Add install-strip to sim/
[deliverable/binutils-gdb.git] / sim / ChangeLog
CommitLineData
78aa740b
TT
12019-12-19 Tom Tromey <tromey@adacore.com>
2
3 PR build/24572:
4 * Makefile.in (install-strip): New target.
5
ddd44b70
DD
62019-09-23 Dimitar Dimitrov <dimitar@dinux.eu>
7
8 * MAINTAINERS: Add myself as PRU maintainer.
9 * configure: Regenerated.
10 * configure.tgt: Add PRU.
11
00f93c44
AM
122019-09-20 Alan Modra <amodra@gmail.com>
13
14 * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
15
fd361982
AM
162019-09-18 Alan Modra <amodra@gmail.com>
17
18 * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
19 * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
20 * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
21 * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
22 * rx/trace.c: Update throughout for bfd section macro changes.
23
7ccbb443
SH
242019-06-13 Stafford Horne <shorne@gmail.com>
25
26 * or1k/cpu.c: Regenerate.
27 * or1k/cpu.h: Regenerate.
28 * or1k/decode.c: Regenerate.
29 * or1k/decode.h: Regenerate.
30 * or1k/model.c: Regenerate.
31 * or1k/sem-switch.c: Regenerate.
32 * or1k/sem.c: Regenerate.
33
9c4c3318
JB
342019-02-28 Joel Brobecker <brobecker@adacore.com>
35
36 * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
37
007024cc
SM
382019-02-13 Simon Marchi <simon.marchi@ericsson.com>
39
40 * MAINTAINERS: Add Andrew Burgess as global maintainer.
41
444b3fae
ПК
422019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
43
44 * sim-base.h: Add 'extern C' if header is compiled with C++.
45
7fb45a68
AB
462018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
47
48 * common/acinclude.m4 (enable-cgen-maint): Support passing path to
49 cgen source tree.
50 * cris/configure: Regenerate.
51 * frv/configure: Regenerate.
52 * iq2000/configure: Regenerate.
53 * lm32/configure: Regenerate.
54 * m32r/configure: Regenerate.
55 * or1k/configure: Regenerate.
56 * sh64/configure: Regenerate.
57
07f5f4c6
RH
582018-10-05 Stafford Horne <shorne@gmail.com>
59
60 * or1k/cpu.h: Regenerate.
61 * or1k/decode.c: Regenerate.
62 * or1k/decode.h: Regenerate.
63 * or1k/model.c: Regenerate.
64 * or1k/sem-switch.c: Regenerate.
65 * or1k/sem.c: Regenerate:
66
e2e31f10
MR
672018-07-20 Maciej W. Rozycki <macro@mips.com>
68
69 * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
70 ISA maintenance.
71
79f5b65e
DD
722018-07-19 DJ Delorie <dj@redhat.com>
73
74 * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
75
31375626
SH
762018-07-14 Stafford Horne <shorne@gmail.com>
77
78 * MAINTAINERS (or1k): Add myself as or1k maintainer.
79
d0ac1c44
SM
802018-06-19 Simon Marchi <simon.marchi@ericsson.com>
81
82 * All configure.ac: Remove AC_PREREQ.
83 * All configure: Re-generate.
84
d65ce302
MR
852018-01-22 Maciej W. Rozycki <macro@mips.com>
86
87 * MAINTAINERS: Update my company e-mail address.
88
0cd79707
SH
892017-12-12 Stafford Horne <shorne@gmail.com>
90 Peter Gavin <pgavin@gmail.com>
91
92 * configure: Regenerated.
93 * or1k/aclocal.m4: Generated.
94 * or1k/config.in: Generated.
95 * or1k/configure: Generated.
96
6e51bfa7
SH
972017-12-12 Stafford Horne <shorne@gmail.com>
98 Peter Gavin <pgavin@gmail.com>
99
100 * or1k/arch.c: Generated.
101 * or1k/arch.h: Generated.
102 * or1k/cpu.c: Generated.
103 * or1k/cpu.h: Generated.
104 * or1k/cpuall.h: Generated.
105 * or1k/decode.c: Generated.
106 * or1k/decode.h: Generated.
107 * or1k/model.c: Generated.
108 * or1k/sem-switch.c: Generated.
109 * or1k/sem.c: Generated.
110
fa8b7c21
SH
1112017-12-12 Stafford Horne <shorne@gmail.com>
112 Peter Gavin <pgavin@gmail.com>
113
114 * configure.tgt: Add or1k sim.
115 * or1k/README: New file.
116 * or1k/Makefile.in: New file.
117 * or1k/configure.ac: New file.
118 * or1k/mloop.in: New file.
119 * or1k/or1k-sim.h: New file.
120 * or1k/or1k.c: New file.
121 * or1k/sim-if.c: New file.
122 * or1k/sim-main.h: New file.
123 * or1k/traps.c: New file.
124
dcc31d28
JB
1252017-11-01 James Bowman <james.bowman@ftdichip.com>
126
127 * ft32/interp.c (step_once): Add ft32 shortcode decoder.
128
3b4b0a62
JB
1292017-10-12 James Bowman <james.bowman@ftdichip.com>
130
131 * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
132
d268bbaf
JB
1332017-10-12 James Bowman <james.bowman@ftdichip.com>
134
135 * MAINTAINERS (ft32): Add myself.
136
c0107b0f
JW
1372017-10-03 Jim Wilson <wilson@tuliptree.org>
138
139 * MAINTAINERS (aarch64): Update my email address.
140
5c887dd5
JB
1412017-09-06 John Baldwin <jhb@FreeBSD.org>
142
143 * configure.ac: Honor existing CC_FOR_BUILD in environment.
144 * configure: Regenerate.
145
742e3a77
JW
1462017-02-14 Jim Wilson <jim.wilson@linaro.org>
147
148 * MAINTAINTERS (aarch64): Add myself.
149
cadf97cf
MR
1502016-12-14 Maciej W. Rozycki <macro@imgtec.com>
151
152 * MAINTAINERS (Maintainers for particular sims): Add myself as
153 a MIPS maintainer.
154
3b8f2c8b
MR
1552016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
156
157 * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
158
5295724c
MF
1592016-01-09 Mike Frysinger <vapier@gentoo.org>
160
161 * configure.ac: Delete sim_common check and the
162 AC_CONFIG_SUBDIRS(common) call.
163 * configure: Regenerate.
164 * configure.tgt (sim_common): Delete the variable.
165
936df756
MF
1662016-01-09 Mike Frysinger <vapier@gentoo.org>
167
168 * .gitignore: Delete /common/cconfig.h entry.
169
4eb70007
NC
1702016-01-05 Nick Clifton <nickc@redhat.com>
171
172 * MAINTAINERS: Add myself as AArch64 sim maintainer.
173
ac8eefeb
TG
1742015-12-09 Tristan Gingold <gingold@adacore.com>
175
176 * aarch64/simulator.c: Remove syscall.h include.
177
1b393626
MF
1782015-12-26 Mike Frysinger <vapier@gentoo.org>
179
180 * README-HACKING: Delete mention of tconfig.h.
181
2e8cf49e
NC
1822015-11-24 Nick Clifton <nickc@redhat.com>
183
184 * configure.tgt: Add aarch64 entry.
185 * configure: Regenerate.
2e8cf49e 186
8d0978fb
MF
1872015-06-23 Mike Frysinger <vapier@gentoo.org>
188
189 * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
190 * configure: Regenerate.
191
306f4178
MF
1922015-06-12 Mike Frysinger <vapier@gentoo.org>
193
194 * README-HACKING: Change configure.in to configure.ac.
195
7fed4b0b
L
1962015-04-02 H.J. Lu <hongjiu.lu@intel.com>
197
198 * arm/configure: Regenerated.
199 * avr/configure: Likewise.
200 * bfin/configure: Likewise.
201 * common/configure: Likewise.
202 * cr16/configure: Likewise.
203 * cris/configure: Likewise.
