Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | VERSION = 2 |
2 | PATCHLEVEL = 6 | |
2f4ba45a | 3 | SUBLEVEL = 14 |
741b2252 | 4 | EXTRAVERSION = |
5bbe6ab9 | 5 | NAME=Affluent Albatross |
1da177e4 LT |
6 | |
7 | # *DOCUMENTATION* | |
8 | # To see a list of typical targets execute "make help" | |
9 | # More info can be located in ./README | |
10 | # Comments in this file are targeted only to the developer, do not | |
11 | # expect to learn how to build the kernel reading this file. | |
12 | ||
13 | # Do not print "Entering directory ..." | |
14 | MAKEFLAGS += --no-print-directory | |
15 | ||
16 | # We are using a recursive build, so we need to do a little thinking | |
17 | # to get the ordering right. | |
18 | # | |
19 | # Most importantly: sub-Makefiles should only ever modify files in | |
20 | # their own directory. If in some directory we have a dependency on | |
21 | # a file in another dir (which doesn't happen often, but it's often | |
22 | # unavoidable when linking the built-in.o targets which finally | |
23 | # turn into vmlinux), we will call a sub make in that other dir, and | |
24 | # after that we are sure that everything which is in that other dir | |
25 | # is now up to date. | |
26 | # | |
27 | # The only cases where we need to modify files which have global | |
28 | # effects are thus separated out and done before the recursive | |
29 | # descending is started. They are now explicitly listed as the | |
30 | # prepare rule. | |
31 | ||
32 | # To put more focus on warnings, be less verbose as default | |
33 | # Use 'make V=1' to see the full commands | |
34 | ||
35 | ifdef V | |
36 | ifeq ("$(origin V)", "command line") | |
37 | KBUILD_VERBOSE = $(V) | |
38 | endif | |
39 | endif | |
40 | ifndef KBUILD_VERBOSE | |
41 | KBUILD_VERBOSE = 0 | |
42 | endif | |
43 | ||
44 | # Call sparse as part of compilation of C files | |
45 | # Use 'make C=1' to enable sparse checking | |
46 | ||
47 | ifdef C | |
48 | ifeq ("$(origin C)", "command line") | |
49 | KBUILD_CHECKSRC = $(C) | |
50 | endif | |
51 | endif | |
52 | ifndef KBUILD_CHECKSRC | |
53 | KBUILD_CHECKSRC = 0 | |
54 | endif | |
55 | ||
56 | # Use make M=dir to specify directory of external module to build | |
57 | # Old syntax make ... SUBDIRS=$PWD is still supported | |
58 | # Setting the environment variable KBUILD_EXTMOD take precedence | |
59 | ifdef SUBDIRS | |
60 | KBUILD_EXTMOD ?= $(SUBDIRS) | |
61 | endif | |
62 | ifdef M | |
63 | ifeq ("$(origin M)", "command line") | |
64 | KBUILD_EXTMOD := $(M) | |
65 | endif | |
66 | endif | |
67 | ||
68 | ||
69 | # kbuild supports saving output files in a separate directory. | |
70 | # To locate output files in a separate directory two syntaxes are supported. | |
71 | # In both cases the working directory must be the root of the kernel src. | |
72 | # 1) O= | |
73 | # Use "make O=dir/to/store/output/files/" | |
74 | # | |
75 | # 2) Set KBUILD_OUTPUT | |
76 | # Set the environment variable KBUILD_OUTPUT to point to the directory | |
77 | # where the output files shall be placed. | |
78 | # export KBUILD_OUTPUT=dir/to/store/output/files/ | |
79 | # make | |
80 | # | |
81 | # The O= assignment takes precedence over the KBUILD_OUTPUT environment | |
82 | # variable. | |
83 | ||
84 | ||
85 | # KBUILD_SRC is set on invocation of make in OBJ directory | |
86 | # KBUILD_SRC is not intended to be used by the regular user (for now) | |
87 | ifeq ($(KBUILD_SRC),) | |
88 | ||
89 | # OK, Make called in directory where kernel src resides | |
90 | # Do we want to locate output files in a separate directory? | |
91 | ifdef O | |
92 | ifeq ("$(origin O)", "command line") | |
93 | KBUILD_OUTPUT := $(O) | |
94 | endif | |
95 | endif | |
96 | ||
97 | # That's our default target when none is given on the command line | |
98 | .PHONY: _all | |
99 | _all: | |
100 | ||
101 | ifneq ($(KBUILD_OUTPUT),) | |
102 | # Invoke a second make in the output directory, passing relevant variables | |
103 | # check that the output directory actually exists | |
104 | saved-output := $(KBUILD_OUTPUT) | |
105 | KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) | |
106 | $(if $(KBUILD_OUTPUT),, \ | |
107 | $(error output directory "$(saved-output)" does not exist)) | |
