staging: iio: remove duplicate case labels

Otherwise, compiling iio_event_monitor program fails:

io_event_monitor.c: In function ‘event_is_known’:
iio_event_monitor.c:125:2: error: duplicate case value
  case IIO_MOD_LIGHT_BOTH:
  ^
iio_event_monitor.c:121:2: error: previously used here
  case IIO_MOD_LIGHT_BOTH:

Fixes: da4db94 (iio staging: add recently added modifiers to iio_event_monitor)
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: ad9832: Remove redundant check

'val' is unsigned and cannot be negative.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: make hid_sensor_get_reporting_interval static

This fixes the following sparse warning:

  CHECK   drivers/iio/common/hid-sensors/hid-sensor-attributes.c
drivers/iio/common/hid-sensors/hid-sensor-attributes.c:346:5: warning:
symbol 'hid_sensor_get_reporting_interval' was not declared. Should it be static?

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st_sensors: add device tree bindings

This adds some basic, simple device tree bindings to the STMicro
MEMS sensor drivers.

Cc: devicetree@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st_sensors: get platform data from device tree

Currently the STMicroelectronics sensors only support one single
platform data item: configuration of the DRDY (data ready) pin
for a particular design. Augment the core to prioritize and take
this information from the device tree if the parent device has an
assigned device node, else fall back to passed in platform data
(usually the default data).

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: adis16480 switch sampling frequency attr to core support

By using the info_mask_shared_by_all element of the channel spec, access
to the sampling frequency becomes available to in kernel users of the
driver.  It also shortens and simplifies the code.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

iio: imu: adis16400 switch sampling frequency attr to core support.

By using the info_mask_shared_by_all element of the channel spec, access
to the sampling frequency becomes available to in kernel users of the
driver.  It also shortens and simplifies the code.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

iio: adis: Switch sampling frequency attr to core support.

By using the info_mask_shared_by_all element of the channel spec, acce
to the sampling frequency becomes available to in kernel users of the
driver.  It also shortens and simplifies the code.

This particular conversion was made more complicated by the shared library
and the fact that a number of the drivers do not actually have support for
setting or reading the sampling frequency.  The hardware, in those cases
investigated supports it. It's just never been implemented.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

iio: gyro: itg3200 switch sampling frequency attr to core support.

By using the info_mask_shared_by_all element of the channel spec, access
to the sampling frequency becomes available to in kernel users of the
driver.  It also shortens and simplifies the code a little.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Cc: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Cc: Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
Cc: Christian Strobel <christian.strobel@iis.fraunhofer.de>

iio:st sensors: remove custom sampling frequence attribute in favour of core support.

This allows in kernel client drivers to access this

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>

iio: Add driver for AMS/TAOS tcs3414 digital color sensor

16-bit digital color sensor with red, green, blue and clear channel

datasheet: http://ams.com/eng/content/download/250258/975997/TCS3414_Datasheet_EN_v1.pdf

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add Intersil isl29125 digital color light sensor driver

datasheet: http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29125.pdf

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Fix compilation warning

Move the 'static' keyword to beginning of definition to silence the
following compilation warning:
drivers/iio/common/hid-sensors/hid-sensor-attributes.c:34:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: xilinx-xadc: Remove unused variable

'offset’ is not used in the function. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: ad5686: Remove redundant variable

‘regdone’ is not used in the function. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: ad5504: Remove redundant variable

By re-arranging the code, 'ret' can be removed from this
function.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: ad5624r_spi: Remove redundant variable

By re-arranging the code, 'ret' can be removed from this
function.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adis16400: Remove unused variable

'rx' is not used in this function. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: cxt1e1: remove driver

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore. This can be reverted if someone
wants to work to fix the remaining issues the driver has.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Bob Beers <bob.beers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgrp: remove driver

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore. This can be reverted if someone
wants to work to fix the remaining issues the driver has.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: remove driver

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore. This can be reverted if someone
wants to work to fix the remaining issues the driver has.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2(5): remove driver

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Henk de Groot <pe1dnn@amsat.org>
Cc: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: use lower case for variable names for consistency

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: use int instead of u32 whenever makes sense

This patch addresses the following issues:
- Use int instead of u32 whenever makes sense
- Turn extract_qos_list() in gdm_qos.c, which previously always returned
  0, into a void function.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: use bool instead of custom-defined BOOLEAN

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: return -EINVAL instead of BUG_ON for invalid data length

This patch changes gdm_usb_send() and gdm_sdio_send() to return -EINVAL instead
of calling BUG_ON if an invalid data length is passed to the functions.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc_driver.c: code style fixes

Simple code style fixes:
 - "if(" -> "if ("
 - "switch(" -> "switch ("
 - move one open brace to the line of the declaration instead of
   its own line
 - remove trailing whitespace

Signed-off-by: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192ee: fixed tab coding style issue in base.h

