Sebastian Andrzej Siewior [Fri, 20 Feb 2015 22:17:01 +0000 (23:17 +0100)] 
perf data: Add a 'perf' prefix to the generic fields
Some of the tracers bring their own id or pid fields and we can end up
having two of them. This patch adds a "perf_" prefix to the 'generic'
fields so we avoid a clash of the member names.
The change is visible in the babeltrace output:
Before:
$ babeltrace ./ctf-data/
[03:19:13.
962131936] (+0.
000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.
962133732] (+0.
000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
...
Now:
$ babeltrace ./ctf-data/
[03:19:13.
962131936] (+0.
000001935) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 8 }
[03:19:13.
962133732] (+0.
000001796) cycles: { }, { perf_ip = 0xFFFFFFFF8105443A, perf_tid = 20714, perf_pid = 20714, perf_period = 114 }
...
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-5-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 20 Feb 2015 22:17:00 +0000 (23:17 +0100)] 
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.
962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.
962130001] (+0.
000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.
962131936] (+0.
000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.
962133732] (+0.
000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.
962135557] (+0.
000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.
962137627] (+0.
000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.
962161091] (+0.
000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.
962517569] (+0.
000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period =
1325731 }
[03:19:13.
969518008] (+0.
007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period =
1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 20 Feb 2015 22:16:59 +0000 (23:16 +0100)]
perf tools: Add new 'perf data' command
Adding new 'perf data' command to provide operations over data files.
The 'perf data convert' sub command is coming in following patch, but
there's possibility for other useful commands like 'perf data ls' (to
display perf data file in directory in ls style).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-3-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 20 Feb 2015 22:16:58 +0000 (23:16 +0100)]
perf tools: Add feature check for libbabeltrace
Adding feature check for babeltrace library [1], which will be used for
perf data file CTF [2] conversion in following patches.
The babeltrace library is now automatically detected as standard
feature. It's possible to specify LIBBABELTRACE_DIR make variable to
specify location of installed libbabeltrace, like:
$ make LIBBABELTRACE_DIR=/opt/libbabeltrace/
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libbabeltrace: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... DWARF post unwind library: libunwind
NOTE The installation of the [1] to to used by above make:
$ git clone git://git.efficios.com/babeltrace.git
$ cd babeltrace
$ vim README
$ ./bootstrap
$ ./configure --prefix=/opt/libbabeltrace
$ make prefix=/opt/libbabeltrace
$ sudo make install prefix=/opt/libbabeltrace
Please make sure that the /opt/libbabeltrace/lib directory is in your
LD_LIBRARY_PATH:
$ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib
[1] babeltrace - http://www.efficios.com/babeltrace
[2] Common Trace Format - http://www.efficios.com/ctf
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ Added missing babeltrace build instructions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Tue, 24 Feb 2015 23:13:40 +0000 (15:13 -0800)] 
perf record: Support recording running/enabled time
Add an option to perf record to record running/enabled time for read
events, similar to what stat does.
This is useful to understand multiplexing problems.
Right now the report support is not great, but at least report -D
already supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1424819620-16043-1-git-send-email-andi@firstfloor.org
[ Fixed the Documentation entry to match the OPT_BOOLEAN one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Feb 2015 20:20:31 +0000 (17:20 -0300)] 
perf tools: Print the thread's tid on PERF_RECORD_COMM events when -D is asked
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fmto8ft6jrtwz09dxn5d4z8w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Feb 2015 18:35:55 +0000 (15:35 -0300)]
perf trace: Dump stack on segfaults
[root@ssdandy ~]# perf trace --filter-pids 16348
0.000 ( 0.000 ms): tuned/1027 ... [continued]: select()) = 0 Timeout
793.770 ( 0.000 ms): lsmd/895 ... [continued]: select()) = 0 Timeout
793.775 (793.724 ms): tuned/1027 select(tvp: 0x7f7655556e50) ...
perf: Segmentation fault
Obtained 15 stack frames.
perf(dump_stack+0x2e) [0x4ed330]
perf(sighandler_dump_stack+0x2e) [0x4ed40f]
/lib64/libc.so.6(+0x35640) [0x7fa2d5b69640]
perf() [0x4c2d35]
perf(machine__findnew_thread+0x39) [0x4c2ed6]
perf() [0x454a4d]
perf() [0x455f87]
perf() [0x456556]
perf(cmd_trace+0xa7e) [0x4580af]
perf() [0x4867bd]
perf() [0x486a1c]
perf() [0x486b68]
perf(main+0x23b) [0x486ec9]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7fa2d5b55af5]
perf() [0x41bd91]
[ root@ssdandy ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v38cbxcnm2yf5qn9u4y4n9ab@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 24 Feb 2015 18:34:23 +0000 (15:34 -0300)]
perf tools: Introduce dump_stack signal helper
To use in stdio based tools, like 'trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-79kjmerlw6d88csyx1afzwvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 22 Feb 2015 21:52:47 +0000 (13:52 -0800)]
perf ordered_events: Stop using tool->ordered_events
To figure out if ordered_events are being used when doing a flush
operation, it is enough to check if there were in fact some events
queued, i.e. look at oe->nr_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1c5r404vy766kt5nflv88uag@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 18:08:51 +0000 (15:08 -0300)]
perf session: Remove perf_session from dump_event
All it wants is session->evlist.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6w9663gka3jb1j1rfxxd5jcq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 18:05:28 +0000 (15:05 -0300)]
perf session: Remove perf_session from some deliver event routines
Further untangling perf_session from plain event delivery routines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cvz8e6pwyogs4w14582iis9w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 17:57:13 +0000 (14:57 -0300)]
perf session: Remove perf_session from warn_errors signature
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pxxm1liohog3d6i826x8sud8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 17:50:11 +0000 (14:50 -0300)]
perf evlist: Adopt events_stats from perf_session
For tools that don't deal with perf.data files, thus do not need to
use perf_session.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kglq67gvauq9tak02a4se00r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 14 Feb 2015 17:26:15 +0000 (14:26 -0300)]
perf session: Remove wrappers to machines__find
Start to untangle session from delivering samples, as there are
tools that want to use ordered_events and don't use perf_session at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rn4pk3pjxd78sgzrkn19tktp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 20:10:29 +0000 (12:10 -0800)]
perf trace: Separate routine that handles an event from the one that reads it
Because we need to use ordered_events in some cases, so we will need to
first have them in a queue, order that queue, and then process the
event.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cmkw9zgoh0z4r218957ftp1a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 19:49:10 +0000 (11:49 -0800)]
perf trace: Add man page entry for --event
Forgot to do it when adding the feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mx152b6x9cgknhw91vsyjlnd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 19:36:52 +0000 (11:36 -0800)]
perf trace: Introduce --filter-pids
When tracing in X we get event loops due to the tracing activity, i.e.
