AArch64 GDBserver support.

gdb/
        * configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.

gdb/gdbserver/

        * Makefile.in (clean): Remove aarch64.c and aarch64-without-fpu.c.
        (aarch64.c, aarch64-without-fpu.c): New targets.
        * configure.srv (aarch64*-*-linux*): New.
        * linux-aarch64-low.c: New file.

Ensure ptrace() calls cast arguments 3 and 4 appropriately.

        * linux-low.c (handle_extended_wait, linux_create_inferior)
        (linux_attach_lwp_1, linux_kill_one_lwp, linux_attach_one_lwp)
        (dequeue_one_deferred_signal, linux_resume_one_thread)
        (fetch_register, linux_write_memory, linux_enable_event_reporting)
        (linux_tracefork_grandchild, linux_test_for_tracefork)
        (linux_read_offsets, linux_xfer_siginfo, linux_xfer_siginfo ): Add
        PTRACE_ARG3_TYPE and PTRACE_ARG4_TYPE cast to ptrace arguments
        where the argument is 0.

2013-02-04  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_scan_start_address): Do not fail if no
start address.

Adding aarch64-newlib-tdep support.

        * aarch64-newlib-tdep.c: New file.
        * configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
        aarch64*-*-elf.
        * defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
        * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
        (ALLDEPFILES): Add aarch64-newlib-tdep.c.
        * osabi.c (gdb_osabi_names): Add "Newlib".

Adding aarch64-linux-tdep support.

2013-02-04  Jim MacArthur  <jim.macarthur@arm.com>
            Marcus Shawcroft  <marcus.shawcroft@arm.com>
            Nigel Stephens  <nigel.stephens@arm.com>
            Yufeng Zhang  <yufeng.zhang@arm.com>

        * Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
        (ALLDEPFILES): Add aarch64-linux-tdep.c.
        * aarch64-linux-tdep.c: New file.
        * aarch64-linux-tdep.h: New file.
        * aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
        * configure.tgt: Add aarch64-none-linux-gnu.

Add basic support for AArch64.

        * Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
        (HFILES_NO_SRCDIR): Add aarch64-tdep.h.
        (ALLDEPFILES): Add aarch64-tdep.c.
        * aarch64-tdep.c: New file.
        * aarch64-tdep.h: New file.
        * configure.tgt: Add AArch64.
        * features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
        (aarch64-expedite): New definition.
        * features/aarch64-core.xml: New file.
        * features/aarch64-fpu.xml: New file.
        * features/aarch64-without-fpu.c: New file (generated).
        * features/aarch64-without-fpu.xml: New file.
        * features/aarch64.c: New file (generated).
        * features/aarch64.xml: New file.
        * regformats/aarch64-without-fpu.dat: New file (generated).
        * regformats/aarch64.dat: New file (generated).

* write.c (fixup_segment): Return void.  Delete seg_reloc_count
related code.
(TC_ADJUST_RELOC_COUNT): Delete.
* config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.

* po/POTFILES.in: Regenerate.
* rl78-decode.c: Regenerate.
* rx-decode.c: Regenerate.

* po/POTFILES.in: Regenerate.

* Makefile.am (BFD64_BACKENDS): Remove elf-nacl.lo.
(BFD64_BACKENDS_CFILES): Remove elf-nacl.c.
* Makefile.in: Regenerate.
* po/SRC-POTFILES.in: Regenerate.

include/coff/
* ti.h (SWAP_OUT_RELOC_EXTRA): Define.
bfd/
* coff-tic54x.c (SWAP_OUT_RELOC_EXTRA): Delete.
* coff-tic80.c (SWAP_OUT_RELOC_EXTRA): Delete.

correct pr reference

*** empty log message ***

daily update

gdb/
* contrib/expect-read1.c: New file.
* contrib/expect-read1.sh: New file.

