TSDL grammar: Fold constant-expression into unary-expression
[ctf.git] / common-trace-format-proposal.txt
CommitLineData
5ba9f198 1
4767a9e7 2RFC: Common Trace Format (CTF) Proposal (pre-v1.7)
5ba9f198
MD
3
4Mathieu Desnoyers, EfficiOS Inc.
5
6The goal of the present document is to propose a trace format that suits the
cc089c3a 7needs of the embedded, telecom, high-performance and kernel communities. It is
5ba9f198 8based on the Common Trace Format Requirements (v1.4) document. It is designed to
cc089c3a 9allow traces to be natively generated by the Linux kernel, Linux user-space
6c7226e9
MD
10applications written in C/C++, and hardware components. One major element of
11CTF is the Trace Stream Description Language (TSDL) which flexibility
12enables description of various binary trace stream layouts.
cc089c3a
MD
13
14The latest version of this document can be found at:
15
16 git tree: git://git.efficios.com/ctf.git
17 gitweb: http://git.efficios.com/?p=ctf.git
5ba9f198
MD
18
19A reference implementation of a library to read and write this trace format is
20being implemented within the BabelTrace project, a converter between trace
21formats. The development tree is available at:
22
23 git tree: git://git.efficios.com/babeltrace.git
24 gitweb: http://git.efficios.com/?p=babeltrace.git
25
26
271. Preliminary definitions
28
3bf79539
MD
29 - Event Trace: An ordered sequence of events.
30 - Event Stream: An ordered sequence of events, containing a subset of the
31 trace event types.
32 - Event Packet: A sequence of physically contiguous events within an event
33 stream.
5ba9f198
MD
34 - Event: This is the basic entry in a trace. (aka: a trace record).
35 - An event identifier (ID) relates to the class (a type) of event within
3bf79539
MD
36 an event stream.
37 e.g. event: irq_entry.
5ba9f198
MD
38 - An event (or event record) relates to a specific instance of an event
39 class.
3bf79539
MD
40 e.g. event: irq_entry, at time X, on CPU Y
41 - Source Architecture: Architecture writing the trace.
42 - Reader Architecture: Architecture reading the trace.
5ba9f198
MD
43
44
452. High-level representation of a trace
46
3bf79539
MD
47A trace is divided into multiple event streams. Each event stream contains a
48subset of the trace event types.
5ba9f198 49
3bf79539
MD
50The final output of the trace, after its generation and optional transport over
51the network, is expected to be either on permanent or temporary storage in a
52virtual file system. Because each event stream is appended to while a trace is
53being recorded, each is associated with a separate file for output. Therefore,
54a stored trace can be represented as a directory containing one file per stream.
5ba9f198 55
6672e9e1
MD
56Meta-data description associated with the trace contains information on
57trace event types expressed in the Trace Stream Description Language
58(TSDL). This language describes:
5ba9f198
MD
59
60- Trace version.
61- Types available.
6672e9e1 62- Per-trace event header description.
3bf79539 63- Per-stream event header description.
6672e9e1 64- Per-stream event context description.
5ba9f198 65- Per-event
3bf79539 66 - Event type to stream mapping.
5ba9f198
MD
67 - Event type to name mapping.
68 - Event type to ID mapping.
6672e9e1 69 - Event context description.
5ba9f198
MD
70 - Event fields description.
71
72
3bf79539 733. Event stream
5ba9f198 74
6672e9e1
MD
75An event stream can be divided into contiguous event packets of variable
76size. These subdivisions have a variable size. An event packet can
77contain a certain amount of padding at the end. The stream header is
78repeated at the beginning of each event packet. The rationale for the
79event stream design choices is explained in Appendix B. Stream Header
80Rationale.
5ba9f198 81
3bf79539
MD
82The event stream header will therefore be referred to as the "event packet
83header" throughout the rest of this document.
5ba9f198
MD
84
85
864. Types
87
1fad7a85
MD
88Types are organized as type classes. Each type class belong to either of two
89kind of types: basic types or compound types.
90
5ba9f198
MD
914.1 Basic types
92
1fad7a85
MD
93A basic type is a scalar type, as described in this section. It includes
94integers, GNU/C bitfields, enumerations, and floating point values.
5ba9f198
MD
95
964.1.1 Type inheritance
97
80fd2569
MD
98Type specifications can be inherited to allow deriving types from a
99type class. For example, see the uint32_t named type derived from the "integer"
100type class below ("Integers" section). Types have a precise binary
101representation in the trace. A type class has methods to read and write these
102types, but must be derived into a type to be usable in an event field.
5ba9f198
MD
103
1044.1.2 Alignment
105
106We define "byte-packed" types as aligned on the byte size, namely 8-bit.
107We define "bit-packed" types as following on the next bit, as defined by the
370eae99 108"Integers" section.
5ba9f198 109
6672e9e1 110Each basic type must specify its alignment, in bits. Examples of
ec4404a7
MD
111possible alignments are: bit-packed (align = 1), byte-packed (align =
1128), or word-aligned (e.g. align = 32 or align = 64). The choice depends
113on the architecture preference and compactness vs performance trade-offs
114of the implementation. Architectures providing fast unaligned write
115byte-packed basic types to save space, aligning each type on byte
116boundaries (8-bit). Architectures with slow unaligned writes align types
117on specific alignment values. If no specific alignment is declared for a
118type, it is assumed to be bit-packed for integers with size not multiple
119of 8 bits and for gcc bitfields. All other basic types are byte-packed
120by default. It is however recommended to always specify the alignment
121explicitly. Alignment values must be power of two. Compound types are
122aligned as specified in their individual specification.
5ba9f198 123
6672e9e1 124TSDL meta-data attribute representation of a specific alignment:
5ba9f198
MD
125
126 align = value; /* value in bits */
127
1284.1.3 Byte order
129
3bf79539
MD
130By default, the native endianness of the source architecture the trace is used.
131Byte order can be overridden for a basic type by specifying a "byte_order"
132attribute. Typical use-case is to specify the network byte order (big endian:
133"be") to save data captured from the network into the trace without conversion.
134If not specified, the byte order is native.
5ba9f198 135
6672e9e1 136TSDL meta-data representation:
5ba9f198
MD
137
138 byte_order = native OR network OR be OR le; /* network and be are aliases */
139
1404.1.4 Size
141
142Type size, in bits, for integers and floats is that returned by "sizeof()" in C
143multiplied by CHAR_BIT.
144We require the size of "char" and "unsigned char" types (CHAR_BIT) to be fixed
145to 8 bits for cross-endianness compatibility.
146
6672e9e1 147TSDL meta-data representation:
5ba9f198
MD
148
149 size = value; (value is in bits)
150
1514.1.5 Integers
152
6672e9e1
MD
153Signed integers are represented in two-complement. Integer alignment,
154size, signedness and byte ordering are defined in the TSDL meta-data.
155Integers aligned on byte size (8-bit) and with length multiple of byte
156size (8-bit) correspond to the C99 standard integers. In addition,
157integers with alignment and/or size that are _not_ a multiple of the
158byte size are permitted; these correspond to the C99 standard bitfields,
159with the added specification that the CTF integer bitfields have a fixed
160binary representation. A MIT-licensed reference implementation of the
161CTF portable bitfields is available at:
5ba9f198
MD
162
163 http://git.efficios.com/?p=babeltrace.git;a=blob;f=include/babeltrace/bitfield.h
164
165Binary representation of integers:
166
167- On little and big endian:
168 - Within a byte, high bits correspond to an integer high bits, and low bits
169 correspond to low bits.
