[deliverable/binutils-gdb.git] / ld / emulparams / tic80coff.sh

# This file is sourced by the genscripts.sh script.
# These are shell variables that are used later by either genscripts
# or on of the scripts that it sources.

# The name of the scripttempl script to use.  In this case, genscripts
# uses scripttempl/tic80coff.sc
#
SCRIPT_NAME=tic80coff

# The name of the emultempl script to use.  If set to "template" then
# genscripts.sh will use the script emultempl/template.em.  If not set,
# then the default value is "generic".
#
# TEMPLATE_NAME=

# If this is set to an nonempty string, genscripts.sh will invoke the
# scripttempl script an extra time to create a shared library script.
#
# GENERATE_SHLIB_SCRIPT=

# The BFD output format to use.  The scripttempl script will use it in
# an OUTPUT_FORMAT expression in the linker script.
#
OUTPUT_FORMAT="coff-tic80"

# This is normally set to indicate the architecture to use, such as
# "sparc".  The scripttempl script will normally use it in an OUTPUT_ARCH
# expression in the linker script.
#
ARCH=tic80

# Some scripttempl scripts use this to set the entry address in an ENTRY
# expression in the linker script.
#
# ENTRY=

# The scripttempl script uses this to set the start address of the
# ".text" section.
#
TEXT_START_ADDR=0x2000000

# The genscripts.sh script uses this to set the default value of
# DATA_ALIGNMENT when running the scripttempl script.
#
# SEGMENT_SIZE=

# If SEGMENT_SIZE is not defined, the genscripts.sh script uses this
# to define it.
#
TARGET_PAGE_SIZE=0x1000
Commit	Line	Data
252b5132 RH	1	# This file is sourced by the genscripts.sh script.
	2	# These are shell variables that are used later by either genscripts
	3	# or on of the scripts that it sources.
	4
	5	# The name of the scripttempl script to use. In this case, genscripts
	6	# uses scripttempl/tic80coff.sc
	7	#
	8	SCRIPT_NAME=tic80coff
	9
	10	# The name of the emultempl script to use. If set to "template" then
	11	# genscripts.sh will use the script emultempl/template.em. If not set,
	12	# then the default value is "generic".
	13	#
	14	# TEMPLATE_NAME=
	15
	16	# If this is set to an nonempty string, genscripts.sh will invoke the
	17	# scripttempl script an extra time to create a shared library script.
	18	#
	19	# GENERATE_SHLIB_SCRIPT=
	20
	21	# The BFD output format to use. The scripttempl script will use it in
	22	# an OUTPUT_FORMAT expression in the linker script.
	23	#
	24	OUTPUT_FORMAT="coff-tic80"
	25
	26	# This is normally set to indicate the architecture to use, such as
	27	# "sparc". The scripttempl script will normally use it in an OUTPUT_ARCH
	28	# expression in the linker script.
	29	#
	30	ARCH=tic80
	31
	32	# Some scripttempl scripts use this to set the entry address in an ENTRY
	33	# expression in the linker script.
	34	#
	35	# ENTRY=
	36
	37	# The scripttempl script uses this to set the start address of the
	38	# ".text" section.
	39	#
	40	TEXT_START_ADDR=0x2000000
	41
e4492aa0	42	# The genscripts.sh script uses this to set the default value of
252b5132 RH	43	# DATA_ALIGNMENT when running the scripttempl script.
	44	#
	45	# SEGMENT_SIZE=
	46
	47	# If SEGMENT_SIZE is not defined, the genscripts.sh script uses this
	48	# to define it.
	49	#
	50	TARGET_PAGE_SIZE=0x1000