gdb/
* dwarf2read.c (file_file_name): New function with code from
file_full_name.
(file_full_name): Move most of the code to file_file_name.
(macro_start_file): Rename variable full_name to file_name and use
file_file_name for it.  Add comp_dir parameter to new_macro_table.
* macrocmd.c (show_pp_source_pos): New variable fullname.  Replace any
macro_source_file->filename access by macro_source_fullname call.
* macroscope.c (_initialize_macroscope): Update the new_macro_table
caller.
* macrotab.c (struct macro_table): New field comp_dir.
(macro_include): New variables link_fullname and source_fullname.
Replace any macro_source_file->filename access by macro_source_fullname
call.
(macro_lookup_inclusion): Remove the partial filenames checking code.
(check_for_redefinition): New variables source_fullname and
found_key_fullname.  Replace any macro_source_file->filename access by
macro_source_fullname call.
(macro_undef): New variables source_fullname and key_fullname.  Replace
any macro_source_file->filename access by macro_source_fullname call.
(macro_lookup_definition): New variables retval and source_fullname.
Replace any macro_source_file->filename access by macro_source_fullname
call.
(foreach_macro): New variable key_fullname.  Replace any
macro_source_file->filename access by macro_source_fullname call.
(foreach_macro_in_scope): New variable datum_fullname.  Replace any
macro_source_file->filename access by macro_source_fullname call.
(new_macro_table): Add parameter comp_dir.  Initialize T with it.
(macro_source_fullname): New function.
* macrotab.h (struct macro_source_file): Extent the filename field
comment.
(new_macro_table): New parameter comp_dir, add a comment for it.
(macro_source_fullname): new declaration.

gdb/testsuite/
* gdb.linespec/base/one/header.h: New file.
* gdb.linespec/base/two/header.h: New file.
* gdb.linespec/macro-relative.c: New file.
* gdb.linespec/macro-relative.exp: New file.

gdb/
* dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
this_real_name to outer block.  Use it also for
compare_filenames_for_search.
(dw2_expand_symtabs_matching): New variable this_real_name.  Use it
with dw2_get_real_path for file_matcher, considering also
BASENAMES_MAY_DIFFER.
(file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.

gdb/
* dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
to the file_matcher parameter.  Pass 0 to it.
(dwarf2_create_include_psymtab): Copy also DIRNAME.
* psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
NULL psymtab_to_fullname result.
(psymtab_to_fullname): Remove variable r.  Never return NULL, assemble
an expected filename instead.
(expand_symtabs_matching_via_partial): Add basenames parameter to the
file_matcher parameter.  Call also psymtab_to_fullname, after newly
considering BASENAMES_MAY_DIFFER.
* source.c (rewrite_source_path): Remove static.
* source.h (rewrite_source_path): New declaration.
* symfile.h (struct quick_symbol_functions): Add basenames parameter to
the expand_symtabs_matching field.  Comment it.
* symtab.c (file_matches): New function comment.  Add parameter
basenames, implement it.
(search_symbols_file_matches): Add basenames parameter.  Update the
file_matches caller.
(search_symbols): Match FILES also against symtab_to_fullname.
Optimize it for BASENAMES_MAY_DIFFER.

gdb/testsuite/
* gdb.base/fullpath-expand-func.c: New file.
* gdb.base/fullpath-expand.c: New file.
* gdb.base/fullpath-expand.exp: New file.
* gdb.base/realname-expand-real.c: New file.
* gdb.base/realname-expand.c: New file.
* gdb.base/realname-expand.exp: New file.