updates to a gnome-terminal that generate syscalls for X.org, etc.
To get a more useful view of what is happening, syscall wise, system
wide, we need to filter those, like in:
# ps ax|egrep '981|2296|1519' | grep -v egrep
981 tty1 Ss+ 5:40 /usr/bin/Xorg :0 -background none ...
1519 ? Sl 2:22 /usr/bin/gnome-shell
2296 ? Sl 4:16 /usr/libexec/gnome-terminal-server
#
# trace -e write --filter-pids 981,2296,1519
0.385 ( 0.021 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 136) = 136
0.922 ( 0.014 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 140) = 140
5006.525 ( 0.029 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 136) = 136
5007.235 ( 0.023 ms): goa-daemon/2061 write(fd: 1</dev/null>, buf: 0x7fbeb017b000, count: 140) = 140
5177.646 ( 0.018 ms): rtkit-daemon/782 write(fd: 5<anon_inode:[eventfd]>, buf: 0x7f7eea70be88, count: 8) = 8
8314.497 ( 0.004 ms): gsd-locate-poi/2084 write(fd: 5<anon_inode:[eventfd]>, buf: 0x7fffe96af7b0, count: 8) = 8
8314.518 ( 0.002 ms): gsd-locate-poi/2084 write(fd: 5<anon_inode:[eventfd]>, buf: 0x7fffe96af0e0, count: 8) = 8
^C#
When this option is used the tracer pid is also filtered.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f5qmiyy7c0uxdm21ncatpeek@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 19:33:47 +0000 (11:33 -0800)]
perf evlist: Introduce set_filter_pids method
We need to filter multiple pids in trace, i.e. trace itself,
gnome-terminal, X.org, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-frtpkg7qapqwf7asa35wf8am@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 18:15:21 +0000 (10:15 -0800)]
perf trace: Filter out the trace pid when no threads are specified
To avoid tracing the tracer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-shmwd1khzpaobr3i0j1ygapg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 21 Feb 2015 18:09:55 +0000 (10:09 -0800)]
perf evlist: Introduce set_filter_pid method
To filter out events for a certain pid, for instance, when tracing
system wide, so that the tracer itself doesn't creates an event loop.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-byoia9dzu4gmkdv87etnd9zf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 20 Feb 2015 05:51:50 +0000 (21:51 -0800)]
perf trace: Only insert blank duration bracket when tracing syscalls
When printing just events, i.e. '--no-sys --ev some:events' it makes no
sense to waste screen space.
Before:
# trace --no-sys --ev probe:*
84481.704 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/services")
84481.892 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/services")
84482.230 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/resolv.conf")
84482.481 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/hosts")
85097.725 ( ): probe:vfs_getname:(
ffffffff811ed023) pathname="/root"
#
After:
# trace --no-sys --ev probe:*
0.000 probe:vfs_getname:(
ffffffff811ed023) pathname="/root")
1.711 probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/localtime")
2.103 probe:vfs_getname:(
ffffffff811ed023) pathname="/etc/localtime")
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jhryxgnam8zecq0q0wsy6pyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 18 Feb 2015 18:14:54 +0000 (19:14 +0100)] 
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- No need to explicitely enable evsels for workload started from perf, let it
be enabled via perf_event_attr.enable_on_exec, removing some events that take
place in the 'perf trace' before a workload is really started by it.
(Arnaldo Carvalho de Melo)
- Fix to handle optimized not-inlined functions in 'perf probe' (Masami Hiramatsu)
- Update 'perf probe' man page (Masami Hiramatsu)
- 'perf trace': Allow mixing with tracepoints and suppressing plain syscalls
(Arnaldo Carvalho de Melo)
Infrastructure changes:
- Introduce {trace_seq_do,event_format_}_fprintf functions to allow
a default tracepoint field list printer to be used in tools that allows
redirecting output to a file. (Arnaldo Carvalho de Melo)
- The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h, do it to fix the build in some
systems (Josh Boyer)
- Cleanups in 'perf buildid-cache' (Masami Hiramatsu)
- Fix dso cache test case (Namhyung Kim)
- Do Not rely on dso__data_read_offset() to open DSO (Namhyung Kim)
- Make perf aware of tracefs (Steven Rostedt).
- Fix build by defining STT_GNU_IFUNC for glibc 2.9 and older (Vinson Lee)
- AArch64 symbol resolution fixes (Victor Kamensky)
- Kconfig beachhead (Jiri Olsa)
- Simplify nr_pages validity (Kaixu Xia)
- Fixup header positioning in 'perf list' (Yunlong Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 14 Jan 2015 13:15:39 +0000 (14:15 +0100)] 
perf, powerpc: Fix up flush_branch_stack() users
The recent LBR rework for x86 left a stray flush_branch_stack() user in
the PowerPC code, fix that up.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Mon, 5 Jan 2015 18:23:05 +0000 (13:23 -0500)] 
perf tools: Construct LBR call chain
LBR call stack only has user-space callchains. It is output in the
PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's
still in the form of PERF_SAMPLE_CALLCHAIN.