204 * d10v/configure: Likewise.
205 * erc32/configure: Likewise.
206 * frv/configure: Likewise.
207 * ft32/configure: Likewise.
208 * h8300/configure: Likewise.
209 * igen/configure: Likewise.
210 * iq2000/configure: Likewise.
211 * lm32/configure: Likewise.
212 * m32c/configure: Likewise.
213 * m32r/configure: Likewise.
214 * m68hc11/configure: Likewise.
215 * mcore/configure: Likewise.
216 * microblaze/configure: Likewise.
217 * mips/configure: Likewise.
218 * mn10300/configure: Likewise.
219 * moxie/configure: Likewise.
220 * msp430/configure: Likewise.
221 * ppc/configure: Likewise.
222 * rl78/configure: Likewise.
223 * rx/configure: Likewise.
224 * sh/configure: Likewise.
225 * sh64/configure: Likewise.
226 * v850/configure: Likewise.
227
79730a3b
L
2282015-04-01 H.J. Lu <hongjiu.lu@intel.com>
229
230 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
231 (BFD_LIB): Remove $(ZLIB).
232 (CONFIG_LIBS): Add $(ZLIB).
233 * ppc/Makefile.in (ZLIBINC): Removed.
234 (INCLUDES): Remove $(ZLIBINC).
235 (BFD_LIB): Remove $(ZLIB).
236
0ceaf1ec
L
2372015-04-01 H.J. Lu <hongjiu.lu@intel.com>
238
239 * arm/configure: Regenerated.
240 * avr/configure: Likewise.
241 * bfin/configure: Likewise.
242 * common/configure: Likewise.
243 * cr16/configure: Likewise.
244 * cris/configure: Likewise.
245 * d10v/configure: Likewise.
246 * erc32/configure: Likewise.
247 * frv/configure: Likewise.
248 * ft32/configure: Likewise.
249 * h8300/configure: Likewise.
250 * igen/configure: Likewise.
251 * iq2000/configure: Likewise.
252 * lm32/configure: Likewise.
253 * m32c/configure: Likewise.
254 * m32r/configure: Likewise.
255 * m68hc11/configure: Likewise.
256 * mcore/configure: Likewise.
257 * microblaze/configure: Likewise.
258 * mips/configure: Likewise.
259 * mn10300/configure: Likewise.
260 * moxie/configure: Likewise.
261 * msp430/configure: Likewise.
262 * ppc/configure: Likewise.
263 * rl78/configure: Likewise.
264 * rx/configure: Likewise.
265 * sh/configure: Likewise.
266 * sh64/configure: Likewise.
267 * v850/configure: Likewise.
268
6dae8a88
MF
2692015-03-29 Mike Frysinger <vapier@gentoo.org>
270
271 * configure: Regenerate.
272 * configure.ac: Delete sim_testsuite check and config in testsuite.
273 * configure.tgt (sim_testsuite): Delete everywhere.
274
eca5fe42
MF
2752015-03-28 Mike Frysinger <vapier@gentoo.org>
276
277 * configure: Regenerate.
278 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
279
f46e4eb7
JB
2802015-03-28 James Bowman <james.bowman@ftdichip.com>
281
282 * configure.tgt: Add FT32 entry.
283 * configure: Regenerate.
284
ae7d0cac
MF
2852015-03-16 Mike Frysinger <vapier@gentoo.org>
286
287 * .gitignore: Delete tconfig.h.
288 * README-HACKING: Change tconfig.in to tconfig.h.
289
77017251
NC
2902014-03-12 Nick Clifton <nickc@redhat.com>
291
292 * MAINTAINERS: Add myself as the maintainer for the MSP430.
293
f32d1b7f
MF
2942014-03-10 Mike Frysinger <vapier@gentoo.org>
295
296 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
297 * configure: Regenerate.
298
6104cb7a
TT
2992014-01-06 Tom Tromey <tromey@redhat.com>
300
301 * common/cgen-trace.c: Don't use old VA_* macros.
302 * common/sim-load.c (xprintf): Likewise.
303 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
304
bdca5ee4
TT
3052014-01-06 Tom Tromey <tromey@redhat.com>
306
307 * README-HACKING: Don't use PARAMS.
308 * arm/wrapper.c: Don't use PARAMS.
309 * bfin/sim-main.h: Don't use PARAMS.
310 * common/callback.c: Don't use PARAMS.
311 * common/cgen-trace.c: Don't use PARAMS.
312 * common/run-sim.h: Don't use PARAMS.
313 * common/run.c: Don't use PARAMS.
314 * common/sim-base.h: Don't use PARAMS.
315 * common/sim-load.c: Don't use PARAMS.
316 * common/sim-options.h: Don't use PARAMS.
317 * common/sim-trace.c: Don't use PARAMS.
318 * common/sim-trace.h: Don't use PARAMS.
319 * common/sim-utils.h: Don't use PARAMS.
320 * cr16/cr16_sim.h: Don't use PARAMS.
321 * cr16/gencode.c: Don't use PARAMS.
322 * cr16/interp.c: Don't use PARAMS.
323 * cr16/simops.c: Don't use PARAMS.
324 * d10v/d10v_sim.h: Don't use PARAMS.
325 * d10v/gencode.c: Don't use PARAMS.
326 * d10v/interp.c: Don't use PARAMS.
327 * d10v/simops.c: Don't use PARAMS.
328 * erc32/erc32.c: Don't use PARAMS.
329 * erc32/exec.c: Don't use PARAMS.
330 * erc32/float.c: Don't use PARAMS.
331 * erc32/func.c: Don't use PARAMS.
332 * erc32/sis.c: Don't use PARAMS.
333 * erc32/sis.h: Don't use PARAMS.
334 * mips/interp.c: Don't use PARAMS.
335 * mips/sim-main.h: Don't use PARAMS.
336 * sh/interp.c: Don't use PARAMS.
337 * v850/sim-main.h: Don't use PARAMS.
338 * v850/v850_sim.h: Don't use PARAMS.
339
1ed6c797
WN
3402013-11-07 Will Newton <will.newton@linaro.org>
341
342 PR gdb/15508
343 * arm/wrapper.c (sim_create_inferior): Call init before
344 accessing STATE.
345
8782aa32
WN
3462013-11-07 Will Newton <will.newton@linaro.org>
347
d40af490 348 PR gdb/8989
8782aa32
WN
349 * arm/wrapper.c (sim_create_inferior): Avoid calling
350 bfd_get_mach with a NULL bfd.
351
3346cfda
NC
3522013-06-21 Nick Clifton <nickc@redhat.com>
353
354 * msp430: New Directory.
355 * configure.tgt: Add it.
356 * configure: Regenerate.
357
3cb2ab1a
SE
3582013-03-15 Steve Ellcey <sellcey@mips.com>
359
360 * arm/wrapper.c (sim_complete_command): Make char arguments const.
361 * avr/interp.c (sim_complete_command): Ditto.
362 * common/sim-options.c (sim_complete_command): Ditto.
363 * cr16/interp.c (sim_complete_command): Ditto.
364 * erc32/interf.c (sim_complete_command): Ditto.
365 * m32c/gdb-if.c (sim_complete_command): Ditto.
366 * microblaze/interp.c (sim_complete_command): Ditto.
367 * ppc/sim_calls.c (sim_complete_command): Ditto.
368 * rl78/gdb-if.c (sim_complete_command): Ditto.
369 * rx/gdb-if.c (sim_complete_command): Ditto.
370 * sh/interp.c (sim_complete_command): Ditto.
371
8acc9f48
JB
3722013-01-01 Joel Brobecker <brobecker@adacore.com>
373
374 Update year range in copyright notice of all files.
375
51b318de
JB
3762012-12-19 Joel Brobecker <brobecker@adacore.com>
377
378 Update old contact info in GPL license notices.
379
3fd725ef
JB
3802012-12-19 Joel Brobecker <brobecker@adacore.com>
381
382 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
383
6bb11ab3
L
3842012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
385
386 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
387 condition.