Fixes the tab error found in base.h, reported by checkpatch.pl tool

Signed-off-by: Morgan Stuart <morgansstuartdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8821ae/rtl8821ae/hal_btc.c: remove unnecessary null test before kfree

Fix checkpatch warning:
WARNING: kfree(NULL) is safe this check is probably not required

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng/hfa384x_usb.c: add blank line after declarations

This patch fixes the following checkpatch.pl issues in hfa384x_usb.c:
WARNING: Missing a blank line after declarations

Signed-off-by: Quentin Lee <lee.rhapsody@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: api-ni.c: fixed sparse warnings

- this fixes few sparse warnings for missing static in functions:

drivers/staging/lustre/lnet/lnet/api-ni.c:63:6: warning: symbol 'lnet_get_routes' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:69:6: warning: symbol 'lnet_get_networks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:93:1: warning: symbol 'lnet_init_locks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:102:1: warning: symbol 'lnet_fini_locks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:180:6: warning: symbol 'lnet_assert_wire_constants' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:273:7: warning: symbol 'lnet_find_lnd_by_type' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:419:1: warning: symbol 'lnet_create_interface_cookie' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:450:1: warning: symbol 'lnet_res_container_cleanup' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:494:1: warning: symbol 'lnet_res_container_setup' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:612:1: warning: symbol 'lnet_prepare' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:917:1: warning: symbol 'lnet_shutdown_lndnis' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:1034:1: warning: symbol 'lnet_startup_lndnis' was not declared. Should it be static?

Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/lustre/lustre/llite: sparse warning corrections

Sparse warning corrections: NULL-pointers as NULL instead of static 0's.

Signed-off-by: Sami Laine <laine.j.sami@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Lines shortened in download_ddr_settings()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Lines shortened in ddr_init()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Moved doubled if-block

This patch moves the doubled if block inside the retval-checking one
level up.

As the if-else-block it was in is now a one-statement if-else block,
I removed the braces from it.

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fixed indention for inner if-block

The inner if-statement was aligned just like the outer one. Why?

This indention was introduced by

    f34c488c3894968e8cdbdc3b1ed617d78315cace

which is a indention-fix patch itself. That's why I'm curious about it.

I did not merge these nested if-statements, as I don't know if I'm
destroying logical seperated checks with it.

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Indentation fixes

This patch fixes some indentation errors, where multi-line statements
where not indented.

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Misc whitespace fixes

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: device_init_registers move out vnt_set_bss_mode

Move to vnt_add_interface and allow to refresh at the start
of every software scan in vnt_sw_scan_start

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: set BBvSetVGAGainOffset inside vnt_set_bss_mode

vnt_set_bss_mode changes the state of abyBBVGA so move
BBvSetVGAGainOffset to the function.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove vnt_add_basic_rate

The driver never sets basic rate any more so remove function.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code remove RXvWorkItem and RXvFreeRCB

Remove work_struct and queue variables

Remove EnqueueRCB and DequeueRCB macros

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove rx handing from RXvWorkItem

In s_nsBulkInUsbIoCompleteRead reuse or reallocate sb_buff and resubmit
urb.

In device_alloc_bufs allocate memory to rcb individually and
call PIPEnsBulkInUsbRead to submit the urbs

Change handling to free rcb in device_free_rx_bufs

Remove calls to workqueue.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: vnt_tx_packet remove first assignment of time_stamp.

This is assigned later in function and should have been removed in
an out-of-tree merge.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx replace wFragCtl with frag_ctl.

Use base type to __le16 and do endian correction.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: rxtx struct vnt_mic_hdr change tsc_47_16/tsc_15_0

Replace with ccmp_pn with size of IEEE80211_CCMP_PN_LEN(6)

memcpy the struct ieee80211_key_seq -> ccmp.pn onto ccmp_pn
removing the need for endian conversion.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: cleanup mite_unsetup()

This function is only called by comedi drivers during the (*detach) of the
driver. After it is called mite_free() is always called to kfree the allocated
mite_struct pointer.

Rename this function to mite_detach() and merge the kfree() from mite_free()
into it.

Remove the unnecessary clearing of the mite variables since the mite pointer
is going to be kfree()'d anyway.

The mite_detach() function checks if the pointer is valid so remove the
unnecessary checks in the callers.

The check can also be removed in ni_660x since the ni_660x_free_mite_rings()
function does not actually need the 'mite' pointer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite.h: remove mite_device()

This inline function is not used. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite.h: remove mite_irq()

This inline function simply returns the 'irq' of the struct pci_dev pointer
that is stored in struct mite_struct. This pci_dev pointer is the same as
the one that is already available in the (*auto_attach) functions where
mite_irq() is used.