108 | ||
109 | .PHONY: $(MAKECMDGOALS) | |
110 | ||
111 | $(filter-out _all,$(MAKECMDGOALS)) _all: | |
23a45e2c SR |
112 | $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ |
113 | KBUILD_SRC=$(CURDIR) \ | |
114 | KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@ | |
1da177e4 LT |
115 | |
116 | # Leave processing to above invocation of make | |
117 | skip-makefile := 1 | |
118 | endif # ifneq ($(KBUILD_OUTPUT),) | |
119 | endif # ifeq ($(KBUILD_SRC),) | |
120 | ||
121 | # We process the rest of the Makefile if this is the final invocation of make | |
122 | ifeq ($(skip-makefile),) | |
123 | ||
124 | # If building an external module we do not care about the all: rule | |
125 | # but instead _all depend on modules | |
126 | .PHONY: all | |
127 | ifeq ($(KBUILD_EXTMOD),) | |
128 | _all: all | |
129 | else | |
130 | _all: modules | |
131 | endif | |
132 | ||
133 | srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) | |
134 | TOPDIR := $(srctree) | |
135 | # FIXME - TOPDIR is obsolete, use srctree/objtree | |
136 | objtree := $(CURDIR) | |
137 | src := $(srctree) | |
138 | obj := $(objtree) | |
139 | ||
140 | VPATH := $(srctree) | |
141 | ||
142 | export srctree objtree VPATH TOPDIR | |
143 | ||
144 | nullstring := | |
145 | space := $(nullstring) # end of line | |
146 | ||
147 | # Take the contents of any files called localversion* and the config | |
148 | # variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be | |
149 | # careful not to include files twice if building in the source | |
150 | # directory. LOCALVERSION from the command line override all of this | |
151 | ||
152 | localver := $(objtree)/localversion* $(srctree)/localversion* | |
153 | localver := $(sort $(wildcard $(localver))) | |
154 | # skip backup files (containing '~') | |
155 | localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f))) | |
156 | ||
157 | LOCALVERSION = $(subst $(space),, \ | |
158 | $(shell cat /dev/null $(localver)) \ | |
159 | $(patsubst "%",%,$(CONFIG_LOCALVERSION))) | |
160 | ||
161 | KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION) | |
162 | ||
163 | # SUBARCH tells the usermode build what the underlying arch is. That is set | |
164 | # first, and if a usermode build is happening, the "ARCH=um" on the command | |
165 | # line overrides the setting of ARCH below. If a native build is happening, | |
166 | # then ARCH is assigned, getting whatever value it gets normally, and | |
167 | # SUBARCH is subsequently ignored. | |
168 | ||
169 | SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ | |
170 | -e s/arm.*/arm/ -e s/sa110/arm/ \ | |
171 | -e s/s390x/s390/ -e s/parisc64/parisc/ ) | |
172 | ||
173 | # Cross compiling and selecting different set of gcc/bin-utils | |
174 | # --------------------------------------------------------------------------- | |
175 | # | |
176 | # When performing cross compilation for other architectures ARCH shall be set | |
177 | # to the target architecture. (See arch/* for the possibilities). | |
178 | # ARCH can be set during invocation of make: | |
179 | # make ARCH=ia64 | |
180 | # Another way is to have ARCH set in the environment. | |
181 | # The default ARCH is the host where make is executed. | |
182 | ||
183 | # CROSS_COMPILE specify the prefix used for all executables used | |
184 | # during compilation. Only gcc and related bin-utils executables | |
185 | # are prefixed with $(CROSS_COMPILE). | |
186 | # CROSS_COMPILE can be set on the command line | |
187 | # make CROSS_COMPILE=ia64-linux- | |
188 | # Alternatively CROSS_COMPILE can be set in the environment. | |
189 | # Default value for CROSS_COMPILE is not to prefix executables | |
190 | # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile | |
191 | ||
192 | ARCH ?= $(SUBARCH) | |
193 | CROSS_COMPILE ?= | |
194 | ||
195 | # Architecture as present in compile.h | |
196 | UTS_MACHINE := $(ARCH) | |
197 | ||
198 | # SHELL used by kbuild | |
199 | CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ | |
200 | else if [ -x /bin/bash ]; then echo /bin/bash; \ | |
201 | else echo sh; fi ; fi) | |
202 | ||
203 | HOSTCC = gcc | |
204 | HOSTCXX = g++ | |
205 | HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer | |
206 | HOSTCXXFLAGS = -O2 | |
207 | ||
208 | # Decide whether to build built-in, modular, or both. | |
209 | # Normally, just do built-in. | |
210 | ||
211 | KBUILD_MODULES := | |
212 | KBUILD_BUILTIN := 1 | |
213 | ||
214 | # If we have only "make modules", don't compile built-in objects. | |
215 | # When we're building modules with modversions, we need to consider | |
216 | # the built-in objects during the descend as well, in order to | |
217 | # make sure the checksums are uptodate before we record them. | |
218 | ||
219 | ifeq ($(MAKECMDGOALS),modules) | |
220 | KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) | |
221 | endif | |
222 | ||
223 | # If we have "make <whatever> modules", compile modules | |
224 | # in addition to whatever we do anyway. | |
225 | # Just "make" or "make all" shall build modules as well | |
226 | ||
227 | ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) | |
228 | KBUILD_MODULES := 1 | |
229 | endif | |
230 | ||
231 | ifeq ($(MAKECMDGOALS),) | |
232 | KBUILD_MODULES := 1 | |
233 | endif | |
234 | ||
e579d351 | 235 | export KBUILD_MODULES KBUILD_BUILTIN |
1da177e4 LT |
236 | export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD |
237 | ||
238 | # Beautify output | |
239 | # --------------------------------------------------------------------------- | |
240 | # | |
241 | # Normally, we echo the whole command before executing it. By making | |
242 | # that echo $($(quiet)$(cmd)), we now have the possibility to set | |
243 | # $(quiet) to choose other forms of output instead, e.g. | |
244 | # | |
245 | # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ | |
246 | # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< | |
247 | # | |
248 | # If $(quiet) is empty, the whole command will be printed. | |
249 | # If it is set to "quiet_", only the short version will be printed. | |
250 | # If it is set to "silent_", nothing wil be printed at all, since | |
251 | # the variable $(silent_cmd_cc_o_c) doesn't exist. | |
252 | # | |
253 | # A simple variant is to prefix commands with $(Q) - that's usefull | |
254 | # for commands that shall be hidden in non-verbose mode. | |
255 | # | |
256 | # $(Q)ln $@ :< | |
257 | # | |
258 | # If KBUILD_VERBOSE equals 0 then the above command will be hidden. | |
259 | # If KBUILD_VERBOSE equals 1 then the above command is displayed. | |
260 | ||
261 | ifeq ($(KBUILD_VERBOSE),1) | |
262 | quiet = | |
263 | Q = | |
264 | else | |
265 | quiet=quiet_ | |
266 | Q = @ | |
267 | endif | |
268 | ||
269 | # If the user is running make -s (silent mode), suppress echoing of | |
270 | # commands | |
271 | ||
272 | ifneq ($(findstring s,$(MAKEFLAGS)),) | |
273 | quiet=silent_ | |
274 | endif | |
275 | ||
276 | export quiet Q KBUILD_VERBOSE | |
277 | ||
278 | ###### | |
279 | # cc support functions to be used (only) in arch/$(ARCH)/Makefile | |
280 | # See documentation in Documentation/kbuild/makefiles.txt | |
281 | ||
282 | # cc-option | |
ae67cd64 | 283 | # Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586) |
1da177e4 LT |
284 | |
285 | cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ | |
286 | > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) | |
287 | ||
288 | # For backward compatibility | |
289 | check_gcc = $(warning check_gcc is deprecated - use cc-option) \ | |
290 | $(call cc-option, $(1),$(2)) | |
291 | ||
292 | # cc-option-yn | |
293 | # Usage: flag := $(call cc-option-yn, -march=winchip-c6) | |
294 | cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ | |
295 | > /dev/null 2>&1; then echo "y"; else echo "n"; fi;) | |
296 | ||
297 | # cc-option-align | |
298 | # Prefix align with either -falign or -malign | |
299 | cc-option-align = $(subst -functions=0,,\ | |
300 | $(call cc-option,-falign-functions=0,-malign-functions=0)) | |
301 | ||
302 | # cc-version | |
303 | # Usage gcc-ver := $(call cc-version $(CC)) | |
304 | cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ | |
305 | $(if $(1), $(1), $(CC))) | |
306 | ||
307 | ||
308 | # Look for make include files relative to root of kernel src | |
309 | MAKEFLAGS += --include-dir=$(srctree) | |
310 | ||
8ec4b4ff | 311 | # We need some generic definitions |
2a691470 | 312 | include $(srctree)/scripts/Kbuild.include |
