * USB_PORT_STAT_C_CONNECTION). */ @@ -1000,7 +1000,7 @@ int ehci_hub_control( * However, not all EHCI implementations do this * automatically, even if they _do_ support per-port * power switching; they're allowed to just limit the - * current. khubd will turn the power back on. + * current. hub_wq will turn the power back on. */ if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle)) && HCS_PPC(ehci->hcs_params)) { @@ -1085,7 +1085,7 @@ int ehci_hub_control( } /* - * Even if OWNER is set, there's no harm letting khubd + * Even if OWNER is set, there's no harm letting hub_wq * see the wPortStatus values (they should all be 0 except * for PORT_POWER anyway). */ diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 1cf68eaf2ed8..a1a1ef521436 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -360,12 +360,12 @@ static int fhci_start(struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; /* - * From here on, khubd concurrently accesses the root + * From here on, hub_wq concurrently accesses the root * hub; drivers will be talking to enumerated devices. - * (On restart paths, khubd already knows about the root + * (On restart paths, hub_wq already knows about the root * hub and could find work as soon as we wrote FLAG_CF.) * - * Before this point the HC was idle/ready. After, khubd + * Before this point the HC was idle/ready. After, hub_wq * and device drivers may start it running. */ fhci_usb_enable(fhci); diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index adcd2050dced..3de1278677d0 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1483,7 +1483,7 @@ fotg210_hub_status_data(struct usb_hcd *hcd, char *buf) /* * Return status information even for ports with OWNER set. - * Otherwise khubd wouldn't see the disconnect event when a + * Otherwise hub_wq wouldn't see the disconnect event when a * high-speed device is switched over to the companion * controller by the user. */ @@ -1572,7 +1572,7 @@ static int fotg210_hub_control( /* * Even if OWNER is set, so the port is owned by the - * companion controller, khubd needs to be able to clear + * companion controller, hub_wq needs to be able to clear * the port-change status bits (especially * USB_PORT_STAT_C_CONNECTION). */ @@ -1723,7 +1723,7 @@ static int fotg210_hub_control( } /* - * Even if OWNER is set, there's no harm letting khubd + * Even if OWNER is set, there's no harm letting hub_wq * see the wPortStatus values (they should all be 0 except * for PORT_POWER anyway). */ @@ -5445,7 +5445,7 @@ static irqreturn_t fotg210_irq(struct usb_hcd *hcd) fotg210->reset_done[0] == 0) { /* start 20 msec resume signaling from this port, - * and make khubd collect PORT_STAT_C_SUSPEND to + * and make hub_wq collect PORT_STAT_C_SUSPEND to * stop that signaling. Use 5 ms extra for safety, * like usb_port_resume() does. */ diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c index ba9499060f63..abe42f31559f 100644 --- a/drivers/usb/host/fusbh200-hcd.c +++ b/drivers/usb/host/fusbh200-hcd.c @@ -1441,7 +1441,7 @@ fusbh200_hub_status_data (struct usb_hcd *hcd, char *buf) /* * Return status information even for ports with OWNER set. - * Otherwise khubd wouldn't see the disconnect event when a + * Otherwise hub_wq wouldn't see the disconnect event when a * high-speed device is switched over to the companion * controller by the user. */ @@ -1530,7 +1530,7 @@ static int fusbh200_hub_control ( /* * Even if OWNER is set, so the port is owned by the - * companion controller, khubd needs to be able to clear + * companion controller, hub_wq needs to be able to clear * the port-change status bits (especially * USB_PORT_STAT_C_CONNECTION). */ @@ -1678,7 +1678,7 @@ static int fusbh200_hub_control ( } /* - * Even if OWNER is set, there's no harm letting khubd + * Even if OWNER is set, there's no harm letting hub_wq * see the wPortStatus values (they should all be 0 except * for PORT_POWER anyway). */ @@ -5355,7 +5355,7 @@ static irqreturn_t fusbh200_irq (struct usb_hcd *hcd) fusbh200->reset_done[0] == 0) { /* start 20 msec resume signaling from this port, - * and make khubd collect PORT_STAT_C_SUSPEND to + * and make hub_wq collect PORT_STAT_C_SUSPEND to * stop that signaling. Use 5 ms extra for safety, * like usb_port_resume() does. */ diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 51a0ae9cdd1d..e752c3098f38 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1760,7 +1760,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) /* * Return status information even for ports with OWNER set. - * Otherwise khubd wouldn't see the disconnect event when a + * Otherwise hub_wq wouldn't see the disconnect event when a * high-speed device is switched over to the companion * controller by the user. */ @@ -1871,7 +1871,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* * Even if OWNER is set, so the port is owned by the - * companion controller, khubd needs to be able to clear + * companion controller, hub_wq needs to be able to clear * the port-change status bits (especially * USB_PORT_STAT_C_CONNECTION). */ @@ -2000,7 +2000,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, reg_read32(hcd->regs, HC_PORTSC1)); } /* - * Even if OWNER is set, there's no harm letting khubd + * Even if OWNER is set, there's no harm letting hub_wq * see the wPortStatus values (they should all be 0 except * for PORT_POWER