Commit | Line | Data |
---|---|---|
0ee9d71f | 1 | Kernel Parameters |
1da177e4 LT |
2 | ~~~~~~~~~~~~~~~~~ |
3 | ||
4 | The following is a consolidated list of the kernel parameters as implemented | |
5 | (mostly) by the __setup() macro and sorted into English Dictionary order | |
6 | (defined as ignoring all punctuation and sorting digits before letters in a | |
7 | case insensitive manner), and with descriptions where known. | |
8 | ||
9 | Module parameters for loadable modules are specified only as the | |
10 | parameter name with optional '=' and value as appropriate, such as: | |
11 | ||
12 | modprobe usbcore blinkenlights=1 | |
13 | ||
14 | Module parameters for modules that are built into the kernel image | |
15 | are specified on the kernel command line with the module name plus | |
16 | '.' plus parameter name, with '=' and value if appropriate, such as: | |
17 | ||
18 | usbcore.blinkenlights=1 | |
19 | ||
a901ebb9 SR |
20 | This document may not be entirely up to date and comprehensive. The command |
21 | "modinfo -p ${modulename}" shows a current list of all parameters of a loadable | |
22 | module. Loadable modules, after being loaded into the running kernel, also | |
23 | reveal their parameters in /sys/module/${modulename}/parameters/. Some of these | |
24 | parameters may be changed at runtime by the command | |
25 | "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". | |
26 | ||
a9913044 | 27 | The text in square brackets at the beginning of the description states the |
1da177e4 LT |
28 | restrictions on the kernel for the said kernel parameter to be valid. The |
29 | restrictions referred to are that the relevant option is valid if: | |
30 | ||
31 | ACPI ACPI support is enabled. | |
32 | ALSA ALSA sound support is enabled. | |
33 | APIC APIC support is enabled. | |
34 | APM Advanced Power Management support is enabled. | |
35 | AX25 Appropriate AX.25 support is enabled. | |
36 | CD Appropriate CD support is enabled. | |
a9913044 RD |
37 | DEVFS devfs support is enabled. |
38 | DRM Direct Rendering Management support is enabled. | |
1da177e4 LT |
39 | EDD BIOS Enhanced Disk Drive Services (EDD) is enabled |
40 | EFI EFI Partitioning (GPT) is enabled | |
41 | EIDE EIDE/ATAPI support is enabled. | |
42 | FB The frame buffer device is enabled. | |
43 | HW Appropriate hardware is enabled. | |
44 | IA-32 IA-32 aka i386 architecture is enabled. | |
45 | IA-64 IA-64 architecture is enabled. | |
46 | IOSCHED More than one I/O scheduler is enabled. | |
41e2e8be | 47 | IP_PNP IP DHCP, BOOTP, or RARP is enabled. |
1da177e4 LT |
48 | ISAPNP ISA PnP code is enabled. |
49 | ISDN Appropriate ISDN support is enabled. | |
50 | JOY Appropriate joystick support is enabled. | |
51 | LP Printer support is enabled. | |
52 | LOOP Loopback device support is enabled. | |
53 | M68k M68k architecture is enabled. | |
54 | These options have more detailed description inside of | |
55 | Documentation/m68k/kernel-options.txt. | |
56 | MCA MCA bus support is enabled. | |
57 | MDA MDA console support is enabled. | |
58 | MOUSE Appropriate mouse support is enabled. | |
309e57df | 59 | MSI Message Signaled Interrupts (PCI). |
1da177e4 LT |
60 | MTD MTD support is enabled. |
61 | NET Appropriate network support is enabled. | |
62 | NUMA NUMA support is enabled. | |
63 | NFS Appropriate NFS support is enabled. | |
64 | OSS OSS sound support is enabled. | |
65 | PARIDE The ParIDE subsystem is enabled. | |
66 | PARISC The PA-RISC architecture is enabled. | |
67 | PCI PCI bus support is enabled. | |
68 | PCMCIA The PCMCIA subsystem is enabled. | |
69 | PNP Plug & Play support is enabled. | |
70 | PPC PowerPC architecture is enabled. | |
71 | PPT Parallel port support is enabled. | |
72 | PS2 Appropriate PS/2 support is enabled. | |
73 | RAM RAM disk support is enabled. | |
74 | S390 S390 architecture is enabled. | |
75 | SCSI Appropriate SCSI support is enabled. | |
76 | A lot of drivers has their options described inside of | |
77 | Documentation/scsi/. | |
78 | SELINUX SELinux support is enabled. | |
79 | SERIAL Serial support is enabled. | |
80 | SMP The kernel is an SMP kernel. | |
81 | SPARC Sparc architecture is enabled. | |
a9913044 | 82 | SWSUSP Software suspend is enabled. |
1da177e4 LT |
83 | TS Appropriate touchscreen support is enabled. |
84 | USB USB support is enabled. | |
85 | USBHID USB Human Interface Device support is enabled. | |
86 | V4L Video For Linux support is enabled. | |
87 | VGA The VGA console has been enabled. | |
88 | VT Virtual terminal support is enabled. | |
89 | WDT Watchdog support is enabled. | |
90 | XT IBM PC/XT MFM hard disk support is enabled. | |
91 | X86-64 X86-64 architecture is enabled. | |
92 | More X86-64 boot options can be found in | |
93 | Documentation/x86_64/boot-options.txt . | |
94 | ||
95 | In addition, the following text indicates that the option: | |
96 | ||
97 | BUGS= Relates to possible processor bugs on the said processor. | |
98 | KNL Is a kernel start-up parameter. | |
99 | BOOT Is a boot loader parameter. | |
100 | ||
101 | Parameters denoted with BOOT are actually interpreted by the boot | |
102 | loader, and have no meaning to the kernel directly. | |
103 | Do not modify the syntax of boot loader parameters without extreme | |
104 | need or coordination with <Documentation/i386/boot.txt>. | |
105 | ||
106 | Note that ALL kernel parameters listed below are CASE SENSITIVE, and that | |
107 | a trailing = on the name of any parameter states that that parameter will | |
108 | be entered as an environment variable, whereas its absence indicates that | |
109 | it will appear as a kernel argument readable via /proc/cmdline by programs | |
110 | running once the system is up. | |
111 | ||
112 | 53c7xx= [HW,SCSI] Amiga SCSI controllers | |
113 | See header of drivers/scsi/53c7xx.c. | |
114 | See also Documentation/scsi/ncr53c7xx.txt. | |
115 | ||
a9913044 RD |
116 | acpi= [HW,ACPI] Advanced Configuration and Power Interface |
117 | Format: { force | off | ht | strict | noirq } | |
1da177e4 LT |
118 | force -- enable ACPI if default was off |
119 | off -- disable ACPI if default was on | |
120 | noirq -- do not use ACPI for IRQ routing | |
121 | ht -- run only enough ACPI to enable Hyper Threading | |
a9913044 | 122 | strict -- Be less tolerant of platforms that are not |
1da177e4 LT |
123 | strictly ACPI specification compliant. |
124 | ||
125 | See also Documentation/pm.txt, pci=noacpi | |
126 | ||
127 | acpi_sleep= [HW,ACPI] Sleep options | |
128 | Format: { s3_bios, s3_mode } | |
129 | See Documentation/power/video.txt | |
a9913044 | 130 | |
1da177e4 | 131 | acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode |
a9913044 | 132 | Format: { level | edge | high | low } |
1da177e4 | 133 | |
a9913044 RD |
134 | acpi_irq_balance [HW,ACPI] |
135 | ACPI will balance active IRQs | |
136 | default in APIC mode | |
1da177e4 | 137 | |
a9913044 RD |
138 | acpi_irq_nobalance [HW,ACPI] |
139 | ACPI will not move active IRQs (default) | |
140 | default in PIC mode | |
1da177e4 | 141 | |
a9913044 RD |
142 | acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for |
143 | use by PCI | |
1da177e4 LT |
144 | Format: <irq>,<irq>... |
145 | ||
a9913044 | 146 | acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA |
1da177e4 LT |
147 | Format: <irq>,<irq>... |
148 | ||
149 | acpi_osi= [HW,ACPI] empty param disables _OSI | |
150 | ||
151 | acpi_serialize [HW,ACPI] force serialization of AML methods | |
152 | ||
153 | acpi_skip_timer_override [HW,ACPI] | |
154 | Recognize and ignore IRQ0/pin2 Interrupt Override. | |
155 | For broken nForce2 BIOS resulting in XT-PIC timer. | |
156 | ||
157 | acpi_dbg_layer= [HW,ACPI] | |
158 | Format: <int> | |
a9913044 | 159 | Each bit of the <int> indicates an ACPI debug layer, |
1da177e4 LT |
160 | 1: enable, 0: disable. It is useful for boot time |
161 | debugging. After system has booted up, it can be set | |
162 | via /proc/acpi/debug_layer. | |
163 | ||
164 | acpi_dbg_level= [HW,ACPI] | |
165 | Format: <int> | |
a9913044 | 166 | Each bit of the <int> indicates an ACPI debug level, |
1da177e4 LT |
167 | 1: enable, 0: disable. It is useful for boot time |
168 | debugging. After system has booted up, it can be set | |
169 | via /proc/acpi/debug_level. | |
170 | ||
