From: Matt Ranostay Date: Mon, 14 Sep 2015 03:26:14 +0000 (-0700) Subject: iio: chemical: add SGX VZ89x VOC sensor support X-Git-Url: http://git.efficios.com/?p=deliverable%2Flinux.git;a=commitdiff_plain;h=cd8d97774f23c601d0ed66b5035bcc77dd665b10 iio: chemical: add SGX VZ89x VOC sensor support Add support for VZ89X sensors VOC and CO2 reporting channels in percentage which can be converted to part per million. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x new file mode 100644 index 000000000000..c0c1ea924535 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_VOC_short_raw +Date: September 2015 +KernelVersion: 4.3 +Contact: Matt Ranostay +Description: + Get the raw calibration VOC value from the sensor. + This value has little application outside of calibration. diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index e1c07dd8792d..ed7ef4684aa3 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -88,6 +88,7 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) +sgx,vz89x SGX Sensortech VZ89X Sensors sii,s35390a 2-wire CMOS real-time clock skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st-micro,24c256 i2c serial eeprom (24cxx) diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 6fe0d6524c9c..119c94df2b9e 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -47,6 +47,7 @@ config IIO_TRIGGERED_EVENT source "drivers/iio/accel/Kconfig" source "drivers/iio/adc/Kconfig" source "drivers/iio/amplifiers/Kconfig" +source "drivers/iio/chemical/Kconfig" source "drivers/iio/common/Kconfig" source "drivers/iio/dac/Kconfig" source "drivers/iio/frequency/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 40995f366843..e2100554e3b4 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -13,6 +13,7 @@ obj-y += accel/ obj-y += adc/ obj-y += amplifiers/ obj-y += buffer/ +obj-y += chemical/ obj-y += common/ obj-y += dac/ obj-y += gyro/ diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig new file mode 100644 index 000000000000..3061b7299f0f --- /dev/null +++ b/drivers/iio/chemical/Kconfig @@ -0,0 +1,15 @@ +# +# Chemical sensors +# + +menu "Chemical Sensors" + +config VZ89X + tristate "SGX Sensortech MiCS VZ89X VOC sensor" + depends on I2C + help + Say Y here to build I2C interface support for the SGX + Sensortech MiCS VZ89X VOC (Volatile Organic Compounds) + sensors + +endmenu diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile new file mode 100644 index 000000000000..7292f2ded587 --- /dev/null +++ b/drivers/iio/chemical/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for IIO chemical sensors +# + +# When adding new entries keep the list in alphabetical order +obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c new file mode 100644 index 000000000000..b45420039ca2 --- /dev/null +++ b/drivers/iio/chemical/vz89x.c @@ -0,0 +1,237 @@ +/* + * vz89x.c - Support for SGX Sensortech MiCS VZ89X VOC sensors + * + * Copyright (C) 2015 Matt Ranostay + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include +#include + +#define VZ89X_REG_MEASUREMENT 0x09 +#define VZ89X_REG_MEASUREMENT_SIZE 6 + +#define VZ89X_VOC_CO2_IDX 0 +#define VZ89X_VOC_SHORT_IDX 1 +#define VZ89X_VOC_TVOC_IDX 2 +#define VZ89X_VOC_RESISTANCE_IDX 3 + +struct vz89x_data { + struct i2c_client *client; + struct mutex lock; + unsigned long last_update; + + u8 buffer[VZ89X_REG_MEASUREMENT_SIZE]; +}; + +static const struct iio_chan_spec vz89x_channels[] = { + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_CO2, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), + .address = VZ89X_VOC_CO2_IDX, + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .address = VZ89X_VOC_SHORT_IDX, + .extend_name = "short", + }, + { + .type = IIO_CONCENTRATION, + .channel2 = IIO_MOD_VOC, + .modified = 1, + .info_mask_separate = + BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW), + .address = VZ89X_VOC_TVOC_IDX, + }, + { + .type = IIO_RESISTANCE, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .address = VZ89X_VOC_RESISTANCE_IDX, + }, +}; + +static IIO_CONST_ATTR(in_concentration_co2_scale, "0.00000698689"); +static IIO_CONST_ATTR(in_concentration_voc_scale, "0.00000000436681223"); + +static struct attribute *vz89x_attributes[] = { + &iio_const_attr_in_concentration_co2_scale.dev_attr.attr, + &iio_const_attr_in_concentration_voc_scale.dev_attr.attr, + NULL, +}; + +static const struct attribute_group vz89x_attrs_group = { + .attrs = vz89x_attributes, +}; + +static int vz89x_get_measurement(struct vz89x_data *data) +{ + int ret; + int i; + + /* sensor can only be polled once a second max per datasheet */ + if (!time_after(jiffies, data->last_update + HZ)) + return 0; + + ret = i2c_smbus_write_word_data(data->client, + VZ89X_REG_MEASUREMENT, 0); + if (ret < 0) + return ret; + + for (i = 0; i < VZ89X_REG_MEASUREMENT_SIZE; i++) { + ret = i2c_smbus_read_byte(data->client); + if (ret < 0) + return ret; + data->buffer[i] = ret; + } + + data->last_update = jiffies; + + return 0; +} + +static int vz89x_get_resistance_reading(struct vz89x_data *data) +{ + u8 *buf = &data->buffer[VZ89X_VOC_TVOC_IDX]; + + return buf[0] | (buf[1] << 8) | (buf[2] << 16); +} + +static int vz89x_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, + int *val2, long mask) +{ + struct vz89x_data *data = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->lock); + ret = vz89x_get_measurement(data); + mutex_unlock(&data->lock); + + if (ret) + return ret; + + switch (chan->address) { + case VZ89X_VOC_CO2_IDX: + case VZ89X_VOC_SHORT_IDX: + case VZ89X_VOC_TVOC_IDX: + *val = data->buffer[chan->address]; + return IIO_VAL_INT; + case VZ89X_VOC_RESISTANCE_IDX: + *val = vz89x_get_resistance_reading(data); + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_RESISTANCE: + *val = 10; + return IIO_VAL_INT; + default: + return -EINVAL; + } + break; + case IIO_CHAN_INFO_OFFSET: + switch (chan->address) { + case VZ89X_VOC_CO2_IDX: + *val = 44; + *val2 = 250000; + return IIO_VAL_INT_PLUS_MICRO; + case VZ89X_VOC_TVOC_IDX: + *val = -13; + return IIO_VAL_INT; + default: + return -EINVAL; + } + } + + return ret; +} + +static const struct iio_info vz89x_info = { + .attrs = &vz89x_attrs_group, + .read_raw = vz89x_read_raw, + .driver_module = THIS_MODULE, +}; + +static int vz89x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct vz89x_data *data; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BYTE)) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + data->last_update = jiffies - HZ; + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &vz89x_info, + indio_dev->name = dev_name(&client->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + + indio_dev->channels = vz89x_channels; + indio_dev->num_channels = ARRAY_SIZE(vz89x_channels); + + return devm_iio_device_register(&client->dev, indio_dev); +} + +static const struct i2c_device_id vz89x_id[] = { + { "vz89x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, vz89x_id); + +static const struct of_device_id vz89x_dt_ids[] = { + { .compatible = "sgx,vz89x" }, + { } +}; +MODULE_DEVICE_TABLE(of, vz89x_dt_ids); + +static struct i2c_driver vz89x_driver = { + .driver = { + .name = "vz89x", + .of_match_table = of_match_ptr(vz89x_dt_ids), + }, + .probe = vz89x_probe, + .id_table = vz89x_id, +}; +module_i2c_driver(vz89x_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("SGX Sensortech MiCS VZ89X VOC sensors"); +MODULE_LICENSE("GPL v2");