Commit | Line | Data |
---|---|---|
98e4da8c JK |
1 | ================================================================================ |
2 | WHAT IS Flash-Friendly File System (F2FS)? | |
3 | ================================================================================ | |
4 | ||
5 | NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have | |
6 | been equipped on a variety systems ranging from mobile to server systems. Since | |
7 | they are known to have different characteristics from the conventional rotating | |
8 | disks, a file system, an upper layer to the storage device, should adapt to the | |
9 | changes from the sketch in the design level. | |
10 | ||
11 | F2FS is a file system exploiting NAND flash memory-based storage devices, which | |
12 | is based on Log-structured File System (LFS). The design has been focused on | |
13 | addressing the fundamental issues in LFS, which are snowball effect of wandering | |
14 | tree and high cleaning overhead. | |
15 | ||
16 | Since a NAND flash memory-based storage device shows different characteristic | |
17 | according to its internal geometry or flash memory management scheme, namely FTL, | |
18 | F2FS and its tools support various parameters not only for configuring on-disk | |
19 | layout, but also for selecting allocation and cleaning algorithms. | |
20 | ||
d51a7fba CL |
21 | The following git tree provides the file system formatting tool (mkfs.f2fs), |
22 | a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs). | |
5bb446a2 JK |
23 | >> git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git |
24 | ||
25 | For reporting bugs and sending patches, please use the following mailing list: | |
26 | >> linux-f2fs-devel@lists.sourceforge.net | |
98e4da8c JK |
27 | |
28 | ================================================================================ | |
29 | BACKGROUND AND DESIGN ISSUES | |
30 | ================================================================================ | |
31 | ||
32 | Log-structured File System (LFS) | |
33 | -------------------------------- | |
34 | "A log-structured file system writes all modifications to disk sequentially in | |
35 | a log-like structure, thereby speeding up both file writing and crash recovery. | |
36 | The log is the only structure on disk; it contains indexing information so that | |
37 | files can be read back from the log efficiently. In order to maintain large free | |
38 | areas on disk for fast writing, we divide the log into segments and use a | |
39 | segment cleaner to compress the live information from heavily fragmented | |
40 | segments." from Rosenblum, M. and Ousterhout, J. K., 1992, "The design and | |
41 | implementation of a log-structured file system", ACM Trans. Computer Systems | |
42 | 10, 1, 26–52. | |
43 | ||
44 | Wandering Tree Problem | |
45 | ---------------------- | |
46 | In LFS, when a file data is updated and written to the end of log, its direct | |
47 | pointer block is updated due to the changed location. Then the indirect pointer | |
48 | block is also updated due to the direct pointer block update. In this manner, | |
49 | the upper index structures such as inode, inode map, and checkpoint block are | |
50 | also updated recursively. This problem is called as wandering tree problem [1], | |
51 | and in order to enhance the performance, it should eliminate or relax the update | |
52 | propagation as much as possible. | |
53 | ||
54 | [1] Bityutskiy, A. 2005. JFFS3 design issues. http://www.linux-mtd.infradead.org/ | |
55 | ||
56 | Cleaning Overhead | |
57 | ----------------- | |
58 | Since LFS is based on out-of-place writes, it produces so many obsolete blocks | |
59 | scattered across the whole storage. In order to serve new empty log space, it | |
60 | needs to reclaim these obsolete blocks seamlessly to users. This job is called | |
61 | as a cleaning process. | |
62 | ||
63 | The process consists of three operations as follows. | |
64 | 1. A victim segment is selected through referencing segment usage table. | |
65 | 2. It loads parent index structures of all the data in the victim identified by | |
66 | segment summary blocks. | |
67 | 3. It checks the cross-reference between the data and its parent index structure. | |
68 | 4. It moves valid data selectively. | |
69 | ||
70 | This cleaning job may cause unexpected long delays, so the most important goal | |