170- On little endian:
171 - Integer across multiple bytes are placed from the less significant to the
172 most significant.
173 - Consecutive integers are placed from lower bits to higher bits (even within
174 a byte).
175- On big endian:
176 - Integer across multiple bytes are placed from the most significant to the
177 less significant.
178 - Consecutive integers are placed from higher bits to lower bits (even within
179 a byte).
180
181This binary representation is derived from the bitfield implementation in GCC
182for little and big endian. However, contrary to what GCC does, integers can
6672e9e1 183cross units boundaries (no padding is required). Padding can be explicitly
5ba9f198
MD
184added (see 4.1.6 GNU/C bitfields) to follow the GCC layout if needed.
185
6672e9e1 186TSDL meta-data representation:
5ba9f198 187
80fd2569 188 integer {
5ba9f198
MD
189 signed = true OR false; /* default false */
190 byte_order = native OR network OR be OR le; /* default native */
191 size = value; /* value in bits, no default */
192 align = value; /* value in bits */
56b77c06
MD
193 /* based used for pretty-printing output, default: decimal. */
194 base = decimal OR dec OR OR d OR i OR u OR 10 OR hexadecimal OR hex OR x OR X OR p OR 16
195 OR octal OR oct OR o OR 8 OR binary OR b OR 2;
2152348f 196 }
5ba9f198 197
80fd2569 198Example of type inheritance (creation of a uint32_t named type):
5ba9f198 199
359894ac 200typealias integer {
9e4e34e9 201 size = 32;
5ba9f198
MD
202 signed = false;
203 align = 32;
38b8da21 204} := uint32_t;
5ba9f198 205
80fd2569 206Definition of a named 5-bit signed bitfield:
5ba9f198 207
359894ac 208typealias integer {
5ba9f198
MD
209 size = 5;
210 signed = true;
211 align = 1;
38b8da21 212} := int5_t;
5ba9f198
MD
213
2144.1.6 GNU/C bitfields
215
216The GNU/C bitfields follow closely the integer representation, with a
217particularity on alignment: if a bitfield cannot fit in the current unit, the
80fd2569
MD
218unit is padded and the bitfield starts at the following unit. The unit size is
219defined by the size of the type "unit_type".
5ba9f198 220
6672e9e1 221TSDL meta-data representation:
80fd2569
MD
222
223 unit_type name:size:
224
5ba9f198
MD
225As an example, the following structure declared in C compiled by GCC:
226
227struct example {
228 short a:12;
229 short b:5;
230};
231
2152348f
MD
232The example structure is aligned on the largest element (short). The second
233bitfield would be aligned on the next unit boundary, because it would not fit in
234the current unit.
5ba9f198
MD
235
2364.1.7 Floating point
237
6672e9e1 238The floating point values byte ordering is defined in the TSDL meta-data.
5ba9f198
MD
239
240Floating point values follow the IEEE 754-2008 standard interchange formats.
241Description of the floating point values include the exponent and mantissa size
242in bits. Some requirements are imposed on the floating point values:
243
244- FLT_RADIX must be 2.
245- mant_dig is the number of digits represented in the mantissa. It is specified
246 by the ISO C99 standard, section 5.2.4, as FLT_MANT_DIG, DBL_MANT_DIG and
247 LDBL_MANT_DIG as defined by <float.h>.
248- exp_dig is the number of digits represented in the exponent. Given that
249 mant_dig is one bit more than its actual size in bits (leading 1 is not
250 needed) and also given that the sign bit always takes one bit, exp_dig can be
251 specified as:
252
253 - sizeof(float) * CHAR_BIT - FLT_MANT_DIG
254 - sizeof(double) * CHAR_BIT - DBL_MANT_DIG
255 - sizeof(long double) * CHAR_BIT - LDBL_MANT_DIG
256
6672e9e1 257TSDL meta-data representation:
5ba9f198 258
80fd2569 259floating_point {
ec4404a7
MD
260 exp_dig = value;
261 mant_dig = value;
262 byte_order = native OR network OR be OR le;
263 align = value;
2152348f 264}
5ba9f198
MD
265
266Example of type inheritance:
267
359894ac 268typealias floating_point {
5ba9f198
MD
269 exp_dig = 8; /* sizeof(float) * CHAR_BIT - FLT_MANT_DIG */
270 mant_dig = 24; /* FLT_MANT_DIG */
271 byte_order = native;
ec4404a7 272 align = 32;
38b8da21 273} := float;
5ba9f198
MD
274
275TODO: define NaN, +inf, -inf behavior.
276
ec4404a7
MD
277Bit-packed, byte-packed or larger alignments can be used for floating
278point values, similarly to integers.
279
5ba9f198
MD
2804.1.8 Enumerations
281
282Enumerations are a mapping between an integer type and a table of strings. The
283numerical representation of the enumeration follows the integer type specified
6672e9e1
MD
284by the meta-data. The enumeration mapping table is detailed in the enumeration
285description within the meta-data. The mapping table maps inclusive value
286ranges (or single values) to strings. Instead of being limited to simple
3bf79539 287"value -> string" mappings, these enumerations map
80fd2569 288"[ start_value ... end_value ] -> string", which map inclusive ranges of
3bf79539
MD
289values to strings. An enumeration from the C language can be represented in
290this format by having the same start_value and end_value for each element, which
291is in fact a range of size 1. This single-value range is supported without
4767a9e7 292repeating the start and end values with the value = string declaration.
80fd2569 293
a9b83695 294enum name : integer_type {
359894ac 295 somestring = start_value1 ... end_value1,
80fd2569
MD
296 "other string" = start_value2 ... end_value2,
297 yet_another_string, /* will be assigned to end_value2 + 1 */
298 "some other string" = value,
299 ...
300};
301
302If the values are omitted, the enumeration starts at 0 and increment of 1 for
303each entry:
304
a9b83695 305enum name : unsigned int {
80fd2569
MD
306 ZERO,
307 ONE,
308 TWO,
309 TEN = 10,
310 ELEVEN,
3bf79539 311};
5ba9f198 312
80fd2569 313Overlapping ranges within a single enumeration are implementation defined.
5ba9f198 314
2152348f
MD
315A nameless enumeration can be declared as a field type or as part of a typedef:
316
a9b83695 317enum : integer_type {
2152348f
MD
318 ...
319}
320
c2742c56
MD
321Enumerations omitting the container type ": integer_type" use the "int"
322type (for compatibility with C99). The "int" type must be previously
323declared. E.g.:
324
325typealias integer { size = 32; align = 32; signed = true } := int;
326
327enum {
328 ...
329}
330
1fad7a85 331
5ba9f198
MD
3324.2 Compound types
333
1fad7a85
MD
334Compound are aggregation of type declarations. Compound types include
335structures, variant, arrays, sequences, and strings.