The perf tool has to handle both data sources to construct a
complete callstack.
For the "perf report -D" option, both lbr and fp information will be
displayed.
A new call chain recording option "lbr" is introduced into the perf
tool for LBR call stack. The user can use --call-graph lbr to get
the call stack information from hardware.
Here are some examples.
When profiling bc(1) on Fedora 19:
echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd
If enabling LBR, perf report output looks like:
50.36% bc bc [.] bc_divide
|
--- bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
33.66% bc bc [.] _one_mult
|
--- _one_mult
bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
7.62% bc bc [.] _bc_do_add
|
--- _bc_do_add
|
|--99.89%-- 0x2000186a8
--0.11%-- [...]
6.83% bc bc [.] _bc_do_sub
|
--- _bc_do_sub
|
|--99.94%-- bc_add
| execute
| run_code
| yyparse
| main
| __libc_start_main
| _start
--0.06%-- [...]
0.46% bc libc-2.17.so [.] __memset_sse2
|
--- __memset_sse2
|
|--54.13%-- bc_new_num
| |
| |--51.00%-- bc_divide
| | execute
| | run_code
| | yyparse
| | main
| | __libc_start_main
| | _start
| |
| |--30.46%-- _bc_do_sub
| | bc_add
| | execute
| | run_code
| | yyparse
| | main
| | __libc_start_main
| | _start
| |
| --18.55%-- _bc_do_add
| bc_add
| execute
| run_code
| yyparse
| main
| __libc_start_main
| _start
|
--45.87%-- bc_divide
execute
run_code
yyparse
main
__libc_start_main
_start
If using FP, perf report output looks like:
echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd
50.49% bc bc [.] bc_divide
|
--- bc_divide
33.57% bc bc [.] _one_mult
|
--- _one_mult
7.61% bc bc [.] _bc_do_add
|
--- _bc_do_add
0x2000186a8
6.88% bc bc [.] _bc_do_sub
|
--- _bc_do_sub
0.42% bc libc-2.17.so [.] __memcpy_ssse3_back
|
--- __memcpy_ssse3_back
If using LBR, perf report -D output looks like:
3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0
... LBR call chain: nr:8
..... 0:
fffffffffffffe00
..... 1:
0000000000408e50
..... 2:
000000000040a458
..... 3:
000000000040562e
..... 4:
0000000000408590
..... 5:
00000000004022c0
..... 6:
00000000004015dd
..... 7:
0000003d1cc21b43
... FP chain: nr:2
..... 0:
fffffffffffffe00
..... 1:
0000000000408ea8
... thread: bc:9748
...... dso: /usr/bin/bc
The LBR call stack has the following known limitations:
- Zero length calls are not filtered out by the hardware
- Exception handing such as setjmp/longjmp will have calls/returns not
match
- Pushing different return address onto the stack will have
calls/returns not match
- If callstack is deeper than the LBR, only the last entries are
captured
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Mon, 5 Jan 2015 18:23:04 +0000 (13:23 -0500)]
perf tools: Enable LBR call stack support
Currently, there are two call chain recording options, fp and dwarf.
Haswell has a new feature that utilizes the existing LBR facility to
record call chains. Kernel side LBR support code provides this as a
third option to record call chains. This patch enables the lbr call
stack support on the tooling side.
LBR call stack has some limitations:
- It reuses current LBR facility, so LBR call stack and branch record
can not be enabled at the same time.
- It is only available for user-space callchains.
However, it also offers some advantages:
- LBR call stack can work on user apps which don't have frame-pointers
or dwarf debug info compiled. It is a good alternative when nothing
else works.
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1420482185-29830-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 5 Nov 2014 09:36:45 +0000 (10:36 +0100)]
perf/x86/intel: Expose LBR callstack to user space tooling
With LBR call stack feature enable, there are three callchain options.
Enable the 3rd callchain option (LBR callstack) to user space tooling.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/20141105093759.GQ10501@worktop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:11 +0000 (21:56 -0500)] 
perf/x86/intel: Discard zero length call entries in LBR call stack
"Zero length call" uses the attribute of the call instruction to push
the immediate instruction pointer on to the stack and then pops off
that address into a register. This is accomplished without any matching
return instruction. It confuses the hardware and make the recorded call
stack incorrect.
We can partially resolve this issue by: decode call instructions and
discard any zero length call entry in the LBR stack.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-16-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:10 +0000 (21:56 -0500)]
perf/x86/intel: Disable FREEZE_LBRS_ON_PMI when LBR operates in callstack mode
LBR callstack is designed for PEBS, It does not work well with
FREEZE_LBRS_ON_PMI for non PEBS event. If FREEZE_LBRS_ON_PMI is set for
non PEBS event, PMIs near call/return instructions may cause superfluous
increase/decrease of LBR_TOS.
This patch modifies __intel_pmu_lbr_enable() to not enable
FREEZE_LBRS_ON_PMI when LBR operates in callstack mode. We currently
don't use LBR callstack to capture kernel space callchain, so disabling
FREEZE_LBRS_ON_PMI should not be a problem.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-15-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:08 +0000 (21:56 -0500)]
perf/x86/intel: Re-organize code that implicitly enables LBR/PEBS
Make later patch more readable, no logic change.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-13-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:06 +0000 (21:56 -0500)]
perf: Simplify the branch stack check
Use event->attr.branch_sample_type to replace
intel_pmu_needs_lbr_smpl() for avoiding duplicated code that
implicitly enables the LBR.
Currently, branch stack can be enabled by user explicitly requesting
branch sampling or implicit branch sampling to correct PEBS skid.
For user explicitly requested branch sampling, the branch_sample_type
is explicitly set by user. For PEBS case, the branch_sample_type is also
implicitly set to PERF_SAMPLE_BRANCH_ANY in x86_pmu_hw_config.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-11-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:05 +0000 (21:56 -0500)]
perf/x86/intel: Save/restore LBR stack during context switch
When the LBR call stack is enabled, it is necessary to save/restore
the LBR stack on context switch. The solution is saving/restoring
the LBR stack to/from task's perf event context.