8ec4b4ff | 313 | |
1da177e4 LT |
314 | # For maximum performance (+ possibly random breakage, uncomment |
315 | # the following) | |
316 | ||
317 | #MAKEFLAGS += -rR | |
318 | ||
319 | # Make variables (CC, etc...) | |
320 | ||
321 | AS = $(CROSS_COMPILE)as | |
322 | LD = $(CROSS_COMPILE)ld | |
323 | CC = $(CROSS_COMPILE)gcc | |
324 | CPP = $(CC) -E | |
325 | AR = $(CROSS_COMPILE)ar | |
326 | NM = $(CROSS_COMPILE)nm | |
327 | STRIP = $(CROSS_COMPILE)strip | |
328 | OBJCOPY = $(CROSS_COMPILE)objcopy | |
329 | OBJDUMP = $(CROSS_COMPILE)objdump | |
330 | AWK = awk | |
331 | GENKSYMS = scripts/genksyms/genksyms | |
332 | DEPMOD = /sbin/depmod | |
333 | KALLSYMS = scripts/kallsyms | |
334 | PERL = perl | |
335 | CHECK = sparse | |
336 | ||
af4ca457 | 337 | CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF) |
1da177e4 LT |
338 | MODFLAGS = -DMODULE |
339 | CFLAGS_MODULE = $(MODFLAGS) | |
340 | AFLAGS_MODULE = $(MODFLAGS) | |
341 | LDFLAGS_MODULE = -r | |
342 | CFLAGS_KERNEL = | |
343 | AFLAGS_KERNEL = | |
344 | ||
345 | ||
346 | # Use LINUXINCLUDE when you must reference the include/ directory. | |
347 | # Needed to be compatible with the O= option | |
348 | LINUXINCLUDE := -Iinclude \ | |
2dd34b48 RK |
349 | $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \ |
350 | -imacros include/linux/autoconf.h | |
1da177e4 LT |
351 | |
352 | CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) | |
353 | ||
3c521e06 | 354 | CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ |
1da177e4 LT |
355 | -fno-strict-aliasing -fno-common \ |
356 | -ffreestanding | |
357 | AFLAGS := -D__ASSEMBLY__ | |
358 | ||
359 | export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \ | |
360 | ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ | |
361 | CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ | |
362 | HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS | |
363 | ||
364 | export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS | |
365 | export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE | |
366 | export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE | |
367 | ||
368 | # When compiling out-of-tree modules, put MODVERDIR in the module | |
369 | # tree rather than in the kernel tree. The kernel tree might | |
370 | # even be read-only. | |
371 | export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions | |
372 | ||
1da177e4 LT |
373 | # Files to ignore in find ... statements |
374 | ||
406119f4 TM |
375 | RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o |
376 | export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git | |
1da177e4 LT |
377 | |
378 | # =========================================================================== | |
379 | # Rules shared between *config targets and build targets | |
380 | ||
381 | # Basic helpers built in scripts/ | |
382 | .PHONY: scripts_basic | |
383 | scripts_basic: | |
384 | $(Q)$(MAKE) $(build)=scripts/basic | |
385 | ||
cd05e6bd JB |
386 | # To avoid any implicit rule to kick in, define an empty command. |
387 | scripts/basic/%: scripts_basic ; | |
388 | ||
1da177e4 LT |
389 | .PHONY: outputmakefile |
390 | # outputmakefile generate a Makefile to be placed in output directory, if | |
391 | # using a seperate output directory. This allows convinient use | |
392 | # of make in output directory | |
393 | outputmakefile: | |
394 | $(Q)if test ! $(srctree) -ef $(objtree); then \ | |
395 | $(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ | |
396 | $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \ | |
397 | > $(objtree)/Makefile; \ | |
398 | echo ' GEN $(objtree)/Makefile'; \ | |
399 | fi | |
400 | ||
401 | # To make sure we do not include .config for any of the *config targets | |
402 | # catch them early, and hand them over to scripts/kconfig/Makefile | |
403 | # It is allowed to specify more targets when calling make, including | |
404 | # mixing *config targets and build targets. | |
405 | # For example 'make oldconfig all'. | |
406 | # Detect when mixed targets is specified, and make a second invocation | |
407 | # of make so .config is not included in this case either (for *config). | |
408 | ||
409 | no-dot-config-targets := clean mrproper distclean \ | |