anyway). */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 46987735a2e3..d664edabf14e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -632,7 +632,7 @@ retry: return -EOVERFLOW; } - /* use rhsc irqs after khubd is fully initialized */ + /* use rhsc irqs after hub_wq is allocated */ set_bit(HCD_FLAG_POLL_RH, &hcd->flags); hcd->uses_new_polling = 1; @@ -909,8 +909,8 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) * choices for RHSC. Many followed the spec; RHSC triggers * on an edge, like setting and maybe clearing a port status * change bit. With others it's level-triggered, active - * until khubd clears all the port status change bits. We'll - * always disable it here and rely on polling until khubd + * until hub_wq clears all the port status change bits. We'll + * always disable it here and rely on polling until hub_wq * re-enables it. */ ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 17d32b0ea565..0aa17c937115 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -585,7 +585,7 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) if (!(status & RH_PS_CCS)) return -ENODEV; - /* khubd will finish the reset later */ + /* hub_wq will finish the reset later */ ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]); return 0; } @@ -610,7 +610,7 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port) /* wrap-aware logic morphed from */ #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0) -/* called from some task, normally khubd */ +/* called from some task, normally hub_wq */ static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port) { __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port]; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index c923cafcaca7..de9428362503 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -283,7 +283,7 @@ static int ohci_omap_reset(struct usb_hcd *hcd) ohci_to_hcd(ohci)->power_budget = 0; } - /* FIXME khubd hub requests should manage power switching */ + /* FIXME hub_wq hub requests should manage power switching */ omap_ohci_transceiver_power(1); /* board init will have already handled HMC and mux setup. diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index da5fb0e3c363..4fe79a2d71a9 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2046,7 +2046,7 @@ static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh) /* simple/paranoid: always delay, expecting the HC needs to read * qh->hw_next or finish a writeback after SPLIT/CSPLIT ... and - * expect khubd to clean up after any CSPLITs we won't issue. + * expect hub_wq to clean up after any CSPLITs we won't issue. * active high speed queues may need bigger delays... */ if (list_empty(&qh->qtd_list) @@ -2501,7 +2501,7 @@ static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd) continue; /* start 20 msec resume signaling from this port, - * and make khubd collect PORT_STAT_C_SUSPEND to + * and make hub_wq collect PORT_STAT_C_SUSPEND to * stop that signaling. */ oxu->reset_done[i] = jiffies + msecs_to_jiffies(20); @@ -3119,7 +3119,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf) /* * Return status information even for ports with OWNER set. - * Otherwise khubd wouldn't see the disconnect event when a + * Otherwise hub_wq wouldn't see the disconnect event when a * high-speed device is switched over to the companion * controller by the user. */ @@ -3194,7 +3194,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, /* * Even if OWNER is set, so the port is owned by the - * companion controller, khubd needs to be able to clear + * companion controller, hub_wq needs to be able to clear * the port-change status bits (especially * USB_PORT_STAT_C_CONNECTION). */ @@ -3336,7 +3336,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq, } /* - * Even if OWNER is set, there's no harm letting khubd + * Even if OWNER is set, there's no harm letting hub_wq * see the wPortStatus values (they should all be 0 except * for PORT_POWER anyway). */ diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index a517151867af..ad0c348e68e9 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -674,7 +674,7 @@ retry: sl811->next_periodic = sl811->periodic[index]; } - /* khubd manages debouncing and wakeup */ + /* hub_wq manages debouncing and wakeup */ if (irqstat & SL11H_INTMASK_INSRMV) { sl811->stat_insrmv++; @@ -714,7 +714,7 @@ retry: #endif /* port status seems weird until after reset, so - * force the reset and make khubd clean up later. + * force the reset and make hub_wq clean up later. */ if (irqstat & SL11H_INTMASK_RD) sl811->port1 &= ~USB_PORT_STAT_CONNECTION; @@ -1079,7 +1079,7 @@ sl811h_hub_status_data(struct usb_hcd *hcd, char *buf) if (!