388 * common/acinclude.m4: Define lt_cv_dlopen_libs.
389 * arm/configure: Regenerate.
390 * avr/configure: Regenerate.
391 * bfin/configure: Regenerate.
392 * common/configure: Regenerate.
393 * cr16/configure: Regenerate.
394 * cris/configure: Regenerate.
395 * d10v/configure: Regenerate.
396 * erc32/configure: Regenerate.
397 * frv/configure: Regenerate.
398 * h8300/configure: Regenerate.
399 * igen/configure: Regenerate.
400 * iq2000/configure: Regenerate.
401 * lm32/configure: Regenerate.
402 * m32c/configure: Regenerate.
403 * m32r/configure: Regenerate.
404 * m68hc11/configure: Regenerate.
405 * mcore/configure: Regenerate.
406 * microblaze/configure: Regenerate.
407 * mips/configure: Regenerate.
408 * mn10300/configure: Regenerate.
409 * moxie/configure: Regenerate.
410 * ppc/configure: Regenerate.
411 * rl78/configure: Regenerate.
412 * rx/configure: Regenerate.
413 * sh/configure: Regenerate.
414 * sh64/configure: Regenerate.
415 * testsuite/configure: Regenerate.
416 * v850/configure: Regenerate.
417
2d1ef085
SC
4182012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
419
420 * MAINTAINERS: Update my email address.
421
c429cfcf
SE
4222012-09-24 Steve Ellcey <sellcey@mips.com>
423
424 * mips/basic.exp: Add mips*-mti-elf* target.
425 * configure.ac: Add mips*-mti-elf* target.
426 * configure: Regenerate.
427
5f3ef9d0
JB
4282012-06-15 Joel Brobecker <brobecker@adacore.com>
429
430 * configure: Regenerate.
431
f5546abd
ME
4322012-06-06 Michael Eager <eager@eagercon.com>
433
434 * microblaze/interp.c (config.h): Add #include.
435
c36260c7
JB
4362011-11-29 Joel Brobecker <brobecker@adacore.com>
437
438 * MAINTAINERS (Global Maintainers): New section. Add Mike
439 Frysinger.
440
87326c78
DD
4412011-11-28 DJ Delorie <dj@redhat.com>
442
443 * configure.tgt: Add rl78 support.
444 * configure: Regenerate.
445 * rl78: New directory.
446 * MAINTAINERS: Add myself as RL78 maintainer.
447
26e0f8db
HPN
4482011-07-08 Hans-Peter Nilsson <hp@axis.com>
449
450 * MAINTAINERS: Remove Thiemo Seufer.
451
1d7b4a70
MF
4522011-06-04 Mike Frysinger <vapier@gentoo.org>
453
454 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
455 * configure: Regenerate.
456
4d393d60
JM
4572011-05-04 Joseph Myers <joseph@codesourcery.com>
458
459 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
460 handle targets.
461 * configure: Regenerate.
462
ef016f83
MF
4632011-03-05 Mike Frysinger <vapier@gentoo.org>
464
465 * MAINTAINERS: Add bfin entry.
466 * configure.tgt (bfin-*-*): Handle bfin targets.
467 * configure: Regenerate.
468
85ab1af8
MF
4692011-01-05 Mike Frysinger <vapier@gentoo.org>
470
471 * .gitignore: Add /*/hw-config.h.
472
fdb38a1c
MF
4732010-12-23 Mike Frysinger <vapier@gentoo.org>
474
475 * .gitignore: New file.
476
d61e002c
DD
4772010-07-28 DJ Delorie <dj@redhat.com>
478
479 * MAINTAINERS: Add self as RX maintainer. Sort list.
480
32b269ae
NC
4812010-06-08 Nick Clifton <nickc@redhat.com>
482
483 * reg.c (set_oszc): Use unsigned int for the mask.
484 (set_szc, set_osz, set_sz): Likewise.
485
119da465
MF
4862010-04-26 Mike Frysinger <vapier@gentoo.org>
487
488 * configure.ac: Target logic moved out to and included from ...
489 * configure.tgt: ... this new file.
490 * configure: Regenerated.
491
aba193a5
MF
4922010-04-12 Mike Frysinger <vapier@gentoo.org>
493
494 * README-HACKING: Add more sections.
495
2310652a
DE
4962010-02-11 Doug Evans <dje@sebabeach.org>
497
498 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
499 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
500 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
501 * cris/semcrisv32f-switch.c: Regenerate.
502
3725885a
RW
5032010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
504
505 * avr/configure: Regenerate.
506 * cris/configure: Regenerate.
507 * microblaze/configure: Regenerate.
508
0f51e9bf
DE
5092010-01-02 Doug Evans <dje@sebabeach.org>
510
511 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
512 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
513 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
514 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
515 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
516 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
517
d436cab7
DE
5182010-01-01 Doug Evans <dje@sebabeach.org>
519
f9b98caf 520 * cris/mloop.in: Fix copyright year update snafu.
d436cab7 521
5912fadd
JB
5222009-11-24 Joel Brobecker <brobecker@adacore.com>
523
524 * common/aclocal.m4: Add include of ../../config/zlib.m4.
525 * common/common.m4: Use AM_ZLIB to check for zlib support.
526 * ppc/configure.ac: Likewise.
527 * arm/configure, avr/configure, common/configure, cr16/configure,
528 cris/configure, d10v/configure, erc32/configure, frv/configure,
529 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
530 m32r/configure, m68hc11/configure, mcore/configure,
531 microblaze/configure, mips/configure, mn10300/configure,
532 moxie/configure, ppc/configure, sh/configure, sh64/configure,
533 v850/configure: Regenerate.
534
4f8d4a38
DD
5352009-11-24 DJ Delorie <dj@redhat.com>
536
537 * rx: New directory.
538 * configure.ac: Add entry for Renesas RX.
539 * configure: Regenerate.
540
197fa1aa
DE
5412009-11-22 Doug Evans <dje@sebabeach.org>
542
543 * cris/cpuall.h: Regenerate.
544 * cris/cpuv10.h: Regenerate.
545 * cris/cpuv32.h: Regenerate.
546 * cris/decodev10.c: Regenerate.
547 * cris/decodev10.h: Regenerate.
548 * cris/decodev32.c: Regenerate.
549 * cris/decodev32.h: Regenerate.
550
8f0ac700
TG
5512009-11-12 Tristan Gingold <gingold@adacore.com>
552
553 * avr/interp.c (sim_write): Allow byte access.
554 (sim_read): Ditto.
555
33bcfade
TG
5562009-11-12 Tristan Gingold <gingold@adacore.com>
557
558 * avr/interp.c (sim_load): Clear memory before loading.
559
46b51513
TG
5602009-11-09 Tristan Gingold <gingold@adacore.com>
561
562 * avr/interp.c (sim_resume): Fix typo for OP_ret.
563
f09d60e1
DE
5642009-10-23 Doug Evans <dje@sebabeach.org>
565
566 * cris/arch.c: Regenerate.
567 * cris/arch.h: Regenerate.
568 * cris/cpuall.h: Regenerate.
569 * cris/cpuv10.c: Regenerate.
570 * cris/cpuv10.h: Regenerate.
571 * cris/cpuv32.c: Regenerate.
572 * cris/cpuv32.h: Regenerate.
573 * cris/cris-desc.c: Regenerate.
574 * cris/cris-desc.h: Regenerate.
575 * cris/cris-opc.h: Regenerate.
576 * cris/decodev10.c: Regenerate.
577 * cris/decodev10.h: Regenerate.
578 * cris/decodev32.c: Regenerate.
579 * cris/decodev32.h: Regenerate.
580 * cris/modelv10.c: Regenerate.
581 * cris/modelv32.c: Regenerate.
582 * cris/semcrisv10f-switch.c: Regenerate.
583 * cris/semcrisv32f-switch.c: Regenerate.