410 | cscope TAGS tags help %docs check% | |
411 | ||
412 | config-targets := 0 | |
413 | mixed-targets := 0 | |
414 | dot-config := 1 | |
415 | ||
416 | ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) | |
417 | ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) | |
418 | dot-config := 0 | |
419 | endif | |
420 | endif | |
421 | ||
422 | ifeq ($(KBUILD_EXTMOD),) | |
423 | ifneq ($(filter config %config,$(MAKECMDGOALS)),) | |
424 | config-targets := 1 | |
425 | ifneq ($(filter-out config %config,$(MAKECMDGOALS)),) | |
426 | mixed-targets := 1 | |
427 | endif | |
428 | endif | |
429 | endif | |
430 | ||
431 | ifeq ($(mixed-targets),1) | |
432 | # =========================================================================== | |
433 | # We're called with mixed targets (*config and build targets). | |
434 | # Handle them one by one. | |
435 | ||
436 | %:: FORCE | |
437 | $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ | |
438 | ||
439 | else | |
440 | ifeq ($(config-targets),1) | |
441 | # =========================================================================== | |
442 | # *config targets only - make sure prerequisites are updated, and descend | |
443 | # in scripts/kconfig to make the *config target | |
444 | ||
445 | # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. | |
446 | # KBUILD_DEFCONFIG may point out an alternative default configuration | |
447 | # used for 'make defconfig' | |
448 | include $(srctree)/arch/$(ARCH)/Makefile | |
449 | export KBUILD_DEFCONFIG | |
450 | ||
cd05e6bd JB |
451 | config %config: scripts_basic outputmakefile FORCE |
452 | $(Q)mkdir -p include/linux | |
1da177e4 LT |
453 | $(Q)$(MAKE) $(build)=scripts/kconfig $@ |
454 | ||
455 | else | |
456 | # =========================================================================== | |
457 | # Build targets only - this includes vmlinux, arch specific targets, clean | |
458 | # targets and others. In general all targets except *config targets. | |
459 | ||
460 | ifeq ($(KBUILD_EXTMOD),) | |
461 | # Additional helpers built in scripts/ | |
462 | # Carefully list dependencies so we do not try to build scripts twice | |
463 | # in parrallel | |
464 | .PHONY: scripts | |
465 | scripts: scripts_basic include/config/MARKER | |
466 | $(Q)$(MAKE) $(build)=$(@) | |
467 | ||
468 | scripts_basic: include/linux/autoconf.h | |
469 | ||
470 | # Objects we will link into vmlinux / subdirs we need to visit | |
471 | init-y := init/ | |
472 | drivers-y := drivers/ sound/ | |
473 | net-y := net/ | |
474 | libs-y := lib/ | |
475 | core-y := usr/ | |
476 | endif # KBUILD_EXTMOD | |
477 | ||
478 | ifeq ($(dot-config),1) | |
479 | # In this section, we need .config | |
480 | ||
481 | # Read in dependencies to all Kconfig* files, make sure to run | |
482 | # oldconfig if changes are detected. | |
483 | -include .config.cmd | |
484 | ||
485 | include .config | |
486 | ||
487 | # If .config needs to be updated, it will be done via the dependency | |
488 | # that autoconf has on .config. | |
489 | # To avoid any implicit rule to kick in, define an empty command | |
490 | .config: ; | |
491 | ||
492 | # If .config is newer than include/linux/autoconf.h, someone tinkered | |
493 | # with it and forgot to run make oldconfig | |
494 | include/linux/autoconf.h: .config | |
5011cdd0 | 495 | $(Q)mkdir -p include/linux |
1da177e4 LT |
496 | $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig |
497 | else | |
498 | # Dummy target needed, because used as prerequisite | |
499 | include/linux/autoconf.h: ; | |
500 | endif | |
501 | ||
502 | # The all: target is the default when no target is given on the | |
503 | # command line. | |
504 | # This allow a user to issue only 'make' to build a kernel including modules | |
505 | # Defaults vmlinux but it is usually overriden in the arch makefile | |
506 | all: vmlinux | |
507 | ||
508 | ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE | |
509 | CFLAGS += -Os | |
510 | else | |
511 | CFLAGS += -O2 | |
512 | endif | |
513 | ||
514 | #Add align options if CONFIG_CC_* is not equal to 0 | |
515 | add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1))) | |
516 | CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions) | |