336
5ba9f198
MD
3374.2.1 Structures
338
339Structures are aligned on the largest alignment required by basic types
340contained within the structure. (This follows the ISO/C standard for structures)
341
6672e9e1 342TSDL meta-data representation of a named structure:
5ba9f198 343
80fd2569
MD
344struct name {
345 field_type field_name;
346 field_type field_name;
347 ...
348};
5ba9f198
MD
349
350Example:
351
80fd2569
MD
352struct example {
353 integer { /* Nameless type */
354 size = 16;
355 signed = true;
356 align = 16;
357 } first_field_name;
6672e9e1 358 uint64_t second_field_name; /* Named type declared in the meta-data */
3bf79539 359};
5ba9f198
MD
360
361The fields are placed in a sequence next to each other. They each possess a
362field name, which is a unique identifier within the structure.
363
2152348f 364A nameless structure can be declared as a field type or as part of a typedef:
80fd2569
MD
365
366struct {
367 ...
2152348f 368}
80fd2569 369
ec4404a7
MD
370Alignment for a structure compound type can be forced to a minimum value
371by adding an "align" specifier after the declaration of a structure
372body. This attribute is read as: align(value). The value is specified in
373bits. The structure will be aligned on the maximum value between this
374attribute and the alignment required by the basic types contained within
375the structure. e.g.
376
377struct {
378 ...
379} align(32)
380
77a98c82 3814.2.2 Variants (Discriminated/Tagged Unions)
fcba70d4 382
fdf2bb05
MD
383A CTF variant is a selection between different types. A CTF variant must
384always be defined within the scope of a structure or within fields
385contained within a structure (defined recursively). A "tag" enumeration
386field must appear in either the same lexical scope, prior to the variant
1ab22b2a
MD
387field (in field declaration order), in an upper lexical scope (see
388Section 7.3.1), or in an upper dynamic scope (see Section 7.3.2). The
389type selection is indicated by the mapping from the enumeration value to
390the string used as variant type selector. The field to use as tag is
391specified by the "tag_field", specified between "< >" after the
fdf2bb05
MD
392"variant" keyword for unnamed variants, and after "variant name" for
393named variants.
fcba70d4
MD
394
395The alignment of the variant is the alignment of the type as selected by the tag
396value for the specific instance of the variant. The alignment of the type
397containing the variant is independent of the variant alignment. The size of the
398variant is the size as selected by the tag value for the specific instance of
399the variant.
400
401A named variant declaration followed by its definition within a structure
402declaration:
403
404variant name {
405 field_type sel1;
406 field_type sel2;
407 field_type sel3;
408 ...
409};
410
411struct {
a9b83695 412 enum : integer_type { sel1, sel2, sel3, ... } tag_field;
fcba70d4
MD
413 ...
414 variant name <tag_field> v;
415}
416
417An unnamed variant definition within a structure is expressed by the following
6672e9e1 418TSDL meta-data:
fcba70d4
MD
419
420struct {
a9b83695 421 enum : integer_type { sel1, sel2, sel3, ... } tag_field;
fcba70d4
MD
422 ...
423 variant <tag_field> {
424 field_type sel1;
425 field_type sel2;
426 field_type sel3;
427 ...
428 } v;
429}
430
431Example of a named variant within a sequence that refers to a single tag field:
432
433variant example {
434 uint32_t a;
435 uint64_t b;
436 short c;
437};
438
439struct {
a9b83695 440 enum : uint2_t { a, b, c } choice;
1ab22b2a
MD
441 unsigned int seqlen;
442 variant example <choice> v[seqlen];
fcba70d4
MD
443}
444
445Example of an unnamed variant:
446
447struct {
a9b83695 448 enum : uint2_t { a, b, c, d } choice;
fcba70d4
MD
449 /* Unrelated fields can be added between the variant and its tag */
450 int32_t somevalue;
451 variant <choice> {
452 uint32_t a;
453 uint64_t b;
454 short c;
455 struct {
456 unsigned int field1;
457 uint64_t field2;
458 } d;
459 } s;
460}
461
462Example of an unnamed variant within an array:
463
464struct {
a9b83695 465 enum : uint2_t { a, b, c } choice;
fcba70d4
MD
466 variant <choice> {
467 uint32_t a;
468 uint64_t b;
469 short c;
15850440 470 } v[10];
fcba70d4
MD
471}
472
473Example of a variant type definition within a structure, where the defined type
474is then declared within an array of structures. This variant refers to a tag
475located in an upper lexical scope. This example clearly shows that a variant
476type definition referring to the tag "x" uses the closest preceding field from
477the lexical scope of the type definition.
478
479struct {
a9b83695 480 enum : uint2_t { a, b, c, d } x;
fcba70d4
MD
481
482 typedef variant <x> { /*
483 * "x" refers to the preceding "x" enumeration in the
484 * lexical scope of the type definition.
485 */
486 uint32_t a;
487 uint64_t b;
488 short c;
489 } example_variant;
490
491 struct {
a9b83695 492 enum : int { x, y, z } x; /* This enumeration is not used by "v". */
fcba70d4 493 example_variant v; /*
a9b83695 494 * "v" uses the "enum : uint2_t { a, b, c, d }"
fcba70d4
MD
495 * tag.
496 */
497 } a[10];
498}
499
5004.2.3 Arrays
5ba9f198 501
6672e9e1
MD
502Arrays are fixed-length. Their length is declared in the type
503declaration within the meta-data. They contain an array of "inner type"
504elements, which can refer to any type not containing the type of the
505array being declared (no circular dependency). The length is the number
506of elements in an array.
5ba9f198 507
6672e9e1 508TSDL meta-data representation of a named array:
80fd2569
MD
509
510typedef elem_type name[length];
5ba9f198 511
2152348f 512A nameless array can be declared as a field type within a structure, e.g.:
5ba9f198 513
2152348f 514 uint8_t field_name[10];
80fd2569 515
ec4404a7 516Arrays are always aligned on their element alignment requirement.
5ba9f198 517
fcba70d4 5184.2.4 Sequences
5ba9f198 519
1ab22b2a
MD
520Sequences are dynamically-sized arrays. They refer to a a "length"
521unsigned integer field, which must appear in either the same lexical scope,
522prior to the sequence field (in field declaration order), in an upper
523lexical scope (see Section 7.3.1), or in an upper dynamic scope (see
524Section 7.3.2). This length field represents the number of elements in
525the sequence. The sequence per se is an array of "inner type" elements.
5ba9f198 526
1ab22b2a 527TSDL meta-data representation for a sequence type definition:
80fd2569 528
1ab22b2a
MD
529struct {
530 unsigned int length_field;
531 typedef elem_type typename[length_field];
532 typename seq_field_name;
533}
534
535A sequence can also be declared as a field type, e.g.:
80fd2569 536
1ab22b2a
MD
537struct {
538 unsigned int length_field;
539 long seq_field_name[length_field];
540}
80fd2569 541
1ab22b2a
MD
542Multiple sequences can refer to the same length field, and these length
543fields can be in a different upper dynamic scope:
544
545e.g., assuming the stream.event.header defines:
546
547stream {
548 ...
549 id = 1;
550 event.header := struct {
551 uint16_t seq_len;
552 };
553};
554
555event {
556 ...
557 stream_id = 1;
558 fields := struct {
559 long seq_a[stream.event.header.seq_len];
560 char seq_b[stream.event.header.seq_len];
561 };
562};
80fd2569 563
1ab22b2a 564The sequence elements follow the "array" specifications.
