Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | ADS Bitsy Single Board Computer |
2 | (It is different from Bitsy(iPAQ) of Compaq) | |
3 | ||
4 | For more details, contact Applied Data Systems or see | |
5 | http://www.applieddata.net/products.html | |
6 | ||
7 | The Linux support for this product has been provided by | |
8 | Woojung Huh <whuh@applieddata.net> | |
9 | ||
10 | Use 'make adsbitsy_config' before any 'make config'. | |
11 | This will set up defaults for ADS Bitsy support. | |
12 | ||
13 | The kernel zImage is linked to be loaded and executed at 0xc0400000. | |
14 | ||
15 | Linux can be used with the ADS BootLoader that ships with the | |
16 | newer rev boards. See their documentation on how to load Linux. | |
17 | ||
18 | Supported peripherals: | |
19 | - SA1100 LCD frame buffer (8/16bpp...sort of) | |
20 | - SA1111 USB Master | |
21 | - SA1100 serial port | |
22 | - pcmcia, compact flash | |
23 | - touchscreen(ucb1200) | |
24 | - console on LCD screen | |
25 | - serial ports (ttyS[0-2]) | |
26 | - ttyS0 is default for serial console | |
27 | ||
28 | To do: | |
29 | - everything else! :-) | |
30 | ||
31 | Notes: | |
32 | ||
33 | - The flash on board is divided into 3 partitions. | |
34 | You should be careful to use flash on board. | |
a33f3224 | 35 | Its partition is different from GraphicsClient Plus and GraphicsMaster |
1da177e4 LT |
36 | |
37 | - 16bpp mode requires a different cable than what ships with the board. | |
38 | Contact ADS or look through the manual to wire your own. Currently, | |
39 | if you compile with 16bit mode support and switch into a lower bpp | |
40 | mode, the timing is off so the image is corrupted. This will be | |
41 | fixed soon. | |
42 | ||
2f82af08 | 43 | Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! |