517 | CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels) | |
518 | CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops) | |
519 | CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps) | |
520 | ||
521 | ifdef CONFIG_FRAME_POINTER | |
0030cbf0 | 522 | CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,) |
1da177e4 LT |
523 | else |
524 | CFLAGS += -fomit-frame-pointer | |
525 | endif | |
526 | ||
527 | ifdef CONFIG_DEBUG_INFO | |
528 | CFLAGS += -g | |
529 | endif | |
530 | ||
531 | include $(srctree)/arch/$(ARCH)/Makefile | |
532 | ||
e8e69931 | 533 | # arch Makefile may override CC so keep this after arch Makefile is included |
e8f5bdb0 | 534 | NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) |
e8e69931 SR |
535 | CHECKFLAGS += $(NOSTDINC_FLAGS) |
536 | ||
1da177e4 LT |
537 | # warn about C99 declaration after statement |
538 | CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) | |
539 | ||
540 | # disable pointer signedness warnings in gcc 4.0 | |
541 | CFLAGS += $(call cc-option,-Wno-pointer-sign,) | |
542 | ||
543 | # Default kernel image to build when no specific target is given. | |
544 | # KBUILD_IMAGE may be overruled on the commandline or | |
545 | # set in the environment | |
546 | # Also any assignments in arch/$(ARCH)/Makefile take precedence over | |
547 | # this default value | |
548 | export KBUILD_IMAGE ?= vmlinux | |
549 | ||
550 | # | |
551 | # INSTALL_PATH specifies where to place the updated kernel and system map | |
552 | # images. Default is /boot, but you can set it to other values | |
553 | export INSTALL_PATH ?= /boot | |
554 | ||
aaebf433 RA |
555 | # If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests |
556 | # and try to determine if the current source tree is a release tree, of any sort, | |
557 | # or if is a pure development tree. | |
558 | # | |
559 | # A 'release tree' is any tree with a git TAG associated | |
560 | # with it. The primary goal of this is to make it safe for a native | |
561 | # git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to | |
562 | # continue developing against the current Linus tree, without having the Linus | |
563 | # tree overwrite the 2.6.9 tree when installed. | |
564 | # | |
565 | # Currently, only git is supported. | |
566 | # Other SCMs can edit scripts/setlocalversion and add the appropriate | |
567 | # checks as needed. | |
568 | ||
569 | ||
570 | ifdef CONFIG_LOCALVERSION_AUTO | |
571 | localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree)) | |
572 | LOCALVERSION := $(LOCALVERSION)$(localversion-auto) | |
573 | endif | |
574 | ||
1da177e4 LT |
575 | # |
576 | # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory | |
577 | # relocations required by build roots. This is not defined in the | |
578 | # makefile but the arguement can be passed to make if needed. | |
579 | # | |
580 | ||
581 | MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) | |
582 | export MODLIB | |
583 | ||
584 | ||
585 | ifeq ($(KBUILD_EXTMOD),) | |
586 | core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ | |
587 | ||
588 | vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ | |
589 | $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ | |
590 | $(net-y) $(net-m) $(libs-y) $(libs-m))) | |
591 | ||
592 | vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ | |
593 | $(init-n) $(init-) \ | |
594 | $(core-n) $(core-) $(drivers-n) $(drivers-) \ | |
595 | $(net-n) $(net-) $(libs-n) $(libs-)))) | |
596 | ||
597 | init-y := $(patsubst %/, %/built-in.o, $(init-y)) | |
598 | core-y := $(patsubst %/, %/built-in.o, $(core-y)) | |
599 | drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) | |
600 | net-y := $(patsubst %/, %/built-in.o, $(net-y)) | |
601 | libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) | |
602 | libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) | |
603 | libs-y := $(libs-y1) $(libs-y2) | |
604 | ||
605 | # Build vmlinux | |
606 | # --------------------------------------------------------------------------- | |
607 | # vmlinux is build from the objects selected by $(vmlinux-init) and | |
608 | # $(vmlinux-main). Most are built-in.o files from top-level directories | |
