From: Anssi Hannula Date: Sun, 4 May 2014 23:38:43 +0000 (+0300) Subject: ALSA: hda - hdmi: Set converter channel count even without sink X-Git-Url: http://git.efficios.com/?a=commitdiff_plain;h=f06ab794af7055d0949b09885f79f8b493deec64;p=deliverable%2Flinux.git ALSA: hda - hdmi: Set converter channel count even without sink Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel count") channel count is no longer being set if monitor_present is 0. This is because setting the count was moved after the CA value is determined, which is only after the monitor_present check in hdmi_setup_audio_infoframe(). Unfortunately, in some cases, such as with a non-spec-compliant codec or with a problematic video driver, monitor_present is always 0. As a specific example, this seems to happen with gen1 ATV (SiI1390 codec), causing left-channel-only stereo playback (multi-channel playback has apparently never worked with this codec despite it reporting 8 channels, reason unknown). Simply setting converter channel count without setting the pin infoframe and channel mapping as well does not theoretically make much sense as this will just mean they are out-of-sync and multichannel playback will have a wrong channel mapping. However, adding back just setting the converter channel count even in no-monitor case is the safest change which at least fixes the stereo playback regression on SiI1390 codec. Do that. Signed-off-by: Anssi Hannula Reported-by: Stephan Raue Tested-by: Stephan Raue Cc: # 3.12+ Signed-off-by: Takashi Iwai --- diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 0cb5b89cd0c8..1edbb9c47c2d 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1127,8 +1127,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, AMP_OUT_UNMUTE); eld = &per_pin->sink_eld; - if (!eld->monitor_present) + if (!eld->monitor_present) { + hdmi_set_channel_count(codec, per_pin->cvt_nid, channels); return; + } if (!non_pcm && per_pin->chmap_set) ca = hdmi_manual_channel_allocation(channels, per_pin->chmap);