584
244d5259
TG
5852009-10-22 Tristan Gingold <gingold@adacore.com>
586
587 * avr/interp.c (sim_stop): Return 1.
588
0a8d1bde
DE
5892009-10-16 Doug Evans <dje@sebabeach.org>
590
591 * MAINTAINERS: Add myself as m32r maintainer.
592
060916aa
ME
5932009-10-15 Michael Egaer <eager@eagercon.com>
594
595 * MAINTAINERS: Add self as MicroBlaze maintainer.
596
42c8b6b5
BE
5972009-10-14 Ben Elliston <bje@gnu.org>
598
599 * MAINTAINERS (common): Move myself to "past maintainers" section.
600
419c2fda
ME
6012009-10-06 Michael Eager <eager@eagercon.com>
602
603 * microblaze/interp.c: Add include microblaze-dis.h.
72f4393d 604
bd30e45a
ME
6052009-09-23 Michael Eager <eager@eagercon.com>
606
607 * configure: Add microblaze-*.* (not regenerated).
608 * configure.ac: Likewise.
609 * microblaze/config.in: New.
610 * microblaze/configure: Generate.
611 * microblaze/configure.ac: New.
612 * microblaze/interp.c: New.
613 * microblaze/Makefile.in: New.
614 * microblaze/microblaze.h: New.
615 * microblaze/microblaze.isa: New.
616 * microblaze/sim-main.h: New.
617 * microblaze/sysdep.h: New.
618
d6416cdc
RW
6192009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
620
81ecdfbb
RW
621 * avr/config.in: Regenerate.
622 * avr/configure: Likewise.
623 * configure: Likewise.
624 * cris/config.in: Likewise.
625 * cris/configure: Likewise.
626
d6416cdc
RW
627 * configure.ac: m4_include toplevel config/override.m4.
628 * configure: Regenerate.
629 * avr/configure: Regenerate.
630 * cris/configure: Regenerate.
631
96e946ca
RW
6322009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
633
634 * Makefile.in (datarootdir): New variable.
635
c28c63d8
JB
6362009-05-18 Jon Beniston <jon@beniston.com>
637
72f4393d
L
638 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
639 * configure.ac: Add lm32 target.
640 * lm32: New directory.
c28c63d8 641
90e2fa9c
AC
6422009-05-11 Andrew Cagney <cagney@gnu.org>
643
644 * MAINTAINERS: Orphan ppc.
645
bba258ad
KB
6462009-05-08 Kevin Buettner <kevinb@redhat.com>
647
648 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
649 m32c_signal_to_target. Change signal return values from SIGILL,
650 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
651 TARGET_SIGNAL_SEGV, etc. Fix all callers.
652
fdd6fa61
AG
6532009-04-30 Anthony Green <green@moxielogic.com>
654
655 * MAINTAINERS: Add myself for the moxie port.
656 * moxie: New directory.
657 * configure.ac: Add entry for moxie.
658 * configure: Regenerate.
659
df1756f4
TG
6602009-04-27 Tristan Gingold <gingold@adacore.com>
661
662 * avr: New directory.
663 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
664 * avr/config.in: New file, generated by autoheader.
665 * avr/configure: New file generated by autoconf.
666 * configure.ac: Add avr.
667 * configure: Regenerated.
668
89a34d1b
JM
6692009-04-17 Carlos O'Donell <carlos@codesourcery.com>
670
671 * Makefile.in: Add dummy install-pdf, html, and
672 install-html targets.
673
c10b3605
HPN
6742009-01-18 Hans-Peter Nilsson <hp@axis.com>
675
676 * cris/sim-if.c: Include errno.h.
677 (cris_start_address, cris_program_offset): New variables.
678 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
679 enums.
680 (cris_options): New options --cris-program-offset and
681 --cris-start-address.
682 (cris_option_handler): Handle new options.
683 (cris_program_offset_write, cris_set_section_offset_iterator)
684 (cris_offset_sections, cris_offset_sections): New functions.
685 (sim_load): Use cris_program_offset_write as function argument to
686 cris_load_elf_file, not sim_write.
687 (struct offsetinfo): New struct.
688 (cris_handle_interpreter): Fix typo in comment.
689 (sim_open): Call cris_offset_sections as soon as the bfd of the
690 infile is available. Gate bfd validity checks on abfd non-NULL.
691 (sim_create_inferior): Let cris_start_address when != -1 override
692 other start-address choices.
693
fc887f09
HPN
6942009-01-06 Hans-Peter Nilsson <hp@axis.com>
695
696 * cris/traps.c (abort): Define to call sim_io_error.
697 (create_map): Make -1 imply a non-fixed address, not 0. All
698 callers changed. Only prefer the next higher unmapped address if
699 the last mapped address is no less than 0x40000000. Check that
700 the address to be mapped is not already mapped. Update head
701 comment.
702 (unmap_pages): Don't call abort when recursive call fails, just
703 note and return an error if a page in the range couldn't be unmapped.
704 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
705 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
706 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
707 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
708 don't abort on page not being mapped. Handle non-anon filemap
709 with length padded to pagesize.
710
08af5ba8
HPN
7112009-01-03 Hans-Peter Nilsson <hp@axis.com>
712
a3d4b83b
HPN
713 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
714 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
715 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
716 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
717 (TARGET_AT_CLKTCK): Remove redundant macros.
718 (AUX_ENT): Adjust to use standard ELF AT_* macros.
719 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
720 callers.
721 (sim_open): Also pass AT_SECURE.
722
ddf2c972
HPN
723 * cris/sim-main.h (struct _sim_cpu): New member
724 set_target_thread_data.
725 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
726 * cris/crisv10f.c: Ditto.
727 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
728 (MY (f_specific_init)): Set new _sim_cpu member to new function.
729 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
730 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
731 case.
732
e56b67ed
HPN
733 * cris/traps.c (TARGET_SYS_exit_group): Define.
734 (cris_break_13_handler): Handle it like the exit for the last
735 thread.
736
ffc67e7a
HPN
737 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
738 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
739 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
740 2.6.27. Set machine field to the BFD printable name of the
741 machine.
742
a349c9b6 743 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
ffc67e7a
HPN
744 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
745 TARGET_MAP_DENYWRITE.
a349c9b6 746
e7fcaaa4
HPN
747 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
748 (TARGET_X_OK, TARGET_F_OK): Define.
749 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
750
08af5ba8
HPN
751 * cris/semcrisv32f-switch.c: Regenerate.
752
80e5c09e
HPN
7532008-12-30 Hans-Peter Nilsson <hp@axis.com>
754
a0956358
HPN
755 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
756 just a short CRIS-specific notice. Tweak the wording for a
757 failing architecture test.
758
c06ccdf1
HPN
759 * cris/traps.c (TARGET_SYS_writev): New macro.
760 (is_mapped_only, cris_dump_map): New functions.
761 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
762 and prot combinations and a non-zero page-offset. If
763 TARGET_MAP_FIXED, unmap pages before mapping them.
764 <case TARGET_SYS_mprotect>: When checking, allow any length
765 argument. Don't actually do anything.
766 <case TARGET_SYS_writev>: New case.
767
80e5c09e
HPN
768 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
769 * cris/sim-if.c: Include elf-bfd.h.
770 (struct progbounds): New members end_loadmem, start_nonloadmem.
771 (xprintf, eprintf): New functions, copied from common/sim-load.c.
772 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
773 (get_progbounds_iterator): Renamed from get_progbounds. Make
774 static. Update head comment. Set new struct progbounds members.
775 (exec_load_addr, interp_load_addr, interp_start_addr): New static
776 variables.
777 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
778 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
779 functions.
780 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
781 handling to use auxv_entries. Improve error message and checking
782 for invalid programs. Use new variable abfd for the program
783 instead of for each access reaching into sd to get it.
784 (sim_create_inferior): If non-zero, use interp_start_addr instead
785 of the program start address.