71 | is to hide the latencies to users. And also definitely, it should reduce the | |
72 | amount of valid data to be moved, and move them quickly as well. | |
73 | ||
74 | ================================================================================ | |
75 | KEY FEATURES | |
76 | ================================================================================ | |
77 | ||
78 | Flash Awareness | |
79 | --------------- | |
80 | - Enlarge the random write area for better performance, but provide the high | |
81 | spatial locality | |
82 | - Align FS data structures to the operational units in FTL as best efforts | |
83 | ||
84 | Wandering Tree Problem | |
85 | ---------------------- | |
86 | - Use a term, “node”, that represents inodes as well as various pointer blocks | |
87 | - Introduce Node Address Table (NAT) containing the locations of all the “node” | |
88 | blocks; this will cut off the update propagation. | |
89 | ||
90 | Cleaning Overhead | |
91 | ----------------- | |
92 | - Support a background cleaning process | |
93 | - Support greedy and cost-benefit algorithms for victim selection policies | |
94 | - Support multi-head logs for static/dynamic hot and cold data separation | |
95 | - Introduce adaptive logging for efficient block allocation | |
96 | ||
97 | ================================================================================ | |
98 | MOUNT OPTIONS | |
99 | ================================================================================ | |
100 | ||
696c018c NJ |
101 | background_gc=%s Turn on/off cleaning operations, namely garbage |
102 | collection, triggered in background when I/O subsystem is | |
103 | idle. If background_gc=on, it will turn on the garbage | |
104 | collection and if background_gc=off, garbage collection | |
105 | will be truned off. | |
106 | Default value for this option is on. So garbage | |
107 | collection is on by default. | |
98e4da8c JK |
108 | disable_roll_forward Disable the roll-forward recovery routine |
109 | discard Issue discard/TRIM commands when a segment is cleaned. | |
110 | no_heap Disable heap-style segment allocation which finds free | |
111 | segments for data from the beginning of main area, while | |
112 | for node from the end of main area. | |
113 | nouser_xattr Disable Extended User Attributes. Note: xattr is enabled | |
114 | by default if CONFIG_F2FS_FS_XATTR is selected. | |
115 | noacl Disable POSIX Access Control List. Note: acl is enabled | |
116 | by default if CONFIG_F2FS_FS_POSIX_ACL is selected. | |
117 | active_logs=%u Support configuring the number of active logs. In the | |
118 | current design, f2fs supports only 2, 4, and 6 logs. | |
119 | Default number is 6. | |
120 | disable_ext_identify Disable the extension list configured by mkfs, so f2fs | |
121 | does not aware of cold files such as media files. | |
66e960c6 | 122 | inline_xattr Enable the inline xattrs feature. |
e4024e86 HL |
123 | inline_data Enable the inline data feature: New created small(<~3.4k) |
124 | files can be written into inode block. | |
98e4da8c JK |
125 | |
126 | ================================================================================ | |
127 | DEBUGFS ENTRIES | |
128 | ================================================================================ | |
129 | ||
130 | /sys/kernel/debug/f2fs/ contains information about all the partitions mounted as | |
131 | f2fs. Each file shows the whole f2fs information. | |
132 | ||
133 | /sys/kernel/debug/f2fs/status includes: | |
134 | - major file system information managed by f2fs currently | |
135 | - average SIT information about whole segments | |
136 | - current memory footprint consumed by f2fs. | |
137 | ||
b59d0bae NJ |
138 | ================================================================================ |
139 | SYSFS ENTRIES | |
140 | ================================================================================ | |
141 | ||
142 | Information about mounted f2f2 file systems can be found in | |
143 | /sys/fs/f2fs. Each mounted filesystem will have a directory in | |
144 | /sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda). | |
145 | The files in each per-device directory are shown in table below. | |
146 | ||
147 | Files in /sys/fs/f2fs/<devname> | |
148 | (see also Documentation/ABI/testing/sysfs-fs-f2fs) | |
149 | .............................................................................. | |
150 | File Content | |
151 | ||