The LBR stack is saved/restored only when there are events that use
the LBR call stack. If no event uses LBR call stack, the LBR stack
is reset when task is scheduled in.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-10-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:04 +0000 (21:56 -0500)]
perf/x86/intel: Track number of events that use the LBR callstack
When enabling/disabling an event, check if the event uses the LBR
callstack feature, adjust the LBR callstack usage count accordingly.
Later patch will use the usage count to decide if LBR stack should
be saved/restored.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-9-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:03 +0000 (21:56 -0500)]
perf/x86/intel: Allocate space for storing LBR stack
When the LBR call stack is enabled, it is necessary to save/restore
the LBR stack on context switch. We can use pmu specific data to
store LBR stack when task is scheduled out. This patch adds code
that allocates the pmu specific data.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-8-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:02 +0000 (21:56 -0500)]
perf: Always switch pmu specific data during context switch
If two tasks were both forked from the same parent task, Events in
their perf task contexts can be the same. Perf core may leave out
switching the perf event contexts.
Previous patch inroduces pmu specific data. The data is for saving
the LBR stack, it is task specific. So we need to switch the data
even when context switch is optimized out.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-7-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:01 +0000 (21:56 -0500)]
perf: Add pmu specific data for perf task context
Introduce a new flag PERF_ATTACH_TASK_DATA for perf event's attach
stata. The flag is set by PMU's event_init() callback, it indicates
that perf event needs PMU specific data.
The PMU specific data are initialized to zeros. Later patches will
use PMU specific data to save LBR stack.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-6-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:56:00 +0000 (21:56 -0500)]
perf/x86/intel: Add basic Haswell LBR call stack support
Haswell has a new feature that utilizes the existing LBR facility to
record call chains. To enable this feature, bits (JCC, NEAR_IND_JMP,
NEAR_REL_JMP, FAR_BRANCH, EN_CALLSTACK) in LBR_SELECT must be set to 1,
bits (NEAR_REL_CALL, NEAR-IND_CALL, NEAR_RET) must be cleared. Due to
a hardware bug of Haswell, this feature doesn't work well with
FREEZE_LBRS_ON_PMI.
When the call stack feature is enabled, the LBR stack will capture
unfiltered call data normally, but as return instructions are executed,
the last captured branch record is flushed from the on-chip registers
in a last-in first-out (LIFO) manner. Thus, branch information relative
to leaf functions will not be captured, while preserving the call stack
information of the main line execution path.
This patch defines a separate lbr_sel map for Haswell. The map contains
a new entry for the call stack feature.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-5-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:55:59 +0000 (21:55 -0500)]
perf/x86/intel: Use context switch callback to flush LBR stack
Previous commit introduces context switch callback, its function
overlaps with the flush branch stack callback. So we can use the
context switch callback to flush LBR stack.
This patch adds code that uses the flush branch callback to
flush the LBR stack when task is being scheduled in. The callback
is enabled only when there are events use the LBR hardware. This
patch also removes all old flush branch stack code.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-4-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:55:58 +0000 (21:55 -0500)]
perf: Introduce pmu context switch callback
The callback is invoked when process is scheduled in or out.
It provides mechanism for later patches to save/store the LBR
stack. For the schedule in case, the callback is invoked at
the same place that flush branch stack callback is invoked.
So it also can replace the flush branch stack callback. To
avoid unnecessary overhead, the callback is enabled only when
there are events use the LBR stack.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: eranian@google.com
Cc: jolsa@redhat.com
Link: http://lkml.kernel.org/r/1415156173-10035-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yan, Zheng [Wed, 5 Nov 2014 02:55:57 +0000 (21:55 -0500)]
perf/x86/intel: Reduce lbr_sel_map[] size
The index of lbr_sel_map is bit value of perf branch_sample_type.
PERF_SAMPLE_BRANCH_MAX is 1024 at present, so each lbr_sel_map uses
4096 bytes. By using bit shift as index, we can reduce lbr_sel_map
size to 40 bytes. This patch defines 'bit shift' for branch types,
and use 'bit shift' to define lbr_sel_maps.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: jolsa@redhat.com
Cc: linux-api@vger.kernel.org
Link: http://lkml.kernel.org/r/1415156173-10035-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Aravind Gopalakrishnan [Fri, 23 Jan 2015 18:19:35 +0000 (12:19 -0600)] 
perf/x86/amd/ibs: Convert force_ibs_eilvt_setup() to void
The caller of force_ibs_eilvt_setup() is ibs_eilvt_setup()
which does not care about the return values.
So mark it void and clean up the return statements.
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <hpa@zytor.com>
Cc: <paulus@samba.org>
Cc: <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1422037175-20957-1-git-send-email-aravind.gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Shaohua Li [Thu, 5 Feb 2015 23:55:32 +0000 (15:55 -0800)] 
perf: Update userspace page info for software event
For hardware events, the userspace page of the event gets updated in
context switches, so if we read the timestamp in the page, we get
fresh info.
For software events, this is missing currently. This patch makes the
behavior consistent.
