[ARC] BFD fixes.

2016-05-19  Cupertino Miranda  <cmiranda@synopsys.com>

* elf32-arc.c (arc_elf_final_write_processing): Changed.
(debug_arc_reloc): Likewise.
(elf_arc_relocate_section): Likewise.
(elf_arc_check_relocs): Likewise.
(elf_arc_adjust_dynamic_symbol): Likewise.
(elf_arc_add_symbol_hook): Likewise.

LD/testsuite: Fix `ft32-*-*' position in `check_shared_lib_support'

ld/
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Reorder
`ft32-*-*' behind `frv-*-*'.

Remove unsupported `am34-*-linux*' target triplet

The `am34-*-linux*' target cannot be configured for, `am34' is not a CPU
name recognized by `config.sub'.  It has never been, required code has
not been contributed to GNU config, neither before nor since the
addition of the target triplet to our configury with commit bfff16424942
("Add MN10300 linker relaxation support for symbol differences") back in
2007.  Also there is no difference in actual tool configuration between
the `am34-*-linux*' and `am33_2.0-*-linux*' targets, except from a
different executable prefix and tooldir name.

Given the above remove the target triplet from our configuration.

bfd/
* config.bfd: Remove `am34-*-linux*' support.

ld/
* configure.tgt: Remove `am34-*-linux*' support.

Correct "Fix powerpc subis range"

* ppc-opc.c (NSISIGNOPT): Use insert_nsi and extract_nsi.

Fix powerpc subis range

* ppc-opc.c: Formatting.
(NSISIGNOPT): Define.
(powerpc_opcodes <subis>): Use NSISIGNOPT.

Hack crossref tests for powerpc64

A different set of hacks to make the crossref tests pass on powerpc64
and powerpc64le.

* testsuite/ld-scripts/crossref.exp: Remove -mcall-aixdesc hack.
* testsuite/ld-scripts/cross2.t: Tweak .opd and .toc placement.
* testsuite/ld-scripts/cross3.t: Likewise.
* testsuite/ld-scripts/cross4.t: Likewise.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.

ld-elf/shared.exp mix_pic_and_non_pic

Tweaks to make it easier to re-run these testcases by hand.

* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): Pass in
exe name rather than constructing testname.  Fix typo in
sub-test name.  Log copying.  Use -rpath rather than -R.

Allocate ppc64 got and dynrelocs before plt

The idea being to make undefined weak syms dynamic, before deciding
whether a sym needs a plt entry.  Fixes pr19719 ld testcase.

* elf64-ppc.c (allocate_dynrelocs): Allocate got and other dynamic
relocs before plt relocs.

Fix ppc64le S-record test fail

Segfaults on --defsym symbol (__stack_chk_fail in this instance).

* elf64-ppc.c (ppc64_elf_branch_reloc): Check for NULL owner
before dereferencing.

Automatic date update in version.in

gas/arc: Make member of arc_flags const

By making the flgp field of struct arc_flags constant we can remove a
place where we cast away the const-ness of a variable.  Also, given that
the value assigned to this field almost always comes from compile-time
constant data, having the field non-constant is probably a bad thing.

gas/ChangeLog:

* config/tc-arc.c (find_opcode_match): Remove casting away of
const.
* config/tc-arc.h (struct arc_flags): Make flgp field const.

gas/arc: Use BFD_VMA_FMT for printf format specifier

Some debug code has the wrong printf format specifier for some types
that are (ultimately) bfd_vma.  Fixed by using BFD_VMA_FMT string.  This
only becomes an issue when building the tc-arc.c file with -DDEBUG=1 to
build in the debug code.

gas/ChangeLog:

* config/tc-arc.c (md_pcrel_from_section): Use BFD_VMA_FMT where
appropriate.
(md_convert_frag): Likewise.

gas/arc: Fix array overrun when checking opcode array

The opcode array iterator mechanism can, in some situations, result in
reading memory outside of the opcode array.  When using the
iterator-next mechanism to find the next possible arc_opcode, if we find
an opcode where the name field is NULL, or the name does not match, then
the cached opcode pointer is not set to NULL.  The result is that
another call to iterator-next will again increment the opcode
pointer (which might now point outside the opcode array) and attempt to
access the name field of this undefined opcode.

Fixed in this commit by clearing the cached opcode pointer.

I've added a test case, which currently shows the bug, however, this
will only expose this bug while the opcode used (dsp_fp_cmp) is the last
opcode in the table.

gas/ChangeLog:

* config/tc-arc.c (arc_opcode_hash_entry_iterator_next): Set
cached opcode to NULL when we reach a non-matching opcode.
* testsuite/gas/arc/asm-errors-2.d: New file.
* testsuite/gas/arc/asm-errors-2.err: New file.
* testsuite/gas/arc/asm-errors-2.s: New file.

gas/arc: Add guard against operand array overflow.

Currently supplying an input file with too many operands to an
instruction will cause the assembler to overflow and array and trigger
undefined behaviour.

This change checks that we don't access outside the limits of the
operand array.

gas/ChangeLog:

* config/tc-arc.c (tokenize_arguments): Add checks for array
overflow.
* testsuite/gas/arc/asm-errors.s: Addition test line added.
* testsuite/gas/arc/asm-errors.err: Update expected results.

Fix build failure with GCC 4.1.

2016-05-18  Tom Tromey  <tom@tromey.com>

* rust-lang.c (rust_subscript): Initialize "high".

Prevent a run time segmentation fault when stripping a corrupt binary.

PR 20096
* objcopy.c (copy_relocations_in_section): Also check for the
symbol pointed to by sym_ptr_ptr being NULL.

Add mi-threads-interrupt.exp test (PR 20039)

Add a new test for PR 20039.  The test spawns new threads, then tries to
interrupt, continue, and interrupt again.  This use case was fixed by
commit 5fe966540d6b748f825774868463003700f0c878 in master, but gdb 7.11
is affected (so if you try it on the gdb-7.11-branch right now, the test
will fail).

New in v2, the test now handles mi-async on mode properly.  The failure
was specific to mi-async off, but I don't think it's bad to test the
same thing under async on mode.  I added a little hack when running in
async mode to work around bug 20045.

I also removed one continue/interrupt pair, as a single one was enough to
trigger the problem.

gdb/testsuite/ChangeLog:

* gdb.mi/mi-threads-interrupt.c: New file.
* gdb.mi/mi-threads-interrupt.exp: New file.