152 | gc_max_sleep_time This tuning parameter controls the maximum sleep | |
153 | time for the garbage collection thread. Time is | |
154 | in milliseconds. | |
155 | ||
156 | gc_min_sleep_time This tuning parameter controls the minimum sleep | |
157 | time for the garbage collection thread. Time is | |
158 | in milliseconds. | |
159 | ||
160 | gc_no_gc_sleep_time This tuning parameter controls the default sleep | |
161 | time for the garbage collection thread. Time is | |
162 | in milliseconds. | |
163 | ||
d2dc095f NJ |
164 | gc_idle This parameter controls the selection of victim |
165 | policy for garbage collection. Setting gc_idle = 0 | |
166 | (default) will disable this option. Setting | |
167 | gc_idle = 1 will select the Cost Benefit approach | |
168 | & setting gc_idle = 2 will select the greedy aproach. | |
169 | ||
ea91e9b0 JK |
170 | reclaim_segments This parameter controls the number of prefree |
171 | segments to be reclaimed. If the number of prefree | |
172 | segments is larger than this number, f2fs tries to | |
173 | conduct checkpoint to reclaim the prefree segments | |
174 | to free segments. By default, 100 segments, 200MB. | |
175 | ||
ba0697ec JK |
176 | max_small_discards This parameter controls the number of discard |
177 | commands that consist small blocks less than 2MB. | |
178 | The candidates to be discarded are cached until | |
179 | checkpoint is triggered, and issued during the | |
180 | checkpoint. By default, it is disabled with 0. | |
181 | ||
216fbd64 JK |
182 | ipu_policy This parameter controls the policy of in-place |
183 | updates in f2fs. There are five policies: | |
184 | 0: F2FS_IPU_FORCE, 1: F2FS_IPU_SSR, | |
185 | 2: F2FS_IPU_UTIL, 3: F2FS_IPU_SSR_UTIL, | |
186 | 4: F2FS_IPU_DISABLE. | |
187 | ||
188 | min_ipu_util This parameter controls the threshold to trigger | |
189 | in-place-updates. The number indicates percentage | |
190 | of the filesystem utilization, and used by | |
191 | F2FS_IPU_UTIL and F2FS_IPU_SSR_UTIL policies. | |
192 | ||
3bac380c JK |
193 | max_victim_search This parameter controls the number of trials to |
194 | find a victim segment when conducting SSR and | |
195 | cleaning operations. The default value is 4096 | |
196 | which covers 8GB block address range. | |
197 | ||
98e4da8c JK |
198 | ================================================================================ |
199 | USAGE | |
200 | ================================================================================ | |
201 | ||
202 | 1. Download userland tools and compile them. | |
203 | ||
204 | 2. Skip, if f2fs was compiled statically inside kernel. | |
205 | Otherwise, insert the f2fs.ko module. | |
206 | # insmod f2fs.ko | |
207 | ||
208 | 3. Create a directory trying to mount | |
209 | # mkdir /mnt/f2fs | |
210 | ||
211 | 4. Format the block device, and then mount as f2fs | |
212 | # mkfs.f2fs -l label /dev/block_device | |
213 | # mount -t f2fs /dev/block_device /mnt/f2fs | |
214 | ||
d51a7fba CL |
215 | mkfs.f2fs |
216 | --------- | |
217 | The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem, | |
218 | which builds a basic on-disk layout. | |
219 | ||
220 | The options consist of: | |
1571f84a | 221 | -l [label] : Give a volume label, up to 512 unicode name. |
98e4da8c JK |
222 | -a [0 or 1] : Split start location of each area for heap-based allocation. |
223 | 1 is set by default, which performs this. | |
224 | -o [int] : Set overprovision ratio in percent over volume size. | |
225 | 5 is set by default. | |
226 | -s [int] : Set the number of segments per section. | |
227 | 1 is set by default. | |
228 | -z [int] : Set the number of sections per zone. | |
229 | 1 is set by default. | |
230 | -e [str] : Set basic extension list. e.g. "mp3,gif,mov" | |
1571f84a CL |
231 | -t [0 or 1] : Disable discard command or not. |
232 | 1 is set by default, which conducts discard. | |
98e4da8c | 233 | |
d51a7fba CL |
234 | fsck.f2fs |
235 | --------- | |
236 | The fsck.f2fs is a tool to check the consistency of an f2fs-formatted | |
237 | partition, which examines whether the filesystem metadata and user-made data | |
238 | are cross-referenced correctly or not. | |
239 | Note that, initial version of the tool does not fix any inconsistency. | |
240 | ||
241 | The options consist of: | |
242 | -d debug level [default:0] | |
243 | ||
244 | dump.f2fs | |
245 | --------- | |