gdb/
* source.c (print_source_lines_base): Print for TUI also "fullname".
* tui/tui-data.c (init_content_element): Change tui_locator_element
field to full_name.
* tui/tui-data.h (struct tui_locator_element): Likewise.
* tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
tui_update_locator_filename calls to tui_update_locator_fullname.
Replace symtab->filename refererence by symtab_to_fullname call.
* tui/tui-out.c (tui_field_string): Check for "fullname" now.
* tui/tui-source.c (tui_set_source_content): Change tui_locator_element
field to full_name.  Replace symtab->filename refererence by
symtab_to_fullname call.
(tui_show_symtab_source): Rename parameter to fullname.  Change
tui_locator_element field to full_name.
* tui/tui-stack.c: Include source.h.
(tui_set_locator_filename): Rename the declaration to ...
(tui_set_locator_fullname): ... here.  Rename its parameter to
fullname, updates its comment.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_filename): Rename the definition to ...
(tui_set_locator_fullname): ... here.  Rename its parameter to
fullname, updates its comment.  Change tui_locator_element field to
full_name.
(tui_set_locator_info): Rename its parameter to fullname.
(tui_set_locator_info): Rename callee to tui_set_locator_fullname.
(tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here. Rename callee to
tui_set_locator_fullname.
(tui_show_frame_info): Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui-stack.h (tui_update_locator_filename): Rename to ...
(tui_update_locator_fullname): ... here.
* tui/tui-winsource.c (tui_display_main): Rename the callee to
tui_update_locator_fullname.  Replace symtab->filename refererence by
symtab_to_fullname call.
* tui/tui.c (tui_show_source): Rename its parameter to fullname.
Rename the callee to tui_update_locator_fullname.
* tui/tui.h (tui_show_source): Rename its parameter to fullname.

gdb/
* ada-lang.c (user_select_syms): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
(clear_command): New variable sal_fullname, initialize it.  Replace
compare_filenames_for_search by filename_cmp with sal_fullname.
(say_where, update_static_tracepoint): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
Likewise.
* dwarf2read.c: Include source.h.
(fixup_go_packaging): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(create_sals_line_offset, convert_linespec_to_sals): New variable
fullname, initialize it, replace symtab->filename reference by the
variable.
* linux-fork.c: Include source.h.
(info_checkpoints_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
* mdebugread.c: Include source.h.
(psymtab_to_symtab_1): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
(mi_cmd_file_list_exec_source_files): Likewise.
* printcmd.c: Include source.h.
(build_address_symbolic): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* psymtab.c (partial_map_symtabs_matching_filename)
(read_psymtabs_with_fullname): Call compare_filenames_for_search also
with psymtab_to_fullname.
* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(stpy_get_filename): New variable filename, initialize it, use instead
of symtab->filename refererences.
(salpy_str): Make variable filename const char *.  Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
* skip.c: Include source.h and filenames.h.
(skip_file_command): Remove const from the symtab variable.  Replace
symtab->filename refererences by symtab_to_fullname call.
(function_name_is_marked_for_skip): New variables searched_for_fullname
and fullname.  Use them to search also with symtab's fullname.
* source.c (find_source_lines): Replace symtab->filename refererences
by symtab_to_filename_for_display calls.
(print_source_lines_base): New variable filename, use it instead of
symtab->filename.  Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(line_info, forward_search_command): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
(reverse_search_command): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.  New variable filename for it.
* stack.c (frame_info): Likewise.
* symmisc.c: Include source.h.
(dump_objfile, dump_symtab_1, maintenance_print_symbols)
(maintenance_info_symtabs): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
* symtab.c (iterate_over_some_symtabs): Call
compare_filenames_for_search also with symtab_to_fullname.
(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
symtab->filename refererences by symtab_to_filename_for_display calls.
(find_line_symtab): Replace symtab->filename refererences by
symtab_to_filename_for_display calls.
(file_matches): Replace filename_cmp by compare_filenames_for_search.
(print_symbol_info): Make the last parameter const char *.  New
variable s_filename.  Use it in the function.
(symtab_symbol_info): Make the last_filename variable const char *.
Replace symtab->filename refererences by symtab_to_filename_for_display
calls.
(rbreak_command): New variable fullname.  Use it.  Replace
symtab->filename refererence by symtab_to_filename_for_display call.
* tracepoint.c (set_traceframe_context, trace_find_line_command)
(print_one_static_tracepoint_marker): Replace symtab->filename
refererences by symtab_to_filename_for_display calls.
* tui/tui-source.c (tui_set_source_content): New variables filename and
s_filename.  Replace symtab->filename refererences by this variable.
Replace other symtab->filename refererences by
symtab_to_filename_for_display calls.

gdb/
Add a new variable that controls a way in which filenames are
displayed.
* NEWS (set filename-display): New entry.
* source.c (filename_display_basename, filename_display_relative)
(filename_display_absolute, filename_display_kind_names)
(filename_display_string, show_filename_display_string)
(symtab_to_filename_for_display): New.
(_initialize_source): Added initialization of 'filename-display'
variable.
* source.h (symtab_to_filename_for_display): Added declaration.
* stack.c (print_frame): Added new variable and calling of a new
function and condition with this variable. Changed third argument of
calling of a function.

