Commit | Line | Data |
---|---|---|
5d7e7d47 EH |
1 | What: /sys/class/hidraw/hidraw*/device/speed |
2 | Date: April 2010 | |
3 | Kernel Version: 2.6.35 | |
4 | Contact: linux-bluetooth@vger.kernel.org | |
5 | Description: | |
6 | The /sys/class/hidraw/hidraw*/device/speed file controls | |
7 | reporting speed of Wacom bluetooth tablet. Reading from | |
8 | this file returns 1 if tablet reports in high speed mode | |
9 | or 0 otherwise. Writing to this file one of these values | |
10 | switches reporting speed. | |
11 | ||
12 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led | |
13 | Date: August 2011 | |
14 | Contact: linux-input@vger.kernel.org | |
15 | Description: | |
09e7d941 PC |
16 | Attribute group for control of the status LEDs and the OLEDs. |
17 | This attribute group is only available for Intuos 4 M, L, | |
246835fc JG |
18 | and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD |
19 | (LEDs only). Therefore its presence implicitly signifies the | |
20 | presence of said LEDs and OLEDs on the tablet device. | |
5d7e7d47 EH |
21 | |
22 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance | |
23 | Date: August 2011 | |
24 | Contact: linux-input@vger.kernel.org | |
25 | Description: | |
77e82516 | 26 | Writing to this file sets the status LED luminance (1..127) |
5d7e7d47 | 27 | when the stylus does not touch the tablet surface, and no |
f4fa9a6d PC |
28 | button is pressed on the stylus. This luminance level is |
29 | normally lower than the level when a button is pressed. | |
5d7e7d47 EH |
30 | |
31 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance | |
32 | Date: August 2011 | |
33 | Contact: linux-input@vger.kernel.org | |
34 | Description: | |
77e82516 | 35 | Writing to this file sets the status LED luminance (1..127) |
5d7e7d47 EH |
36 | when the stylus touches the tablet surface, or any button is |
37 | pressed on the stylus. | |
38 | ||
09e7d941 | 39 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select |
5d7e7d47 EH |
40 | Date: August 2011 |
41 | Contact: linux-input@vger.kernel.org | |
42 | Description: | |
09e7d941 | 43 | Writing to this file sets which one of the four (for Intuos 4) |
246835fc JG |
44 | or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status |
45 | LEDs is active (0..3). The other three LEDs on the same side are | |
46 | always inactive. | |
09e7d941 PC |
47 | |
48 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select | |
49 | Date: September 2011 | |
50 | Contact: linux-input@vger.kernel.org | |
51 | Description: | |
246835fc JG |
52 | Writing to this file sets which one of the left four (for Cintiq 21UX2 |
53 | and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on | |
54 | the left are always inactive. | |
5d7e7d47 EH |
55 | |
56 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance | |
57 | Date: August 2011 | |
58 | Contact: linux-input@vger.kernel.org | |
59 | Description: | |
60 | Writing to this file sets the overall luminance level (0..15) | |
61 | of all eight button OLED displays. | |
62 | ||
63 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg | |
64 | Date: August 2011 | |
65 | Contact: linux-input@vger.kernel.org | |
66 | Description: | |
67 | When writing a 1024 byte raw image in Wacom Intuos 4 | |
68 | interleaving format to the file, the image shows up on Button N | |
69 | of the device. The image is a 64x32 pixel 4-bit gray image. The | |
70 | 1024 byte binary is split up into 16x 64 byte chunks. Each 64 | |
71 | byte chunk encodes the image data for two consecutive lines on | |
72 | the display. The low nibble of each byte contains the first | |
73 | line, and the high nibble contains the second line. |