Fix double prompt output after run control MI commands with mi-async on (PR 20045)

When you use a run control command (-exec-run, -exec-continue,
-exec-next, ...) with mi-async on, an extra (gdb) prompt is displayed:

  -exec-continue
  ^running
  *running,thread-id="all"
  (gdb)
  (gdb)

It doesn't seem to be a big problem for front-ends, since this behavior
started in gdb 7.9 and we haven't heard anything about that.  However,
it caused me some trouble while writing a test for PR 20039 [1].

The problem comes from an extra (gdb) prompt that we write when running
in mi-async off mode to emulate a past buggy behavior.  When executing a
run control command synchronously, previous gdbs always printed a prompt
right away, even though they are not ready to accept new MI commands
until the target stops.  Only at this time should they display a prompt.
But to keep backwards compatibility apparently, we print it anyway.
Since commit 198297aaf, the condition that decides whether we should
print that "bogus" prompt or not has become true, even when running with
mi-async on.  Since we already print a prompt at the end of the
asynchronous command execution, it results in two prompts for one
command.

The proposed fix is to call target_can_async_p instead of
target_is_async_p, to make the condition:

  if (!target_can_async_p () || sync_execution)
    ... show prompt ...

That shows the prompt if we are emulating a synchronous command on top
of an asynchronous target (sync_execution) or if the target simply can't
run asynchronously (!target_can_async_p ()).

Note that this code is changed and this bug fixed by Pedro's separate
console series, but I think it would be nice to have it fixed in the
mean time.

I ran the gdb.mi directory of the testsuite with mi-async on and off, I
didn't see any regressions.

gdb/ChangeLog:

* mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
of target_is_async_p.

[1] https://sourceware.org/ml/gdb-patches/2016-05/msg00075.html

MIPS/opcodes: Correct mixed MIPS16 and microMIPS disassembly

Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested.  However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode.  This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.

Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.

binutils/
* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.

opcodes/
* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
replacing references to `micromips_ase' throughout.
(_print_insn_mips): Don't use file-level microMIPS annotation to
determine the disassembly mode with the symbol table.

Updated Swedish translations for bfd and binutils

rx: make field type enum

gas/ChangeLog:

2016-05-18  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-rx.c (struct cpu_type): Change the type of a field from
int to enum rx_cpu_types.

change the type of some fields to bfd_reloc_code_real_type

gas/ChangeLog:

2016-05-18  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-dlx.c (struct machine_it): change the type of a field from
int to bfd_reloc_code_real_type.
* config/tc-tic4x.c: Likewise.

commit ChangeLog for previous commit

Change type of v850_target_arch to enum bfd_architecture

gas/ChangeLog:

2016-05-18  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-v850.c (v850_target_arch): change type to enum
bfd_architecture.
* config/tc-v850.h (v850_target_arch): Likewise.

Fix lots of linker testsuite failures for the FT32 target.

* scripttempl/ft32.sc: Use fixed constants for memory region
lengths.  Include DWARF debug sections.
(.data .bss): Do not assign locations during relocatable links.
* testsuite/ld-elf/compressed1d.d: Skip for FT32.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-elf/init-fini-array.d: XFail for FT32.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.s: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise.
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Note
that the FT32 does not support shared libraries.

elf32-arm.c build breakage

* elf32-arm.c (elf32_arm_size_stubs): Free or cache local syms
for each BFD.  Don't goto error_ret_free_local from outside loop.

MIPS/readelf: Use the `d_val' dynamic entry member with the relevant tags

binutils/
* readelf.c (dynamic_section_mips_val) <DT_MIPS_RLD_VERSION>
<DT_MIPS_LOCAL_GOTNO, DT_MIPS_CONFLICTNO, DT_MIPS_LIBLISTNO>
<DT_MIPS_SYMTABNO, DT_MIPS_UNREFEXTNO, DT_MIPS_HIPAGENO>
<DT_MIPS_DELTA_CLASS_NO, DT_MIPS_DELTA_INSTANCE_NO>
<DT_MIPS_DELTA_RELOC_NO, DT_MIPS_DELTA_SYM_NO>
<DT_MIPS_DELTA_CLASSSYM_NO, DT_MIPS_COMPACT_SIZE>: Use the
`d_val' rather than `d_ptr' member of the dynamic entry.

PPC_OPERAND_SIGNOPT range.

Commit b84bf58a accidentally extended the range of allowed negative
numbers.

* config/tc-ppc.c (ppc_insert_operand): Trim PPC_OPERAND_SIGNOPT
allowed negative range.
* testsuite/gas/ppc/power9.s: Test xxspltib of -128, not -256.
* testsuite/gas/ppc/power9.d: Update.

Automatic date update in version.in

Fix -exec-run not running asynchronously with mi-async on (PR gdb/18077)

When doing -exec-run on a freshly started GDB, the only target on the
target stack at the time the dummy one.  When mi_async_p is called to
know whether the run should be async, it queries whether the current
target (dummy) supports async, and the answer is no.  The fix is to make
the code query the target that will be used for the run, which is not
necessarily the current target.

No regressions in the gdb.mi directory using the unix, native-gdbserver
and native-extended-gdbserver boards.  The test doesn't pass when
forcing maint set target-async off, obviously, since it makes mi-async
have no effect.  It doesn't seem like other tests are checking for that
eventuality, so I didn't in the new test.

gdb/ChangeLog:

* mi/mi-main.c (run_one_inferior): Use run target to determine
whether to run async or not.
(mi_cmd_exec_run): Likewise.

gdb/testsuite/ChangeLog:

* gdb.mi/mi-async-run.exp: New file.
* gdb.mi/mi-async-run.c: New file.

Rename OP_F90_RANGE to OP_RANGE.

This renames OP_F90_RANGE to OP_RANGE, and similarly renames the
f90_range_type enum.

2016-05-17  Tom Tromey  <tom@tromey.com>

* std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
* rust-lang.c: Don't include f-lang.h.
(rust_range, rust_compute_range, rust_subscript)
(rust_evaluate_subexp): Update.
* rust-exp.y: Don't include f-lang.h.
(ast_range, convert_ast_to_expression): Update.
* parse.c (operator_length_standard): Update.
* f-lang.h (enum f90_range_type): Move to expression.h.
* f-exp.y: Use OP_RANGE.
* expression.h (enum range_type): New enum; renamed from
f90_range_type.
* expprint.c: Don't include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
* eval.c (value_f90_subarray, evaluate_subexp_standard): Update.

Add Rust documentation

This patch adds documentation for the new Rust support in gdb.

2016-05-17  Tom Tromey  <tom@tromey.com>

* NEWS: Add Rust item.

2016-05-17  Tom Tromey  <tom@tromey.com>

* gdb.texinfo (Supported Languages): Mention Rust.  Update menu.
(Rust): New node.