gdb/doc/
* gdb.texinfo (Backtrace): Added description of 'filename-display'
variable in 'set/show backtrace' section.

gdb/testsuite/
* gdb.dwarf2/dw2-dir-file-name.exp: New file.
* gdb.dwarf2/dw2-dir-file-name.c: New file.

gdb/
* tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
Rename field reference filename to fullname.
* tui/tui-data.h (struct tui_source_info): Rename field filename to
fullname.  New comment for it.
* tui/tui-source.c (tui_set_source_content): Rename field reference
filename to fullname.  Initialize field by symtab_to_fullname now.
* tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
reference filename to fullname.  Use symtab_to_fullname during
comparison.

gdb/
Code cleanup.
* dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
(dw2_expand_symtabs_with_fullname): ... here.  Rename parameter
filename to fullname.  Rename variable this_name to this_fullname.
Lowercase FILENAME_CMP call.
(dw2_find_symbol_file): New comment for the returned string.
(dwarf2_gdb_index_functions): Rename the function to
dw2_expand_symtabs_with_fullname.
* psymtab.c (read_psymtabs_with_filename): Rename to ...
(read_psymtabs_with_fullname): ... here.  Rename parameter filename to
fullname.
(psym_functions): Rename the function to read_psymtabs_with_fullname.
* symfile.h (struct quick_symbol_functions): Rename field
expand_symtabs_with_filename to expand_symtabs_with_fullname and its
parameter filename to fullname.  Document returned string meaning for
find_symbol_file.
* symtab.c (find_line_symtab): Rename the called function to
expand_symtabs_with_fullname.

gdb/
Code cleanup.
* breakpoint.c (clear_command): Remove variable is_abs, unify the
call of filename_cmp with compare_filenames_for_search.
* dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
is_abs, unify the call of FILENAME_CMP with
compare_filenames_for_search.  New gdb_asserts for real_path and name.
Unify the call of compare_filenames_for_search with FILENAME_CMP.
* psymtab.c (partial_map_symtabs_matching_filename): Likewise.
* symfile.h (struct quick_symbol_functions): Extend the comment for
map_symtabs_matching_filename.
* symtab.c (compare_filenames_for_search): Remove the function comment
relative path requirement.  Handle absolute filenames, with a comment.
(iterate_over_some_symtabs): Remove variable is_abs, unify the call of
FILENAME_CMP with compare_filenames_for_search.  New gdb_asserts for
real_path and name.  Unify the call of compare_filenames_for_search
with FILENAME_CMP.
(iterate_over_symtabs): New gdb_assert on REAL_PATH.

gdb/testsuite/
* gdb.mi/mi-fullname-deleted.exp: Use double last slash for $srcfileabs.
(compare_filenames_for_search does not match)
(compare_filenames_for_search does match): New tests.

gdb/
Code cleanup.
* breakpoint.c (print_breakpoint_location): Replace bp_location field
source_file references by symtab field references.  Remove variables
sal and fullname.
(momentary_breakpoint_from_master, add_location_to_breakpoint):
(clear_command, say_where): Replace bp_location field source_file
references by symtab field references.
(bp_location_dtor): Remove the source_file reference.
(update_static_tracepoint): Replace bp_location field source_file
references by symtab field references.
(breakpoint_free_objfile): New function.
* breakpoint.h (struct bp_location): Extend the comment for line_number.
Replace the field source_file by field symtab, extend its comment.
(breakpoint_free_objfile): New declaration.
* objfiles.c (free_objfile): Call breakpoint_free_objfile.
* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
field source_file references by symtab field references.