171 | acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT | |
172 | ||
30e332f3 LY |
173 | acpi_generic_hotkey [HW,ACPI] |
174 | Allow consolidated generic hotkey driver to | |
a9913044 | 175 | override platform specific driver. |
30e332f3 LY |
176 | See also Documentation/acpi-hotkey.txt. |
177 | ||
66759a01 CE |
178 | enable_timer_pin_1 [i386,x86-64] |
179 | Enable PIN 1 of APIC timer | |
a9913044 RD |
180 | Can be useful to work around chipset bugs |
181 | (in particular on some ATI chipsets). | |
66759a01 CE |
182 | The kernel tries to set a reasonable default. |
183 | ||
184 | disable_timer_pin_1 [i386,x86-64] | |
185 | Disable PIN 1 of APIC timer | |
186 | Can be useful to work around chipset bugs. | |
187 | ||
1da177e4 LT |
188 | ad1816= [HW,OSS] |
189 | Format: <io>,<irq>,<dma>,<dma2> | |
190 | See also Documentation/sound/oss/AD1816. | |
191 | ||
192 | ad1848= [HW,OSS] | |
193 | Format: <io>,<irq>,<dma>,<dma2>,<type> | |
194 | ||
195 | adlib= [HW,OSS] | |
196 | Format: <io> | |
a9913044 | 197 | |
1da177e4 LT |
198 | advansys= [HW,SCSI] |
199 | See header of drivers/scsi/advansys.c. | |
200 | ||
201 | advwdt= [HW,WDT] Advantech WDT | |
202 | Format: <iostart>,<iostop> | |
203 | ||
204 | aedsp16= [HW,OSS] Audio Excel DSP 16 | |
205 | Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> | |
206 | See also header of sound/oss/aedsp16.c. | |
a9913044 | 207 | |
1da177e4 LT |
208 | aha152x= [HW,SCSI] |
209 | See Documentation/scsi/aha152x.txt. | |
210 | ||
211 | aha1542= [HW,SCSI] | |
212 | Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]] | |
213 | ||
214 | aic7xxx= [HW,SCSI] | |
215 | See Documentation/scsi/aic7xxx.txt. | |
216 | ||
217 | aic79xx= [HW,SCSI] | |
218 | See Documentation/scsi/aic79xx.txt. | |
219 | ||
1da177e4 LT |
220 | amijoy.map= [HW,JOY] Amiga joystick support |
221 | Map of devices attached to JOY0DAT and JOY1DAT | |
222 | Format: <a>,<b> | |
223 | See also Documentation/kernel/input/joystick.txt | |
224 | ||
225 | analog.map= [HW,JOY] Analog joystick and gamepad support | |
226 | Specifies type or capabilities of an analog joystick | |
227 | connected to one of 16 gameports | |
228 | Format: <type1>,<type2>,..<type16> | |
229 | ||
a9913044 RD |
230 | apc= [HW,SPARC] |
231 | Power management functions (SPARCstation-4/5 + deriv.) | |
1da177e4 LT |
232 | Format: noidle |
233 | Disable APC CPU standby support. SPARCstation-Fox does | |
234 | not play well with APC CPU idle - disable it if you have | |
235 | APC and your system crashes randomly. | |
236 | ||
a9913044 | 237 | apic= [APIC,i386] Change the output verbosity whilst booting |
1da177e4 LT |
238 | Format: { quiet (default) | verbose | debug } |
239 | Change the amount of debugging information output | |
240 | when initialising the APIC and IO-APIC components. | |
a9913044 | 241 | |
1da177e4 LT |
242 | apm= [APM] Advanced Power Management |
243 | See header of arch/i386/kernel/apm.c. | |
244 | ||
245 | applicom= [HW] | |
246 | Format: <mem>,<irq> | |
a9913044 | 247 | |
1da177e4 LT |
248 | arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards |
249 | Format: <io>,<irq>,<nodeID> | |
250 | ||
251 | ataflop= [HW,M68k] | |
252 | ||
253 | atarimouse= [HW,MOUSE] Atari Mouse | |
254 | ||
255 | atascsi= [HW,SCSI] Atari SCSI | |
256 | ||
257 | atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess, | |
258 | EzKey and similar keyboards | |
259 | ||
260 | atkbd.reset= [HW] Reset keyboard during initialization | |
261 | ||
a9913044 RD |
262 | atkbd.set= [HW] Select keyboard code set |
263 | Format: <int> (2 = AT (default), 3 = PS/2) | |
1da177e4 LT |
264 | |
265 | atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar | |
266 | keyboards | |
267 | ||
268 | atkbd.softraw= [HW] Choose between synthetic and real raw mode | |
269 | Format: <bool> (0 = real, 1 = synthetic (default)) | |
a9913044 RD |
270 | |
271 | atkbd.softrepeat= [HW] | |
272 | Use software keyboard repeat | |
1da177e4 LT |
273 | |
274 | autotest [IA64] | |
275 | ||
276 | awe= [HW,OSS] AWE32/SB32/AWE64 wave table synth | |
277 | Format: <io>,<memsize>,<isapnp> | |
a9913044 | 278 | |
1da177e4 LT |
279 | aztcd= [HW,CD] Aztech CD268 CDROM driver |
280 | Format: <io>,0x79 (?) | |
281 | ||
282 | baycom_epp= [HW,AX25] | |
283 | Format: <io>,<mode> | |
a9913044 | 284 | |
1da177e4 LT |
285 | baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem |
286 | Format: <io>,<mode> | |
287 | See header of drivers/net/hamradio/baycom_par.c. | |
288 | ||
a9913044 RD |
289 | baycom_ser_fdx= [HW,AX25] |
290 | BayCom Serial Port AX.25 Modem (Full Duplex Mode) | |
1da177e4 LT |
291 | Format: <io>,<irq>,<mode>[,<baud>] |
292 | See header of drivers/net/hamradio/baycom_ser_fdx.c. | |
293 | ||
a9913044 RD |
294 | baycom_ser_hdx= [HW,AX25] |
295 | BayCom Serial Port AX.25 Modem (Half Duplex Mode) | |
1da177e4 LT |
296 | Format: <io>,<irq>,<mode> |
297 | See header of drivers/net/hamradio/baycom_ser_hdx.c. | |
298 | ||
299 | blkmtd_device= [HW,MTD] | |
300 | blkmtd_erasesz= | |
301 | blkmtd_ro= | |
302 | blkmtd_bs= | |
303 | blkmtd_count= | |
304 | ||
305 | bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) | |
a9913044 RD |
306 | bttv.radio= Most important insmod options are available as |
307 | kernel args too. | |
1da177e4 LT |
308 | bttv.pll= See Documentation/video4linux/bttv/Insmod-options |
309 | bttv.tuner= and Documentation/video4linux/bttv/CARDLIST | |
310 | ||
311 | BusLogic= [HW,SCSI] | |
312 | See drivers/scsi/BusLogic.c, comment before function | |
313 | BusLogic_ParseDriverOptions(). | |
314 | ||
315 | c101= [NET] Moxa C101 synchronous serial card | |
316 | ||
317 | cachesize= [BUGS=IA-32] Override level 2 CPU cache size detection. | |
318 | Sometimes CPU hardware bugs make them report the cache | |
319 | size incorrectly. The kernel will attempt work arounds | |
320 | to fix known problems, but for some CPUs it is not | |
321 | possible to determine what the correct size should be. | |
322 | This option provides an override for these situations. | |
323 | ||
324 | cdu31a= [HW,CD] | |
325 | Format: <io>,<irq>[,PAS] | |
326 | See header of drivers/cdrom/cdu31a.c. | |
327 | ||
328 | chandev= [HW,NET] Generic channel device initialisation | |
329 | ||
330 | checkreqprot [SELINUX] Set initial checkreqprot flag value. | |
331 | Format: { "0" | "1" } | |
332 | See security/selinux/Kconfig help text. | |
a9913044 RD |
333 | 0 -- check protection applied by kernel (includes |
334 | any implied execute protection). | |
1da177e4 LT |
335 | 1 -- check protection requested by application. |
336 | Default value is set via a kernel config option. | |
a9913044 RD |
337 | Value can be changed at runtime via |
338 | /selinux/checkreqprot. | |
339 | ||
340 | clock= [BUGS=IA-32,HW] gettimeofday timesource override. | |
1da177e4 | 341 | Forces specified timesource (if avaliable) to be used |
a9913044 RD |
342 | when calculating gettimeofday(). If specicified |
343 | timesource is not avalible, it defaults to PIT. | |
1da177e4 LT |
344 | Format: { pit | tsc | cyclone | pmtmr } |
345 | ||
f9262c12 AK |
346 | disable_8254_timer |
347 | enable_8254_timer | |
348 | [IA32/X86_64] Disable/Enable interrupt 0 timer routing | |
349 | over the 8254 in addition to over the IO-APIC. The | |
350 | kernel tries to set a sensible default. | |
351 | ||
1da177e4 LT |
352 | hpet= [IA-32,HPET] option to disable HPET and use PIT. |
353 | Format: disable | |
354 | ||
355 | cm206= [HW,CD] | |
356 | Format: { auto | [<io>,][<irq>] } | |
357 | ||
358 | com20020= [HW,NET] ARCnet - COM20020 chipset | |
a9913044 RD |
359 | Format: |
360 | <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]] | |
1da177e4 LT |
361 | |
362 | com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers) | |
363 | Format: <io>[,<irq>] | |
364 | ||
a9913044 RD |
365 | com90xx= [HW,NET] |
366 | ARCnet - COM90xx chipset (memory-mapped buffers) | |
1da177e4 LT |
367 | Format: <io>[,<irq>[,<memstart>]] |
368 | ||
369 | condev= [HW,S390] console device | |
370 | conmode= | |
a9913044 | 371 | |
1da177e4 LT |
372 | console= [KNL] Output console device and options. |
373 | ||
374 | tty<n> Use the virtual console device <n>. | |
375 | ||
376 | ttyS<n>[,options] | |
f1a1c2dc | 377 | ttyUSB0[,options] |
1da177e4 | 378 | Use the specified serial port. The options are of |
f1a1c2dc RD |