(sl811->port1 & (0xffff << 16))) return 0; - /* tell khubd port 1 changed */ + /* tell hub_wq port 1 changed */ *buf = (1 << 1); return 1; } @@ -1196,7 +1196,7 @@ sl811h_timer(unsigned long _sl811) sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), SL11H_HCTLMASK_ARM); - /* khubd provides debounce delay */ + /* hub_wq provides debounce delay */ } else { sl811->ctrl1 = 0; } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5e9f9bd02335..696160d48ae8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -899,7 +899,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* * Turn on ports, even if there isn't per-port switching. * HC will report connect events even before this is set. - * However, khubd will ignore the roothub events until + * However, hub_wq will ignore the roothub events until * the roothub is registered. */ writel(temp | PORT_POWER, port_array[wIndex]); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 6ad16483da54..a4b89b9d6641 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3760,8 +3760,8 @@ disable_slot: /* * Issue an Address Device command and optionally send a corresponding * SetAddress request to the device. - * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so - * we should only issue and wait on one address command at the same time. + * We should be protected by the usb_address0_mutex in hub_wq's hub_port_init, + * so we should only issue and wait on one address command at the same time. */ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, enum xhci_setup_dev setup) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 90e6644dc886..0bbafe795a72 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2031,7 +2031,7 @@ static int test_unaligned_bulk( * * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), * it locks out usbcore in certain code paths. Notably, if you disconnect - * the device-under-test, khubd will wait block forever waiting for the + * the device-under-test, hub_wq will wait block forever waiting for the * ioctl to complete ... so that usb_disconnect() can abort the pending * urbs and then call usbtest_disconnect(). To abort a test, you're best * off just killing the userspace task and waiting for it to exit. diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 0a34dd859555..a2735df24cc6 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -1,3 +1,4 @@ + /* * Texas Instruments AM35x "glue layer" * diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 7dfc6cb732c9..2daa779f1382 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -433,7 +433,7 @@ static void musb_do_idle(unsigned long _musb) if (!musb->is_active) { u32 wakeups; - /* wait until khubd handles port change status */ + /* wait until hub_wq handles port change status */ if (is_host_active(musb) && (musb->port1_status >> 16)) goto done; diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 2b0f968d9325..f1ea5990a50a 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -609,7 +609,7 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) otg->host->otg_port = fsl_otg_initdata.otg_port; otg->host->is_b_host = otg_dev->fsm.id; /* - * must leave time for khubd to finish its thing + * must leave time for hub_wq to finish its thing * before yanking the host driver out from under it, * so suspend the host after a short delay. */ diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c index 69e49be8866b..8eea56d3ded6 100644 --- a/drivers/usb/phy/phy-isp1301-omap.c +++ b/drivers/usb/phy/phy-isp1301-omap.c @@ -1011,7 +1011,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat) break; case OTG_STATE_A_WAIT_VFALL: state = OTG_STATE_A_IDLE; - /* khubd may take a while to notice and + /* hub_wq may take a while to notice and * handle this disconnect, so don't go * to B_IDLE quite yet. */ diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 0677139c6065..3f4f5fbded55 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -329,7 +329,7 @@ void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, port->wusb_dev = wusb_dev; port->status |= USB_PORT_STAT_CONNECTION; port->change |= USB_PORT_STAT_C_CONNECTION; - /* Now the port status changed to connected; khubd will + /* Now the port status changed to connected; hub_wq will * pick the change up and try to reset the port to bring it to * the enabled state--so this process returns up to the stack * and it calls back into wusbhc_rh_port_reset(). @@ -343,7 +343,7 @@ error_unlock: /* * Disconnect a Wireless USB device from its fake port * - * Marks the port as disconnected so that khubd can pick up the change + * Marks the port as disconnected so that hub_wq can pick up the change * and drops our knowledge about the device. * * Assumes there is a device connected @@ -379,7 +379,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, wusbhc_gtk_rekey(wusbhc); /* The Wireless USB part has forgotten about the device already; now - * khubd's timer will pick up the disconnection and remove the USB + * hub_wq's timer will pick up the disconnection and remove the USB * device from the system */ } diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index f2a8d29e17b9..edc7267157f3 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -64,7 +64,7 @@ * * Note much of the activity is difficult to follow. For example a * device connect goes to devconnect, which will cause the "fake" root - * hub port to show a connect and stop there. Then khubd will notice + * hub port to show a connect and stop there. Then hub_wq will notice * and call into the rh.c:hwahc_rc_port_reset() code to authenticate * the device (and this might require user intervention) and enable * the port. diff --git a/sound/usb/midi.c b/sound/usb/midi.c index 7b166c2be0f7..b2b6f398a4e1 100644 --- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -64,7 +64,7 @@ /* #define DUMP_PACKETS */ /* - * how long to wait after some USB errors, so that khubd can disconnect() us + * how long to wait after some USB errors, so that hub_wq can disconnect() us * without too many spurious errors */ #define ERROR_DELAY_JIFFIES (HZ / 10)