gdb/
Replace xfullpath calls by gdb_realpath calls.
* cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
function comment.
* dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
Remove it from the iterate_over_some_symtabs call.
(dw2_map_symtabs_matching_filename): Remove parameter full_path.
Remove it from the dw2_map_expand_apply calls, remove a block handling
it.
* psymtab.c (partial_map_expand_apply): Remove parameter full_path.
Remove it from the iterate_over_some_symtabs call.
(partial_map_symtabs_matching_filename): Remove parameter full_path.
Remove it from the partial_map_expand_apply calls, remove a block
handling it.  Drop gdb_realpath call and cleanups from the real_path
handling.
* source.c (openp): Drop the comment part about xfullpath.  Replace
xfullpath calls by gdb_realpath calls.
(find_and_open_source): Replace xfullpath call by gdb_realpath call.
* symfile.h (struct quick_symbol_functions): Remove parameter full_path
from method map_symtabs_matching_filename and its comment.
* symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
gdb_realpath call.
* symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
remove it also from the function comment, remove a block handling it.
Drop gdb_realpath call and cleanups from the real_path handling.
(iterate_over_symtabs): Drop variable full_path and its use.
* symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
* utils.c (xfullpath): Remove.
* utils.h (xfullpath): Remove.

gdb/testsuite/
* gdb.gdb/xfullpath.exp: Replace xfullpath calls by gdb_realpath calls.

*** empty log message ***

daily update

gdb/testsuite/
* lib/java.exp (compile_java_from_source): Initialize ARGS as a list.

*** empty log message ***

daily update

Add missing file from the previous commit.

2013-02-01  Andreas Tobler  <andreast@fgznet.ch>

* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
(ALLDEPFILES): Add ppc64-tdep.c.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
ppc64-tdep.o to gdb_target_obs.
* ppc64-tdep.h: New file.
* ppc64-tdep.c: New file.
(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
ppc-linux-tdep.c to here.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
from ppc-linux-tdep.c to here.
(ppc64_convert_from_func_ptr_addr): Rename from
ppc64_linux_convert_from_func_ptr_addr to
ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
here.
* rs6000-tdep.c:
(read_insn): Move from ppc-linux-tdep.c to here.
(insns_match_pattern, insn_d_field, insn_ds_field): Move
from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
* ppc-linux-tdep.c: Include ppc64-tdep.h.
Removed above functions.
(ppc_linux_init_abi): Adjust.

2013-02-01  Aleksandar Ristovski  <aristovski@qnx.com>

        * ada-valprint.c (ada_print_floating): Remove unused 'len'.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00732.html

2013-02-01  Aleksandar Ristovski  <aristovski@qnx.com>

        * ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00732.html

Garbage collect deprecated_pc_in_call_dummy

I noticed there are no users of deprecated_pc_in_call_dummy left in
the tree.

The last user was ARM.  Usage removed here:

http://sourceware.org/ml/gdb-patches/2010-03/msg00820.html

This deletes the function.

2013-02-01  Pedro Alves  <palves@redhat.com>

* dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
* frame.h (deprecated_pc_in_call_dummy): Delete declaration.

gdb/
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.

gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.

* gdb.dwarf2/method-ptr.exp: Use correct form for non-string
attributes.

2013-02-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Tom Tromey  <tromey@redhat.com>

* gdb.dwarf2/method-ptr.exp: Link with c++.
* lib/dwarf.exp (Dwarf::assemble): Declare _cu_count.

* elf64-ppc.c (dec_dynrel_count): Don't error when elf_gc_sweep_symbol
clears def_regular.

*** empty log message ***

daily update

* jit.c (jit_program_space_data): Rename from jit_inferior_data;
change type.
(struct jit_program_space_data): Rename from jit_inferior_data.
Update comments.
(get_jit_program_space_data): Rename from get_jit_inferior_data.
Change return type.  Attach data to program space.
(jit_program_space_data_cleanup): Rename from
jit_inferior_data_cleanup; change argument type.
(jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
change type.
(jit_register_code): Update.
(jit_update_inferior_cache): Remove.
(jit_breakpoint_deleted): Get jit data from the location's program
space.
(jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
'ps_data', change type.
(jit_inferior_init, jit_breakpoint_re_set_internal)
(jit_event_handler): Update.
(free_objfile_data): Get data from objfile's program space.
(_initialize_jit): Update.

