From ac8aa11e3d184b4fee37f11b374799447d7f5fb5 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Fri, 9 Sep 2016 12:51:27 +0800 Subject: [PATCH] usb: dwc3: fix Clear Stall EP command failure commit 5e6c88d28ccbe72bedee1fbf4f9fea4764208598 upstream. Commit 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command") sets ClearPendIN bit for all IN endpoints of v2.60a+ cores. This causes ClearStall command fails on 2.60+ cores operating in HighSpeed mode. In page 539 of 2.60a specification: "When issuing Clear Stall command for IN endpoints in SuperSpeed mode, the software must set the "ClearPendIN" bit to '1' to clear any pending IN transcations, so that the device does not expect any ACK TP from the host for the data sent earlier." It's obvious that we only need to apply this rule to those IN endpoints that currently operating in SuperSpeed mode. Fixes: 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command") Signed-off-by: Lu Baolu Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/gadget.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 122e64df2f4d..68544618982e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -348,7 +348,8 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) * IN transfers due to a mishandled error condition. Synopsys * STAR 9000614252. */ - if (dep->direction && (dwc->revision >= DWC3_REVISION_260A)) + if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) && + (dwc->gadget.speed >= USB_SPEED_SUPER)) cmd |= DWC3_DEPCMD_CLEARPENDIN; memset(¶ms, 0, sizeof(params)); -- 2.34.1