With this patch, we can implement clock_gettime(THREAD_CPUTIME) with
PERF_COUNT_SW_DUMMY in userspace as suggested by Andy and Peter. Code
like this:
if (pc->cap_user_time) {
do {
seq = pc->lock;
barrier();
running = pc->time_running;
cyc = rdtsc();
time_mult = pc->time_mult;
time_shift = pc->time_shift;
time_offset = pc->time_offset;
barrier();
} while (pc->lock != seq);
quot = (cyc >> time_shift);
rem = cyc & ((1 << time_shift) - 1);
delta = time_offset + quot * time_mult +
((rem * time_mult) >> time_shift);
running += delta;
return running;
}
I tried it on a busy system, the userspace page updating doesn't
have noticeable overhead.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/aa2dd2e4f1e9f2225758be5ba00f14d6909a8ce1.1423180257.git.shli@fb.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Shaohua Li [Thu, 5 Feb 2015 23:55:31 +0000 (15:55 -0800)]
perf: Update shadow timestamp before add event
Update the shadow timestamp before start event, because .add might
use the timestamp.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/9cd0276d6a047cb7c2885994f25e3a1f7c8c28af.1423180257.git.shli@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Markus Elfring [Tue, 3 Feb 2015 11:40:54 +0000 (12:40 +0100)] 
perf/x86/intel/uncore: Delete an unnecessary check before pci_dev_put() call
The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/54D0B59C.2060106@users.sourceforge.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Fri, 6 Feb 2015 09:16:45 +0000 (10:16 +0100)]
perf trace: Support --events foo:bar --no-syscalls
I.e. support tracing just tracepoints, without strace like
raw_syscalls:*.
[acme@ssdandy linux]$ trace --no-sys --ev sched:*exec,sched:*switch,sched:*exit usleep 1
0.048 ( ): sched:sched_process_exec:filename=/usr/bin/usleep pid=27298 old_pid=27298)
0.369 ( ): sched:sched_switch:usleep:27298 [120] S ==> swapper/5:0 [120])
0.452 ( ): sched:sched_process_exit:comm=usleep pid=27298 prio=120)
[acme@ssdandy linux]$
TODO: remove that (...) thing when --no-syscalls is specified.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vn0hsixsbhm31b2rpj97r96k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Feb 2015 15:58:57 +0000 (12:58 -0300)]
perf trace: Allow mixing with other events
Basically adopting 'perf record' --event command line argument syntax:
# trace -e \!mprotect,mmap,munmap,open,close,read,fstat,access,arch_prctl --event sched:*switch,sched:*exec,sched:*exit usleep 1
0.048 ( ): sched:sched_process_exec:filename=/bin/usleep pid=24732 old_pid=24732)
0.078 (0.002 ms): usleep/24732 brk( ) = 0x78f000
0.430 (0.002 ms): usleep/24732 brk( ) = 0x78f000
0.434 (0.003 ms): usleep/24732 brk(brk: 0x7b0000 ) = 0x7b0000
0.438 (0.001 ms): usleep/24732 brk( ) = 0x7b0000
0.460 (0.004 ms): usleep/24732 nanosleep(rqtp: 0x7ffff3696a40) ...
0.460 ( ): sched:sched_switch:prev_comm=usleep prev_pid=24732 prev_prio=120 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120)
0.515 (0.058 ms): usleep/24732 ... [continued]: nanosleep()) = 0
0.520 (0.000 ms): usleep/24732 exit_group(
0.550 ( ): sched:sched_process_exit:comm=usleep pid=24732 prio=120)
#
Next steps, probably in this order:
1) Use ordered_events code, the logic in trace needs the events to be
time ordered when needed, i.e. when multiple CPUs are involved.
2) Callchains!
3) Automatically account for interruptions when saying how long things
took.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gpst8mph575yb4wgf91qibyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 13 Feb 2015 16:22:21 +0000 (13:22 -0300)]
perf trace: Handle multiple threads better wrt syscalls being intermixed
$ trace time taskset -c 0 usleep 1
0.845 ( 0.021 ms): time/16722 wait4(upid:
4294967295, stat_addr: 0x7fff17f443d4, ru: 0x7fff17f44438 ) ...
0.865 ( 0.008 ms): time/16723 execve(arg0:
140733595272004, arg1:
140733595272720, arg2:
140733595272768, arg3:
139755107218496, arg4:
7307199665339051828, arg5: 3) = -2
2.395 ( 1.523 ms): taskset/16723 execve(arg0:
140733595272013, arg1:
140733595272720, arg2:
140733595272768, arg3:
139755107218496, arg4:
7307199665339051828, arg5: 3) = 0
2.411 ( 0.002 ms): taskset/16723 brk( ) = 0x1915000
3.300 ( 0.058 ms): usleep/16723 nanosleep(rqtp: 0x7ffff4ada190 ) = 0
<SNIP>
3.305 ( 0.000 ms): usleep/16723 exit_group(
3.363 ( 2.539 ms): time/16722 ... [continued]: wait4()) = 16723
3.366 ( 0.001 ms): time/16722 rt_sigaction(sig: INT, act: 0x7fff17f44160, oact: 0x7fff17f44200, sigsetsize: 8) = 0
We we're not seeing this line:
0.845 ( 0.021 ms): time/16722 wait4(upid:
4294967295, stat_addr: 0x7fff17f443d4, ru: 0x7fff17f44438 ) ...
just the one when it finishes:
3.363 ( 2.539 ms): time/16722 ... [continued]: wait4()) = 16723
Still some issues left till we move to ordered_samples when multiple
CPUs/threads are involved...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq9x30a1ky3djqewqn2v3ja3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 13 Feb 2015 15:32:45 +0000 (12:32 -0300)]
perf trace: Print thread info when following children
The default for 'trace workload' is to set perf_event_attr.inherit to 1,
i.e. to make it equivalent to 'strace -f workload', so we were ending
with syscalls for multiple processes mixed up, fix it:
Before:
[root@ssdandy ~]# trace -e brk time usleep 1
0.071 ( 0.002 ms): brk( ) = 0x100e000
0.802 ( 0.001 ms): brk( ) = 0x1d99000
1.132 ( 0.003 ms): brk( ) = 0x1d99000
1.136 ( 0.003 ms): brk(brk: 0x1dba000) = 0x1dba000
1.140 ( 0.001 ms): brk( ) = 0x1dba000
0.00user 0.00system 0:00.00elapsed 63%CPU (0avgtext+0avgdata 528maxresident)k
0inputs+0outputs (0major+181minor)pagefaults 0swaps
[root@ssdandy ~]#
After:
[root@ssdandy ~]# trace -f -e brk time usleep 1
0.072 ( 0.002 ms): time/26308 brk( ) = 0x1e6e000
0.860 ( 0.001 ms): usleep/26309 brk( ) = 0xb91000
1.193 ( 0.003 ms): usleep/26309 brk( ) = 0xb91000
1.197 ( 0.003 ms): usleep/26309 brk(brk: 0xbb2000) = 0xbb2000
1.201 ( 0.001 ms): usleep/26309 brk( ) = 0xbb2000
0.00user 0.00system 0:00.00elapsed 0%CPU (0avgtext+0avgdata 524maxresident)k
0inputs+0outputs (0major+180minor)pagefaults 0swaps
[root@ssdandy ~]#
BTW: to achieve the 'strace workload' behaviour, i.e. without a explicit
'-f', one has to use --no-inherit.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-`ranpwd
Link: http://lkml.kernel.org/n/tip-2wu2d5n65msxoq1i7vtcaft2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 13 Feb 2015 13:11:55 +0000 (21:11 +0800)] 
perf list: Place the header text in its right position
The hearer text 'List of pre-defined events (to be used in -e):' is
placed in an improper function, which causes an abnormal output, e.g.