PR gdb/13987:
* jit.c (struct jit_inferior_data) <cached_code_address,
jit_breakpoint>: New fields.
(jit_breakpoint_re_set_internal): Fix logging.  Only create
breakpoint if cached address has changed.
(jit_update_inferior_cache, jit_breakpoint_deleted): New
functions.
(_initialize_jit): Register breakpoint deleted observer.
gdb/testsuite
* gdb.base/jit.exp (compile_jit_test): New proc.
Add PIE tests.

2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>

* infrun.c (handle_syscall_event): Remove unused gdbarch.
(save_infcall_suspend_state): Ifdef out unused inf.
(restore_infcall_suspend_state): Ifdef out unused inf.
* jit.c (jit_register_code): Remove unused i, b, inf_data.
(jit_frame_sniffer): Remove unused inf_data.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00773.html

2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>

* c-exp.y (classify_inner_name): Remove unused type.
* c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
need_escape.
(c_get_string): Remove unused kind.
* c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00759.html

2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>

* charset.c (intermediate_encoding): Remove unused i.
* completer.c (signal_completer): Remove unused i.
* continuations.c (discard_my_continuations_1): Remove unused
continuation_ptr.
* corelow.c (core_close): Remove unuseD name.
(get_core_siginfo): Remove unused pid.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
i, cps.
* dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
(loclist_describe_location): Remove unused first.
* event-top.c (command_line_handler): Remove unused got_eof.
* exec.c (exec_close_1): Remove unused need_symtab_cleanup.
(resize_section_table): Remove unused old_value.
* gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
* gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
* i386-tdep.c (i386_process_record): Remove unused rex.
* infcmd.c (get_return_value): Remove unused uiout.
* jv-lang.c (type_from_class): Remove unused is_array.
* jv-valprint.c (java_val_print): Remove unused i.
* linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
* linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
* m2-typeprint.c (m2_print_type): Remove unused code.
* macroexp.c (get_character_constant): Remove unused body_start.
(macro_stringify): Remove unused result.
* objc-lang.c (find_methods): Remove unused gdbarch.
* objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
* regcache.c (regcache_cooked_read): Remove unused gdbarch.
* stack.c (print_frame_args): Remove unused summary.
* thread.c (thread_apply_command): Remove unused p.
* valarith.c (value_x_unop): Remove unused mangle_ptr.
* valops.c (search_struct_method): Remove unused skip.
* valprint.c (generic_val_print): Remove unused byte_order.
* varobj.c (varobj_update): Remove unused changed.
* cli/cli-cmds.c (complete_command): Remove unused next_item.
(alias_command): Remove unused c.
* mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
* mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
format.
(mi_cmd_data_write_memory): Remove unused word_format.
(mi_cmd_data_write_memory_bytes): Remove unused r.
* python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
p_start, p_end.
* python/python.c (_initialize_python): Remove unused cmd_name, cmd.
* tui/tui-disasm.c (tui_set_disassem_content): Remove unused
line_width.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00766.html

2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>

        * dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
        * symtab.c (iterate_over_symtabs): Remove unused s.
        (find_pc_sect_symtab): Remove unused pspAce.
        (find_pc_sect_line): Remove unused alt_symtab.
        (find_pcs_for_symtab_line): Remove unused ix, previous_function.
        (completion_list_add_name): Remove unused newsize.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00764.html

PR c++/14998:
* dwarf2read.c (read_tag_ptr_to_member_type): Handle
TYPE_CODE_FUNC.
gdb/testsuite
* gdb.dwarf2/method-ptr.cc: New file.
* gdb.dwarf2/method-ptr.exp: New file.

* lib/dwarf.exp (namespace Dwarf): New.

2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>

        * target.c (target_read_string): Remove unused origlen.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00754.html

2013-01-31  Aleksandar Ristovski  <aristovski@qnx.com>

        * auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
        * ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
        * ax-general.c (ax_print): Remove unused is_float.
        * blockframe.c (block_innermost_frame): Remove unused start, end.
        * break-catch-sig.c (catch_signal_command): Remove unused gdbarch.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00752.html

* gdb.texinfo (Target Commands): Fix typo.

    * solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
        (svr4_read_so_list): Remove unused lmo.
        * solib-target.c (solib_target_relocate_section_addresses): Remove
        unused flags.

Reference: http://sourceware.org/ml/gdb-patches/2013-01/msg00744.html

2013-01-31  Tristan Gingold  <gingold@adacore.com>

* mach-o.c (bfd_mach_o_scan): Call bfd_mach_o_flatten_sections
earlier.  Fix status checking of bfd_mach_o_scan_start_address.
(bfd_mach_o_scan_start_address): Handle LC_MAIN.

* ld-cris/libdso-13.d: Adjust for --enable-new-dtags now
default for *-*-linux-* by passing explicitly for all targets.

2013-01-31  Tristan Gingold  <gingold@adacore.com>

* gas/ppc/test1xcoff32.d: Updated.
* gas/all/fwdexp.d: Adjusted for AIX.

PR other/543413
* md5.c (md5_process_block):  Handle case that size_t is
a wider-integer-scalar a 32-bit unsigned integer.

PR ld/15056
* elfxx-sparc.c (_bfd_sparc_elf_gc_mark_hook): Handle implicit
references to __tls_get_addr.
* elf32-tilpro.c (tilepro_elf_gc_mark_hook): Likewise.  Correct
vtinherit and vtentry reloc handling too.
* elfxx-tilegx.c (tilegx_elf_gc_mark_hook): As for tilepro.

bfd/
* elf64-ppc.c (ppc_stub_name): Trim off trailing "+0".
ld/testsuite/
* ld-powerpc/tlsexe.d: Update for changed stub names.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.r: Likewise.

Tweak last entry.

* ld-cris/libdso-13.d: Adjust for --enable-new-dtags now default.

*** empty log message ***

daily update

* elf64-ppc.c (build_plt_stub): Correct plt stub branch to glink.

* hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".

* symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
* utils.c (gnu_debuglink_crc32): Remove.
* utils.h (gnu_debuglink_crc32): Don't declare.

* dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
(read_structure_type, read_enumeration_type): Remove cast.

* dwarf2read.c (read_namespace_type): Remove cast.
(read_typedef): Likewise.

PR other/54620
PR target/39064
* md5.h (md5_uintptr, md5_uint32): Define as uintptr_t/uint32_t if
stdint.h and sys/types.h headers are present.
* sha1.h (sha1_uintptr, sha1_uint32): Likewise.

include/opcode/

2013-01-30  Yufeng Zhang  <yufeng.zhang@arm.com>

* aarch64.h (aarch64_op): Add OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2.

opcodes/

2013-01-30  Yufeng Zhang  <yufeng.zhang@arm.com>

* aarch64-tbl.h (aarch64_opcode_table): Flag sshll, sshll2, ushll and
ushll2 with F_HAS_ALIAS.  Add entries for sxtl, sxtl2, uxtl and uxtl2.
* aarch64-asm.c (convert_xtl_to_shll): New function.
(convert_to_real): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
calling convert_xtl_to_shll.
* aarch64-dis.c (convert_shll_to_xtl): New function.
(convert_to_alias): Handle OP_SXTL, OP_SXTL2, OP_UXTL and OP_UXTL2 by
calling convert_shll_to_xtl.
* aarch64-gen.c: Update copyright year.
* aarch64-asm-2.c: Re-generate.
* aarch64-dis-2.c: Re-generate.
* aarch64-opc-2.c: Re-generate.

gas/testsuite/

2013-01-30  Yufeng Zhang  <yufeng.zhang@arm.com>

* gas/aarch64/alias.s: Add new tests.
* gas/aarch64/alias.d: Update.
* gas/aarch64/no-aliases.d: Update.

  * config/tc-metag.c: Make SWAP instruction less permissive with its operands.

  * gas/metag/metacore21-invalid.s: Add invalid SWAP testcases
  * gas/metag/metacore21-invalid.l: Add expected output for invalid SWAP testcases

revert last commit

*** empty log message ***

daily update

* config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
relocs in .word/.etc statements.