379 | the form "bbbbpnf", where "bbbb" is the baud rate, |
380 | "p" is parity ("n", "o", or "e"), "n" is number of | |
381 | bits, and "f" is flow control ("r" for RTS or | |
382 | omit it). Default is "9600n8". | |
383 | ||
384 | See Documentation/serial-console.txt for more | |
385 | information. See | |
386 | Documentation/networking/netconsole.txt for an | |
387 | alternative. | |
1da177e4 LT |
388 | |
389 | uart,io,<addr>[,options] | |
390 | uart,mmio,<addr>[,options] | |
391 | Start an early, polled-mode console on the 8250/16550 | |
392 | UART at the specified I/O port or MMIO address, | |
393 | switching to the matching ttyS device later. The | |
394 | options are the same as for ttyS, above. | |
395 | ||
396 | cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver | |
a9913044 RD |
397 | Format: |
398 | <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>] | |
1da177e4 LT |
399 | |
400 | cpia_pp= [HW,PPT] | |
401 | Format: { parport<nr> | auto | none } | |
402 | ||
dc009d92 EB |
403 | crashkernel=nn[KMG]@ss[KMG] |
404 | [KNL] Reserve a chunk of physical memory to | |
405 | hold a kernel to switch to with kexec on panic. | |
406 | ||
1da177e4 LT |
407 | cs4232= [HW,OSS] |
408 | Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq> | |
409 | ||
410 | cs89x0_dma= [HW,NET] | |
411 | Format: <dma> | |
412 | ||
413 | cs89x0_media= [HW,NET] | |
414 | Format: { rj45 | aui | bnc } | |
a9913044 | 415 | |
1da177e4 | 416 | cyclades= [HW,SERIAL] Cyclades multi-serial port adapter. |
a9913044 RD |
417 | |
418 | dasd= [HW,NET] | |
1da177e4 LT |
419 | See header of drivers/s390/block/dasd_devmap.c. |
420 | ||
421 | db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port | |
422 | (one device per port) | |
423 | Format: <port#>,<type> | |
424 | See also Documentation/input/joystick-parport.txt | |
425 | ||
426 | debug [KNL] Enable kernel debugging (events log level). | |
427 | ||
428 | decnet= [HW,NET] | |
429 | Format: <area>[,<node>] | |
430 | See also Documentation/networking/decnet.txt. | |
431 | ||
432 | devfs= [DEVFS] | |
433 | See Documentation/filesystems/devfs/boot-options. | |
434 | ||
435 | dhash_entries= [KNL] | |
436 | Set number of hash buckets for dentry cache. | |
a9913044 | 437 | |
1da177e4 LT |
438 | digi= [HW,SERIAL] |
439 | IO parameters + enable/disable command. | |
440 | ||
441 | digiepca= [HW,SERIAL] | |
442 | See drivers/char/README.epca and | |
443 | Documentation/digiepca.txt. | |
444 | ||
445 | dmascc= [HW,AX25,SERIAL] AX.25 Z80SCC driver with DMA | |
446 | support available. | |
447 | Format: <io_dev0>[,<io_dev1>[,..<io_dev32>]] | |
448 | ||
449 | dmasound= [HW,OSS] Sound subsystem buffers | |
450 | ||
451 | dscc4.setup= [NET] | |
452 | ||
453 | dtc3181e= [HW,SCSI] | |
454 | ||
a9913044 | 455 | earlyprintk= [IA-32,X86-64] |
1da177e4 LT |
456 | earlyprintk=vga |
457 | earlyprintk=serial[,ttySn[,baudrate]] | |
458 | ||
a9913044 | 459 | Append ",keep" to not disable it when the real console |
1da177e4 LT |
460 | takes over. |
461 | ||
462 | Only vga or serial at a time, not both. | |
463 | ||
464 | Currently only ttyS0 and ttyS1 are supported. | |
465 | ||
466 | Interaction with the standard serial driver is not | |
467 | very good. | |
468 | ||
469 | The VGA output is eventually overwritten by the real | |
470 | console. | |
471 | ||
472 | eata= [HW,SCSI] | |
473 | ||
53f11d4f LB |
474 | ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode |
475 | Format: <int> | |
476 | 0: polling mode | |
477 | non-0: interrupt mode (default) | |
478 | ||
1da177e4 LT |
479 | eda= [HW,PS2] |
480 | ||
481 | edb= [HW,PS2] | |
482 | ||
483 | edd= [EDD] | |
484 | Format: {"of[f]" | "sk[ipmbr]"} | |
485 | See comment in arch/i386/boot/edd.S | |
486 | ||
a9913044 | 487 | eicon= [HW,ISDN] |
1da177e4 LT |
488 | Format: <id>,<membase>,<irq> |
489 | ||
490 | eisa_irq_edge= [PARISC,HW] | |
491 | See header of drivers/parisc/eisa.c. | |
492 | ||
493 | elanfreq= [IA-32] | |
494 | See comment before function elanfreq_setup() in | |
495 | arch/i386/kernel/cpu/cpufreq/elanfreq.c. | |
496 | ||
497 | elevator= [IOSCHED] | |
16ab3adf | 498 | Format: {"anticipatory" | "cfq" | "deadline" | "noop"} |
a9913044 RD |
499 | See Documentation/block/as-iosched.txt and |
500 | Documentation/block/deadline-iosched.txt for details. | |
501 | ||
aac04b32 | 502 | elfcorehdr= [IA-32, X86_64] |
a9913044 | 503 | Specifies physical address of start of kernel core |
aac04b32 VG |
504 | image elf header. Generally kexec loader will |
505 | pass this option to capture kernel. | |
506 | See Documentation/kdump/kdump.txt for details. | |
1da177e4 LT |
507 | |
508 | enforcing [SELINUX] Set initial enforcing status. | |
509 | Format: {"0" | "1"} | |
510 | See security/selinux/Kconfig help text. | |
511 | 0 -- permissive (log only, no denials). | |
512 | 1 -- enforcing (deny and log). | |
513 | Default value is 0. | |
514 | Value can be changed at runtime via /selinux/enforce. | |
515 | ||
516 | es1370= [HW,OSS] | |
517 | Format: <lineout>[,<micbias>] | |
518 | See also header of sound/oss/es1370.c. | |
519 | ||
520 | es1371= [HW,OSS] | |
521 | Format: <spdif>,[<nomix>,[<amplifier>]] | |
522 | See also header of sound/oss/es1371.c. | |
a9913044 | 523 | |
1da177e4 LT |
524 | ether= [HW,NET] Ethernet cards parameters |
525 | This option is obsoleted by the "netdev=" option, which | |
526 | has equivalent usage. See its documentation for details. | |
527 | ||
528 | eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog. | |
529 | Format: <io>[,<irq>] | |
530 | ||
531 | fd_mcs= [HW,SCSI] | |
532 | See header of drivers/scsi/fd_mcs.c. | |
533 | ||
534 | fdomain= [HW,SCSI] | |
535 | See header of drivers/scsi/fdomain.c. | |
536 | ||
537 | floppy= [HW] | |
538 | See Documentation/floppy.txt. | |
539 | ||
540 | ftape= [HW] Floppy Tape subsystem debugging options. | |
541 | See Documentation/ftape.txt. | |
542 | ||
543 | gamecon.map[2|3]= | |
544 | [HW,JOY] Multisystem joystick and NES/SNES/PSX pad | |
545 | support via parallel port (up to 5 devices per port) | |
546 | Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5> | |
547 | See also Documentation/input/joystick-parport.txt | |
548 | ||
549 | gamma= [HW,DRM] | |
550 | ||
551 | gdth= [HW,SCSI] | |
552 | See header of drivers/scsi/gdth.c. | |
553 | ||
554 | gpt [EFI] Forces disk with valid GPT signature but | |
555 | invalid Protective MBR to be treated as GPT. | |
556 | ||
557 | gscd= [HW,CD] | |
558 | Format: <io> | |
559 | ||
560 | gt96100eth= [NET] MIPS GT96100 Advanced Communication Controller | |
561 | ||
562 | gus= [HW,OSS] | |
563 | Format: <io>,<irq>,<dma>,<dma16> | |
a9913044 | 564 | |
1da177e4 LT |
565 | gvp11= [HW,SCSI] |
566 | ||
567 | hashdist= [KNL,NUMA] Large hashes allocated during boot | |
568 | are distributed across NUMA nodes. Defaults on | |
569 | for IA-64, off otherwise. | |
a9913044 | 570 | Format: 0 | 1 (for off | on) |
1da177e4 LT |
571 | |
572 | hcl= [IA-64] SGI's Hardware Graph compatibility layer | |
573 | ||
574 | hd= [EIDE] (E)IDE hard drive subsystem geometry | |
575 | Format: <cyl>,<head>,<sect> | |
576 | ||
577 | hd?= [HW] (E)IDE subsystem | |
578 | hd?lun= See Documentation/ide.txt. | |
579 | ||
580 | highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact | |
581 | size of <nn>. This works even on boxes that have no | |
582 | highmem otherwise. This also works to reduce highmem | |
583 | size on bigger boxes. | |
584 | ||
585 | hisax= [HW,ISDN] | |
586 | See Documentation/isdn/README.HiSax. | |
587 | ||
588 | hugepages= [HW,IA-32,IA-64] Maximal number of HugeTLB pages. | |
589 | ||
590 | noirqbalance [IA-32,SMP,KNL] Disable kernel irq balancing | |
591 | ||
592 | i8042.direct [HW] Put keyboard port into non-translated mode | |
593 | i8042.dumbkbd [HW] Pretend that controlled can only read data from | |
594 | keyboard and can not control its state | |
595 | (Don't attempt to blink the leds) | |
596 | i8042.noaux [HW] Don't check for auxiliary (== mouse) port | |
945ef0d4 | 597 | i8042.nokbd [HW] Don't check/create keyboard port |
1da177e4 LT |
598 | i8042.nomux [HW] Don't check presence of an active multiplexing |
599 | controller | |
600 | i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX | |
601 | controllers | |
602 | i8042.panicblink= | |
603 | [HW] Frequency with which keyboard LEDs should blink | |