786 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
787 stale comment. Always specify little-endian.
788
086c6838
NC
7892008-07-29 Nick Clifton <nickc@redhat.com>
790
791 * common/genmloop.sh: Add new parameter: -shell to specify the
792 command interpreter to use to run the input file. This is
793 necessary because otherwise SHELL is taken from the user's
794 environment, and not from the makefile that invoked this script
795 and the user might not be running an sh-like shell.
796 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
797 * fr30/Makefile.in: Likewise.
798 * frv/Makefile.in: Likewise.
799 * i960/Makefile.in: Likewise.
800 * iq2000/Makefile.in: Likewise.
801 * m32r/Makefile.in: Likewise.
802
803 * frv/mloop.in: Add missing start of line comment marker.
804
8929c18c
HPN
8052008-07-11 Hans-Peter Nilsson <hp@axis.com>
806
807 * cris/configure: Regenerate to track ../common/common.m4 changes.
808 * cris/config.in: Ditto.
809
6efef468 8102008-06-06 Vladimir Prus <vladimir@codesourcery.com>
72f4393d
L
811 Daniel Jacobowitz <dan@codesourcery.com>
812 Joseph Myers <joseph@codesourcery.com>
6efef468
JM
813
814 * cris/configure: Regenerate.
815
7010a0c9
JB
8162008-05-09 Olivier Hainque <hainque@adacore.com>
817
818 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
819
84234f6d
SR
8202008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
821
822 * MAINTAINERS: Add myself as maintainer of cr16 port.
823
7c607148
SR
8242008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
825
826 Add simulator for National cr16 processor.
827 * cr16: New directory.
828 * configure.ac: Add entry for National cr16.
829 * configure: Regenerate.
830
c5fbc25b
DD
8312008-02-05 DJ Delorie <dj@redhat.com>
832
833 * configure.ac (v850): V850 now has a testsuite.
834 * configure (v850): Likewise.
835
9b254dd1
DJ
8362008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
837
838 Updated copyright notices for most files.
839
beb7a883
DD
8402007-12-19 DJ Delorie <dj@redhat.com>
841
842 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
843 cut_point.
844
c9b3544a
HPN
8452007-10-22 Hans-Peter Nilsson <hp@axis.com>
846
847 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
848 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
849 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
850 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
851 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
852 cris/semcrisv32f-switch.c: Regenerate.
853
4744ac1b
JB
8542007-08-24 Joel Brobecker <brobecker@adacore.com>
855
856 Switch the license of all files explicitly copyright the FSF
857 to GPLv3.
858
9453113a
DJ
8592007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
860
861 * Makefile.in: Add dummy "pdf" target.
862
6a4669ea
HPN
8632007-02-20 Hans-Peter Nilsson <hp@axis.com>
864
865 * cris/traps.c (dump_statistics): Change format for cycle numbers
866 to %llu and cast parameters to unsigned long long.
867
792fe9c9
TS
8682007-02-16 Thiemo Seufer <ths@mips.com>
869
870 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
871
cecb04b7
MF
8722007-01-28 Manuel Lauss <slauss@resi.at>
873
874 * configure.ac (sh64-*-*): Change to sh64*-*-*.
875 (sh-*-*): Change to sh*-*-*.
876 * configure: Regenerated.
877
20ac0504
DJ
8782007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
879
880 Updated copyright notices for most files.
881
49cbcfe9
HPN
8822006-12-20 Hans-Peter Nilsson <hp@axis.com>
883
570ee7f0
HPN
884 * Makefile.in (autoconf-common autoheader-common): Only run
885 autoheader on subdirs with a file config.in.
886
c4d800ae
HPN
887 * configure.ac (common): Make the default "yes" for all targets
888 with sim subdirs.
889 * configure: Regenerate.
890
e80204fc
HPN
891 * Makefile.in (autoconf-common autoheader-common): In documented
892 usage, say SHELL=/bin/sh.
893 (.PHONY): Add autoheader-common.
894
49cbcfe9
HPN
895 * MAINTAINERS: Add self as authorized committer for *.
896
466b1d33
HPN
8972006-10-02 Edgar E. Iglesias <edgar@axis.com>
898 Hans-Peter Nilsson <hp@axis.com>
899
900 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
901 (cris_unknown_syscall_action): Declare.
902 * cris/sim-if.c (cris_unknown_syscall_action): Define.
903 (cris_options): Add cris-unknown-syscall option.
904 (cris_option_handler): Correct comment about and error message for
905 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
906 * cris/traps.c: Include stdarg.h
907 (cris_unknown_syscall): New function.
908 (cris_break_13_handler): Instead of sim_io_eprintf and
909 sim_engine_halt, call cris_unknown_syscall to handle more or less
910 unknown syscalls. Adjust code as necessary to handle return
911 value.
912
bac25e5b
DJ
9132006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
914
915 * MAINTAINERS: Add Dave Brolley for sh64.
916
eccd787e
HPN
9172006-09-30 Hans-Peter Nilsson <hp@axis.com>
918
919 * cris/traps.c (TARGET_PIPE_BUF): New macro.
920 (cris_pipe_empty): Correct initialization of "remaining". Only
921 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
922 are written.
923
3ca4d560
HPN
9242006-09-29 Hans-Peter Nilsson <hp@axis.com>
925
926 * cris/configure.ac: Check for limits.h and sys/param.h.
927 * cris/configure, cris/config.in: Rebuild.
928 * cris/traps.c (SIM_PATHMAX): New macro.
929 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
930
ce928021
DJ
9312006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
932
933 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
934 * Makefile.in (FLAGS_TO_PASS): Include libdir.
935 * configure: Regenerated.
936
2f0122dc
DJ
9372006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
938
939 * cris/configure: Regenerated.
940
20e95c23
DJ
9412006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
942
943 * cris/configure: Regenerated.
944
4b164edf
AS
9452006-05-05 Andreas Schwab <schwab@suse.de>
946
947 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
948 * configure: Regenerate.
949
950 * Makefile.in (CFLAGS_FOR_BUILD): Define.
951 (CC_FOR_BUILD): Don't override.
952 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
953
8b2f7496
DJ
9542006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
955
956 * MAINTAINERS: Add an "Authorized committers" section, and list
957 DJ Delorie for v850.
958
5cf3f6e2
HPN
9592006-04-08 Hans-Peter Nilsson <hp@axis.com>
960
961 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
962
aad3b3cb
HPN
9632006-04-03 Hans-Peter Nilsson <hp@axis.com>
964
965 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
966 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
967 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
968 (all): Depend on rvdummy$(EXEEXT).
969 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
970 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
971 default off.
972 * cris/configure: Regenerate.
973 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
974 (enum cris_interrupt_type, crisv10deliver_interrupt)
975 (crisv32deliver_interrupt: New declarations.
976 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
977 sim_events_tickn and set state-events member work_pending when it's
978 time for the next event.
979 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
980 interrupt-delivery function.
981 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
982 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
983 * cris/devices.c: Include hw-device.h.
984 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
985 (device_io_write_buffer): Only perform 0x900000xx-functions if
986 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
987 call hw_io_write_buffer. Add return 0 last in function.
988 * cris/sim-if.c (cris_have_900000xxif): Now global.
989 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
990 Force "-model" option, effectively.
991 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
992 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
993
530d5813
HPN
9942006-04-02 Hans-Peter Nilsson <hp@axis.com>
995
996 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
997 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
998 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
999
1f810f78
DD
10002006-03-13 DJ Delorie <dj@redhat.com>
1001
1002 * MAINTAINERS: Add self as m32c sim maintainer.
1003
d022998d
HPN
10042006-02-23 Hans-Peter Nilsson <hp@axis.com>
1005
1006 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
1007 mapping.
1008 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
1009
d45a4bef
JB
10102006-01-23 Jim Blandy <jimb@redhat.com>
1011
1012 Add simulator for Renesas M32C and M16C.
1013
1014 * m32c: New directory.
