Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | |
2 | Fax with isdn4linux | |
3 | =================== | |
4 | ||
5 | When enabled during kernel configuration, the tty emulator | |
6 | of the ISDN subsystem is capable of the Fax Class 2 commands. | |
7 | ||
8 | This only makes sense under the following conditions : | |
9 | ||
10 | - You need the commands as dummy, because you are using | |
11 | hylafax (with patch) for AVM capi. | |
12 | - You want to use the fax capabilities of your isdn-card. | |
13 | (supported cards are listed below) | |
14 | ||
15 | ||
16 | NOTE: This implementation does *not* support fax with passive | |
17 | ISDN-cards (known as softfax). The low-level driver of | |
18 | the ISDN-card and/or the card itself must support this. | |
19 | ||
20 | ||
21 | Supported ISDN-Cards | |
22 | -------------------- | |
23 | ||
24 | Eicon DIVA Server BRI/PCI | |
25 | - full support with both B-channels. | |
26 | ||
27 | Eicon DIVA Server 4BRI/PCI | |
28 | - full support with all B-channels. | |
29 | ||
30 | Eicon DIVA Server PRI/PCI | |
31 | - full support on amount of B-channels | |
32 | depending on DSPs on board. | |
33 | ||
34 | ||
35 | ||
36 | The command set is known as Class 2 (not Class 2.0) and | |
37 | can be activated by AT+FCLASS=2 | |
38 | ||
39 | ||
40 | The interface between the link-level-module and the hardware-level driver | |
41 | is described in the files INTERFACE.fax and INTERFACE. | |
42 | ||
43 | Armin | |
44 | mac@melware.de | |
45 |