604 | when kernel panics (default is 0.5 sec) | |
605 | i8042.reset [HW] Reset the controller during init and cleanup | |
606 | i8042.unlock [HW] Unlock (ignore) the keylock | |
607 | ||
608 | i810= [HW,DRM] | |
609 | ||
e70c9d5e DT |
610 | i8k.ignore_dmi [HW] Continue probing hardware even if DMI data |
611 | indicates that the driver is running on unsupported | |
612 | hardware. | |
1da177e4 LT |
613 | i8k.force [HW] Activate i8k driver even if SMM BIOS signature |
614 | does not match list of supported models. | |
615 | i8k.power_status | |
616 | [HW] Report power status in /proc/i8k | |
617 | (disabled by default) | |
618 | i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN | |
619 | capability is set. | |
620 | ||
621 | ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter | |
622 | See Documentation/mca.txt. | |
623 | ||
624 | icn= [HW,ISDN] | |
625 | Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]] | |
626 | ||
627 | ide= [HW] (E)IDE subsystem | |
628 | Format: ide=nodma or ide=doubler or ide=reverse | |
629 | See Documentation/ide.txt. | |
630 | ||
631 | ide?= [HW] (E)IDE subsystem | |
632 | Format: ide?=noprobe or chipset specific parameters. | |
633 | See Documentation/ide.txt. | |
a9913044 | 634 | |
1da177e4 LT |
635 | idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed |
636 | See Documentation/ide.txt. | |
637 | ||
638 | idle= [HW] | |
639 | Format: idle=poll or idle=halt | |
a9913044 | 640 | |
1da177e4 LT |
641 | ihash_entries= [KNL] |
642 | Set number of hash buckets for inode cache. | |
643 | ||
644 | in2000= [HW,SCSI] | |
645 | See header of drivers/scsi/in2000.c. | |
646 | ||
647 | init= [KNL] | |
648 | Format: <full_path> | |
649 | Run specified binary instead of /sbin/init as init | |
650 | process. | |
651 | ||
652 | initcall_debug [KNL] Trace initcalls as they are executed. Useful | |
653 | for working out where the kernel is dying during | |
654 | startup. | |
655 | ||
656 | initrd= [BOOT] Specify the location of the initial ramdisk | |
657 | ||
658 | inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver | |
659 | Format: <irq> | |
660 | ||
2bd0fa3b JB |
661 | combined_mode= [HW] control which driver uses IDE ports in combined |
662 | mode: legacy IDE driver, libata, or both | |
663 | (in the libata case, libata.atapi_enabled=1 may be | |
664 | useful as well). Note that using the ide or libata | |
665 | options may affect your device naming (e.g. by | |
666 | changing hdc to sdb). | |
667 | Format: combined (default), ide, or libata | |
668 | ||
1da177e4 LT |
669 | inttest= [IA64] |
670 | ||
671 | io7= [HW] IO7 for Marvel based alpha systems | |
672 | See comment before marvel_specify_io7 in | |
673 | arch/alpha/kernel/core_marvel.c. | |
674 | ||
675 | ip= [IP_PNP] | |
676 | See Documentation/nfsroot.txt. | |
677 | ||
678 | ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards | |
679 | See comment before ip2_setup() in drivers/char/ip2.c. | |
680 | ||
681 | ips= [HW,SCSI] Adaptec / IBM ServeRAID controller | |
682 | See header of drivers/scsi/ips.c. | |
683 | ||
200803df AC |
684 | irqfixup [HW] |
685 | When an interrupt is not handled search all handlers | |
686 | for it. Intended to get systems with badly broken | |
687 | firmware running. | |
688 | ||
689 | irqpoll [HW] | |
690 | When an interrupt is not handled search all handlers | |
691 | for it. Also check all handlers each timer | |
692 | interrupt. Intended to get systems with badly broken | |
693 | firmware running. | |
694 | ||
1da177e4 | 695 | isapnp= [ISAPNP] |
a9913044 | 696 | Format: <RDP>,<reset>,<pci_scan>,<verbosity> |
1da177e4 LT |
697 | |
698 | isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler. | |
699 | Format: <cpu number>,...,<cpu number> | |
700 | This option can be used to specify one or more CPUs | |
701 | to isolate from the general SMP balancing and scheduling | |
702 | algorithms. The only way to move a process onto or off | |
703 | an "isolated" CPU is via the CPU affinity syscalls. | |
704 | <cpu number> begins at 0 and the maximum value is | |
705 | "number of CPUs in system - 1". | |
706 | ||
707 | This option is the preferred way to isolate CPUs. The | |
a9913044 RD |
708 | alternative -- manually setting the CPU mask of all |
709 | tasks in the system -- can cause problems and | |
710 | suboptimal load balancer performance. | |
1da177e4 LT |
711 | |
712 | isp16= [HW,CD] | |
713 | Format: <io>,<irq>,<dma>,<setup> | |
714 | ||
a9913044 | 715 | iucv= [HW,NET] |
1da177e4 LT |
716 | |
717 | js= [HW,JOY] Analog joystick | |
718 | See Documentation/input/joystick.txt. | |
719 | ||
720 | keepinitrd [HW,ARM] | |
721 | ||
a9913044 | 722 | kstack=N [IA-32,X86-64] Print N words from the kernel stack |
1da177e4 LT |
723 | in oops dumps. |
724 | ||
725 | l2cr= [PPC] | |
726 | ||
a9913044 RD |
727 | lapic [IA-32,APIC] Enable the local APIC even if BIOS |
728 | disabled it. | |
1da177e4 LT |
729 | |
730 | lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip | |
731 | Format: addr:<io>,irq:<irq> | |
732 | ||
a9913044 RD |
733 | llsc*= [IA64] See function print_params() in |
734 | arch/ia64/sn/kernel/llsc4.c. | |
1da177e4 LT |
735 | |
736 | load_ramdisk= [RAM] List of ramdisks to load from floppy | |
737 | See Documentation/ramdisk.txt. | |
738 | ||
a6b25b67 RD |
739 | lockd.nlm_grace_period=P [NFS] Assign grace period. |
740 | Format: <integer> | |
1da177e4 | 741 | |
a6b25b67 RD |
742 | lockd.nlm_tcpport=N [NFS] Assign TCP port. |
743 | Format: <integer> | |
744 | ||
745 | lockd.nlm_timeout=T [NFS] Assign timeout value. | |
746 | Format: <integer> | |
747 | ||
748 | lockd.nlm_udpport=M [NFS] Assign UDP port. | |
749 | Format: <integer> | |
1da177e4 LT |
750 | |
751 | logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver | |
752 | Format: <irq> | |
753 | ||
754 | loglevel= All Kernel Messages with a loglevel smaller than the | |
755 | console loglevel will be printed to the console. It can | |
756 | also be changed with klogd or other programs. The | |
757 | loglevels are defined as follows: | |
758 | ||
759 | 0 (KERN_EMERG) system is unusable | |
760 | 1 (KERN_ALERT) action must be taken immediately | |
761 | 2 (KERN_CRIT) critical conditions | |
762 | 3 (KERN_ERR) error conditions | |
763 | 4 (KERN_WARNING) warning conditions | |
764 | 5 (KERN_NOTICE) normal but significant condition | |
765 | 6 (KERN_INFO) informational | |
766 | 7 (KERN_DEBUG) debug-level messages | |
767 | ||
768 | log_buf_len=n Sets the size of the printk ring buffer, in bytes. | |
a9913044 RD |
769 | Format: { n | nk | nM } |
770 | n must be a power of two. The default size | |
771 | is set in the kernel config file. | |
1da177e4 LT |
772 | |
773 | lp=0 [LP] Specify parallel ports to use, e.g, | |
774 | lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses | |
775 | lp=reset first parallel port). 'lp=0' disables the | |
776 | lp=auto printer driver. 'lp=reset' (which can be | |
777 | specified in addition to the ports) causes | |
778 | attached printers to be reset. Using | |
779 | lp=port1,port2,... specifies the parallel ports | |
780 | to associate lp devices with, starting with | |
781 | lp0. A port specification may be 'none' to skip | |
782 | that lp device, or a parport name such as | |
783 | 'parport0'. Specifying 'lp=auto' instead of a | |
784 | port specification list means that device IDs | |
785 | from each port should be examined, to see if | |
786 | an IEEE 1284-compliant printer is attached; if | |
787 | so, the driver will manage that printer. | |
788 | See also header of drivers/char/lp.c. | |
789 | ||
790 | lpj=n [KNL] | |
791 | Sets loops_per_jiffy to given constant, thus avoiding | |
792 | time-consuming boot-time autodetection (up to 250 ms per | |
793 | CPU). 0 enables autodetection (default). To determine | |
794 | the correct value for your kernel, boot with normal | |
795 | autodetection and see what value is printed. Note that | |
796 | on SMP systems the preset will be applied to all CPUs, | |
797 | which is likely to cause problems if your CPUs need | |
798 | significantly divergent settings. An incorrect value | |
799 | will cause delays in the kernel to be wrong, leading to | |
800 | unpredictable I/O errors and other breakage. Although | |