5ba9f198 565
fcba70d4 5664.2.5 Strings
5ba9f198
MD
567
568Strings are an array of bytes of variable size and are terminated by a '\0'
6672e9e1
MD
569"NULL" character. Their encoding is described in the TSDL meta-data. In
570absence of encoding attribute information, the default encoding is
571UTF-8.
5ba9f198 572
6672e9e1 573TSDL meta-data representation of a named string type:
80fd2569 574
359894ac 575typealias string {
5ba9f198 576 encoding = UTF8 OR ASCII;
38b8da21 577} := name;
5ba9f198 578
80fd2569
MD
579A nameless string type can be declared as a field type:
580
581string field_name; /* Use default UTF8 encoding */
5ba9f198 582
ec4404a7
MD
583Strings are always aligned on byte size.
584
3bf79539
MD
5855. Event Packet Header
586
6672e9e1
MD
587The event packet header consists of two parts: the "event packet header"
588is the same for all streams of a trace. The second part, the "event
589packet context", is described on a per-stream basis. Both are described
590in the TSDL meta-data. The packets are aligned on architecture-page-sized
591addresses.
3bf79539 592
6672e9e1 593Event packet header (all fields are optional, specified by TSDL meta-data):
3bf79539 594
6672e9e1
MD
595- Magic number (CTF magic number: 0xC1FC1FC1) specifies that this is a
596 CTF packet. This magic number is optional, but when present, it should
597 come at the very beginning of the packet.
598- Trace UUID, used to ensure the event packet match the meta-data used.
599 (note: we cannot use a meta-data checksum in every cases instead of a
600 UUID because meta-data can be appended to while tracing is active)
601 This field is optional.
602- Stream ID, used as reference to stream description in meta-data.
603 This field is optional if there is only one stream description in the
604 meta-data, but becomes required if there are more than one stream in
605 the TSDL meta-data description.
3bf79539 606
6672e9e1 607Event packet context (all fields are optional, specified by TSDL meta-data):
3bf79539
MD
608
609- Event packet content size (in bytes).
610- Event packet size (in bytes, includes padding).
611- Event packet content checksum (optional). Checksum excludes the event packet
612 header.
613- Per-stream event packet sequence count (to deal with UDP packet loss). The
614 number of significant sequence counter bits should also be present, so
b11853af 615 wrap-arounds are dealt with correctly.
6672e9e1 616- Time-stamp at the beginning and time-stamp at the end of the event packet.
3bf79539
MD
617 Both timestamps are written in the packet header, but sampled respectively
618 while (or before) writing the first event and while (or after) writing the
619 last event in the packet. The inclusive range between these timestamps should
620 include all event timestamps assigned to events contained within the packet.
5ba9f198 621- Events discarded count
3bf79539
MD
622 - Snapshot of a per-stream free-running counter, counting the number of
623 events discarded that were supposed to be written in the stream prior to
624 the first event in the event packet.
5ba9f198 625 * Note: producer-consumer buffer full condition should fill the current
3bf79539 626 event packet with padding so we know exactly where events have been
5ba9f198 627 discarded.
3bf79539
MD
628- Lossless compression scheme used for the event packet content. Applied
629 directly to raw data. New types of compression can be added in following
630 versions of the format.
5ba9f198
MD
631 0: no compression scheme
632 1: bzip2
633 2: gzip
3bf79539
MD
634 3: xz
635- Cypher used for the event packet content. Applied after compression.
5ba9f198
MD
636 0: no encryption
637 1: AES
3bf79539 638- Checksum scheme used for the event packet content. Applied after encryption.
5ba9f198
MD
639 0: no checksum
640 1: md5
641 2: sha1
642 3: crc32
643
6672e9e1 6445.1 Event Packet Header Description
3bf79539 645
fc5425db 646The event packet header layout is indicated by the trace packet.header
6672e9e1
MD
647field. Here is a recommended structure type for the packet header with
648the fields typically expected (although these fields are each optional):
fc5425db 649
80fd2569
MD
650struct event_packet_header {
651 uint32_t magic;
652 uint8_t trace_uuid[16];
3bf79539 653 uint32_t stream_id;
80fd2569 654};
5ba9f198 655
fc5425db
MD
656trace {
657 ...
658 packet.header := struct event_packet_header;
659};
660
6672e9e1
MD
661If the magic number is not present, tools such as "file" will have no
662mean to discover the file type.
663
664If the trace_uuid is not present, no validation that the meta-data
37b39e47
MD
665actually corresponds to the stream is performed.
666
667If the stream_id packet header field is missing, the trace can only
668contain a single stream. Its "id" field can be left out, and its events
669don't need to declare a "stream_id" field.
670
671
3bf79539
MD
6725.2 Event Packet Context Description
673
674Event packet context example. These are declared within the stream declaration
6672e9e1 675in the meta-data. All these fields are optional. If the packet size field is
6a7c61df 676missing, the whole stream only contains a single packet. If the content
f6b81726
MD
677size field is missing, the packet is filled (no padding). The content
678and packet sizes include all headers.
3bf79539
MD
679
680An example event packet context type:
681
80fd2569 682struct event_packet_context {
3bf79539
MD
683 uint64_t timestamp_begin;
684 uint64_t timestamp_end;
685 uint32_t checksum;
686 uint32_t stream_packet_count;
687 uint32_t events_discarded;
688 uint32_t cpu_id;
689 uint32_t/uint16_t content_size;
690 uint32_t/uint16_t packet_size;
691 uint8_t stream_packet_count_bits; /* Significant counter bits */
692 uint8_t compression_scheme;
693 uint8_t encryption_scheme;
3b0f8e4d 694 uint8_t checksum_scheme;
3bf79539 695};
5ba9f198 696
fcba70d4 697
5ba9f198
MD
6986. Event Structure
699
700The overall structure of an event is:
701
6672e9e1
MD
7021 - Stream Packet Context (as specified by the stream meta-data)
703 2 - Event Header (as specified by the stream meta-data)
704 3 - Stream Event Context (as specified by the stream meta-data)
705 4 - Event Context (as specified by the event meta-data)
706 5 - Event Payload (as specified by the event meta-data)
5ba9f198 707
fdf2bb05 708This structure defines an implicit dynamic scoping, where variants
7d9d7e92
MD
709located in inner structures (those with a higher number in the listing
710above) can refer to the fields of outer structures (with lower number in
6c7226e9 711the listing above). See Section 7.3 TSDL Scopes for more detail.
5ba9f198 712
fdf2bb05 7136.1 Event Header
fcba70d4 714
6672e9e1 715Event headers can be described within the meta-data. We hereby propose, as an
fcba70d4
MD
716example, two types of events headers. Type 1 accommodates streams with less than
71731 event IDs. Type 2 accommodates streams with 31 or more event IDs.
5ba9f198 718
3bf79539
MD
719One major factor can vary between streams: the number of event IDs assigned to
720a stream. Luckily, this information tends to stay relatively constant (modulo
5ba9f198 721event registration while trace is being recorded), so we can specify different
3bf79539 722representations for streams containing few event IDs and streams containing
6672e9e1
MD
723many event IDs, so we end up representing the event ID and time-stamp as
724densely as possible in each case.