* dwarf2read.c (free_dwo_file): Remove assert.
gdb/testsuite
* gdb.dwarf2/fission-reread.exp: Add unload test.

* value.c (deprecated_set_value_modifiable): Remove.
* value.h (deprecated_set_value_modifiable): Remove.

gas/
* config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
immediate value for 8-bit offset" error so it shows line info.

* readelf.c (process_version_sections): Fix overflow checks to
avoid undefined behaviour.

gold/
     * dwp.cc (File_list): New typedef.
     (Dwo_name_info_reader): New class.
     (Dwo_id_info_reader::Dwo_id_info_reader): Remove unused parameters.
     (Dwo_id_info_reader::visit_top_die): Remove unused member function.
     (Dwo_file::~Dwo_file): Delete input_file_ after obj_.
     (Dwo_file::read_executable): New function.
     (Dwo_file::read): Move common setup code to ...
     (Dwo_file::make_object): ... here.
     (dwp_options): Add --exec/-e.
     (usage): Likewise.
     (main): Likewise.

*** empty log message ***

daily update

* dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
to addresses from dwo files.

testsuite/
* gdb.dwarf2/fission-loclists.exp: New file.
* gdb.dwarf2/fission-loclists.S: New file.

* dwarf.c (display_gdb_index): Handle .gdb_index version 8.

PR gas/15069
* tic6x-opcode-table.h: Fix encoding of BNOP instruction.

* gas/tic6x/insns-c674x-pcrel.s: Add test of BNOP instruction
within header based fetch packet.
* gas/tic6x/insns-c674x-pcrel.d: Update expected disassembly.

* elf64-ppc.c: Use %T to print symbols names and remove redundant
"relocation" in error messages throughout file.
(ppc64_elf_relocate_section): Remove sibling call error message,
replace with "call lacks nop".  Specially report errors for
branches to function entry points via OPD lookup and branches
to stubs.  Remove NULL symbol handling now done by %T.

* simops.c (v850_rotl): New function.
(v850_bins): New function.
* simops.h: Add prototypes fir v850_rotl and v850_bins.
* v850-dc: Add entries for V850e3v5.
* v850.igen: Add support for v850e3v5.
(ld.dw, st.dw, rotl, bins): New patterns.

* objcopy.c (parse_flags): Add merge and strings section flags.

* archive.c (bfd_generic_archive_p): Return target and keep
ardata on partial matches.
* format.c (bfd_check_format_matches): Adjust for above
change.  Remove bfd_error_file_ambiguously_recognized dead
code.

*** empty log message ***

daily update

mention fixed bug in ChangeLog

*** empty log message ***

daily update

gdb/testsuite/
Code cleanup.
* gdb.base/restore.exp: Replace gdb_compile, gdb_exit, gdb_start,
gdb_reinitialize_dir and gdb_load by standard_testfile, set executable
and prepare_for_testing.
* gdb.base/store.exp: Likewise.

* bfd.c (struct bfd_preserve, bfd_preserve_save, bfd_preserve_restore,
bfd_preserve_finish): Move to..
* format.c: ..here, splitting out..
(bfd_reinit): ..this.  New function.
(bfd_check_format_matches): Use bfd_preserve_save/restore to
keep bfd state for a match.
* elfcode.h (elf_object_p): Don't use bfd_preserve_save/restore.
* elfcore.h (elf_core_file_p): Likewise.
* mach-o.c (bfd_mach_o_header_p): Likewise.
* pef.c (bfd_pef_object_p, bfd_pef_xlib_object_p): Likewise.
* xsym.c (bfd_sym_object_p): Likewise.
* mmo.c (mmo_scan): Clear abfd->symcount.
* opncls.c (_bfd_new_bfd): Use a smaller section hash table.
* section.c (bfd_section_list_clear): Clear section_htab.count.
* bfd-in2.h: Regenerate.

*** empty log message ***

daily update

* valops.c (find_overload_match): Remove unused argument 'lax'.
* value.h: Remove unused argument 'lax' from the declaration of
find_overload_match.
* eval.c (value_subexp_standard): Do not pass a 'lax' argument
to find_overload_match.
* valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
argument to find_overload_match.