246 | The dump.f2fs shows the information of specific inode and dumps SSA and SIT to | |
247 | file. Each file is dump_ssa and dump_sit. | |
248 | ||
249 | The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem. | |
250 | It shows on-disk inode information reconized by a given inode number, and is | |
251 | able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and | |
252 | ./dump_sit respectively. | |
253 | ||
254 | The options consist of: | |
255 | -d debug level [default:0] | |
256 | -i inode no (hex) | |
257 | -s [SIT dump segno from #1~#2 (decimal), for all 0~-1] | |
258 | -a [SSA dump segno from #1~#2 (decimal), for all 0~-1] | |
259 | ||
260 | Examples: | |
261 | # dump.f2fs -i [ino] /dev/sdx | |
262 | # dump.f2fs -s 0~-1 /dev/sdx (SIT dump) | |
263 | # dump.f2fs -a 0~-1 /dev/sdx (SSA dump) | |
264 | ||
98e4da8c JK |
265 | ================================================================================ |
266 | DESIGN | |
267 | ================================================================================ | |
268 | ||
269 | On-disk Layout | |
270 | -------------- | |
271 | ||
272 | F2FS divides the whole volume into a number of segments, each of which is fixed | |
273 | to 2MB in size. A section is composed of consecutive segments, and a zone | |
274 | consists of a set of sections. By default, section and zone sizes are set to one | |
275 | segment size identically, but users can easily modify the sizes by mkfs. | |
276 | ||
277 | F2FS splits the entire volume into six areas, and all the areas except superblock | |
278 | consists of multiple segments as described below. | |
279 | ||
280 | align with the zone size <-| | |
281 | |-> align with the segment size | |
282 | _________________________________________________________________________ | |
9268cc35 HL |
283 | | | | Segment | Node | Segment | | |
284 | | Superblock | Checkpoint | Info. | Address | Summary | Main | | |
285 | | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | | |
98e4da8c JK |
286 | |____________|_____2______|______N______|______N______|______N_____|__N___| |
287 | . . | |
288 | . . | |
289 | . . | |
290 | ._________________________________________. | |
291 | |_Segment_|_..._|_Segment_|_..._|_Segment_| | |
292 | . . | |
293 | ._________._________ | |
294 | |_section_|__...__|_ | |
295 | . . | |
296 | .________. | |
297 | |__zone__| | |
298 | ||
299 | - Superblock (SB) | |
300 | : It is located at the beginning of the partition, and there exist two copies | |
301 | to avoid file system crash. It contains basic partition information and some | |
302 | default parameters of f2fs. | |
303 | ||
304 | - Checkpoint (CP) | |
305 | : It contains file system information, bitmaps for valid NAT/SIT sets, orphan | |
306 | inode lists, and summary entries of current active segments. | |
307 | ||
98e4da8c JK |
308 | - Segment Information Table (SIT) |
309 | : It contains segment information such as valid block count and bitmap for the | |
310 | validity of all the blocks. | |
311 | ||
9268cc35 HL |
312 | - Node Address Table (NAT) |
313 | : It is composed of a block address table for all the node blocks stored in | |
314 | Main area. | |
315 | ||
98e4da8c JK |
316 | - Segment Summary Area (SSA) |
317 | : It contains summary entries which contains the owner information of all the | |
318 | data and node blocks stored in Main area. | |
319 | ||
320 | - Main Area | |
321 | : It contains file and directory data including their indices. | |
322 | ||
323 | In order to avoid misalignment between file system and flash-based storage, F2FS | |
324 | aligns the start block address of CP with the segment size. Also, it aligns the | |
325 | start block address of Main area with the zone size by reserving some segments | |
326 | in SSA area. | |
327 | ||
328 | Reference the following survey for additional technical details. | |
329 | https://wiki.linaro.org/WorkingGroups/Kernel/Projects/FlashCardSurvey | |
330 | ||
331 | File System Metadata Structure | |
332 | ------------------------------ | |
333 | ||
334 | F2FS adopts the checkpointing scheme to maintain file system consistency. At | |
335 | mount time, F2FS first tries to find the last valid checkpoint data by scanning | |
336 | CP area. In order to reduce the scanning time, F2FS uses only two copies of CP. | |
337 | One of them always indicates the last valid data, which is called as shadow copy | |
338 | mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism. | |