609 | # in the kernel tree, others are specified in arch/$(ARCH)Makefile. | |
610 | # Ordering when linking is important, and $(vmlinux-init) must be first. | |
611 | # | |
612 | # vmlinux | |
613 | # ^ | |
614 | # | | |
615 | # +-< $(vmlinux-init) | |
616 | # | +--< init/version.o + more | |
617 | # | | |
618 | # +--< $(vmlinux-main) | |
619 | # | +--< driver/built-in.o mm/built-in.o + more | |
620 | # | | |
621 | # +-< kallsyms.o (see description in CONFIG_KALLSYMS section) | |
622 | # | |
623 | # vmlinux version (uname -v) cannot be updated during normal | |
624 | # descending-into-subdirs phase since we do not yet know if we need to | |
625 | # update vmlinux. | |
626 | # Therefore this step is delayed until just before final link of vmlinux - | |
627 | # except in the kallsyms case where it is done just before adding the | |
628 | # symbols to the kernel. | |
629 | # | |
630 | # System.map is generated to document addresses of all kernel symbols | |
631 | ||
632 | vmlinux-init := $(head-y) $(init-y) | |
633 | vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) | |
634 | vmlinux-all := $(vmlinux-init) $(vmlinux-main) | |
635 | vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds | |
636 | ||
637 | # Rule to link vmlinux - also used during CONFIG_KALLSYMS | |
638 | # May be overridden by arch/$(ARCH)/Makefile | |
639 | quiet_cmd_vmlinux__ ?= LD $@ | |
640 | cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \ | |
641 | -T $(vmlinux-lds) $(vmlinux-init) \ | |
642 | --start-group $(vmlinux-main) --end-group \ | |
643 | $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) | |
644 | ||
645 | # Generate new vmlinux version | |
646 | quiet_cmd_vmlinux_version = GEN .version | |
647 | cmd_vmlinux_version = set -e; \ | |
4e25d8bb JB |
648 | if [ ! -r .version ]; then \ |
649 | rm -f .version; \ | |
650 | echo 1 >.version; \ | |
651 | else \ | |
652 | mv .version .old_version; \ | |
653 | expr 0$$(cat .old_version) + 1 >.version; \ | |
654 | fi; \ | |
1da177e4 LT |
655 | $(MAKE) $(build)=init |
656 | ||
657 | # Generate System.map | |
658 | quiet_cmd_sysmap = SYSMAP | |
659 | cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap | |
660 | ||
661 | # Link of vmlinux | |
662 | # If CONFIG_KALLSYMS is set .version is already updated | |
663 | # Generate System.map and verify that the content is consistent | |
39ca371c MR |
664 | # Use + in front of the vmlinux_version rule to silent warning with make -j2 |
665 | # First command is ':' to allow us to use + in front of the rule | |
1da177e4 | 666 | define rule_vmlinux__ |
39ca371c | 667 | : |
1da177e4 LT |
668 | $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) |
669 | ||
670 | $(call cmd,vmlinux__) | |
671 | $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd | |
672 | ||
673 | $(Q)$(if $($(quiet)cmd_sysmap), \ | |
674 | echo ' $($(quiet)cmd_sysmap) System.map' &&) \ | |
675 | $(cmd_sysmap) $@ System.map; \ | |
676 | if [ $$? -ne 0 ]; then \ | |
677 | rm -f $@; \ | |
678 | /bin/false; \ | |
679 | fi; | |
680 | $(verify_kallsyms) | |
681 | endef | |
682 | ||
683 | ||
684 | ifdef CONFIG_KALLSYMS | |
685 | # Generate section listing all symbols and add it into vmlinux $(kallsyms.o) | |
686 | # It's a three stage process: | |
687 | # o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is | |
688 | # empty | |
689 | # Running kallsyms on that gives us .tmp_kallsyms1.o with | |
690 | # the right size - vmlinux version (uname -v) is updated during this step | |
691 | # o .tmp_vmlinux2 now has a __kallsyms section of the right size, | |
692 | # but due to the added section, some addresses have shifted. | |
693 | # From here, we generate a correct .tmp_kallsyms2.o | |
694 | # o The correct .tmp_kallsyms2.o is linked into the final vmlinux. | |
695 | # o Verify that the System.map from vmlinux matches the map from | |
696 | # .tmp_vmlinux2, just in case we did not generate kallsyms correctly. | |
697 | # o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using | |
698 | # .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a | |
699 | # temporary bypass to allow the kernel to be built while the | |
700 | # maintainers work out what went wrong with kallsyms. | |
701 | ||
702 | ifdef CONFIG_KALLSYMS_EXTRA_PASS | |