1015 * configure.ac: Add entry for Renesas M32C.
1016 * configure: Regenerate.
1017
4fc9958a
HPN
10182006-01-10 Hans-Peter Nilsson <hp@axis.com>
1019
ca47226b
HPN
1020 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
1021 cycle count for the current insn.
4fc9958a 1022
be37be02
HPN
10232005-12-06 Hans-Peter Nilsson <hp@axis.com>
1024
1025 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1026 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1027 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1028 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1029
cf2bf87e
HPN
10302005-12-05 Hans-Peter Nilsson <hp@axis.com>
1031
1032 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1033 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1034 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1035 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1036 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1037 cris/semcrisv32f-switch.c: Regenerate.
1038
8b9b39f4
HPN
10392005-11-20 Hans-Peter Nilsson <hp@axis.com>
1040
59e834e4 1041 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
8b9b39f4
HPN
1042 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1043 TARGET_O_WRONLY.
1044 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1045 F_GETFL on fd 0, 1 and 2.
1046
5457266c
HPN
10472005-11-17 Hans-Peter Nilsson <hp@axis.com>
1048
ed1f044a
HPN
1049 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1050 last_open_fd, last_open_flags.
1051 * cris/traps.c: Don't include targ-vals.h.
1052 (TARGET_O_ACCMODE): Define.
1053 (cris_break_13_handler): Set new _sim_cpu members.
1054 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1055 Rearrange code as switch. Emit "unimplemented" abort for
1056 unimplemented fcntl calls.
1057
5457266c
HPN
1058 * cris/traps.c (TARGET_SYS_stat): Define.
1059 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1060 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1061
ae81c235
HPN
10622005-11-16 Hans-Peter Nilsson <hp@axis.com>
1063
1064 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1065 low 32 bits are used after an unsigned long cast.
1066
c3182514
HPN
10672005-05-28 Hans-Peter Nilsson <hp@axis.com>
1068
1069 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1070
d81ffbc4
CD
10712005-05-26 Chris Demetriou <cgd@netbsd.org>
1072
1073 * MAINTAINERS: Update my mail address, move myself to the
1074 "Past maintainers" section.
1075
c3357c64
CV
10762005-05-17 Corinna Vinschen <vinschen@redhat.com>
1077
1078 * configure.ac: Add igen to v850 build.
1079 * configure: Regenerate.
1080
33aa0cbb
PB
10812005-04-29 Paul Brook <paul@codesourcery.com>
1082
44cd25cf 1083 * common/callback.c (PIPE_BUF): Provide default definition.
33aa0cbb
PB
1084 (os_lstat): Use stat if lstat is not available on the host.
1085 (os_ftruncate): Return EINVAL if not available on the host.
1086 (os_truncate): Ditto.
1087 * common/configure.ac: Check for lstat, truncate and ftruncate.
1088 * common/configure: Regenerate.
1089 * common/config.in: Regenerate.
1090
4ec242d7
PB
10912005-04-27 Paul Brook <paul@codesourcery.com>
1092
1093 * common/Make-common.in: Add $(EXEEXT) to "run".
1094
69308976
HPN
10952005-04-18 Hans-Peter Nilsson <hp@axis.com>
1096
1097 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1098 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
72f4393d 1099 implemented. In call to create_map, pad length argument to 8k.
69308976 1100
21bc7567
CV
11012005-04-15 Corinna Vinschen <vinschen@redhat.com>
1102
1103 * configure.ac: Add explicit sh64 case.
1104 * configure: Regenerate.
1105
74ec5579
PB
11062005-03-30 Paul Brook <paul@codesourcery.com>
1107
1108 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1109
2ecb8390
HPN
11102005-03-24 Hans-Peter Nilsson <hp@axis.com>
1111
cce0efb5
HPN
1112 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1113 include cgen-ops.h in decodev10.c and decodev32.c.
1114 * cris/sim-main.h: Don't include cgen-ops.h here.
1115 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1116 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1117 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1118 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1119 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1120 cris/semcrisv32f-switch.c: Regenerate.
1121
2ecb8390
HPN
1122 * cris/traps.c (cris_break_13_handler) <case
1123 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1124 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1125
2b193c4a
MK
11262005-03-23 Mark Kettenis <kettenis@gnu.org>
1127
1128 * cris/configure: Regenerate.
1129
51216631
JB
11302005-02-28 Jim Blandy <jimb@redhat.com>
1131
1132 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1133 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1134 Regenerated, after change to common/aclocal.m4.
1135
edece237
CV
11362005-02-18 Corinna Vinschen <vinschen@redhat.com>
1137
1138 * iq2000: New target subdirectory.
1139 * configure.ac: Add iq2000 target.
1140 * configure: Regenerate.
1141
8bdcadb1
HPN
11422005-01-29 Hans-Peter Nilsson <hp@axis.com>
1143
1144 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1145 (realclean, install): Fail if subdir make failed.
1146
f6bcefef
HPN
11472005-01-28 Hans-Peter Nilsson <hp@axis.com>
1148
1149 * cris: New directory, simulator for Axis Communications CRIS
1150 including CRIS v32, CGEN-based.
1151 * configure.ac: Add corresponding configury.
1152 * configure: Regenerate.
1153
4ac6917f
AC
11542005-01-17 Andrew Cagney <cagney@gnu.org>
1155
1156 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1157 common directory. Remove sparc*-*-* from list.
72f4393d 1158
38f48d72
AC
11592005-01-11 Andrew Cagney <cagney@gnu.org>
1160
1161 * Makefile.in (autoconf-common autoheader-common): Add --force to
1162 autoconf and autoheader.
1163 (autoconf-common autoheader-common)
1164 (autoconf-install autoheader-install): Check for configure.ac, not
1165 configure.in.
1166 * configure.ac: Delete AC_CONFIG_AUX_DIR.
1167 * configure: Re-generate.
1168
b7026657
AC
11692005-01-07 Andrew Cagney <cagney@gnu.org>
1170
1171 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
1172 correctly calls AC_CONFIG_SUBDIRS.
1173 * configure: Re-generate.
1174
33841fd9
AC
11752004-12-01 Andrew Cagney <cagney@gnu.org>
1176
44b263ce 1177 * i960, h8500: Delete directory.
33841fd9 1178
c46ec85d
AC
11792004-11-12 Andrew Cagney <cagney@gnu.org>
1180
1181 * d30v, fr30, mn10200, z8k: Delete directory.
1182
523f6a27
BE
11832004-03-10 Ben Elliston <bje@gnu.org>
1184
1185 * MAINTAINERS: Update my mail address.
1186
df0a8012
CD
11872004-01-26 Chris Demetriou <cgd@broadcom.com>
1188
1189 * configure.in (mips*-*-*): Configure in testsuite.
1190 * configure: Regenerate.
1191
b4ab4027
DB
11922003-10-08 Dave Brolley <brolley@redhat.com>
1193
1194 * configure.in: Move frv handling to alphabetically correct placement.
1195
fb72cee0
AS
11962003-09-03 Andreas Schwab <schwab@suse.de>
1197
1198 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1199
b3af7bdf
DB
12002003-08-29 Dave Brolley <brolley@redhat.com>
1201
1202 * MAINTAINERS: Add myself as maintainer of the FRV port.
1203
84fabdf6 12042003-08-20 Michael Snyder <msnyder@redhat.com>
72f4393d 1205 Dave Brolley <brolley@redhat.com>
84fabdf6 1206
b3af7bdf 1207 * frv/: New directory, simulator for the Fujitsu FRV.
84fabdf6
DB
1208 * configure.in: Add frv configury.
1209 * configure: Regenerate.
1210
c53d60d8
BE
12112003-08-10 Ben Elliston <bje@wasabisystems.com>
1212
1213 * MAINTAINERS: Update my mail address.
1214
c55433ef
AC
12152003-08-09 Andrew Cagney <cagney@redhat.com>
1216
1217 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1218 maintenance. List igen and sh maintainers. Mention that target
1219 and global maintainers pick up the slack.