Update gdb test suite for Rust

This updates the gdb test suite for Rust.

2016-05-17  Tom Tromey  <tom@tromey.com>
    Manish Goregaokar <manishsmail@gmail.com>

* lib/rust-support.exp: New file.
* lib/gdb.exp (skip_rust_tests): New proc.
(build_executable_from_specs): Handle rust.
* lib/future.exp (gdb_find_rustc): New proc.
(gdb_default_target_compile): Handle rust.
* gdb.rust/expr.exp: New file.
* gdb.rust/generics.exp: New file.
* gdb.rust/generics.rs: New file.
* gdb.rust/methods.exp: New file.
* gdb.rust/methods.rs: New file.
* gdb.rust/modules.exp: New file.
* gdb.rust/modules.rs: New file.
* gdb.rust/simple.exp: New file.
* gdb.rust/simple.rs: New file.

Add support for the Rust language

This patch adds support for the Rust language.

2016-05-17  Tom Tromey  <tom@tromey.com>
    Manish Goregaokar <manishsmail@gmail.com>

* symtab.c (symbol_find_demangled_name): Handle Rust.
* symfile.c (init_filename_language_table): Treat ".rs" as Rust.
* std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
constants.
* rust-lang.h: New file.
* rust-lang.c: New file.
* rust-exp.y: New file.
* dwarf2read.c (read_file_scope): Add Rust producer sniffing.
(dwarf2_compute_name, read_func_scope, read_structure_type)
(read_base_type, read_subrange_type, set_cu_language)
(new_symbol_full, determine_prefix): Handle Rust.
* defs.h (enum language) <language_rust>: New constant.
* Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
(COMMON_OBS): Add rust-exp.o, rust-lang.o.

2016-05-17  Tom Tromey  <tom@tromey.com>

* gdb.base/default.exp (set language): Add rust.

Add array start and end strings to generic_val_print_decorations

For Rust value-printing, I wanted to use generic_val_print_array, but
I also wanted to control the starting and ending strings.

This patch adds new strings to generic_val_print_decorations, updates
generic_val_print_array to use them, and updates all the existing
instances of generic_val_print_decorations.

2016-05-17  Tom Tromey  <tom@tromey.com>

* valprint.h (struct generic_val_print_array) <array_start,
array_end>: New fields.
* valprint.c (generic_val_print_array): Add "decorations"
parameter.  Use "array_start", "array_end".
(generic_val_print) <TYPE_CODE_ARRAY>: Update.
* p-valprint.c (p_decorations): Update.
* m2-valprint.c (m2_decorations): Update.
* f-valprint.c (f_decorations): Update.
* c-valprint.c (c_decorations): Update.

Add self-test framework to gdb

I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.

The intent is that self tests will only be compiled into gdb in
development mode.  In release mode they simply won't exist.  So, this
exposes $development to C code as GDB_SELF_TEST.

In development mode, test functions are registered with the self test
module.  A test function is just a function that does some checks, and
throws an exception on failure.

Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.

2016-05-17  Tom Tromey  <tom@tromey.com>

* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.

2016-05-17  Tom Tromey  <tom@tromey.com>

* gdb.texinfo (Maintenance Commands): Document "maint selftest".

2016-05-17  Tom Tromey  <tom@tromey.com>

* gdb.gdb/unittest.exp: New file.

Make gdb expression debugging handle OP_F90_RANGE

print_subexp_standard and dump_subexp_body_standard did not handle
OP_F90_RANGE.  Attempting to dump an expression using this opcode
would fail.

This patch adds support for this opcode to these functions.

2016-05-17  Tom Tromey  <tom@tromey.com>

* expprint.c: Include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Handle
OP_F90_RANGE.

Fix latent yacc-related bug in gdb/Makefile.in init.c rule

gdb's Makefile.in does not currently scan .y files to add global
initializers from these files to init.c.  However, at least ada-exp.y
tries to use this feature.

This patch fixes the problem.

2016-05-17  Tom Tromey  <tom@tromey.com>

* Makefile.in (init.c): Search .y files for initialization
functions.

Add DW_LANG_Rust

include/
* dwarf2.h (enum dwarf_source_language) <DW_LANG_Rust,
DW_LANG_Rust_old>: New constants.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@235643 138bc75d-0d04-0410-961f-82ee72b054a4

Check global CC in at_least_gcc_version

at_least_gcc_version should check global CC.

* testsuite/lib/ld-lib.exp (at_least_gcc_version): Check
global CC.

Fix date in ChangeLog

Make ARMv8-M GAS tests pass on non ELF targets

2016-05-17  Thomas Preud'homme  <thomas.preudhomme@arm.com>

gas/
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Force Thumb when
disassembling and stop skipping targets.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
* testsuite/gas/arm/archv8m-base.d: Also allow nops after the last
instruction for targets that have stronger alignment requirement.
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
* testsuite/gas/arm/archv8m-main.d: Likewise.
* testsuite/gas/arm/archv8m.s: Add label.
* testsuite/gas/arm/archv8m-cmse.s: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise.

Place progmem data from AVR's libc before other progmem data.

* scripttempl/avr.sc (text): Place .progmem.data from avr-libc
above .progmem*.
* scripttempl/avrtiny.sc (text): Likewise.

LD/ELF: Unify STB_GNU_UNIQUE handling

Take STB_GNU_UNIQUE handling scattered across targets and gather it in
the generic ELF linker.  Update test suite infrastructure accordingly.

bfd/
* elf-s390-common.c (elf_s390_add_symbol_hook): Remove
STB_GNU_UNIQUE handling.
* elf32-arc.c (elf_arc_add_symbol_hook): Likewise.
* elf32-arm.c (elf32_arm_add_symbol_hook): Likewise.
* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* elf64-x86-64.c (elf_x86_64_add_symbol_hook): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
* elfxx-mips.c (_bfd_mips_elf_add_symbol_hook): Likewise.
* elf32-i386.c (elf_i386_add_symbol_hook): Remove function.
(elf_backend_add_symbol_hook): Remove macro.
* elflink.c (elf_link_add_object_symbols): Set `has_gnu_symbols'
for STB_GNU_UNIQUE symbols.

binutils/
* testsuite/lib/binutils-common.exp (supports_gnu_unique): New
procedure.
* testsuite/binutils-all/objcopy.exp: Use `supports_gnu_unique'
with the `strip-10' test.

ld/
* testsuite/ld-unique/unique.exp: Use `is_elf_format' and
`supports_gnu_unique' to qualify testing.