Use the pci_dev pointer directly to get the irq and remove the unnecessary
inline function to remove the indirection.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: remove ATMIO and PCIMIO defines

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_cs: remove ATMIO and PCIMIO defines

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: remove ATMIO and PCIMIO defines

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: remove DRV_NAME define

This define is not used ny the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_stc.h: the boardinfo 'name' should be first

By convention, the first member of the boardinfo is a 'const char *' to
the board name, especially for those comedi drivers that rely on the
comedi core to set dev->board_ptr to the entry matching the board name
when doing a legacy (*attach) to a comedi driver.

Modify the ni_board_struct appropriately for consistency, although the
board name is only used for informational purposes by this driver (only
the driver name is matched by the comedi core).

For aesthetics, also move the members in the boardinfo declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: tidy up the boardinfo

For aesthetics, add some whitespace to the boardinfo declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_cs: remove NI_SIZE define

This define is not used by the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: remove NI_SIZE define

This define is only used in the comedi_request_region() to specify the
size of the region. Remove the define and just open code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: remove '= 0' boardinfo data

Remove all the boardinfo data the is set to '0'. They will default
to that when the boardinfo is declared.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common.c: remove IRQ_POLARITY defines

Pass the irq_polarity to ni_E_init() and remove the defines.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common drivers: remove NI_E_IRQ_FLAGS defines

These defines are only used in the request_irq() calls. Remove them
and just open code the values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common.c: remove interrupt_pin() macros

Pass the 'interrupt_pin' to ni_E_init() and remove the macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: remove forward declarations

Move some functions to avoid the need for the forward declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.17b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new drivers and cleanups for IIO in the 3.17 cycle.

New drivers
* mcp4902, mcp4912 and mcp4922 SPI DAC driver.
* max1027, max1029 and max1031 SPI ADC driver.

Cleanups
* cm32181 - use devm APIs to simplify error paths.
* ak8975 - use devm APIs to simplify error paths.
* ad9850 - drop some unused defines and an unnecessary goto.
* hmc5843 - add missing devices to the device id table and the documentation.
* ad9832 - small formatting cleanups.
* sca3000 - hide direct use of the stufftoread element by adding a
    data_available function.  This is a precursor for the addition of buffer
    watermarks to the subsystem but stands as a good cleanup on its own.

iio: staging: sca3000: hide stufftoread logic

Change sca3000_ring implementation so that it exports a data_available
function to iio.

Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: Coding style issues fix.

Fix some little style issues in drivers/staging/iio/frequency/ad9832.c .
This is my latest task of the eudyptula challenge (third attempt!)

Signed-off-by: Federico Di Pierro <nierro92@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: magnetometer: ak8975: Use devm_* APIs

This patch use devm_* APIs make driver simpler.

Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Documentation: iio: Extend documentation for hmc5843 bindings.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: hmc5843: Add all available models to device tree id table.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: iio: ad9850.c: code cleanup

checkpath.pl was complaining about value_mask:
ERROR: Macros with complex values should be enclosed in parenthesis

I fixed this by simply removing it since it's not used (as well as another
macro).  Got rid of the un-necessary error_ret label as well.

Signed-off-by: Guillaume Morin <guillaume@morinfr.org>
Reported-by: Michael Welling <mwelling@ieee.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: winbond: remove driver

The driver hasn't been cleaned up and nobody is working to do so, so
remove it.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: add support of the max1027

This driver add partial support of the
maxim 1027/1029/1031. Differential mode is not
supported.

It was tested on armadeus apf27 board.

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: bcm: nvm.c: Cleaning up check unsigned is less than zero

Remove checking if a unsigned int is less than zero

This was found using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: hostmibs.c: Shortened lines

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: replaced member accessing with variable for readability

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Reviewed-by: Jake Edge <jake@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Added missing blank line after declarations

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replaced member accssing with variable

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Whitespace for indentation fixed

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: line length fixed

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Line length cleanup

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Shortened some lines in select_alternate_setting_for_highspeed_modem()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Outsourced selecting of alternate setting

This patch outsources a chunk of code which is for selecting an
alternate setting for highspeed modem into a new function.

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Merged some lines which got shorter by the latest patch

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replaced member accessing with variable in InterfaceAdapterInit()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Replaced member accessing with variable in device_run()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: replaced member accessing by variable

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Shortened some lines

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Replaced nested ifs with logical AND concatenation

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Replaced member accessing by variable

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Replaced member accessing by variable

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Replaced doubled if-check by logical OR in one check

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Replaced time selecting ifelse with ternary operator

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: More variable names refactored

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Refactored line lengths

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Removed dead code

This patch removes the never-entered else-block inside
blink_in_normal_bandwidth(). The condition of the preceding if statement
is always true.

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Refactored variable name

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Outsourced code chunk

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Replaced member accessing

This patch replaces member accessing with a variable in
BcmGetGPIOPinInfo().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Simplified nested if conditions

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.{c,h}: Fixed macro

This patch fixes the TURN_{ON,OFF}_LED() macros by adding the adapter as
parameter.

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: led_control.c: Outsourced adapter driver state handling

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>