5ba9f198 725
fcba70d4
MD
726The header is extended in the rare occasions where the information cannot be
727represented in the ranges available in the standard event header. They are also
3bf79539
MD
728used in the rare occasions where the data required for a field could not be
729collected: the flag corresponding to the missing field within the missing_fields
730array is then set to 1.
5ba9f198 731
6672e9e1
MD
732Types uintX_t represent an X-bit unsigned integer, as declared with
733either:
5ba9f198 734
6672e9e1
MD
735 typealias integer { size = X; align = X; signed = false } := uintX_t;
736
737 or
738
739 typealias integer { size = X; align = 1; signed = false } := uintX_t;
5ba9f198 740
fdf2bb05 7416.1.1 Type 1 - Few event IDs
5ba9f198
MD
742
743 - Aligned on 32-bit (or 8-bit if byte-packed, depending on the architecture
744 preference).
5ba9f198 745 - Native architecture byte ordering.
fcba70d4
MD
746 - For "compact" selection
747 - Fixed size: 32 bits.
748 - For "extended" selection
749 - Size depends on the architecture and variant alignment.
5ba9f198 750
80fd2569 751struct event_header_1 {
fcba70d4
MD
752 /*
753 * id: range: 0 - 30.
754 * id 31 is reserved to indicate an extended header.
755 */
a9b83695 756 enum : uint5_t { compact = 0 ... 30, extended = 31 } id;
fcba70d4
MD
757 variant <id> {
758 struct {
759 uint27_t timestamp;
760 } compact;
761 struct {
762 uint32_t id; /* 32-bit event IDs */
763 uint64_t timestamp; /* 64-bit timestamps */
764 } extended;
765 } v;
5ba9f198
MD
766};
767
5ba9f198 768
fdf2bb05 7696.1.2 Type 2 - Many event IDs
5ba9f198 770
fcba70d4 771 - Aligned on 16-bit (or 8-bit if byte-packed, depending on the architecture
5ba9f198 772 preference).
5ba9f198 773 - Native architecture byte ordering.
fcba70d4
MD
774 - For "compact" selection
775 - Size depends on the architecture and variant alignment.
776 - For "extended" selection
777 - Size depends on the architecture and variant alignment.
5ba9f198 778
80fd2569 779struct event_header_2 {
fcba70d4
MD
780 /*
781 * id: range: 0 - 65534.
782 * id 65535 is reserved to indicate an extended header.
783 */
a9b83695 784 enum : uint16_t { compact = 0 ... 65534, extended = 65535 } id;
fcba70d4
MD
785 variant <id> {
786 struct {
787 uint32_t timestamp;
788 } compact;
789 struct {
790 uint32_t id; /* 32-bit event IDs */
791 uint64_t timestamp; /* 64-bit timestamps */
792 } extended;
793 } v;
5ba9f198
MD
794};
795
5ba9f198
MD
796
7976.2 Event Context
798
6672e9e1
MD
799The event context contains information relative to the current event.
800The choice and meaning of this information is specified by the TSDL
801stream and event meta-data descriptions. The stream context is applied
802to all events within the stream. The stream context structure follows
803the event header. The event context is applied to specific events. Its
804structure follows the stream context structure.
5ba9f198 805
fcba70d4
MD
806An example of stream-level event context is to save the event payload size with
807each event, or to save the current PID with each event. These are declared
6672e9e1 808within the stream declaration within the meta-data:
5ba9f198 809
fcba70d4
MD
810 stream {
811 ...
6672e9e1 812 event.context := struct {
80fd2569
MD
813 uint pid;
814 uint16_t payload_size;
6672e9e1 815 };
fcba70d4
MD
816 };
817
818An example of event-specific event context is to declare a bitmap of missing
819fields, only appended after the stream event context if the extended event
820header is selected. NR_FIELDS is the number of fields within the event (a
821numeric value).
5ba9f198 822
fcba70d4
MD
823 event {
824 context = struct {
825 variant <id> {
826 struct { } compact;
827 struct {
828 uint1_t missing_fields[NR_FIELDS]; /* missing event fields bitmap */
829 } extended;
830 } v;
831 };
832 ...
833 }
5ba9f198
MD
834
8356.3 Event Payload
836
837An event payload contains fields specific to a given event type. The fields
6672e9e1 838belonging to an event type are described in the event-specific meta-data
5ba9f198
MD
839within a structure type.
840
8416.3.1 Padding
842
843No padding at the end of the event payload. This differs from the ISO/C standard
844for structures, but follows the CTF standard for structures. In a trace, even
845though it makes sense to align the beginning of a structure, it really makes no
846sense to add padding at the end of the structure, because structures are usually
847not followed by a structure of the same type.
848
849This trick can be done by adding a zero-length "end" field at the end of the C
850structures, and by using the offset of this field rather than using sizeof()
3bf79539 851when calculating the size of a structure (see Appendix "A. Helper macros").
5ba9f198
MD
852
8536.3.2 Alignment
854
855The event payload is aligned on the largest alignment required by types
856contained within the payload. (This follows the ISO/C standard for structures)
857
858
6c7226e9
MD
8597. Trace Stream Description Language (TSDL)
860
861The Trace Stream Description Language (TSDL) allows expression of the
862binary trace streams layout in a C99-like Domain Specific Language
863(DSL).
864
865
6672e9e1 8667.1 Meta-data
6c7226e9
MD
867
868The trace stream layout description is located in the trace meta-data.
869The meta-data is itself located in a stream identified by its name:
870"metadata".
5ba9f198 871
6672e9e1
MD
872The meta-data description can be expressed in two different formats:
873text-only and packet-based. The text-only description facilitates
874generation of meta-data and provides a convenient way to enter the
875meta-data information by hand. The packet-based meta-data provides the
876CTF stream packet facilities (checksumming, compression, encryption,
877network-readiness) for meta-data stream generated and transported by a
878tracer.
879
880The text-only meta-data file is a plain text TSDL description.
881
882The packet-based meta-data is made of "meta-data packets", which each
883start with a meta-data packet header. The packet-based meta-data
884description is detected by reading the magic number "0x75D11D57" at the
885beginning of the file. This magic number is also used to detect the
886endianness of the architecture by trying to read the CTF magic number
887and its counterpart in reversed endianness. The events within the
888meta-data stream have no event header nor event context. Each event only
889contains a "string" payload. Each meta-data packet start with a special
890packet header, specific to the meta-data stream, which contains,
891exactly:
892
893struct metadata_packet_header {
2daeaa3a 894 uint32_t magic; /* 0x75D11D57 */
6672e9e1
MD
895 uint8_t trace_uuid[16]; /* Unique Universal Identifier */
896 uint32_t checksum; /* 0 if unused */
897 uint32_t content_size; /* in bits */
898 uint32_t packet_size; /* in bits */
899 uint8_t compression_scheme; /* 0 if unused */
900 uint8_t encryption_scheme; /* 0 if unused */
901 uint8_t checksum_scheme; /* 0 if unused */
902};
903
904The packet-based meta-data can be converted to a text-only meta-data by
905concatenating all the strings in contains.