Use unsuspend_all_lwps

This patch is to replace find_inferior (&all_threads, unsuspend_one_lwp, NULL)
with unsuspend_all_lwps (NULL), which is shorter.  They are equivalent
to each other.

gdb/gdbserver:

2016-05-17  Yao Qi  <yao.qi@linaro.org>

* linux-low.c (linux_stabilize_threads): Call unsuspend_all_lwps
instead of find_inferior.

Automatic date update in version.in

Match shell_prompt # in batch-preserve-term-settings.exp

batch-preserve-term-settings.exp fails if the shell prompt isn't $.  It
is # in our testing env.  In fact, the shell prompt can be anything.

The perfect solution would be "set_board_info shell_prompt" in the
host board file, and use board_info shell_prompt in
batch-preserve-term-settings.exp.  This is a little bit overkill to
me, and we still need to figure out the different prompts on different
shells.  I also tried to start shell with the prompt preset, but there is
not unique way to set shell prompt in different shells, so I give up.

It is reasonably simple to match either $ or # for the shell prompt, and
we can easily extend it to match other char, like >.

gdb/testsuite:

2016-05-16  Yao Qi  <yao.qi@linaro.org>

* gdb.base/batch-preserve-term-settings.exp: Remove variable
shell_prompt.  Update shell_prompt_re.

V850/BFD: Call `_bfd_elf_copy_private_bfd_data' again

Correct a regression introduced with commit 685080f21003 ("Adds support
for generating notes in V850 binaries.") which replaced rather than
extending the call to `_bfd_elf_copy_private_bfd_data' with
`v850_elf_copy_private_bfd_data'.  Consequently ELFOSABI_GNU marking is
not propagated to output by `objcopy' from objects containing
STB_GNU_UNIQUE symbols.

bfd/
* elf32-v850.c (v850_elf_copy_notes): New function, factored out
from...
(v850_elf_copy_private_bfd_data): ... here.  Call the new
function and `_bfd_elf_copy_private_bfd_data'.

binutils/
* testsuite/binutils-all/objcopy.exp: Don't skip the `strip-10'
test for the V850.

m32r: make mach_table static and const

It is only read in tc-m32r.c, so it might as well be static and const, and
that should help the compiler slightly.

gas/ChangeLog:

2016-05-16  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-m32r.c (mach_table): Make static and const.

tc-vax.c: make prototype of flonum_gen2vax match its definition

gas/ChangeLog:

2016-05-16  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-vax.c (flonum_gen2vax): Adjust prototype to match
definition.

stop defining linkrelax in multiple places

Defining linkrelax to have different values in as.c and tc-msp430.c /
tc-mn10300.c is at least rather tricky, and seems fragile, when we can just set
it in md_begin instead.

gas/ChangeLog:

2016-05-16  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-mn10300.c (md_begin): set linkrelax here instead of
defining it.
* config/tc-msp430.c (md_begin): Likewise.

m68hc11: make some vars type bfd_reloc_code_real_type

These variables only hold values from the bfd_reloc_code_real_type enum, and
are passed to functions that expect the argument to be of type
bfd_reloc_code_real_type, so it seems to make sense that there type is
bfd_reloc_code_real_type rather than int.

gas/ChangeLog:

2016-05-16  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-m68hc11.c (fixup8): Change variables type from int to
bfd_reloc_code_real_type where appropriate.
(fixup16): Likewise.
(fixup8_xg): Likewise.

ld/testsuite/ld-elf/flags1.d: Update the xfail list

Update to match commit 924bc11ba455 ("Update section merge test.").

ld/
* testsuite/ld-elf/flags1.d: Update the xfail list.

Automatic date update in version.in

SH64/GAS: Fix a -Wwrite-strings build failure

Fix a commit 6757cf57697d ("enable -Wwrite-strings for gas") regression.

gas/
* config/tc-sh64.c (shmedia_check_limits): Constify `msg'.

ld/testsuite/ld-elf/flags1.d: Update for `*-*-nacl*' xfail removal

ld/
* testsuite/ld-elf/flags1.d: Update for `*-*-nacl*' xfail
removal.

Automatic date update in version.in

Remove redundant sizeof on EXPECTED_VIEW_LENGTH

PR ld/20097
* testplug2.c (onall_symbols_read): Remove redundant sizeof
on EXPECTED_VIEW_LENGTH.
* testplug4.c (onall_symbols_read): Likewise.

Automatic date update in version.in

Accept valid one byte signed and unsigned values for the IMM8 operand.

opcodes/
* ppc-opc.c (IMM8): Use PPC_OPERAND_SIGNOPT.

gas/
* testsuite/gas/ppc/power9.d <xxspltib>: Add additional operand tests.
* testsuite/gas/ppc/power9.s: Likewise.

Don't convert GOTPCREL relocation against large section

bfd/

PR ld/20093
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Don't convert
GOTPCREL relocation against large section.

ld/

PR ld/20093
* testsuite/ld-x86-64/pr20093-1.d: New file.
* testsuite/ld-x86-64/pr20093-1.s: Likewise.
* testsuite/ld-x86-64/pr20093-2.d: Likewise.
* testsuite/ld-x86-64/pr20093-2.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr20093-1 and pr20093-2.

Fix build breakage

* config/obj-coff.c (weak_uniquify): Delete unused var.

Set dynamic tag VMA and size from dynamic section when possible

Rather than searching the output for a specific named section, it's
better, where possible, to use a linker created dynamic section to set
a dynamic tag's value.  That way ld doesn't depend on the output
section name, making it possibile to map dynamic sections differently.