339 | ||
340 | For file system consistency, each CP points to which NAT and SIT copies are | |
341 | valid, as shown as below. | |
342 | ||
343 | +--------+----------+---------+ | |
9268cc35 | 344 | | CP | SIT | NAT | |
98e4da8c JK |
345 | +--------+----------+---------+ |
346 | . . . . | |
347 | . . . . | |
348 | . . . . | |
349 | +-------+-------+--------+--------+--------+--------+ | |
9268cc35 | 350 | | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | |
98e4da8c JK |
351 | +-------+-------+--------+--------+--------+--------+ |
352 | | ^ ^ | |
353 | | | | | |
354 | `----------------------------------------' | |
355 | ||
356 | Index Structure | |
357 | --------------- | |
358 | ||
359 | The key data structure to manage the data locations is a "node". Similar to | |
360 | traditional file structures, F2FS has three types of node: inode, direct node, | |
d08ab08d | 361 | indirect node. F2FS assigns 4KB to an inode block which contains 923 data block |
98e4da8c JK |
362 | indices, two direct node pointers, two indirect node pointers, and one double |
363 | indirect node pointer as described below. One direct node block contains 1018 | |
364 | data blocks, and one indirect node block contains also 1018 node blocks. Thus, | |
365 | one inode block (i.e., a file) covers: | |
366 | ||
367 | 4KB * (923 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB. | |
368 | ||
369 | Inode block (4KB) | |
370 | |- data (923) | |
371 | |- direct node (2) | |
372 | | `- data (1018) | |
373 | |- indirect node (2) | |
374 | | `- direct node (1018) | |
375 | | `- data (1018) | |
376 | `- double indirect node (1) | |
377 | `- indirect node (1018) | |
378 | `- direct node (1018) | |
379 | `- data (1018) | |
380 | ||
381 | Note that, all the node blocks are mapped by NAT which means the location of | |
382 | each node is translated by the NAT table. In the consideration of the wandering | |
383 | tree problem, F2FS is able to cut off the propagation of node updates caused by | |
384 | leaf data writes. | |
385 | ||
386 | Directory Structure | |
387 | ------------------- | |
388 | ||
389 | A directory entry occupies 11 bytes, which consists of the following attributes. | |
390 | ||
391 | - hash hash value of the file name | |
392 | - ino inode number | |
393 | - len the length of file name | |
394 | - type file type such as directory, symlink, etc | |
395 | ||
396 | A dentry block consists of 214 dentry slots and file names. Therein a bitmap is | |
397 | used to represent whether each dentry is valid or not. A dentry block occupies | |
398 | 4KB with the following composition. | |
399 | ||
400 | Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) + | |
401 | dentries(11 * 214 bytes) + file name (8 * 214 bytes) | |
402 | ||
403 | [Bucket] | |
404 | +--------------------------------+ | |
405 | |dentry block 1 | dentry block 2 | | |
406 | +--------------------------------+ | |
407 | . . | |
408 | . . | |
409 | . [Dentry Block Structure: 4KB] . | |
410 | +--------+----------+----------+------------+ | |
411 | | bitmap | reserved | dentries | file names | | |
412 | +--------+----------+----------+------------+ | |
413 | [Dentry Block: 4KB] . . | |
414 | . . | |
415 | . . | |
416 | +------+------+-----+------+ | |
417 | | hash | ino | len | type | | |
418 | +------+------+-----+------+ | |
419 | [Dentry Structure: 11 bytes] | |
420 | ||
421 | F2FS implements multi-level hash tables for directory structure. Each level has | |
422 | a hash table with dedicated number of hash buckets as shown below. Note that | |
423 | "A(2B)" means a bucket includes 2 data blocks. | |
424 | ||
425 | ---------------------- | |
426 | A : bucket | |
427 | B : block | |
428 | N : MAX_DIR_HASH_DEPTH | |
429 | ---------------------- | |
430 | ||
431 | level #0 | A(2B) | |
432 | | | |
433 | level #1 | A(2B) - A(2B) | |
434 | | | |
435 | level #2 | A(2B) - A(2B) - A(2B) - A(2B) | |
436 | . | . . . . | |
437 | level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) | |
438 | . | . . . . | |
439 | level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) | |
440 | ||
441 | The number of blocks and buckets are determined by, | |
442 | ||
443 | ,- 2, if n < MAX_DIR_HASH_DEPTH / 2, | |
444 | # of blocks in level #n = | | |
445 | `- 4, Otherwise | |
446 | ||
447 | ,- 2^n, if n < MAX_DIR_HASH_DEPTH / 2, | |
448 | # of buckets in level #n = | | |
449 | `- 2^((MAX_DIR_HASH_DEPTH / 2) - 1), Otherwise | |