4fafe1ad 906
6672e9e1
MD
907In the textual representation of the meta-data, the text contained
908within "/*" and "*/", as well as within "//" and end of line, are
909treated as comments. Boolean values can be represented as true, TRUE,
910or 1 for true, and false, FALSE, or 0 for false. Within the string-based
911meta-data description, the trace UUID is represented as a string of
912hexadecimal digits and dashes "-". In the event packet header, the trace
913UUID is represented as an array of bytes.
fcba70d4 914
fdf2bb05 915
6c7226e9 9167.2 Declaration vs Definition
fdf2bb05
MD
917
918A declaration associates a layout to a type, without specifying where
919this type is located in the event structure hierarchy (see Section 6).
920This therefore includes typedef, typealias, as well as all type
921specifiers. In certain circumstances (typedef, structure field and
922variant field), a declaration is followed by a declarator, which specify
923the newly defined type name (for typedef), or the field name (for
924declarations located within structure and variants). Array and sequence,
925declared with square brackets ("[" "]"), are part of the declarator,
a9b83695 926similarly to C99. The enumeration base type is specified by
6c7226e9 927": enum_base", which is part of the type specifier. The variant tag
a9b83695 928name, specified between "<" ">", is also part of the type specifier.
fdf2bb05
MD
929
930A definition associates a type to a location in the event structure
b9606a77
MD
931hierarchy (see Section 6). This association is denoted by ":=", as shown
932in Section 7.3.
fdf2bb05
MD
933
934
6c7226e9 9357.3 TSDL Scopes
fdf2bb05 936
6c7226e9
MD
937TSDL uses two different types of scoping: a lexical scope is used for
938declarations and type definitions, and a dynamic scope is used for
939variants references to tag fields.
fdf2bb05 940
6c7226e9 9417.3.1 Lexical Scope
fdf2bb05 942
d285084f
MD
943Each of "trace", "stream", "event", "struct" and "variant" have their own
944nestable declaration scope, within which types can be declared using "typedef"
fdf2bb05 945and "typealias". A root declaration scope also contains all declarations
7d9d7e92 946located outside of any of the aforementioned declarations. An inner
fdf2bb05 947declaration scope can refer to type declared within its container
7d9d7e92
MD
948lexical scope prior to the inner declaration scope. Redefinition of a
949typedef or typealias is not valid, although hiding an upper scope
fdf2bb05
MD
950typedef or typealias is allowed within a sub-scope.
951
6c7226e9 9527.3.2 Dynamic Scope
fdf2bb05 953
7d9d7e92
MD
954A dynamic scope consists in the lexical scope augmented with the
955implicit event structure definition hierarchy presented at Section 6.
956The dynamic scope is only used for variant tag definitions. It is used
957at definition time to look up the location of the tag field associated
958with a variant.
959
960Therefore, variants in lower levels in the dynamic scope (e.g. event
961context) can refer to a tag field located in upper levels (e.g. in the
962event header) by specifying, in this case, the associated tag with
963<header.field_name>. This allows, for instance, the event context to
964define a variant referring to the "id" field of the event header as
965selector.
fdf2bb05
MD
966
967The target dynamic scope must be specified explicitly when referring to
968a field outside of the local static scope. The dynamic scope prefixes
969are thus:
970
e0d9e2c7 971 - Trace Packet Header: <trace.packet.header. >,
7d9d7e92
MD
972 - Stream Packet Context: <stream.packet.context. >,
973 - Event Header: <stream.event.header. >,
974 - Stream Event Context: <stream.event.context. >,
975 - Event Context: <event.context. >,
976 - Event Payload: <event.fields. >.
fdf2bb05
MD
977
978Multiple declarations of the same field name within a single scope is
979not valid. It is however valid to re-use the same field name in
980different scopes. There is no possible conflict, because the dynamic
981scope must be specified when a variant refers to a tag field located in
982a different dynamic scope.
983
457d8b0a
MD
984The information available in the dynamic scopes can be thought of as the
985current tracing context. At trace production, information about the
986current context is saved into the specified scope field levels. At trace
987consumption, for each event, the current trace context is therefore
988readable by accessing the upper dynamic scopes.
989
fdf2bb05 990
6c7226e9 9917.4 TSDL Examples
d285084f 992
6672e9e1 993The grammar representing the TSDL meta-data is presented in Appendix C.
7df6b93a 994TSDL Grammar. This section presents a rather lighter reading that
6672e9e1 995consists in examples of TSDL meta-data, with template values.
969f30c0 996
350bb633
MD
997The stream "id" can be left out if there is only one stream in the
998trace. The event "id" field can be left out if there is only one event
999in a stream.
1000
5ba9f198 1001trace {
fdf2bb05 1002 major = value; /* Trace format version */
5ba9f198 1003 minor = value;
fdf2bb05 1004 uuid = "aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa"; /* Trace UUID */
58997e9e 1005 byte_order = be OR le; /* Endianness (required) */
fc5425db
MD
1006 packet.header := struct {
1007 uint32_t magic;
1008 uint8_t trace_uuid[16];
1009 uint32_t stream_id;
1010 };
3bf79539 1011};
5ba9f198 1012
3bf79539
MD
1013stream {
1014 id = stream_id;
fdf2bb05 1015 /* Type 1 - Few event IDs; Type 2 - Many event IDs. See section 6.1. */
4fa992a5
MD
1016 event.header := event_header_1 OR event_header_2;
1017 event.context := struct {
77a98c82 1018 ...
3bf79539 1019 };
4fa992a5 1020 packet.context := struct {
77a98c82 1021 ...
3bf79539
MD
1022 };
1023};
5ba9f198
MD
1024
1025event {
3d13ef1a 1026 name = event_name;
3bf79539 1027 id = value; /* Numeric identifier within the stream */
67f02e24 1028 stream_id = stream_id;
4fa992a5 1029 context := struct {
fcba70d4
MD
1030 ...
1031 };
4fa992a5 1032 fields := struct {
80fd2569
MD
1033 ...
1034 };
3bf79539 1035};
5ba9f198
MD
1036
1037/* More detail on types in section 4. Types */
1038
3d13ef1a
MD
1039/*
1040 * Named types:
1041 *
4fa992a5 1042 * Type declarations behave similarly to the C standard.
3d13ef1a
MD
1043 */
1044
80af8ac6 1045typedef aliased_type_specifiers new_type_declarators;
2152348f 1046
3d13ef1a 1047/* e.g.: typedef struct example new_type_name[10]; */
80fd2569 1048
4fa992a5
MD
1049/*
1050 * typealias
1051 *
1052 * The "typealias" declaration can be used to give a name (including
80af8ac6
MD
1053 * pointer declarator specifier) to a type. It should also be used to
1054 * map basic C types (float, int, unsigned long, ...) to a CTF type.
1055 * Typealias is a superset of "typedef": it also allows assignment of a
38b8da21 1056 * simple variable identifier to a type.
4fa992a5
MD
1057 */
1058
1059typealias type_class {
80fd2569 1060 ...
38b8da21 1061} := type_specifiers type_declarator;
2152348f 1062
3d13ef1a
MD
1063/*
1064 * e.g.:
4fa992a5 1065 * typealias integer {
3d13ef1a
MD
1066 * size = 32;
1067 * align = 32;
1068 * signed = false;
38b8da21 1069 * } := struct page *;
359894ac
MD
1070 *
1071 * typealias integer {
1072 * size = 32;
1073 * align = 32;
1074 * signed = true;
38b8da21 1075 * } := int;
3d13ef1a 1076 */
80fd2569
MD
1077
1078struct name {
3bf79539
MD
1079 ...