'perf list hw' shows no guiding text at all, and 'perf list hw
L1-dcache*' shows the guiding text incorrectly in the middle of the
output.
Example
Before this patch:
$ perf list hw L1-dcache*
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
List of pre-defined events (to be used in -e): <-- incorrect position
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-prefetch-misses [Hardware cache event]
L1-dcache-prefetches [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-dcache-stores [Hardware cache event]
After this patch:
$ perf list hw L1-dcache*
List of pre-defined events (to be used in -e): <-- correct position
branch-instructions OR branches [Hardware event]
branch-misses [Hardware event]
bus-cycles [Hardware event]
cache-misses [Hardware event]
cache-references [Hardware event]
cpu-cycles OR cycles [Hardware event]
instructions [Hardware event]
stalled-cycles-backend OR idle-cycles-backend [Hardware event]
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-prefetch-misses [Hardware cache event]
L1-dcache-prefetches [Hardware cache event]
L1-dcache-store-misses [Hardware cache event]
L1-dcache-stores [Hardware cache event]
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kaixu Xia [Tue, 27 Jan 2015 09:55:12 +0000 (17:55 +0800)] 
perf: Remove the extra validity check on nr_pages
The function is_power_of_2() also do the check on nr_pages, so the first
check performed is unnecessary. On the other hand, the key point is to
ensure @nr_pages is a power-of-two number and mostly @nr_pages is a
nonzero value, so in the most cases, the function is_power_of_2() will
be called.
Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Link: http://lkml.kernel.org/r/1422352512-75150-1-git-send-email-xiakaixu@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yunlong Song [Fri, 13 Feb 2015 13:11:52 +0000 (21:11 +0800)]
perf tools: Fix a bug of segmentation fault
Fix the 'segmentation fault' bug of 'perf list --list-cmds', which also
happens in other cases (e.g. record, report ...). This bug happens when
there are no cmds to list at all.
Example:
Before this patch:
$ perf list --list-cmds
Segmentation fault
$
After this patch:
$ perf list --list-cmds
$
As shown above, the result prints nothing rather than a segmentation
fault. The null result means 'perf list' has no cmds to display at this
time.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1423833115-11199-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 11 Jan 2015 22:59:55 +0000 (23:59 +0100)]
perf build: Display make commands on V=1
Get more verbose output wrt displaying executed commands from make.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-68v67h59zoz7ilb1ggcuff3j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 9 Jan 2015 16:11:04 +0000 (17:11 +0100)]
tools lib lockdep: Use tools build framework
Move the lockdep library building under tools build framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: S. Lockwood-Childs <sjl@vctlabs.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i0t25buqyo5jfvzpw2347h1h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 7 Jan 2015 17:39:45 +0000 (18:39 +0100)]
tools lib traceevent: Use tools build framework
Move the libtraceevent library building under tools build framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-opvx59tcawlmm916lg4aff4h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 10 Jan 2015 19:53:13 +0000 (20:53 +0100)]
tools lib api: Rename libapikfs.a to libapi.a
Renaming libapikfs.a to libapi.a, because it's not just 'fs' specific
library now.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-g1mk5oj2ayq4vn653ovfg3gv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 9 Jan 2015 15:38:25 +0000 (16:38 +0100)]
tools lib api: Use tools build framework
Move the libapikfs library building under tools build framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xjo8r7nuqy9mvlfrmx9zcfwb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 14 Jan 2015 18:05:27 +0000 (19:05 +0100)]
perf build: Add build documentation
Adding file describing the basics of perf build process.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ibgf7vxyduwohlqqfayl11xb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 18:02:51 +0000 (19:02 +0100)]
perf build: Remove PERF-CFLAGS file
Removing PERF-CFLAGS file, because the build framework stores full build
command line for each object and triggers rebuilt if necessary.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-99hamnd2msiwgsi78yauihhd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 15:51:35 +0000 (16:51 +0100)]
perf build: Remove uneeded variables
Removing uneeded variables from Makefile.perf:
BUILTIN_OBJS LIB_OBJS GTK_OBJS
- objects are now hold by in the build Makefiles
LIB_H
- header dependencies iare now handled by Build
framework
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o85k0klhwqh3fmvryfgcpr95@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 15:48:54 +0000 (16:48 +0100)]
perf build: Remove directory dependency rules
Removing subdirectories creation support from Makefile.perf as it's no
longer needed, since it's properly handled by new build system.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2i8x5hdllpm6cyhfh1cr88hv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 17:44:38 +0000 (18:44 +0100)]
perf build: Add single target build framework support
Add support to build single targets, like:
$ make util/map.o # objects
$ make util/map.i # preprocessor
$ make util/map.s # assembly
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tt10y0dmweq6rjaod937rpb4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:14:20 +0000 (14:14 +0100)]
perf build: Add arch sparc objects building
Move the sparc arch objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-160hknrqr27c9zf59japw91y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:13:25 +0000 (14:13 +0100)]
perf build: Add arch sh objects building
Move the sh arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nsg1j4djtq85jtrqw830f2az@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:12:21 +0000 (14:12 +0100)]
perf build: Add arch s390 objects building
Move the s390 arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8f5tlfwegkirhir2ffz8nw3i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:10:57 +0000 (14:10 +0100)]
perf build: Add arch powerpc objects building
Move the powerpc arch objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nqrtlipvjptdyjfuzlnegqgu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:09:08 +0000 (14:09 +0100)]
perf build: Add arch arm64 objects building
Move the arm64 arch objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ptqfz1op92yrtccjiww7h1v5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:07:04 +0000 (14:07 +0100)]
perf build: Add arch arm objects building
Move the arm arch objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7bxhmeh4bjabqsmxu4gl6p0b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 13:03:40 +0000 (14:03 +0100)]
perf build: Add arch x86 objects building
Move the x86 arch objects building under build framework to be included
in the libperf build object.