bfd/
* elf-m10300.c (_bfd_mn10300_elf_finish_dynamic_sections): Use
linker dynamic sections in calculating size and address of
* dynamic tags rather than using output sections.  Remove asserts.
* elf32-arm.c (elf32_arm_finish_dynamic_sections): Likewise.
* elf32-cr16.c (_bfd_cr16_elf_finish_dynamic_sections): Likewise.
* elf32-cris.c (elf_cris_finish_dynamic_sections): Likewise.
* elf32-i370.c (i370_elf_finish_dynamic_sections): Likewise.
* elf32-lm32.c (lm32_elf_finish_dynamic_sections): Likewise.
* elf32-m32r.c (m32r_elf_finish_dynamic_sections): Likewise.
* elf32-m68k.c (elf_m68k_finish_dynamic_sections): Likewise.
* elf32-metag.c (elf_metag_finish_dynamic_sections): Likewise.
* elf32-microblaze.c (microblaze_elf_finish_dynamic_sections): Likewise.
* elf32-nds32.c (nds32_elf_finish_dynamic_sections): Likewise.
* elf32-nios2.c (nios2_elf32_finish_dynamic_sections): Likewise.
* elf32-or1k.c (or1k_elf_finish_dynamic_sections): Likewise.
* elf32-s390.c (elf_s390_finish_dynamic_sections): Likewise.
* elf32-score.c (s3_bfd_score_elf_finish_dynamic_sections): Likewise.
* elf32-score7.c (s7_bfd_score_elf_finish_dynamic_sections): Likewise.
* elf32-vax.c (elf_vax_finish_dynamic_sections): Likewise.
* elf32-xtensa.c (elf_xtensa_finish_dynamic_sections): Likewise.
* elf64-alpha.c (elf64_alpha_finish_dynamic_sections): Likewise.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.
* elf64-sh64.c (sh64_elf64_finish_dynamic_sections): Likewise.
* elflink.c (bfd_elf_final_link): Likewise.
* elfxx-mips.c (_bfd_mips_elf_finish_dynamic_sections): Likewise.
* elfxx-sparc.c (sparc_finish_dyn): Likewise.  Adjust error message.
* elf32-arc.c (GET_SYMBOL_OR_SECTION): Remove ASSERT arg and
don't set doit.  Look up dynobj section.
(elf_arc_finish_dynamic_sections): Adjust GET_SYMBOL_OR_SECTION
invocation and dynamic tag vma calculation.  Don't test
boolean var == TRUE.
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_sections): Fix
DT_JMPREL calc.
ld/
* testsuite/ld-arm/arm-elf.exp: Adjust for arm-no-rel-plt now passing.
Use different output file name for static app without .rel.plt.
* testsuite/ld-arm/arm-no-rel-plt.ld: Align .rel.dyn and .rela.dyn.
* testsuite/ld-arm/arm-no-rel-plt.out: Delete.
* testsuite/ld-arm/arm-no-rel-plt.r: New.
* testsuite/ld-arm/arm-static-app.d: Don't check file name.
* testsuite/ld-arm/arm-static-app.r: Likewise.

ld -z combreloc elf_link_sort_relocs

A linker script may put .rela.plt in with other .rela.dyn relocs.
The change to elf_reloc_type_class puts any PLT relocs last.  This
patch makes the input section layout better match the sorted relocs.

* elflink.c (elf_link_sort_relocs): Wrap overlong lines.  Fix
octets_per_byte.  Put dynamic .rela.plt last in link orders.
Assign output_offset for reloc sections rather than writing
sorted relocs from block corresponding to output_offset.

use XNEW and related macros more

Its a bit shorter and simpler than raw xmalloc.

gas/ChangeLog:

2016-05-13  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* app.c (app_push): Use XNEW and related macros.
* as.c (parse_args): Likewise.
* cgen.c (make_right_shifted_expr): Likewise.
(gas_cgen_tc_gen_reloc): Likewise.
* config/bfin-defs.h: Likewise.
* config/bfin-parse.y: Likewise.
* config/obj-coff.c (stack_init): Likewise.
(stack_push): Likewise.
(coff_obj_symbol_new_hook): Likewise.
(coff_obj_symbol_clone_hook): Likewise.
(add_lineno): Likewise.
(coff_frob_symbol): Likewise.
* config/obj-elf.c (obj_elf_section_name): Likewise.
(build_group_lists): Likewise.
* config/obj-evax.c (evax_symbol_new_hook): Likewise.
* config/obj-macho.c (obj_mach_o_indirect_symbol): Likewise.
* config/tc-aarch64.c (insert_reg_alias): Likewise.
(find_or_make_literal_pool): Likewise.
(add_to_lit_pool): Likewise.
(fill_instruction_hash_table): Likewise.
* config/tc-alpha.c (load_expression): Likewise.
(emit_jsrjmp): Likewise.
(s_alpha_ent): Likewise.
(s_alpha_end): Likewise.
(s_alpha_linkage): Likewise.
(md_begin): Likewise.
(tc_gen_reloc): Likewise.
* config/tc-arc.c (arc_insert_opcode): Likewise.
(arc_extcorereg): Likewise.
* config/tc-bfin.c: Likewise.
* config/tc-cr16.c: Likewise.
* config/tc-cris.c: Likewise.
* config/tc-crx.c (preprocess_reglist): Likewise.
* config/tc-d10v.c: Likewise.
* config/tc-frv.c (frv_insert_vliw_insn): Likewise.
(frv_tomcat_shuffle): Likewise.
* config/tc-h8300.c: Likewise.
* config/tc-i370.c (i370_macro): Likewise.
* config/tc-i386.c (lex_got): Likewise.
(md_parse_option): Likewise.
* config/tc-ia64.c (alloc_record): Likewise.
(set_imask): Likewise.
(save_prologue_count): Likewise.
(dot_proc): Likewise.
(dot_endp): Likewise.
(ia64_frob_label): Likewise.
(add_qp_imply): Likewise.
(add_qp_mutex): Likewise.
(mark_resource): Likewise.
(dot_alias): Likewise.
* config/tc-m68hc11.c: Likewise.
* config/tc-m68k.c (m68k_frob_label): Likewise.
(s_save): Likewise.
(mri_control_label): Likewise.
(push_mri_control): Likewise.
(build_mri_control_operand): Likewise.
(s_mri_else): Likewise.
(s_mri_break): Likewise.
(s_mri_next): Likewise.
(s_mri_for): Likewise.
(s_mri_endw): Likewise.
* config/tc-metag.c (create_mnemonic_htab): Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c (s_loc): Likewise.
* config/tc-nds32.c (nds32_relax_hint): Likewise.
* config/tc-nios2.c (nios2_insn_reloc_new): Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c (rx_include): Likewise.
* config/tc-sh.c: Likewise.
* config/tc-sh64.c (shmedia_frob_section_type): Likewise.
* config/tc-sparc.c: Likewise.
* config/tc-spu.c: Likewise.
* config/tc-tic6x.c (static tic6x_unwind_info *tic6x_get_unwind): Likewise.
(tic6x_start_unwind_section): Likewise.
* config/tc-tilegx.c: Likewise.
* config/tc-tilepro.c: Likewise.
* config/tc-v850.c: Likewise.
* config/tc-visium.c: Likewise.
* config/tc-xgate.c: Likewise.
* config/tc-xtensa.c (xtensa_translate_old_userreg_ops): Likewise.
(new_resource_table): Likewise.
(resize_resource_table): Likewise.
(xtensa_create_trampoline_frag): Likewise.
(xtensa_maybe_create_literal_pool_frag): Likewise.
(cache_literal_section): Likewise.
* config/xtensa-relax.c (append_transition): Likewise.
(append_condition): Likewise.
(append_value_condition): Likewise.
(append_constant_value_condition): Likewise.
(append_literal_op): Likewise.
(append_label_op): Likewise.
(append_constant_op): Likewise.
(append_field_op): Likewise.
(append_user_fn_field_op): Likewise.
(enter_opname_n): Likewise.
(enter_opname): Likewise.
(split_string): Likewise.
(parse_insn_templ): Likewise.
(clone_req_or_option_list): Likewise.
(clone_req_option_list): Likewise.
(parse_option_cond): Likewise.
(parse_insn_pattern): Likewise.
(parse_insn_repl): Likewise.
(build_transition): Likewise.
(build_transition_table): Likewise.
* dw2gencfi.c (alloc_fde_entry): Likewise.
(alloc_cfi_insn_data): Likewise.
(cfi_add_CFA_remember_state): Likewise.
(dot_cfi_escape): Likewise.
(dot_cfi_fde_data): Likewise.
(select_cie_for_fde): Likewise.
* dwarf2dbg.c (dwarf2_directive_loc): Likewise.
* ecoff.c (ecoff_add_bytes): Likewise.
(ecoff_build_debug): Likewise.
* input-scrub.c (input_scrub_push): Likewise.
(input_scrub_begin): Likewise.
(input_scrub_next_buffer): Likewise.
* itbl-ops.c (append_insns_as_macros): Likewise.
(alloc_entry): Likewise.
(alloc_field): Likewise.
* listing.c (listing_newline): Likewise.
(listing_listing): Likewise.
* macro.c (get_any_string): Likewise.
(delete_macro): Likewise.
* stabs.c (generate_asm_file): Likewise.
(stabs_generate_asm_lineno): Likewise.
* subsegs.c (subseg_change): Likewise.
(subseg_get): Likewise.
* symbols.c (define_dollar_label): Likewise.
(symbol_relc_make_sym): Likewise.
* write.c (write_relocs): Likewise.