1080};
5ba9f198 1081
fcba70d4
MD
1082variant name {
1083 ...
1084};
1085
a9b83695 1086enum name : integer_type {
3bf79539
MD
1087 ...
1088};
1089
2152348f 1090
4fa992a5
MD
1091/*
1092 * Unnamed types, contained within compound type fields, typedef or typealias.
1093 */
2152348f 1094
80fd2569
MD
1095struct {
1096 ...
2152348f 1097}
5ba9f198 1098
ec4404a7
MD
1099struct {
1100 ...
1101} align(value)
1102
fcba70d4
MD
1103variant {
1104 ...
1105}
1106
a9b83695 1107enum : integer_type {
80fd2569 1108 ...
2152348f
MD
1109}
1110
1111typedef type new_type[length];
3bf79539 1112
2152348f
MD
1113struct {
1114 type field_name[length];
1115}
1116
1117typedef type new_type[length_type];
1118
1119struct {
1120 type field_name[length_type];
1121}
1122
1123integer {
80fd2569 1124 ...
2152348f 1125}
3bf79539 1126
2152348f 1127floating_point {
80fd2569 1128 ...
2152348f
MD
1129}
1130
1131struct {
1132 integer_type field_name:size; /* GNU/C bitfield */
1133}
1134
1135struct {
1136 string field_name;
1137}
3bf79539 1138
fcba70d4 1139
3bf79539 1140A. Helper macros
5ba9f198
MD
1141
1142The two following macros keep track of the size of a GNU/C structure without
1143padding at the end by placing HEADER_END as the last field. A one byte end field
1144is used for C90 compatibility (C99 flexible arrays could be used here). Note
1145that this does not affect the effective structure size, which should always be
1146calculated with the header_sizeof() helper.
1147
1148#define HEADER_END char end_field
1149#define header_sizeof(type) offsetof(typeof(type), end_field)
3bf79539
MD
1150
1151
1152B. Stream Header Rationale
1153
1154An event stream is divided in contiguous event packets of variable size. These
1155subdivisions allow the trace analyzer to perform a fast binary search by time
1156within the stream (typically requiring to index only the event packet headers)
1157without reading the whole stream. These subdivisions have a variable size to
1158eliminate the need to transfer the event packet padding when partially filled
1159event packets must be sent when streaming a trace for live viewing/analysis.
1160An event packet can contain a certain amount of padding at the end. Dividing
1161streams into event packets is also useful for network streaming over UDP and
1162flight recorder mode tracing (a whole event packet can be swapped out of the
1163buffer atomically for reading).
1164
1165The stream header is repeated at the beginning of each event packet to allow
1166flexibility in terms of:
1167
1168 - streaming support,
1169 - allowing arbitrary buffers to be discarded without making the trace
1170 unreadable,
1171 - allow UDP packet loss handling by either dealing with missing event packet
1172 or asking for re-transmission.
1173 - transparently support flight recorder mode,
1174 - transparently support crash dump.
1175
6c7226e9
MD
1176
1177C. TSDL Grammar
fcba70d4 1178
4fa992a5 1179/*
6c7226e9 1180 * Common Trace Format (CTF) Trace Stream Description Language (TSDL) Grammar.
4fa992a5
MD
1181 *
1182 * Inspired from the C99 grammar:
1183 * http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1124.pdf (Annex A)
6c7226e9
MD
1184 * and c++1x grammar (draft)
1185 * http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2011/n3291.pdf (Annex A)
4fa992a5
MD
1186 *
1187 * Specialized for CTF needs by including only constant and declarations from
1188 * C99 (excluding function declarations), and by adding support for variants,
6c7226e9
MD
1189 * sequences and CTF-specific specifiers. Enumeration container types
1190 * semantic is inspired from c++1x enum-base.
4fa992a5
MD
1191 */
1192
11931) Lexical grammar
1194
11951.1) Lexical elements
1196
1197token:
1198 keyword
1199 identifier
1200 constant
1201 string-literal
1202 punctuator
1203
12041.2) Keywords
1205
1206keyword: is one of
1207
ec4404a7 1208align
4fa992a5
MD
1209const
1210char
1211double
1212enum
1213event
1214floating_point
1215float
1216integer
1217int
1218long
1219short
1220signed
1221stream
1222string
1223struct
1224trace
3e1e1a78 1225typealias
4fa992a5
MD
1226typedef
1227unsigned
1228variant
1229void
1230_Bool
1231_Complex
1232_Imaginary
1233
1234
12351.3) Identifiers
1236
1237identifier:
1238 identifier-nondigit
1239 identifier identifier-nondigit
1240 identifier digit
1241
1242identifier-nondigit:
1243 nondigit
1244 universal-character-name
1245 any other implementation-defined characters
1246
1247nondigit:
1248 _
1249 [a-zA-Z] /* regular expression */
1250
1251digit:
1252 [0-9] /* regular expression */
1253
12541.4) Universal character names
1255
1256universal-character-name:
1257 \u hex-quad
1258 \U hex-quad hex-quad
1259
1260hex-quad:
1261 hexadecimal-digit hexadecimal-digit hexadecimal-digit hexadecimal-digit
1262
12631.5) Constants
1264
1265constant:
1266 integer-constant
1267 enumeration-constant
1268 character-constant
1269
1270integer-constant:
1271 decimal-constant integer-suffix-opt
1272 octal-constant integer-suffix-opt
1273 hexadecimal-constant integer-suffix-opt
1274
1275decimal-constant:
1276 nonzero-digit
1277 decimal-constant digit
1278
1279octal-constant:
1280 0
1281 octal-constant octal-digit
1282
1283hexadecimal-constant:
1284 hexadecimal-prefix hexadecimal-digit
1285 hexadecimal-constant hexadecimal-digit
1286
1287hexadecimal-prefix:
1288 0x
1289 0X
1290
1291nonzero-digit:
1292 [1-9]
1293
1294integer-suffix:
1295 unsigned-suffix long-suffix-opt
1296 unsigned-suffix long-long-suffix
1297 long-suffix unsigned-suffix-opt
1298 long-long-suffix unsigned-suffix-opt
1299
1300unsigned-suffix:
1301 u
1302 U
1303
1304long-suffix:
1305 l
1306 L
1307
1308long-long-suffix:
1309 ll
1310 LL
1311
4fa992a5
MD
1312enumeration-constant:
1313 identifier
1314 string-literal
1315
1316character-constant:
1317 ' c-char-sequence '
1318 L' c-char-sequence '
1319
1320c-char-sequence:
1321 c-char
1322 c-char-sequence c-char
1323
1324c-char:
1325 any member of source charset except single-quote ('), backslash
1326 (\), or new-line character.