801 | unlikely, in the extreme case this might damage your | |
802 | hardware. | |
803 | ||
804 | ltpc= [NET] | |
805 | Format: <io>,<irq>,<dma> | |
806 | ||
a9913044 RD |
807 | mac5380= [HW,SCSI] Format: |
808 | <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> | |
1da177e4 | 809 | |
a9913044 RD |
810 | mac53c9x= [HW,SCSI] Format: |
811 | <num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags> | |
1da177e4 | 812 | |
a9913044 RD |
813 | machvec= [IA64] Force the use of a particular machine-vector |
814 | (machvec) in a generic kernel. | |
815 | Example: machvec=hpzx1_swiotlb | |
1da177e4 | 816 | |
a9913044 RD |
817 | mad16= [HW,OSS] Format: |
818 | <io>,<irq>,<dma>,<dma16>,<mpu_io>,<mpu_irq>,<joystick> | |
1da177e4 LT |
819 | |
820 | maui= [HW,OSS] | |
821 | Format: <io>,<irq> | |
a9913044 RD |
822 | |
823 | max_loop= [LOOP] Maximum number of loopback devices that can | |
1da177e4 LT |
824 | be mounted |
825 | Format: <1-256> | |
826 | ||
827 | maxcpus= [SMP] Maximum number of processors that an SMP kernel | |
828 | should make use of | |
829 | ||
2b2c3750 BP |
830 | max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or |
831 | equal to this physical address is ignored. | |
832 | ||
a9913044 | 833 | max_luns= [SCSI] Maximum number of LUNs to probe. |
1da177e4 LT |
834 | Should be between 1 and 2^32-1. |
835 | ||
836 | max_report_luns= | |
a9913044 | 837 | [SCSI] Maximum number of LUNs received. |
1da177e4 LT |
838 | Should be between 1 and 16384. |
839 | ||
840 | mca-pentium [BUGS=IA-32] | |
841 | ||
842 | mcatest= [IA-64] | |
843 | ||
844 | mcd= [HW,CD] | |
845 | Format: <port>,<irq>,<mitsumi_bug_93_wait> | |
846 | ||
847 | mcdx= [HW,CD] | |
848 | ||
849 | mce [IA-32] Machine Check Exception | |
850 | ||
851 | md= [HW] RAID subsystems devices and level | |
852 | See Documentation/md.txt. | |
a9913044 | 853 | |
1da177e4 LT |
854 | mdacon= [MDA] |
855 | Format: <first>,<last> | |
856 | Specifies range of consoles to be captured by the MDA. | |
a9913044 | 857 | |
1da177e4 LT |
858 | mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory |
859 | Amount of memory to be used when the kernel is not able | |
860 | to see the whole system memory or for test. | |
861 | [IA-32] Use together with memmap= to avoid physical | |
862 | address space collisions. Without memmap= PCI devices | |
863 | could be placed at addresses belonging to unused RAM. | |
864 | ||
865 | mem=nopentium [BUGS=IA-32] Disable usage of 4MB pages for kernel | |
866 | memory. | |
867 | ||
69cda7b1 | 868 | memmap=exactmap [KNL,IA-32,X86_64] Enable setting of an exact |
1da177e4 LT |
869 | E820 memory map, as specified by the user. |
870 | Such memmap=exactmap lines can be constructed based on | |
871 | BIOS output or other requirements. See the memmap=nn@ss | |
872 | option description. | |
873 | ||
874 | memmap=nn[KMG]@ss[KMG] | |
875 | [KNL] Force usage of a specific region of memory | |
876 | Region of memory to be used, from ss to ss+nn. | |
877 | ||
878 | memmap=nn[KMG]#ss[KMG] | |
879 | [KNL,ACPI] Mark specific memory as ACPI data. | |
880 | Region of memory to be used, from ss to ss+nn. | |
881 | ||
882 | memmap=nn[KMG]$ss[KMG] | |
883 | [KNL,ACPI] Mark specific memory as reserved. | |
884 | Region of memory to be used, from ss to ss+nn. | |
885 | ||
886 | meye.*= [HW] Set MotionEye Camera parameters | |
887 | See Documentation/video4linux/meye.txt. | |
888 | ||
889 | mga= [HW,DRM] | |
890 | ||
198e2f18 | 891 | migration_cost= |
892 | [KNL,SMP] debug: override scheduler migration costs | |
893 | Format: <level-1-usecs>,<level-2-usecs>,... | |
894 | This debugging option can be used to override the | |
895 | default scheduler migration cost matrix. The numbers | |
896 | are indexed by 'CPU domain distance'. | |
897 | E.g. migration_cost=1000,2000,3000 on an SMT NUMA | |
898 | box will set up an intra-core migration cost of | |
899 | 1 msec, an inter-core migration cost of 2 msecs, | |
900 | and an inter-node migration cost of 3 msecs. | |
901 | ||
902 | WARNING: using the wrong values here can break | |
903 | scheduler performance, so it's only for scheduler | |
904 | development purposes, not production environments. | |
905 | ||
906 | migration_debug= | |
907 | [KNL,SMP] migration cost auto-detect verbosity | |
908 | Format=<0|1|2> | |
909 | If a system's migration matrix reported at bootup | |
910 | seems erroneous then this option can be used to | |
911 | increase verbosity of the detection process. | |
912 | We default to 0 (no extra messages), 1 will print | |
913 | some more information, and 2 will be really | |
914 | verbose (probably only useful if you also have a | |
915 | serial console attached to the system). | |
916 | ||
917 | migration_factor= | |
918 | [KNL,SMP] multiply/divide migration costs by a factor | |
919 | Format=<percent> | |
920 | This debug option can be used to proportionally | |
921 | increase or decrease the auto-detected migration | |
922 | costs for all entries of the migration matrix. | |
923 | E.g. migration_factor=150 will increase migration | |
924 | costs by 50%. (and thus the scheduler will be less | |
925 | eager migrating cache-hot tasks) | |
926 | migration_factor=80 will decrease migration costs | |
927 | by 20%. (thus the scheduler will be more eager to | |
928 | migrate tasks) | |
929 | ||
930 | WARNING: using the wrong values here can break | |
931 | scheduler performance, so it's only for scheduler | |
932 | development purposes, not production environments. | |
933 | ||
1da177e4 LT |
934 | mousedev.tap_time= |
935 | [MOUSE] Maximum time between finger touching and | |
936 | leaving touchpad surface for touch to be considered | |
937 | a tap and be reported as a left button click (for | |
938 | touchpads working in absolute mode only). | |
939 | Format: <msecs> | |
940 | mousedev.xres= [MOUSE] Horizontal screen resolution, used for devices | |
941 | reporting absolute coordinates, such as tablets | |
942 | mousedev.yres= [MOUSE] Vertical screen resolution, used for devices | |
943 | reporting absolute coordinates, such as tablets | |
944 | ||
945 | mpu401= [HW,OSS] | |
946 | Format: <io>,<irq> | |
947 | ||
948 | MTD_Partition= [MTD] | |
949 | Format: <name>,<region-number>,<size>,<offset> | |
950 | ||
a9913044 RD |
951 | MTD_Region= [MTD] Format: |
952 | <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>] | |
1da177e4 LT |
953 | |
954 | mtdparts= [MTD] | |
955 | See drivers/mtd/cmdline.c. | |
956 | ||
957 | mtouchusb.raw_coordinates= | |
a9913044 RD |
958 | [HW] Make the MicroTouch USB driver use raw coordinates |
959 | ('y', default) or cooked coordinates ('n') | |
1da177e4 LT |
960 | |
961 | n2= [NET] SDL Inc. RISCom/N2 synchronous serial card | |
962 | ||
963 | NCR_D700= [HW,SCSI] | |
964 | See header of drivers/scsi/NCR_D700.c. | |
965 | ||
966 | ncr5380= [HW,SCSI] | |
967 | ||
968 | ncr53c400= [HW,SCSI] | |
969 | ||
970 | ncr53c400a= [HW,SCSI] | |
971 | ||
972 | ncr53c406a= [HW,SCSI] | |
973 | ||
974 | ncr53c8xx= [HW,SCSI] | |
975 | ||
976 | netdev= [NET] Network devices parameters | |
977 | Format: <irq>,<io>,<mem_start>,<mem_end>,<name> | |
978 | Note that mem_start is often overloaded to mean | |
979 | something different and driver-specific. | |
a9913044 RD |
980 | This usage is only documented in each driver source |
981 | file if at all. | |
982 | ||
1da177e4 LT |
983 | nfsaddrs= [NFS] |
984 | See Documentation/nfsroot.txt. | |
985 | ||
986 | nfsroot= [NFS] nfs root filesystem for disk-less boxes. | |
987 | See Documentation/nfsroot.txt. | |
988 | ||
a72b4422 TM |
989 | nfs.callback_tcpport= |
990 | [NFS] set the TCP port on which the NFSv4 callback | |
991 | channel should listen. | |
992 | ||
58df095b TM |
993 | nfs.idmap_cache_timeout= |
994 | [NFS] set the maximum lifetime for idmapper cache | |
995 | entries. | |
996 | ||
1da177e4 LT |
997 | nmi_watchdog= [KNL,BUGS=IA-32] Debugging features for SMP kernels |
998 | ||
999 | no387 [BUGS=IA-32] Tells the kernel to use the 387 maths | |
1000 | emulation library even if a 387 maths coprocessor | |
1001 | is present. | |
1002 | ||
a9913044 RD |
1003 | noalign [KNL,ARM] |
1004 | ||
1da177e4 LT |
1005 | noapic [SMP,APIC] Tells the kernel to not make use of any |
1006 | IOAPICs that may be present in the system. | |
1007 | ||
1008 | noasync [HW,M68K] Disables async and sync negotiation for | |