use xstrdup, xmemdup0 and concat more

gas/ChangeLog:

2016-05-13  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/obj-coff.c (obj_coff_def): Simplify string copying.
(weak_name2altname): Likewise.
(weak_uniquify): Likewise.
(obj_coff_section): Likewise.
(obj_coff_init_stab_section): Likewise.
* config/obj-elf.c (obj_elf_section_name): Likewise.
(obj_elf_init_stab_section): Likewise.
* config/obj-evax.c (evax_shorten_name): Likewise.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Likewise.
* config/tc-aarch64.c (create_register_alias): Likewise.
* config/tc-alpha.c (load_expression): Likewise.
(s_alpha_file): Likewise.
(s_alpha_section_name): Likewise.
(tc_gen_reloc): Likewise.
* config/tc-arc.c (md_assemble): Likewise.
* config/tc-arm.c (create_neon_reg_alias): Likewise.
(start_unwind_section): Likewise.
* config/tc-hppa.c (pa_build_unwind_subspace): Likewise.
(hppa_elf_mark_end_of_function): Likewise.
* config/tc-nios2.c (nios2_modify_arg): Likewise.
(nios2_negate_arg): Likewise.
* config/tc-rx.c (rx_section): Likewise.
* config/tc-sh64.c (sh64_consume_datalabel): Likewise.
* config/tc-tic30.c (tic30_find_parallel_insn): Likewise.
* config/tc-tic54x.c (tic54x_include): Likewise.
(tic54x_macro_info): Likewise.
(subsym_get_arg): Likewise.
(subsym_substitute): Likewise.
(tic54x_start_line_hook): Likewise.
* config/tc-xtensa.c (xtensa_literal_prefix): Likewise.
(xg_reverse_shift_count): Likewise.
* config/xtensa-relax.c (enter_opname_n): Likewise.
(split_string): Likewise.
* dwarf2dbg.c (get_filenum): Likewise.
(process_entries): Likewise.
* expr.c (operand): Likewise.
* itbl-ops.c (alloc_entry): Likewise.
* listing.c (listing_message): Likewise.
(listing_title): Likewise.
* macro.c (check_macro): Likewise.
* stabs.c (s_xstab): Likewise.
* symbols.c (symbol_relc_make_expr): Likewise.
* write.c (compress_debug): Likewise.

Automatic date update in version.in

Handle symbols defined/referenced only within IR

The plugin is called to claim symbols in an archive element from
plugin_object_p.  But those symbols aren't needed to create output.
They are defined and referenced only within IR.  get_symbols should
return resolution based on IR symbol kinds.

PR ld/20070
* Makefile.am (noinst_LTLIBRARIES): Add libldtestplug4.la.
(libldtestplug4_la_SOURCES): New.
(libldtestplug4_la_CFLAGS): Likewise.
(libldtestplug4_la_LDFLAGS): Likewise.
* Makefile.in: Regenerated.
* plugin.c (get_symbols): Return resolution based on IR symbol
kinds for symbols defined/referenced only within IR.
* testplug4.c: New file.
* ld/testsuite/ld-plugin/pr20070.d: Likewise.
* ld/testsuite/ld-plugin/pr20070a.c: Likewise.
* ld/testsuite/ld-plugin/pr20070b.c: Likewise.
* testsuite/ld-plugin/plugin.exp (plugin4_name): New.
(plugin4_path): Likewise.
Add a test for ld/20070.

PR symtab/19999 gdb unable to resolve vars with fission+PIE

gdb/ChangeLog:

* dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
add base_offset.

gdb/testsuite/ChangeLog:

* lib/dwarf.exp (build_executable_from_fission_assembler): Pass
$options when building executable.
* gdb.dwarf2/fission-loclists-pie.c: New file.
* gdb.dwarf2/fission-loclists-pie.exp: New file.

Use correct regexp syntax in ARM PR20068 test

ld -z combreloc reloc sorting

PLT relocs don't appear in .rela.dyn, at least not when using
normal linker scripts.  However, if they do, then they ought to be
placed last rather than in the middle of other relocs.

* elf-bfd.h (elf_reloc_type_class): Put reloc_class_plt last.