1327 escape-sequence
1328
1329escape-sequence:
1330 simple-escape-sequence
1331 octal-escape-sequence
1332 hexadecimal-escape-sequence
1333 universal-character-name
1334
1335simple-escape-sequence: one of
1336 \' \" \? \\ \a \b \f \n \r \t \v
1337
1338octal-escape-sequence:
1339 \ octal-digit
1340 \ octal-digit octal-digit
1341 \ octal-digit octal-digit octal-digit
1342
1343hexadecimal-escape-sequence:
1344 \x hexadecimal-digit
1345 hexadecimal-escape-sequence hexadecimal-digit
1346
13471.6) String literals
1348
1349string-literal:
1350 " s-char-sequence-opt "
1351 L" s-char-sequence-opt "
1352
1353s-char-sequence:
1354 s-char
1355 s-char-sequence s-char
1356
1357s-char:
1358 any member of source charset except double-quote ("), backslash
1359 (\), or new-line character.
1360 escape-sequence
1361
13621.7) Punctuators
1363
1364punctuator: one of
1365 [ ] ( ) { } . -> * + - < > : ; ... = ,
1366
1367
13682) Phrase structure grammar
1369
1370primary-expression:
1371 identifier
1372 constant
1373 string-literal
1374 ( unary-expression )
1375
1376postfix-expression:
1377 primary-expression
1378 postfix-expression [ unary-expression ]
1379 postfix-expression . identifier
1380 postfix-expressoin -> identifier
1381
1382unary-expression:
1383 postfix-expression
1384 unary-operator postfix-expression
1385
1386unary-operator: one of
1387 + -
1388
4fa992a5
MD
1389assignment-operator:
1390 =
1391
b9606a77
MD
1392type-assignment-operator:
1393 :=
1394
4fa992a5 1395constant-expression-range:
73d61ac3 1396 unary-expression ... unary-expression
4fa992a5
MD
1397
13982.2) Declarations:
1399
1400declaration:
689e04b4 1401 declaration-specifiers declarator-list-opt ;
4fa992a5
MD
1402 ctf-specifier ;
1403
1404declaration-specifiers:
689e04b4 1405 storage-class-specifier declaration-specifiers-opt
4fa992a5
MD
1406 type-specifier declaration-specifiers-opt
1407 type-qualifier declaration-specifiers-opt
1408
1409declarator-list:
1410 declarator
1411 declarator-list , declarator
1412
d285084f
MD
1413abstract-declarator-list:
1414 abstract-declarator
1415 abstract-declarator-list , abstract-declarator
1416
4fa992a5
MD
1417storage-class-specifier:
1418 typedef
1419
1420type-specifier:
1421 void
1422 char
1423 short
1424 int
1425 long
1426 float
1427 double
1428 signed
1429 unsigned
1430 _Bool
1431 _Complex
cfdd51ec 1432 _Imaginary
9dfcfc0f
MD
1433 struct-specifier
1434 variant-specifier
4fa992a5
MD
1435 enum-specifier
1436 typedef-name
1437 ctf-type-specifier
1438
ec4404a7 1439align-attribute:
73d61ac3 1440 align ( unary-expression )
ec4404a7 1441
4fa992a5 1442struct-specifier:
ec4404a7
MD
1443 struct identifier-opt { struct-or-variant-declaration-list-opt } align-attribute-opt
1444 struct identifier align-attribute-opt
4fa992a5
MD
1445
1446struct-or-variant-declaration-list:
1447 struct-or-variant-declaration
1448 struct-or-variant-declaration-list struct-or-variant-declaration
1449
1450struct-or-variant-declaration:
1451 specifier-qualifier-list struct-or-variant-declarator-list ;
550aca33 1452 declaration-specifiers storage-class-specifier declaration-specifiers declarator-list ;
38b8da21
MD
1453 typealias declaration-specifiers abstract-declarator-list := declaration-specifiers abstract-declarator-list ;
1454 typealias declaration-specifiers abstract-declarator-list := declarator-list ;
4fa992a5
MD
1455
1456specifier-qualifier-list:
1457 type-specifier specifier-qualifier-list-opt
1458 type-qualifier specifier-qualifier-list-opt
1459
1460struct-or-variant-declarator-list:
1461 struct-or-variant-declarator
1462 struct-or-variant-declarator-list , struct-or-variant-declarator
1463
1464struct-or-variant-declarator:
1465 declarator
73d61ac3 1466 declarator-opt : unary-expression
4fa992a5
MD
1467
1468variant-specifier:
1469 variant identifier-opt variant-tag-opt { struct-or-variant-declaration-list }
1470 variant identifier variant-tag
1471
1472variant-tag:
1473 < identifier >
1474
1475enum-specifier:
1476 enum identifier-opt { enumerator-list }
1477 enum identifier-opt { enumerator-list , }
1478 enum identifier
a9b83695
MD
1479 enum identifier-opt : declaration-specifiers { enumerator-list }
1480 enum identifier-opt : declaration-specifiers { enumerator-list , }
4fa992a5
MD
1481
1482enumerator-list:
1483 enumerator
1484 enumerator-list , enumerator
1485
1486enumerator:
1487 enumeration-constant
73d61ac3 1488 enumeration-constant = unary-expression
4fa992a5
MD
1489 enumeration-constant = constant-expression-range
1490
1491type-qualifier:
1492 const
1493
1494declarator:
1495 pointer-opt direct-declarator
1496
1497direct-declarator:
1498 identifier
1499 ( declarator )
1ab22b2a 1500 direct-declarator [ unary-expression ]
4fa992a5 1501
d285084f
MD
1502abstract-declarator:
1503 pointer-opt direct-abstract-declarator
1504
1505direct-abstract-declarator:
1506 identifier-opt
1507 ( abstract-declarator )
1ab22b2a 1508 direct-abstract-declarator [ unary-expression ]
d285084f
MD
1509 direct-abstract-declarator [ ]
1510
4fa992a5 1511pointer:
3b0f8e4d
MD
1512 * type-qualifier-list-opt
1513 * type-qualifier-list-opt pointer
4fa992a5
MD
1514
1515type-qualifier-list:
1516 type-qualifier
1517 type-qualifier-list type-qualifier
1518
4fa992a5
MD
1519typedef-name:
1520 identifier
1521
15222.3) CTF-specific declarations
1523
1524ctf-specifier:
1525 event { ctf-assignment-expression-list-opt }
1526 stream { ctf-assignment-expression-list-opt }
1527 trace { ctf-assignment-expression-list-opt }
38b8da21
MD
1528 typealias declaration-specifiers abstract-declarator-list := declaration-specifiers abstract-declarator-list ;
1529 typealias declaration-specifiers abstract-declarator-list := declarator-list ;
4fa992a5
MD
1530
1531ctf-type-specifier:
1532 floating_point { ctf-assignment-expression-list-opt }
1533 integer { ctf-assignment-expression-list-opt }
1534 string { ctf-assignment-expression-list-opt }
1535
1536ctf-assignment-expression-list:
1537 ctf-assignment-expression
1538 ctf-assignment-expression-list ; ctf-assignment-expression
1539
1540ctf-assignment-expression:
1541 unary-expression assignment-operator unary-expression
1542 unary-expression type-assignment-operator type-specifier
550aca33 1543 declaration-specifiers storage-class-specifier declaration-specifiers declarator-list
38b8da21
MD
1544 typealias declaration-specifiers abstract-declarator-list := declaration-specifiers abstract-declarator-list
1545 typealias declaration-specifiers abstract-declarator-list := declarator-list
This page took 0.168045 seconds and 4 git commands to generate.