1009 | all devices. | |
1010 | ||
1011 | nobats [PPC] Do not use BATs for mapping kernel lowmem | |
1012 | on "Classic" PPC cores. | |
1013 | ||
1014 | nocache [ARM] | |
a9913044 | 1015 | |
1da177e4 LT |
1016 | nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects. |
1017 | ||
1018 | noexec [IA-64] | |
1019 | ||
a9913044 | 1020 | noexec [IA-32,X86-64] |
1da177e4 LT |
1021 | noexec=on: enable non-executable mappings (default) |
1022 | noexec=off: disable nn-executable mappings | |
1023 | ||
4f886511 CE |
1024 | nofxsr [BUGS=IA-32] Disables x86 floating point extended |
1025 | register save and restore. The kernel will only save | |
1026 | legacy floating-point registers on task switch. | |
1da177e4 LT |
1027 | |
1028 | nohlt [BUGS=ARM] | |
a9913044 | 1029 | |
1da177e4 LT |
1030 | no-hlt [BUGS=IA-32] Tells the kernel that the hlt |
1031 | instruction doesn't work correctly and not to | |
1032 | use it. | |
1033 | ||
1034 | nohalt [IA-64] Tells the kernel not to use the power saving | |
1035 | function PAL_HALT_LIGHT when idle. This increases | |
1036 | power-consumption. On the positive side, it reduces | |
1037 | interrupt wake-up latency, which may improve performance | |
1038 | in certain environments such as networked servers or | |
1039 | real-time systems. | |
1040 | ||
1041 | noirqdebug [IA-32] Disables the code which attempts to detect and | |
1042 | disable unhandled interrupt sources. | |
1043 | ||
1044 | noisapnp [ISAPNP] Disables ISA PnP code. | |
1045 | ||
1046 | noinitrd [RAM] Tells the kernel not to load any configured | |
1047 | initial RAM disk. | |
1048 | ||
1049 | nointroute [IA-64] | |
1050 | ||
1051 | nolapic [IA-32,APIC] Do not enable or use the local APIC. | |
1052 | ||
1053 | noltlbs [PPC] Do not use large page/tlb entries for kernel | |
1054 | lowmem mapping on PPC40x. | |
1055 | ||
312f1f01 H |
1056 | nomca [IA-64] Disable machine check abort handling |
1057 | ||
abe37e5a H |
1058 | nomce [IA-32] Machine Check Exception |
1059 | ||
1da177e4 LT |
1060 | noresidual [PPC] Don't use residual data on PReP machines. |
1061 | ||
a9913044 RD |
1062 | noresume [SWSUSP] Disables resume and restores original swap |
1063 | space. | |
1064 | ||
1da177e4 LT |
1065 | no-scroll [VGA] Disables scrollback. |
1066 | This is required for the Braillex ib80-piezo Braille | |
1067 | reader made by F.H. Papenmeier (Germany). | |
1068 | ||
1069 | nosbagart [IA-64] | |
1070 | ||
4f886511 CE |
1071 | nosep [BUGS=IA-32] Disables x86 SYSENTER/SYSEXIT support. |
1072 | ||
1da177e4 LT |
1073 | nosmp [SMP] Tells an SMP kernel to act as a UP kernel. |
1074 | ||
1075 | nosync [HW,M68K] Disables sync negotiation for all devices. | |
1076 | ||
1077 | notsc [BUGS=IA-32] Disable Time Stamp Counter | |
1078 | ||
1079 | nousb [USB] Disable the USB subsystem | |
1080 | ||
1081 | nowb [ARM] | |
a9913044 | 1082 | |
a61c2d78 DJ |
1083 | nr_uarts= [SERIAL] maximum number of UARTs to be registered. |
1084 | ||
1da177e4 LT |
1085 | opl3= [HW,OSS] |
1086 | Format: <io> | |
1087 | ||
1088 | opl3sa= [HW,OSS] | |
1089 | Format: <io>,<irq>,<dma>,<dma2>,<mpu_io>,<mpu_irq> | |
1090 | ||
a9913044 RD |
1091 | opl3sa2= [HW,OSS] Format: |
1092 | <io>,<irq>,<dma>,<dma2>,<mss_io>,<mpu_io>,<ymode>,<loopback>[,<isapnp>,<multiple] | |
1093 | ||
1da177e4 LT |
1094 | oprofile.timer= [HW] |
1095 | Use timer interrupt instead of performance counters | |
1096 | ||
1097 | optcd= [HW,CD] | |
1098 | Format: <io> | |
1099 | ||
1100 | osst= [HW,SCSI] SCSI Tape Driver | |
1101 | Format: <buffer_size>,<write_threshold> | |
1102 | See also Documentation/scsi/st.txt. | |
1103 | ||
1104 | panic= [KNL] Kernel behaviour on panic | |
1105 | Format: <timeout> | |
1106 | ||
1107 | parkbd.port= [HW] Parallel port number the keyboard adapter is | |
1108 | connected to, default is 0. | |
1109 | Format: <parport#> | |
1110 | parkbd.mode= [HW] Parallel port keyboard adapter mode of operation, | |
1111 | 0 for XT, 1 for AT (default is AT). | |
a9913044 RD |
1112 | Format: <mode> |
1113 | ||
1114 | parport= [HW,PPT] Specify parallel ports. 0 disables. | |
1115 | Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] } | |
1116 | Use 'auto' to force the driver to use any | |
1117 | IRQ/DMA settings detected (the default is to | |
1118 | ignore detected IRQ/DMA settings because of | |
1119 | possible conflicts). You can specify the base | |
1120 | address, IRQ, and DMA settings; IRQ and DMA | |
1121 | should be numbers, or 'auto' (for using detected | |
1122 | settings on that particular port), or 'nofifo' | |
1123 | (to avoid using a FIFO even if it is detected). | |
1124 | Parallel ports are assigned in the order they | |
1125 | are specified on the command line, starting | |
1126 | with parport0. | |
1127 | ||
1128 | parport_init_mode= [HW,PPT] | |
1129 | Configure VIA parallel port to operate in | |
1130 | a specific mode. This is necessary on Pegasos | |
1131 | computer where firmware has no options for setting | |
1132 | up parallel port mode and sets it to spp. | |
1133 | Currently this function knows 686a and 8231 chips. | |
1da177e4 LT |
1134 | Format: [spp|ps2|epp|ecp|ecpepp] |
1135 | ||
a9913044 RD |
1136 | pas2= [HW,OSS] Format: |
1137 | <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16> | |
1138 | ||
1da177e4 LT |
1139 | pas16= [HW,SCSI] |
1140 | See header of drivers/scsi/pas16.c. | |
1141 | ||
dd287796 AM |
1142 | pause_on_oops= |
1143 | Halt all CPUs after the first oops has been printed for | |
1144 | the specified number of seconds. This is to be used if | |
1145 | your oopses keep scrolling off the screen. | |
1146 | ||
1da177e4 LT |
1147 | pcbit= [HW,ISDN] |
1148 | ||
1149 | pcd. [PARIDE] | |
1150 | See header of drivers/block/paride/pcd.c. | |
1151 | See also Documentation/paride.txt. | |
1152 | ||
a9913044 RD |
1153 | pci=option[,option...] [PCI] various PCI subsystem options: |
1154 | off [IA-32] don't probe for the PCI bus | |
1155 | bios [IA-32] force use of PCI BIOS, don't access | |
1156 | the hardware directly. Use this if your machine | |
1157 | has a non-standard PCI host bridge. | |
1158 | nobios [IA-32] disallow use of PCI BIOS, only direct | |
1159 | hardware access methods are allowed. Use this | |
1160 | if you experience crashes upon bootup and you | |
1161 | suspect they are caused by the BIOS. | |
1162 | conf1 [IA-32] Force use of PCI Configuration | |
1163 | Mechanism 1. | |
1164 | conf2 [IA-32] Force use of PCI Configuration | |
1165 | Mechanism 2. | |
61be6d66 BH |
1166 | nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI |
1167 | Configuration | |
309e57df MW |
1168 | nomsi [MSI] If the PCI_MSI kernel config parameter is |
1169 | enabled, this kernel boot option can be used to | |
1170 | disable the use of MSI interrupts system-wide. | |
a9913044 RD |
1171 | nosort [IA-32] Don't sort PCI devices according to |
1172 | order given by the PCI BIOS. This sorting is | |
1173 | done to get a device order compatible with | |
1174 | older kernels. | |
1175 | biosirq [IA-32] Use PCI BIOS calls to get the interrupt | |
1176 | routing table. These calls are known to be buggy | |
1177 | on several machines and they hang the machine | |
1178 | when used, but on other computers it's the only | |
1179 | way to get the interrupt routing table. Try | |
1180 | this option if the kernel is unable to allocate | |
1181 | IRQs or discover secondary PCI buses on your | |
1182 | motherboard. | |
1183 | rom [IA-32] Assign address space to expansion ROMs. | |
1184 | Use with caution as certain devices share | |
1185 | address decoders between ROMs and other | |
1186 | resources. | |
1187 | irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be | |
1188 | assigned automatically to PCI devices. You can | |
1189 | make the kernel exclude IRQs of your ISA cards | |
1190 | this way. | |
120bb424 | 1191 | pirqaddr=0xAAAAA [IA-32] Specify the physical address |
a9913044 RD |
1192 | of the PIRQ table (normally generated |
1193 | by the BIOS) if it is outside the | |
1194 | F0000h-100000h range. | |
1195 | lastbus=N [IA-32] Scan all buses thru bus #N. Can be | |
1196 | useful if the kernel is unable to find your | |
1197 | secondary buses and you want to tell it | |
1198 | explicitly which ones they are. | |
1199 | assign-busses [IA-32] Always assign all PCI bus | |