1220
ac78c4ba
MS
12212003-07-09 Michael Snyder <msnyder@redhat.com>
1222
1223 * configure.in: Add testsuite to extra_subdirs for sh.
1224 * configure: Regenerate.
1225
2bc8946d
NC
12262003-01-23 Nick Clifton <nickc@redhat.com>
1227
1228 * Add sh2e support:
1229
ac78c4ba 12302002-04-02 Alexandre Oliva <aoliva@redhat.com>
2bc8946d 1231
ac78c4ba 1232 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
2bc8946d 1233
a926ab2f
GK
12342002-08-24 Geoffrey Keating <geoffk@redhat.com>
1235
1236 * MAINTAINERS: Update my email address.
1237
de0a1e42
AC
12382002-07-17 Andrew Cagney <ac131313@redhat.com>
1239
1240 * w65/: Delete directory.
1241
7a3085c1
AC
12422002-07-16 Andrew Cagney <ac131313@redhat.com>
1243
1244 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1245 * configure: Re-generate.
1246
3fbeef0b
AC
12472002-07-13 Andrew Cagney <ac131313@redhat.com>
1248
1249 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1250 * configure: Re-generate.
72f4393d 1251
3832c25c
AC
12522002-06-16 Andrew Cagney <ac131313@redhat.com>
1253
1254 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1255 id, date and host to be overriden by NAME, ID, DATE and HOST
1256 respectfully. Use ISO dates.
1257
c93abbcc
AC
1258Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
1259
1260 * Makefile.in (ChangeLog): New makefile variable.
1261 * README-HACKING: Mention the ChangeLog makefile variable.
1262
e4045cdb
AC
12632002-06-01 Andrew Cagney <ac131313@redhat.com>
1264
1265 * tic80/: Delete directory.
1266
2be99286
SC
12672002-05-16 Stephane Carrez <stcarrez@nerim.fr>
1268
1269 * MAINTAINERS: Update my email address.
1270
44befb9f
SC
12712002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
1272
1273 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1274
ce93e51a
FCE
12752002-03-01 Frank Ch. Eigler <fche@redhat.com>
1276
1277 * MAINTAINERS: Record self as a co-maintainer of just common/.
1278
72ca629f
NC
12792002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
1280
1281 * MAINTAINERS: Point to GDB files describing overall maintaince
1282 and check-in procedures.
1283
00125dd0
NC
12842002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
1285
1286 * MAINTAINERS: Add myself for ARM portions.
1287
457174f6
AC
12882001-10-19 Andrew Cagney <ac131313@redhat.com>
1289
1290 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1291 * configure: Re-generate.
1292
9afc4bbf
BE
12932001-02-16 Ben Elliston <bje@redhat.com>
1294
1295 * MAINTAINERS: Add myself for common portions.
1296
0b8c7076
CD
12972001-01-15 Chris Demetriou <cgd@broadcom.com>
1298
1299 * MAINTAINERS: Added self and Andrew for the mips sim.
1300
c56a7a95
GK
13012000-10-25 Geoff Keating <geoffk@cygnus.com>
1302
1303 * MAINTAINERS: Added self and Andrew for the ppc sim.
1304
5d031c16
AC
1305Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
1306
1307 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1308 * m68hc11: New directory.
1309 * configure.in: Add.
1310 * configure: Regenerate.
1311
6c29acca
AC
1312Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1313
1314 * tic80: New directory.
1315 * configure.in: Add configury.
1316 * configure: Regenerate.
1317
bcd65766
NC
13182000-04-20 Nick Clifton <nickc@cygnus.com>
1319
1320 * configure.in (extra_subdirs): Add testsuite to strongarm
72f4393d 1321 directories.
bcd65766
NC
1322 * configure: Regenerate.
1323
7158fd7f
AC
1324Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1325
1326 * MAINTAINERS: New file. Blank.
1327
c2d11a7d
JM
13281999-11-18 Ben Elliston <bje@cygnus.com>
1329
1330 * configure.in: Require autoconf 2.13 and remove obsolete
1331 invocation of AC_C_CROSS.
1332 * configure: Regenerate.
1333
2acceee2
JM
13341999-09-29 Doug Evans <devans@casey.cygnus.com>
1335
1336 * configure.in: Configure the testsuite directory for thumb.
1337 * configure: Regenerate.
1338
6426a772
JM
13391999-07-16 Ben Elliston <bje@cygnus.com>
1340
1341 * configure.in: Configure the testsuite directory for arm.
1342 * configure: Regenerate.
1343
7a292a7a
SS
13441999-04-08 Nick Clifton <nickc@cygnus.com>
1345
1346 * configure.in: Add support for MCore target.
1347 * configure: Regenerate.
1348
c906108c
SS
13491999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1350
1351 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1352 RUNTEST instead of commenting out, fixes portability problem.
1353
c906108c
SS
13541999-02-08 Nick Clifton <nickc@cygnus.com>
1355
1356 * configure.in: Add support for StrongARM target.
1357 * configure: Regenerate.
1358
c906108c
SS
13591999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1360
1361 * configure.in: Require autoconf 2.12.1 or higher.
1362
13631998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1364
1365 * configure.in (i960-*-*): Add.
1366 * configure: Rebuild.
1367
1368Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1369
1370 * configure.in: Added case for fr30-*-*.
1371 * configure: Regenerated.
1372
1373Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1374
1375 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1376 to allow successful operation on Windows.
1377
1378Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1379
25c1c397
JM
1380 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1381 check can be invoked recursively.
c906108c
SS
1382
1383Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1384
1385 * configure.in: Build simulator on sparclite and sparc86x targets.
1386 * configure: Regenerate.
1387
1388Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1389
1390 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1391 to autoconf and autoheader.
1392
1393Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1394
1395 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1396 ../common' to autoconf and autoheader. Unconditionally run
1397 autoconf in every subdir.
1398 (autoconf-changelog autoheader-changelog): Unconditionally run
1399 commands in every subdir.
1400 (autoconf-install autoheader-install): Likewise.
1401
1402Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1403
1404 * Makefile.in: Get SHELL from configure.
1405 * (FLAGS_TO_PASS): Pass down SHELL.
1406 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1407 NT native builds.
1408
1409Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1410
1411 * configure.in (extra_subdirs): Enable igen for mn10300.
1412 * configure: Re-generate.
1413
1414Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1415
1416 * configure.in (extra_subdirs): Add support for thumb target.
1417
1418 * configure (extra_subdirs): Add support for thumb target.
1419
1420Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1421
1422 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1423 target.
1424 * configure: Regenerate.
72f4393d 1425
c906108c
SS
1426Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1427
1428 * configure.in (extra_subdirs): v850ea needs igen.
1429 * configure: Re-generate.
72f4393d 1430
c906108c
SS
1431Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1432
1433 * configure.in (testdir): When a testsuite directory, add that to
1434 the list of confdirs.
1435
1436Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1437
1438 * configure.in (extra_subdirs): Enable igen ready for V850.
1439
1440Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1441
1442 * configure.in (w65-*-*, only_if_enabled): Set.
1443 * configure: Re-generate.
72f4393d 1444
c906108c
SS
1445Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1446
1447 * configure.in (sparc*-*-*, only_if_enabled): Set
1448 only_if_enabled=yes. Check only_if_enabled before enabling a
1449 simulator.
1450 * configure: Regenerate.
72f4393d 1451
c906108c
SS
1452Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1453
1454 * configure.in (extra_subdirs): Add v850e target.
1455
1456Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1457
1458 * configure.in (extra_subdirs): Add v850ea target.
1459
1460Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1461
1462 * configure.in (sparc*-*-*): Don't build erc32.
1463 * configure: Regenerate.
1464
1465Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1466
1467 * configure.in (m32r-*-*): New target.
1468 * configure: Regenerate.
1469
1470 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1471
1472Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1473
1474 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1475 thought that .NOEXPORT was the default target.