450 | ||
451 | When F2FS finds a file name in a directory, at first a hash value of the file | |
452 | name is calculated. Then, F2FS scans the hash table in level #0 to find the | |
453 | dentry consisting of the file name and its inode number. If not found, F2FS | |
454 | scans the next hash table in level #1. In this way, F2FS scans hash tables in | |
455 | each levels incrementally from 1 to N. In each levels F2FS needs to scan only | |
456 | one bucket determined by the following equation, which shows O(log(# of files)) | |
457 | complexity. | |
458 | ||
459 | bucket number to scan in level #n = (hash value) % (# of buckets in level #n) | |
460 | ||
461 | In the case of file creation, F2FS finds empty consecutive slots that cover the | |
462 | file name. F2FS searches the empty slots in the hash tables of whole levels from | |
463 | 1 to N in the same way as the lookup operation. | |
464 | ||
465 | The following figure shows an example of two cases holding children. | |
466 | --------------> Dir <-------------- | |
467 | | | | |
468 | child child | |
469 | ||
470 | child - child [hole] - child | |
471 | ||
472 | child - child - child [hole] - [hole] - child | |
473 | ||
474 | Case 1: Case 2: | |
475 | Number of children = 6, Number of children = 3, | |
476 | File size = 7 File size = 7 | |
477 | ||
478 | Default Block Allocation | |
479 | ------------------------ | |
480 | ||
481 | At runtime, F2FS manages six active logs inside "Main" area: Hot/Warm/Cold node | |
482 | and Hot/Warm/Cold data. | |
483 | ||
484 | - Hot node contains direct node blocks of directories. | |
485 | - Warm node contains direct node blocks except hot node blocks. | |
486 | - Cold node contains indirect node blocks | |
487 | - Hot data contains dentry blocks | |
488 | - Warm data contains data blocks except hot and cold data blocks | |
489 | - Cold data contains multimedia data or migrated data blocks | |
490 | ||
491 | LFS has two schemes for free space management: threaded log and copy-and-compac- | |
492 | tion. The copy-and-compaction scheme which is known as cleaning, is well-suited | |
493 | for devices showing very good sequential write performance, since free segments | |
494 | are served all the time for writing new data. However, it suffers from cleaning | |
495 | overhead under high utilization. Contrarily, the threaded log scheme suffers | |
496 | from random writes, but no cleaning process is needed. F2FS adopts a hybrid | |
497 | scheme where the copy-and-compaction scheme is adopted by default, but the | |
498 | policy is dynamically changed to the threaded log scheme according to the file | |
499 | system status. | |
500 | ||
501 | In order to align F2FS with underlying flash-based storage, F2FS allocates a | |
502 | segment in a unit of section. F2FS expects that the section size would be the | |
503 | same as the unit size of garbage collection in FTL. Furthermore, with respect | |
504 | to the mapping granularity in FTL, F2FS allocates each section of the active | |
505 | logs from different zones as much as possible, since FTL can write the data in | |
506 | the active logs into one allocation unit according to its mapping granularity. | |
507 | ||
508 | Cleaning process | |
509 | ---------------- | |
510 | ||
511 | F2FS does cleaning both on demand and in the background. On-demand cleaning is | |
512 | triggered when there are not enough free segments to serve VFS calls. Background | |
513 | cleaner is operated by a kernel thread, and triggers the cleaning job when the | |
514 | system is idle. | |
515 | ||
516 | F2FS supports two victim selection policies: greedy and cost-benefit algorithms. | |
517 | In the greedy algorithm, F2FS selects a victim segment having the smallest number | |
518 | of valid blocks. In the cost-benefit algorithm, F2FS selects a victim segment | |
519 | according to the segment age and the number of valid blocks in order to address | |
520 | log block thrashing problem in the greedy algorithm. F2FS adopts the greedy | |
521 | algorithm for on-demand cleaner, while background cleaner adopts cost-benefit | |
522 | algorithm. | |
523 | ||
524 | In order to identify whether the data in the victim segment are valid or not, | |
525 | F2FS manages a bitmap. Each bit represents the validity of a block, and the | |
526 | bitmap is composed of a bit stream covering whole blocks in main area. |