Automatic date update in version.in

Update pr20068 test to allow for big endian ARM configuration

Add MIPS32 DSPr3 support.

bfd/

* elfxx-mips.c (print_mips_ases): Add DSPR3.

binutils/

* readelf.c (print_mips_ases): Add DSPR3.

gas/

* config/tc-mips.c (options): Add OPTION_DSPR3 and
OPTION_NO_DSPR3.
(md_longopts): Likewise.
(md_show_usage): Add help for -mdspr3 and -mno-dspr3.
(mips_ases): Define availability for DSPr3.
(mips_ase_groups): Add ASE_DSPR3 to the DSP group.
(mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3.
* doc/as.texinfo: Document -mdspr3, -mno-dspr3.  Fix -mdspr2
formatting.
* doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and
.set nodspr3.  Fix -mdspr2 formatting.
* testsuite/gas/mips/mips32-dspr3.d: New file.
* testsuite/gas/mips/mips32-dspr3.s: Likewise.
* testsuite/gas/mips/mips.exp: Run mips32-dspr3 test.

include/

* elf/mips.h (AFL_ASE_DSPR3): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_DSPR3.
* opcode/mips.h (ASE_DSPR3): New macro.

opcodes/

* mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and
mips64r6.
* mips-opc.c (D34): New macro.
(mips_builtin_opcodes): Define bposge32c for DSPr3.

[HPPA] Attach linker created dynamic sections to stub bfd

bfd/
* elf32-hppa.c (elf32_hppa_init_stub_bfd): New function.
(elf32_hppa_check_relocs): Don't set dynobj.
(elf32_hppa_size_stubs): Test !SEC_LINKER_CREATED for stub sections.
(elf32_hppa_build_stubs): Likewise.
* elf32-hppa.h (elf32_hppa_init_stub_bfd): Declare.
ld/
* emultempl/hppaelf.em (hppaelf_create_output_section_statements):
Call elf32_hppa_init_stub_bfd.

ld --gc-sections fail with __tls_get_addr_opt

When --gc-sections is active, __tls_get_addr_opt is marked as not
needed and forced local before ppc*_elf_tls_setup is run.

bfd/
PR 20060
* elf64-ppc.c (ppc64_elf_tls_setup): Clear forced_local.
* elf32-ppc.c (ppc_elf_tls_setup): Likewise.
ld/
PR 20060
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
* testsuite/ld-powerpc/tlsdll.s: New.
* testsuite/ld-powerpc/tlsdll.ver: New.
* testsuite/ld-powerpc/tlsdll_32.s: New.
* testsuite/ld-powerpc/tlsopt5.d: New.
* testsuite/ld-powerpc/tlsopt5.s: New.
* testsuite/ld-powerpc/tlsopt5_32.d: New.
* testsuite/ld-powerpc/tlsopt5_32.s: New.

Ensure that padding in the constant pool uses constant values.

PR target/20068
* config/tc-arm.c (add_to_lit_pool): Ensure that the padding added
to the pool uses O_constant.
* testsuite/gas/arm/pr20068.s: New test.
* testsuite/gas/arm/pr20068.d: Test driver.

[AArch64] Remove redundant tls relax in elfNN_aarch64_final_link_relocate

bfd/
  * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Remove redundant
  aarch64_tls_transition check.

oops - fix up changelog entry

Skip new ARM security extension tests on non-ELF based targets.

* testsuite/gas/arm/archv8m-cmse-base.d: Skip for non-ELF ARM targets.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.

fix up two issues with the removal of unused variables

gdb/ChangeLog:

2016-05-10  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
anything.
* linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.

Automatic date update in version.in

Enable Intel RDPID instruction.

This patch enables Intel RDPID instruction described in Intel64 and
IA-32 Architectures Software Developer's Manual, April 2016.

gas/

* config/tc-i386.c (cpu_arch): Add RDPID.
* doc/c-i386.texi: Document RDPID.

gas/testsuite/

* gas/i386/i386.exp: Run RDPID tests.
* gas/i386/prefix.d: Adjust.
* gas/i386/rdpid.s: New test.
* gas/i386/rdpid.d: Ditto.
* gas/i386/rdpid-intel.d: Ditto.
* gas/i386/x86-64-rdpid.s: Ditto.
* gas/i386/x86-64-rdpid.d: Ditto.
* gas/i386/x86-64-rdpid-intel.d: Ditto.

opcodes/

* i386-dis.c (prefix_table): Add RDPID instruction.
* i386-gen.c (cpu_flag_init): Add RDPID flag.
(cpu_flags): Add RDPID bitfield.
* i386-opc.h (enum): Add RDPID element.
(i386_cpu_flags): Add RDPID field.
* i386-opc.tbl: Add RDPID instruction.
* i386-init.h: Regenerate.
* i386-tbl.h: Regenerate.

Allow veneers to claim veneered symbols

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* elf32-arm.c (enum elf32_arm_stub_type): New max_stub_type
enumerator.
(arm_stub_sym_claimed): New function.
(elf32_arm_create_stub): Use veneered symbol name and section if
veneer needs to claim its symbol, and keep logic unchanged otherwise.
(arm_stub_claim_sym): New function.
(arm_map_one_stub): Call arm_stub_claim_sym if veneer needs to claim
veneered symbol, otherwise create local symbol as before.

Use getters/setters to access ARM branch type

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.

gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.

gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.

include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.

ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.

opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.

Allow stubs without associated input section in ARM backend

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* bfd-in.h (elf32_arm_size_stubs): Add an output section parameter.
* bfd-in2.h: Regenerated.
* elf32-arm.c (struct elf32_arm_link_hash_table): Add an output section
parameter to add_stub_section callback.
(elf32_arm_create_or_find_stub_sec): Get output section from link_sec
and pass it down to add_stub_section.
(elf32_arm_add_stub): Set section to stub_sec if NULL before using it
for error message.
(elf32_arm_size_stubs): Add output section parameter to
add_stub_section function pointer parameter.

ld/
* emultempl/armelf.em (elf32_arm_add_stub_section): Add output_section
parameter and rename input_section parameter to after_input_section.
Append input stub section to the output section if after_input_section
is NULL.

Factor our stub creation in ARM backend

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* elf32-arm.c (elf32_arm_create_stub): New function.
(elf32_arm_size_stubs): Use elf32_arm_create_stub for stub creation.

Refactor Cortex-A8 erratum workaround in preparation

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* elf32-arm.c (enum elf32_arm_stub_type): Delete
arm_stub_a8_veneer_lwm enumerator.
(arm_stub_a8_veneer_lwm): New unsigned constant to replace
aforementioned enumerator.
(struct elf32_arm_stub_hash_entry): Delete target_addend
field and add source_value.
(struct a8_erratum_fix): Delete addend field and add target_offset.
(stub_hash_newfunc): Initialize source_value field amd remove
initialization for target_addend.
(arm_build_one_stub): Stop special casing Thumb relocations: promote
the else to being always executed, moving the
arm_stub_a8_veneer_b_cond specific code in it.  Remove
stub_entry->target_addend from points_to computation.
(cortex_a8_erratum_scan): Store in a8_erratum_fix structure the offset
to target symbol from start of section rather than the offset from the
stub address.
(elf32_arm_size_stubs): Set stub_entry's source_value and target_value
fields from struct a8_erratum_fix's offset and target_offset
respectively.
(make_branch_to_a8_stub): Rename target variable to loc.  Compute
veneered_insn_loc and loc using stub_entry's source_value.