Adding also arch/$(ARCH)/Build files for the rest of the archs. The
reason for this is that in arch/Build we now do:
+libperf-y += $(ARCH)/
which would make the build to fail on other architectures, because the
build framework requires 'Build' file in nested directories and this
patch adds it only for x86.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5enob06z07m7ew6nzzdmp3n2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 16:09:15 +0000 (17:09 +0100)]
perf build: Add perf.o object building
Move the perf object building under build framework to be included in
the perf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wiiciip2w6ajvj03huqz50xw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 12:31:12 +0000 (13:31 +0100)]
perf build: Add zlib objects building
Move the zlib objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cpbb47g82ahpa4yqfr9dcobq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 12:30:04 +0000 (13:30 +0100)]
perf build: Add perf regs objects building
Move the regs objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hgny792g5x5iaklc34aa57uh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 12:11:32 +0000 (13:11 +0100)]
perf build: Add scripts objects building
Move the scripts objects building under build framework to be included
in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ry8pd41ahwpq9h46i8te33c7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 23:34:23 +0000 (00:34 +0100)]
perf build: Add gtk objects building
Move the gtk objects building under build framework.
Add new gtk build object so it's separated from the rest of the code and
could be librarized.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cd27z7vww85nxdq37rkjkkbm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 23:27:52 +0000 (00:27 +0100)]
perf build: Add slang objects building
Move the slang objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ofo1r00jl6i143qxcl9n2jr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 23:16:01 +0000 (00:16 +0100)]
perf build: Add ui objects building
Move the ui objects building under build framework to be included in the
libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-re5vuat8uu396n7hyor9b5ve@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 23:11:11 +0000 (00:11 +0100)]
perf build: Add dwarf unwind objects building
Move the dwarf unwind objects building under build framework to be
included in the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7f7dmhkhs0e7jnqiu9ibzqia@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 23:06:25 +0000 (00:06 +0100)]
perf build: Add dwarf objects building
Move the dwarf objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5ody6tnfnkt4rezvpem8n7rm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 22:52:25 +0000 (23:52 +0100)]
perf build: Add probe objects building
Move the probe objects building under build framework to be included in
the libperf build object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-p39iitiu2ltgmtbn48bsh7nz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 16:42:46 +0000 (17:42 +0100)]
perf build: Add libperf objects building
Move the util objects building under build framework.
Add the new libperf build object so it's separated from the rest of the
perf code and could be librarized.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-574tgt9t23tnxo9td8qjiibc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 14:13:44 +0000 (15:13 +0100)]
perf build: Add builtin objects building
Move the rest of builtin objects (bench and test are already in)
building under build framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mrh2d4kfyi4g1el4kmdcghl8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 14:03:09 +0000 (15:03 +0100)]
perf build: Add tests objects building
Move test objects building under build framework.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-azbkwd1fl32t997a4shz4lgp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 12:52:36 +0000 (13:52 +0100)]
perf build: Add bench objects building
Move bench objects building under build framework and enable perf-in.o
rule.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b0gxubmn3qjabaq0lune53y3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 10 Jan 2015 20:43:32 +0000 (21:43 +0100)]
perf build: Disable make's built-in rules
We don't use any built-in rules, so we can disable make's checks for
that and build faster.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fr54ist3woy7efz6z3m720vb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 11 Jan 2015 22:05:29 +0000 (23:05 +0100)]
perf tools: Remove api fs object from python build
It's already included in libapikfs.a library, which is already used to
link perf.so.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ijp7xkmj585rqajy4xmvjnar@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 30 Dec 2014 15:44:11 +0000 (16:44 +0100)]
tools build: Add subdir support
Add support to make directory any time we build objects out of the tree
(O=/tmp/krava) and the output directory does not exist.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h80ukls4o2kpr0e4c4bfln6u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 31 Dec 2014 16:37:00 +0000 (17:37 +0100)]
tools build: Add detected config support
Adding support to include detected configuration makefile into the build
process. This will allow the Build objects to be configurable based on
the config data, like:
perf-$(CONFIG_KRAVA) += krava.o
The configuration is stored in '.config-detected' file, which is
generated for each compilation.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bl8qho0ubck7aqrbbfu9inlm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 29 Dec 2014 12:51:45 +0000 (13:51 +0100)]
tools build: Add new build support
Adding new build framework into 'tools/build' to be used by tools.
There's no change for actual building at this point, it comes in the
next patches.
The idea and more details are explained in the
'tools/build/Documentation/Build.txt' file.
I adopted everything from the kernel build system, with some changes to
allow for multiple binaries build definitions.
While the kernel's build output is single image (forget modules) we need
to be able to build several binaries/libraries.