1476
1477Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1478
1479 * Makefile.in (clean mostlyclean): Restore targets accidentally
1480 deleted in earlier change.
1481
1482Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1483
1484 * Makefile.in (autoheader-common, autoheader-changelog,
1485 autoheader-install): Perform autoheader in addition to autoconf.
1486
1487Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1488
1489 * Makefile.in (autoconf-install): New target.
1490 (autoconf-changelog): Try different way to obtain user name.
1491
1492Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1493
1494 * Makefile.in (autoconf-changelog): New target, update
1495 ChangeLog for all subdirectories - normally used after
1496 autoconf-common target.
1497
1498Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1499
1500 * configure.in (extra_subdirs): Include testsuite for d30v.
1501 * configure: Regenerate.
72f4393d 1502
c906108c
SS
1503 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1504 ../gdb/Makefile.in
1505 (check): New rules - drive the testsuite.
1506
1507Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1508
1509 * configure.in: Add mn10200 configure lines accidentally
1510 removed.
1511 * configure: Regenerated.
1512
1513Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1514
1515 * configure.in (extra_subdirs): Generalize common sub directory
1516 into a list.
1517 (extra_subdirs): For d30v add igen to the list to be built.
1518
1519Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1520
1521 * configure.in (d30v): New target.
1522 * configure: Regenerated.
72f4393d 1523
c906108c
SS
1524Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1525
1526 * configure.in: Don't require GCC to build the mn10200
1527 simulator anymore.
1528 * configure: Rebuilt.
1529
1530Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1531
1532 * configure.in: Don't configure any subdirs if no simulator
1533 is being built. Don't use erc32 for sparc64.
1534 * configure: Regenerated.
1535
1536Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1537
1538 * Makefile.in (autoconf-common): New target.
1539 * configure.in: Do configure common.
1540 * configure: Regenerated.
1541
1542Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1543
1544 * configure configure.in: Don't configure common anymore. Files
1545 from common are now built in the individual simualtor directories.
1546 This fixes problems with the WinGDB build procedure.
1547
1548Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1549
1550 * configure: Enable the mn10200 simulator.
1551
1552Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1553
1554 * configure.in (configdirs): Add common.
1555 * configure: Regenerated.
1556
1557Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1558
1559 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1560 system V based targets.
1561 * configure: Regenerate.
1562
1563Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1564
1565 * configure.in (--enable-sim-powerpc): Delete.
1566 (--enable-sim): Add.
1567 * configure: Regenerated.
1568
1569Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1570
1571 * configure.in: Only build the V850 simulator if
1572 we are using gcc.
1573 * configure: Rebuild.
1574
1575Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1576
1577 * configure.in: Do build erc32 for DOS and Windows hosts.
1578 * configure: Rebuild.
1579
1580Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1581
1582 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1583 be inherited from the parent. Remove INSTALL_XFORM and
1584 INSTALL_XFORM1. Make INSTALL be set from configure.
1585
1586Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1587
1588 * configure.in: Only build the MIPS simulator if we are using
1589 gcc.
1590 * configure: Rebuild.
1591
1592Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1593
1594 * configure.in (v850-*-*): Added V850 simulator.
1595
1596Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1597
1598 * configure.in (d10v-*-*): Added D10V simulator.
1599
1600Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1601
1602 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1603 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1604 (docdir): Removed.
1605 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1606 (AC_PROG_INSTALL): Added.
1607 * configure: Rebuilt.
1608
1609Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1610
1611 * configure.in: Only configure erc32 if using gcc.
1612 * configure: Rebuild.
1613
1614Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1615
1616 * configure.in (sim_target): Build PowerPC simulator for powerpc
1617 System V.4, Solaris, and Elf targets.
1618 * configure: Regenerate with autoconf 2.10.
1619
1620Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1621
1622 * configure.in: Only built erc32 simulator on Unix hosts as it
1623 uses pseudo ttys.
1624 * configure: Regenerated with autoconf 2.8.
1625
1626Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1627
1628 * erc32: Sparc simulator from the ESA.
1629
1630Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1631
1632 From: Miles Bader <miles@gnu.ai.mit.edu>
1633 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1634 * configure: Regenerate using autoconf.
1635
1636Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1637
1638 * Makefile.in (install): Fix typo.
1639
1640Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1641
1642 * configure: Regenerate with autoconf 2.7.
1643
1644 * Makefile.in (all): Simplify.
1645 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1646 as in the all target.
1647 (distclean, maintainer-clean, realclean): Likewise.
1648 (install): Likewise.
1649
1650Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1651
1652 * Makefile.in (all): Remove extra '\' char from shell script.
1653
1654Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1655
1656 * Makefile.in (all): Avoid a for loop with zero elements, even if
1657 the loop will not be executed because of an if statement.
1658
1659Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1660
1661 * Makefile.in (install): Add missing semicolon in "fi \".
1662
1663Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1664
1665 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1666 defaults from configure.
1667
1668 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1669 configure defaults.
1670 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1671 if either --enable-sim-powerpc is used, or the host compiler is
1672 GCC.
1673
1674Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1675
1676 * configure.in (mips*-*-*): Added "mips" simulator target.
1677 * configure: Re-generated.
1678
1679Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1680
1681 * Makefile.in (BISON): Remove macro.
1682 (FLAGS_TO_PASS): Remove BISON.
1683
1684Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1685
1686 * configure.in: Explicitly `exit 0' for broken shells.
1687 * configure: Rebuilt.
1688
1689Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1690
1691 * common/run.c (main): Initialize the callbacks.
1692
1693Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1694
1695 * Makefile.in (maintainer-clean): New synonym for realclean.
1696
1697Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1698
1699 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1700 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1701
1702Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1703
1704 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1705 <cagney@highland.com.au>.
1706 * configure: Regnerate from configure.in.
1707
1708Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1709
1710 * Update all FSF addresses except those in COPYING* files.
1711
1712Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1713
1714 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1715 submakes either default or passed in value.
1716
1717Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1718
1719 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1720 install): Changed targets so that they descend all
1721 subdirectories in $(SUBDIRS).
1722 (*-all, *-clean, *-install): Removed targets.
1723
1724 * configure.in: Don't bother with target makefile fragments, they
1725 are no longer needed.
1726 * configure: regenerated.
1727
1728 * Makefile.in, configure.in: converted to autoconf.
1729 * configure: New file, generated with autconf 2.4.
1730
1731Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1732
1733 * Makefile.in: Support ARM.
1734 * configure.in: Ditto.
1735
1736Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1737
1738 * Makefile.in: Support W65.
1739 * configure.in: Ditto.
1740
1741Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1742
1743 * Makefile.in: Add TAGS target.
1744
1745Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1746
1747 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1748 install-h8300, clean-h8300, all-h8500, install-h8500,
1749 clean-h8500, all-sh, install-sh, clean-sh): do not echo
a9e0ce2c 1750 recursion lines.
c906108c
SS
1751
1752Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1753
1754 * Makefile.in: remove endian.h trace from h8500
1755
1756Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1757
1758 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1759
1760Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1761
1762 * Makefile.in: make all of the all-* target (except all-nothing)
1763 depend on endian.h, so that if we're not building a simulator, we
1764 don't built endian
1765
1766Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1767
1768 * Makefile.in (check, installcheck): Added dummy targets.
1769
1770Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1771
1772 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1773 explicitly make it, since some makes apparently don't work with
1774 VPATH and .c to executable rules (SunOS make for example).
1775
1776Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1777
1778 * Makefile.in (endian): Add explicit rule for broken makes.
1779
1780Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1781
1782 * Makefile.in (info, install-info): New targets.
1783 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1784 level Makefile.
1785
1786Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1787
1788 * Makefile.in (endian.h): build endian.h via a temporary file so
1789 that we don't leave an incomplete file lying around on
1790 interrupted builds.
1791 (clean): remove endian, e.h, and endian.h.
1792
1793Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1794
1795 * Makefile.in, configure.in: if target isn't supported, build a
1796 harmless makefile.
1797
1798
This page took 0.950352 seconds and 4 git commands to generate.