1200 | numbers ourselves, overriding | |
1201 | whatever the firmware may have done. | |
1202 | usepirqmask [IA-32] Honor the possible IRQ mask stored | |
1203 | in the BIOS $PIR table. This is needed on | |
1204 | some systems with broken BIOSes, notably | |
1205 | some HP Pavilion N5400 and Omnibook XE3 | |
1206 | notebooks. This will have no effect if ACPI | |
1207 | IRQ routing is enabled. | |
1208 | noacpi [IA-32] Do not use ACPI for IRQ routing | |
1209 | or for PCI scanning. | |
1210 | routeirq Do IRQ routing for all PCI devices. | |
1211 | This is normally done in pci_enable_device(), | |
1212 | so this option is a temporary workaround | |
1213 | for broken drivers that don't call it. | |
1214 | firmware [ARM] Do not re-enumerate the bus but instead | |
1215 | just use the configuration from the | |
1216 | bootloader. This is currently used on | |
1217 | IXP2000 systems where the bus has to be | |
1218 | configured a certain way for adjunct CPUs. | |
1da177e4 LT |
1219 | |
1220 | pcmv= [HW,PCMCIA] BadgePAD 4 | |
1221 | ||
1222 | pd. [PARIDE] | |
1223 | See Documentation/paride.txt. | |
1224 | ||
1225 | pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at | |
1226 | boot time. | |
1227 | Format: { 0 | 1 } | |
1228 | See arch/parisc/kernel/pdc_chassis.c | |
1229 | ||
1230 | pf. [PARIDE] | |
1231 | See Documentation/paride.txt. | |
1232 | ||
1233 | pg. [PARIDE] | |
1234 | See Documentation/paride.txt. | |
1235 | ||
1236 | pirq= [SMP,APIC] Manual mp-table setup | |
1237 | See Documentation/i386/IO-APIC.txt. | |
1238 | ||
1239 | plip= [PPT,NET] Parallel port network link | |
1240 | Format: { parport<nr> | timid | 0 } | |
1241 | See also Documentation/parport.txt. | |
1242 | ||
1243 | pnpacpi= [ACPI] | |
1244 | { off } | |
1245 | ||
1246 | pnpbios= [ISAPNP] | |
1247 | { on | off | curr | res | no-curr | no-res } | |
1248 | ||
1249 | pnp_reserve_irq= | |
1250 | [ISAPNP] Exclude IRQs for the autoconfiguration | |
1251 | ||
1252 | pnp_reserve_dma= | |
1253 | [ISAPNP] Exclude DMAs for the autoconfiguration | |
1254 | ||
1255 | pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration | |
a9913044 | 1256 | Ranges are in pairs (I/O port base and size). |
1da177e4 LT |
1257 | |
1258 | pnp_reserve_mem= | |
a9913044 RD |
1259 | [ISAPNP] Exclude memory regions for the |
1260 | autoconfiguration. | |
1da177e4 LT |
1261 | Ranges are in pairs (memory base and size). |
1262 | ||
1263 | profile= [KNL] Enable kernel profiling via /proc/profile | |
a9913044 RD |
1264 | Format: [schedule,]<number> |
1265 | Param: "schedule" - profile schedule points. | |
1266 | Param: <number> - step/bucket size as a power of 2 for | |
1267 | statistical time based profiling. | |
1da177e4 | 1268 | |
a9913044 | 1269 | processor.max_cstate= [HW,ACPI] |
1da177e4 LT |
1270 | Limit processor to maximum C-state |
1271 | max_cstate=9 overrides any DMI blacklist limit. | |
1272 | ||
41c0d868 LB |
1273 | processor.nocst [HW,ACPI] |
1274 | Ignore the _CST method to determine C-states, | |
1275 | instead using the legacy FADT method | |
1276 | ||
1da177e4 LT |
1277 | prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk |
1278 | before loading. | |
1279 | See Documentation/ramdisk.txt. | |
1280 | ||
a9913044 RD |
1281 | psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to |
1282 | probe for; one of (bare|imps|exps|lifebook|any). | |
1da177e4 LT |
1283 | psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports |
1284 | per second. | |
a9913044 RD |
1285 | psmouse.resetafter= [HW,MOUSE] |
1286 | Try to reset the device after so many bad packets | |
1da177e4 LT |
1287 | (0 = never). |
1288 | psmouse.resolution= | |
1289 | [HW,MOUSE] Set desired mouse resolution, in dpi. | |
1290 | psmouse.smartscroll= | |
a9913044 | 1291 | [HW,MOUSE] Controls Logitech smartscroll autorepeat. |
1da177e4 LT |
1292 | 0 = disabled, 1 = enabled (default). |
1293 | ||
1294 | pss= [HW,OSS] Personal Sound System (ECHO ESC614) | |
a9913044 RD |
1295 | Format: |
1296 | <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> | |
1da177e4 LT |
1297 | |
1298 | pt. [PARIDE] | |
1299 | See Documentation/paride.txt. | |
1300 | ||
1301 | quiet= [KNL] Disable log messages | |
a9913044 | 1302 | |
1da177e4 LT |
1303 | r128= [HW,DRM] |
1304 | ||
1305 | raid= [HW,RAID] | |
1306 | See Documentation/md.txt. | |
1307 | ||
1308 | ramdisk= [RAM] Sizes of RAM disks in kilobytes [deprecated] | |
1309 | See Documentation/ramdisk.txt. | |
1310 | ||
a9913044 | 1311 | ramdisk_blocksize= [RAM] |
1da177e4 | 1312 | See Documentation/ramdisk.txt. |
a9913044 | 1313 | |
1da177e4 LT |
1314 | ramdisk_size= [RAM] Sizes of RAM disks in kilobytes |
1315 | New name for the ramdisk parameter. | |
1316 | See Documentation/ramdisk.txt. | |
1317 | ||
21a1ea9e DS |
1318 | rcu.blimit= [KNL,BOOT] Set maximum number of finished |
1319 | RCU callbacks to process in one batch. | |
1320 | ||
1321 | rcu.qhimark= [KNL,BOOT] Set threshold of queued | |
1322 | RCU callbacks over which batch limiting is disabled. | |
1323 | ||
1324 | rcu.qlowmark= [KNL,BOOT] Set threshold of queued | |
1325 | RCU callbacks below which batch limiting is re-enabled. | |
1326 | ||
1327 | rcu.rsinterval= [KNL,BOOT,SMP] Set the number of additional | |
1328 | RCU callbacks to queued before forcing reschedule | |
1329 | on all cpus. | |
1330 | ||
ffdfc409 OJ |
1331 | rdinit= [KNL] |
1332 | Format: <full_path> | |
1333 | Run specified binary instead of /init from the ramdisk, | |
1334 | used for early userspace startup. See initrd. | |
1335 | ||
1da177e4 LT |
1336 | reboot= [BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode |
1337 | Format: <reboot_mode>[,<reboot_mode2>[,...]] | |
1338 | See arch/*/kernel/reboot.c. | |
1339 | ||
1340 | reserve= [KNL,BUGS] Force the kernel to ignore some iomem area | |
1341 | ||
a9913044 RD |
1342 | resume= [SWSUSP] |
1343 | Specify the partition device for software suspend | |
1da177e4 LT |
1344 | |
1345 | rhash_entries= [KNL,NET] | |
1346 | Set number of hash buckets for route cache | |
1347 | ||
1348 | riscom8= [HW,SERIAL] | |
1349 | Format: <io_board1>[,<io_board2>[,...<io_boardN>]] | |
1350 | ||
1351 | ro [KNL] Mount root device read-only on boot | |
1352 | ||
1353 | root= [KNL] Root filesystem | |
1354 | ||
1355 | rootdelay= [KNL] Delay (in seconds) to pause before attempting to | |
1356 | mount the root filesystem | |
1357 | ||
1358 | rootflags= [KNL] Set root filesystem mount option string | |
1359 | ||
1360 | rootfstype= [KNL] Set root filesystem type | |
1361 | ||
1362 | rw [KNL] Mount root device read-write on boot | |
1363 | ||
1364 | S [KNL] Run init in single mode | |
1365 | ||
1366 | sa1100ir [NET] | |
1367 | See drivers/net/irda/sa1100_ir.c. | |
1368 | ||
1369 | sb= [HW,OSS] | |
1370 | Format: <io>,<irq>,<dma>,<dma2> | |
1371 | ||
1372 | sbni= [NET] Granch SBNI12 leased line adapter | |
a9913044 | 1373 | |
1da177e4 LT |
1374 | sbpcd= [HW,CD] Soundblaster CD adapter |
1375 | Format: <io>,<type> | |
1376 | See a comment before function sbpcd_setup() in | |
1377 | drivers/cdrom/sbpcd.c. | |
1378 | ||
1379 | sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver | |
1380 | Format: <io>[,<timeout>[,<isapnp>]] | |
1381 | ||
1382 | scsi_debug_*= [SCSI] | |
1383 | See drivers/scsi/scsi_debug.c. | |
1384 | ||
1385 | scsi_default_dev_flags= | |
1386 | [SCSI] SCSI default device flags | |
1387 | Format: <integer> | |
1388 | ||
1389 | scsi_dev_flags= [SCSI] Black/white list entry for vendor and model | |
1390 | Format: <vendor>:<model>:<flags> | |
1391 | (flags are integer value) | |
1392 | ||
1393 | scsi_logging= [SCSI] | |
1394 | ||
1395 | selinux [SELINUX] Disable or enable SELinux at boot time. | |
1396 | Format: { "0" | "1" } | |
1397 | See security/selinux/Kconfig help text. | |
1398 | 0 -- disable. | |
1399 | 1 -- enable. | |
1400 | Default value is set via kernel config option. | |
1401 | If enabled at boot time, /selinux/disable can be used | |
1402 | later to disable prior to initial policy load. | |
1403 | ||
1404 | serialnumber [BUGS=IA-32] | |
1405 | ||
a9913044 RD |
1406 | sg_def_reserved_size= [SCSI] |
1407 | ||
1da177e4 LT |
1408 | sgalaxy= [HW,OSS] |
1409 | Format: <io>,<irq>,<dma>,<dma2>,<sgbase> | |
1410 | ||
1411 | shapers= [NET] | |
1412 | Maximal number of shapers. | |
a9913044 | 1413 | |
1da177e4 LT |