The basic idea is that sser provides 'Build' files with objects
definitions like:
perf-y += a.o
perf-y += b.o
libperf-y += c.o
libperf-y += d.o
and the build framework outputs files:
perf-in.o # a.o, b.o compiled in
libperf-in.o # c.o, d.o compiled in
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fbj22h4av0otlxupwcmrxgpa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Josh Boyer [Wed, 11 Feb 2015 16:24:05 +0000 (11:24 -0500)] 
perf tools: Define _GNU_SOURCE on pthread_attr_setaffinity_np feature check
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h is included in order to get the proper
function declaration. Define this in the Makefile.
Without this defined, the feature check fails on a Fedora system with
gcc5 and then the perf build later fails with conflicting prototypes for
the function.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Tue, 10 Feb 2015 09:18:53 +0000 (18:18 +0900)] 
perf buildid-cache: Consolidate .build-id cache path generators
Consolidate .build-id cache path generating routines to
build_id__filename() function. Other functions must use it to get the
buildid cache path (link path) from build-id. This can reduce the risk
of partial-update.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150210091853.19264.58513.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Tue, 10 Feb 2015 09:18:51 +0000 (18:18 +0900)]
perf buildid-cache: Remove unneeded debugdir parameters
Functions related to buildid-cache subcommand use debugdir parameters
for passing buildid cache directory path. However all callers just pass
buildid_dir global variable. Moreover, other functions which refer
buildid cache use buildid_dir directly.
This removes unneeded debugdir parameters from those functions and use
buildid_dir if needed.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20150210091851.19264.72741.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vinson Lee [Tue, 10 Feb 2015 00:29:37 +0000 (16:29 -0800)] 
perf symbols: Define STT_GNU_IFUNC for glibc 2.9 and older.
The token STT_GNU_IFUNC is not available with glibc 2.9 and older.
Define this token if it is not already defined.
This patch fixes this build errors with older versions of glibc.
CC util/symbol-elf.o
util/symbol-elf.c: In function ‘elf_sym__is_function’:
util/symbol-elf.c:75: error: ‘STT_GNU_IFUNC’ undeclared (first use in this function)
util/symbol-elf.c:75: error: (Each undeclared identifier is reported only once
util/symbol-elf.c:75: error: for each function it appears in.)
make: *** [util/symbol-elf.o] Error 1
Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Avi Kivity <avi@cloudius-systems.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: stable@vger.kernel.org # 3.17+
Link: http://lkml.kernel.org/r/1423528286-13630-1-git-send-email-vlee@twopensource.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Mon, 2 Feb 2015 19:35:07 +0000 (14:35 -0500)] 
perf tools: Make perf aware of tracefs
As tracefs may be mounted instead of debugfs to get to the event
directories, have perf know about tracefs, and use that file system over
debugfs if it is present.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150202193553.340946602@goodmis.org
[ Fixed up error messages about tracefs pointed out by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Mon, 2 Feb 2015 19:35:06 +0000 (14:35 -0500)]
tools lib api fs: Add {tracefs,debugfs}_configured() functions
Add tracefs_configured() to return true if tracefs is configured in the
kernel (succeeds to find tracefs), and debugfs_configured() if debugfs
is configured in the kernel (succeeds to find debugfs).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150202193553.190606690@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Mon, 2 Feb 2015 19:35:05 +0000 (14:35 -0500)]
tools lib api debugfs: Add DEBUGFS_DEFAULT_PATH macro
Instead of hard coding "/sys/kernel/debug" everywhere, create a macro to
hold where the default path exists.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150202193553.032117017@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Mon, 2 Feb 2015 19:35:04 +0000 (14:35 -0500)]
tools lib api fs: Add tracefs mount helper functions
Since tracefs will now hold the event directory for perf, and even
though by default, debugfs still mounts tracefs on the debugfs/tracing
directory, the system admin may now choose to not mount debugfs and
instead just mount tracefs instead.
Having tracefs helper functions will facilitate having perf look for
tracefs first, and then try debugfs as a fallback.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150202193552.898934751@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Mon, 2 Feb 2015 19:35:03 +0000 (14:35 -0500)]
tools lib fs: Add helper to find mounted file systems
In preparation for adding tracefs for perf to use, create a findfs
helper utility that find_debugfs uses instead of hard coding the search
in the code. This will allow for a find_tracefs to be used as well.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150202193552.735023362@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt (Red Hat) [Mon, 2 Feb 2015 19:35:02 +0000 (14:35 -0500)]
perf tools: Do not check debugfs MAGIC for tracing files
It's rather strange to be checking the debugfs MAGIC number for the
tracing directory. A system admin may want to have a custom set of
events to trace and it should be allowed to let the admin make a temp
file (even for tracing virtual boxes, this is useful).
Also with the coming tracefs, the files may not even be under debugfs,
so checking the debugfs MAGIC number is pointless.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20150202193552.546175764@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Feb 2015 16:29:05 +0000 (13:29 -0300)]
perf evlist: Fix typo in comment
Link: http://lkml.kernel.org/n/tip-qzg2qrdgta6dmcrxqdeexthu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Feb 2015 16:25:39 +0000 (13:25 -0300)]
perf trace: No need to enable evsels for workload started from perf
As they will have perf_event_attr.enable_on_exec set, starting as soon
as we exec() the workload.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vmj3f6o3vxrg7mrdipts09li@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Feb 2015 15:46:58 +0000 (12:46 -0300)]
perf tools: Introduce event_format__fprintf method
The existing one, event_format__print() uses stdout unconditionally,
and 'perf trace' needs to use it to format into a file that may have
been set by the user, i.e. 'trace -o file.output'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-7l0mgm91hwg0bby00s5pse8r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 3 Feb 2015 15:44:09 +0000 (12:44 -0300)]
tools lib traceevent: Introduce trace_seq_do_fprintf function
So that we can specify a FILE object where to direct the formatted
output.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-a49bhdrx8851f04hppn8bqxq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This page took 0.07892 seconds and 5 git commands to generate.
projects / deliverable / linux.git / log