Add support for ARMv8-M Mainline with DSP extension

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
(elf32_arm_merge_eabi_attributes): Add merging logic for
Tag_DSP_extension.

binutils/
* readelf.c (display_arm_attribute): Add output for Tag_DSP_extension.
(arm_attr_public_tags): Define DSP_extension attribute.

gas/
* NEWS: Document ARMv8-M and ARMv8-M Security and DSP Extensions.
* config/tc-arm.c (arm_ext_dsp): New feature for Thumb DSP
instructions.
(arm_extensions): Add dsp extension for ARMv8-M Mainline.
(aeabi_set_public_attributes): Memorize the feature bits of the
architecture selected for Tag_CPU_arch.  Use it to set
Tag_DSP_extension to 1 for ARMv8-M Mainline with DSP extension.
(arm_convert_symbolic_attribute): Define Tag_DSP_extension.
* testsuite/gas/arm/arch7em-bad.d: Rename to ...
* testsuite/gas/arm/arch7em-bad-1.d: This.
* testsuite/gas/arm/arch7em-bad-2.d: New file.
* testsuite/gas/arm/arch7em-bad-3.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
* testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise.
* testsuite/gas/arm/attr-march-armv8m.main.dsp.d: Likewise.

include/
* elf/arm.h (Tag_DSP_extension): Define.

ld/
* testsuite/ld-arm/arm-elf.exp (EABI attribute merging 10 (DSP)): New
test.
* testsuite/ld-arm/attr-merge-10b-dsp.s: New file.
* testsuite/ld-arm/attr-merge-10-dsp.attr: Likewise.

Allow extension availability to depend on several architecture bits

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

gas/
* config/tc-arm.c (struct arm_option_extension_value_table): Make
allowed_archs an array with 2 entries.
(ARM_EXT_OPT): Adapt to only fill the first entry of allowed_archs.
(ARM_EXT_OPT2): New macro filling the two entries of allowed_archs.
(arm_extensions): Use separate entries in allowed_archs when several
archs are allowed to use an extension and change ARCH_ANY in
ARM_ARCH_NONE in allowed_archs.
(arm_parse_extension): Check that, for each allowed_archs entry, all
bits are set in the current architecture, ignoring ARM_ANY entries.
(s_arm_arch_extension): Likewise.

include/
* arm.h (ARM_FSET_CPU_SUBSET): Define macro.

Add support for ARMv8-M security extensions instructions

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

gas/
* config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not
shared with a non M profile architecture.
(do_rn): New function.
(known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather
than arm_ext_v8m.
(v7m_psrs): Add ARMv8-M security extensions new special registers.
(insns): Add ARMv8-M Security Extensions instructions.
(aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of
arm_ext_v8m_m to decide the profile and the Thumb ISA.
* testsuite/gas/arm/archv8m-cmse.s: New file.
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise..
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
* testsuite/gas/arm/any-cmse.d: Likewise.
* testsuite/gas/arm/any-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.

include/
* opcode/arm.h (ARM_EXT2_V8M_MAIN): new feature bit.
(ARM_AEXT2_V8M_MAIN): New architecture extension feature set.
(ARM_ARCH_V8M_MAIN): Use ARM_AEXT2_V8M_MAIN instead of ARM_AEXT2_V8M
for the high core bits.

opcodes/
* arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M
Mainline Security Extensions instructions.
(thumb_opcodes): Add entries for narrow ARMv8-M Security
Extensions instructions.
(thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions
instructions.
(psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions
special registers.

binutils/doc: Update documentation for nm --size-sort

The documentation for 'nm --size-sort' is out of step with the code, the
special handling for ELF is not mentioned in the documentation, and
could cause confusion to a user.

binutils/ChangeLog:

* doc/binutils.texi (nm): Update description of --size-sort.

2016-05-10  Christophe Lyon  <christophe.lyon@linaro.org>

* ld/testsuite/ld-elf/flags1.d (xfail): Remove *-*-nacl*".

PR 20059 _bfd_elf_copy_link_hash_symbol_type segfault

PR ld/20059
* elfxx-target.h (bfd_elfNN_bfd_copy_link_hash_symbol_type):
Define as _bfd_generic_copy_link_hash_symbol_type when using
generic hash table.

Automatic date update in version.in

Fix for PR gold/19987.

Fix seg fault objdumping a corrupt binary with an invalid sh_link field.

PR binutils/20063
* elf.c (bfd_elf_get_elf_syms): Check for out of range sh_link
field before accessing sections array.

* readelf.c (get_32bit_section_headers): Warn if an out of range
sh_link or sh_info field is encountered.
(get_64bit_section_headers): Likewise.

[ARM/STM32L4XX] PR 20030: --fix-stm32l4xx-629360 fails to create vldm/vpop veneers for double-precision registers

bfd/
PR ld/20030
* elf32-arm.c (is_thumb2_vldm): Account for T1 (DP) encoding.
(stm32l4xx_need_create_replacing_stub): Rename ambiguous nb_regs
to nb_words.
(create_instruction_vldmia): Add is_dp to disambiguate SP/DP
encoding.
(create_instruction_vldmdb): Likewise.
(stm32l4xx_create_replacing_stub_vldm): is_dp detects DP encoding,
uses it to re-encode.

ld/
PR ld/20030
* testsuite/ld-arm/arm-elf.exp: Run new stm32l4xx-fix-vldm-dp
tests. Fix misnamed stm32l4xx-fix-all.
* testsuite/ld-arm/stm32l4xx-fix-vldm-dp.s: New tests for multiple
loads with DP registers.
* testsuite/ld-arm/stm32l4xx-fix-vldm-dp.d: New reference file.
* testsuite/ld-arm/stm32l4xx-fix-vldm.s: Add missing comment.
* testsuite/ld-arm/stm32l4xx-fix-all.s: Add tests for multiple
loads with DP registers.
* testsuite/ld-arm/stm32l4xx-fix-all.d: Update reference.

Revert accidental commit.

PR 19938
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Revert accidental
commit.

Update section merge test.

* testsuite/ld-elf/flags1.d (readelf): Dump section header instead
program headers.
(xfail): Remove avr-*-*.
Update regex to check the section flags.
* testsuite/ld-elf/merge.d (xfail): Remove avr-*-*.