1414 | sim710= [SCSI,HW] |
1415 | See header of drivers/scsi/sim710.c. | |
1416 | ||
1417 | simeth= [IA-64] | |
1418 | simscsi= | |
a9913044 | 1419 | |
1da177e4 LT |
1420 | sjcd= [HW,CD] |
1421 | Format: <io>,<irq>,<dma> | |
1422 | See header of drivers/cdrom/sjcd.c. | |
1423 | ||
1424 | slram= [HW,MTD] | |
1425 | ||
1426 | smart2= [HW] | |
1427 | Format: <io1>[,<io2>[,...,<io8>]] | |
1428 | ||
1429 | snd-ad1816a= [HW,ALSA] | |
1430 | ||
1431 | snd-ad1848= [HW,ALSA] | |
1432 | ||
1433 | snd-ali5451= [HW,ALSA] | |
1434 | ||
1435 | snd-als100= [HW,ALSA] | |
1436 | ||
1437 | snd-als4000= [HW,ALSA] | |
1438 | ||
1439 | snd-azt2320= [HW,ALSA] | |
1440 | ||
1441 | snd-cmi8330= [HW,ALSA] | |
1442 | ||
1443 | snd-cmipci= [HW,ALSA] | |
1444 | ||
1445 | snd-cs4231= [HW,ALSA] | |
1446 | ||
1447 | snd-cs4232= [HW,ALSA] | |
1448 | ||
1449 | snd-cs4236= [HW,ALSA] | |
1450 | ||
1451 | snd-cs4281= [HW,ALSA] | |
1452 | ||
1453 | snd-cs46xx= [HW,ALSA] | |
1454 | ||
1455 | snd-dt019x= [HW,ALSA] | |
1456 | ||
1457 | snd-dummy= [HW,ALSA] | |
1458 | ||
1459 | snd-emu10k1= [HW,ALSA] | |
1460 | ||
1461 | snd-ens1370= [HW,ALSA] | |
1462 | ||
1463 | snd-ens1371= [HW,ALSA] | |
1464 | ||
1465 | snd-es968= [HW,ALSA] | |
1466 | ||
1467 | snd-es1688= [HW,ALSA] | |
1468 | ||
1469 | snd-es18xx= [HW,ALSA] | |
1470 | ||
1471 | snd-es1938= [HW,ALSA] | |
1472 | ||
1473 | snd-es1968= [HW,ALSA] | |
1474 | ||
1475 | snd-fm801= [HW,ALSA] | |
1476 | ||
1477 | snd-gusclassic= [HW,ALSA] | |
1478 | ||
1479 | snd-gusextreme= [HW,ALSA] | |
1480 | ||
1481 | snd-gusmax= [HW,ALSA] | |
1482 | ||
1483 | snd-hdsp= [HW,ALSA] | |
1484 | ||
1485 | snd-ice1712= [HW,ALSA] | |
1486 | ||
1487 | snd-intel8x0= [HW,ALSA] | |
1488 | ||
1489 | snd-interwave= [HW,ALSA] | |
1490 | ||
1491 | snd-interwave-stb= | |
1492 | [HW,ALSA] | |
1493 | ||
1494 | snd-korg1212= [HW,ALSA] | |
1495 | ||
1496 | snd-maestro3= [HW,ALSA] | |
1497 | ||
1498 | snd-mpu401= [HW,ALSA] | |
1499 | ||
1500 | snd-mtpav= [HW,ALSA] | |
1501 | ||
1502 | snd-nm256= [HW,ALSA] | |
1503 | ||
1504 | snd-opl3sa2= [HW,ALSA] | |
1505 | ||
1506 | snd-opti92x-ad1848= | |
1507 | [HW,ALSA] | |
1508 | ||
1509 | snd-opti92x-cs4231= | |
1510 | [HW,ALSA] | |
1511 | ||
1512 | snd-opti93x= [HW,ALSA] | |
1513 | ||
1514 | snd-pmac= [HW,ALSA] | |
1515 | ||
1516 | snd-rme32= [HW,ALSA] | |
1517 | ||
1518 | snd-rme96= [HW,ALSA] | |
1519 | ||
1520 | snd-rme9652= [HW,ALSA] | |
1521 | ||
1522 | snd-sb8= [HW,ALSA] | |
1523 | ||
1524 | snd-sb16= [HW,ALSA] | |
1525 | ||
1526 | snd-sbawe= [HW,ALSA] | |
1527 | ||
1528 | snd-serial= [HW,ALSA] | |
1529 | ||
1530 | snd-sgalaxy= [HW,ALSA] | |
1531 | ||
1532 | snd-sonicvibes= [HW,ALSA] | |
1533 | ||
1534 | snd-sun-amd7930= | |
1535 | [HW,ALSA] | |
1536 | ||
1537 | snd-sun-cs4231= [HW,ALSA] | |
1538 | ||
1539 | snd-trident= [HW,ALSA] | |
1540 | ||
1541 | snd-usb-audio= [HW,ALSA,USB] | |
1542 | ||
1543 | snd-via82xx= [HW,ALSA] | |
1544 | ||
1545 | snd-virmidi= [HW,ALSA] | |
1546 | ||
1547 | snd-wavefront= [HW,ALSA] | |
1548 | ||
1549 | snd-ymfpci= [HW,ALSA] | |
a9913044 | 1550 | |
1da177e4 LT |
1551 | sonicvibes= [HW,OSS] |
1552 | Format: <reverb> | |
a9913044 | 1553 | |
1da177e4 LT |
1554 | sonycd535= [HW,CD] |
1555 | Format: <io>[,<irq>] | |
1556 | ||
1557 | sonypi.*= [HW] Sony Programmable I/O Control Device driver | |
1558 | See Documentation/sonypi.txt | |
1559 | ||
1560 | specialix= [HW,SERIAL] Specialix multi-serial port adapter | |
1561 | See Documentation/specialix.txt. | |
1562 | ||
1563 | spia_io_base= [HW,MTD] | |
1564 | spia_fio_base= | |
1565 | spia_pedr= | |
1566 | spia_peddr= | |
1567 | ||
1568 | sscape= [HW,OSS] | |
1569 | Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq> | |
a9913044 | 1570 | |
1da177e4 LT |
1571 | st= [HW,SCSI] SCSI tape parameters (buffers, etc.) |
1572 | See Documentation/scsi/st.txt. | |
1573 | ||
1574 | st0x= [HW,SCSI] | |
1575 | See header of drivers/scsi/seagate.c. | |
1576 | ||
1577 | sti= [PARISC,HW] | |
1578 | Format: <num> | |
1579 | Set the STI (builtin display/keyboard on the HP-PARISC | |
1580 | machines) console (graphic card) which should be used | |
1581 | as the initial boot-console. | |
1582 | See also comment in drivers/video/console/sticore.c. | |
1583 | ||
1584 | sti_font= [HW] | |
1585 | See comment in drivers/video/console/sticore.c. | |
1586 | ||
1587 | stifb= [HW] | |
1588 | Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]] | |
1589 | ||
1da177e4 | 1590 | swiotlb= [IA-64] Number of I/O TLB slabs |
a9913044 | 1591 | |
1da177e4 LT |
1592 | switches= [HW,M68k] |
1593 | ||
1594 | sym53c416= [HW,SCSI] | |
1595 | See header of drivers/scsi/sym53c416.c. | |
1596 | ||
1597 | t128= [HW,SCSI] | |
1598 | See header of drivers/scsi/t128.c. | |
1599 | ||
1600 | tdfx= [HW,DRM] | |
1601 | ||
1602 | thash_entries= [KNL,NET] | |
1603 | Set number of hash buckets for TCP connection | |
1604 | ||
1605 | time Show timing data prefixed to each printk message line | |
1606 | ||
1607 | tipar.timeout= [HW,PPT] | |
1608 | Set communications timeout in tenths of a second | |
1609 | (default 15). | |
1610 | ||
1611 | tipar.delay= [HW,PPT] | |
1612 | Set inter-bit delay in microseconds (default 10). | |
1613 | ||
1614 | tmc8xx= [HW,SCSI] | |
1615 | See header of drivers/scsi/seagate.c. | |
1616 | ||
1617 | tmscsim= [HW,SCSI] | |
1618 | See comment before function dc390_setup() in | |
1619 | drivers/scsi/tmscsim.c. | |
1620 | ||
1621 | tp720= [HW,PS2] | |
1622 | ||
1623 | trix= [HW,OSS] MediaTrix AudioTrix Pro | |
a9913044 RD |
1624 | Format: |
1625 | <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> | |
1626 | ||
1da177e4 LT |
1627 | tsdev.xres= [TS] Horizontal screen resolution. |
1628 | tsdev.yres= [TS] Vertical screen resolution. | |
1629 | ||
a9913044 RD |
1630 | turbografx.map[2|3]= [HW,JOY] |
1631 | TurboGraFX parallel port interface | |
1632 | Format: | |
1633 | <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7> | |
1da177e4 LT |
1634 | See also Documentation/input/joystick-parport.txt |
1635 | ||
1636 | u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter | |
1637 | See header of drivers/scsi/u14-34f.c. | |
1638 | ||
1639 | uart401= [HW,OSS] | |
1640 | Format: <io>,<irq> | |
1641 | ||
1642 | uart6850= [HW,OSS] | |
1643 | Format: <io>,<irq> | |
1644 | ||
1da177e4 LT |
1645 | usbhid.mousepoll= |
1646 | [USBHID] The interval which mice are to be polled at. | |
a9913044 | 1647 | |
1da177e4 LT |
1648 | video= [FB] Frame buffer configuration |
1649 | See Documentation/fb/modedb.txt. | |
1650 | ||
1651 | vga= [BOOT,IA-32] Select a particular video mode | |
a9913044 RD |
1652 | See Documentation/i386/boot.txt and |
1653 | Documentation/svga.txt. | |
1da177e4 LT |
1654 | Use vga=ask for menu. |
1655 | This is actually a boot loader parameter; the value is | |
1656 | passed to the kernel using a special protocol. | |
1657 | ||
a9913044 | 1658 | vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact |
1da177e4 LT |
1659 | size of <nn>. This can be used to increase the |
1660 | minimum size (128MB on x86). It can also be used to | |
1661 | decrease the size and leave more room for directly | |
1662 | mapped kernel RAM. | |
1663 | ||
1664 | vmhalt= [KNL,S390] | |
1665 | ||
a9913044 RD |
1666 | vmpoff= [KNL,S390] |
1667 | ||
1da177e4 LT |
1668 | waveartist= [HW,OSS] |
1669 | Format: <io>,<irq>,<dma>,<dma2> | |
a9913044 | 1670 | |
1da177e4 LT |
1671 | wd33c93= [HW,SCSI] |
1672 | See header of drivers/scsi/wd33c93.c. | |
1673 | ||
1674 | wd7000= [HW,SCSI] | |
1675 | See header of drivers/scsi/wd7000.c. | |
1676 | ||
1677 | wdt= [WDT] Watchdog | |
1678 | See Documentation/watchdog/watchdog.txt. | |
1679 | ||
1680 | xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. | |
1681 | xd_geo= See header of drivers/block/xd.c. | |
1682 | ||
1683 | xirc2ps_cs= [NET,PCMCIA] | |
a9913044 RD |
1684 | Format: |
1685 | <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] | |
1da177e4 | 1686 | |
a62eaf15 AK |
1687 | norandmaps Don't use address space randomization |
1688 | Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space | |
1689 | ||
1da177e4 | 1690 | |
a9913044 | 1691 | ______________________________________________________________________ |
1da177e4 LT |
1692 | |
1693 | TODO: | |
1694 | ||
1695 | Add documentation for ALSA options. | |
1696 | Add more DRM drivers. |