703 | last_kallsyms := 3 | |
704 | else | |
705 | last_kallsyms := 2 | |
706 | endif | |
707 | ||
708 | kallsyms.o := .tmp_kallsyms$(last_kallsyms).o | |
709 | ||
710 | define verify_kallsyms | |
711 | $(Q)$(if $($(quiet)cmd_sysmap), \ | |
712 | echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ | |
713 | $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map | |
714 | $(Q)cmp -s System.map .tmp_System.map || \ | |
715 | (echo Inconsistent kallsyms data; \ | |
716 | echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ | |
717 | rm .tmp_kallsyms* ; /bin/false ) | |
718 | endef | |
719 | ||
720 | # Update vmlinux version before link | |
721 | # Use + in front of this rule to silent warning about make -j1 | |
72ba47c1 | 722 | # First command is ':' to allow us to use + in front of this rule |
1da177e4 LT |
723 | cmd_ksym_ld = $(cmd_vmlinux__) |
724 | define rule_ksym_ld | |
72ba47c1 | 725 | : |
1da177e4 LT |
726 | +$(call cmd,vmlinux_version) |
727 | $(call cmd,vmlinux__) | |
728 | $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd | |
729 | endef | |
730 | ||
731 | # Generate .S file with all kernel symbols | |
732 | quiet_cmd_kallsyms = KSYM $@ | |
733 | cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ | |
734 | $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ | |
735 | ||
736 | .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE | |
737 | $(call if_changed_dep,as_o_S) | |
738 | ||
739 | .tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) | |
740 | $(call cmd,kallsyms) | |
741 | ||
742 | # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version | |
743 | .tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE | |
744 | $(call if_changed_rule,ksym_ld) | |
745 | ||
746 | .tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE | |
747 | $(call if_changed,vmlinux__) | |
748 | ||
749 | .tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE | |
750 | $(call if_changed,vmlinux__) | |
751 | ||
752 | # Needs to visit scripts/ before $(KALLSYMS) can be used. | |
753 | $(KALLSYMS): scripts ; | |
754 | ||
33bc25ea SR |
755 | # Generate some data for debugging strange kallsyms problems |
756 | debug_kallsyms: .tmp_map$(last_kallsyms) | |
757 | ||
758 | .tmp_map%: .tmp_vmlinux% FORCE | |
759 | ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@ | |
760 | ||
761 | .tmp_map3: .tmp_map2 | |
762 | ||
763 | .tmp_map2: .tmp_map1 | |
764 | ||
1da177e4 LT |
765 | endif # ifdef CONFIG_KALLSYMS |
766 | ||
767 | # vmlinux image - including updated kernel symbols | |
768 | vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE | |
769 | $(call if_changed_rule,vmlinux__) | |
4e25d8bb | 770 | $(Q)rm -f .old_version |
1da177e4 LT |
771 | |
772 | # The actual objects are generated when descending, | |
773 | # make sure no implicit rule kicks in | |
774 | $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; | |
775 | ||
776 | # Handle descending into subdirectories listed in $(vmlinux-dirs) | |
777 | # Preset locale variables to speed up the build process. Limit locale | |
778 | # tweaks to this spot to avoid wrong language settings when running | |
779 | # make menuconfig etc. | |
780 | # Error messages still appears in the original language | |
781 | ||
782 | .PHONY: $(vmlinux-dirs) | |
5bb78269 | 783 | $(vmlinux-dirs): prepare scripts |
1da177e4 LT |
784 | $(Q)$(MAKE) $(build)=$@ |
785 | ||
786 | # Things we need to do before we recursively start building the kernel | |
5bb78269 SR |
787 | # or the modules are listed in "prepare". |
788 | # A multi level approach is used. prepareN is processed before prepareN-1. | |
789 | # archprepare is used in arch Makefiles and when processed asm symlink, | |
790 | # version.h and scripts_basic is processed / created. | |
1da177e4 | 791 | |
5bb78269 SR |
792 | # Listed in dependency order |
793 | .PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3 | |
794 | ||
795 | # prepare-all is deprecated, use prepare as valid replacement | |
796 | .PHONY: prepare-all | |
1da177e4 | 797 | |
86feeaa8 | 798 | # prepare3 is used to check if we are building in a separate output directory, |
1da177e4 LT |
799 | # and if so do: |
800 | # 1) Check that make has not been executed in the kernel src $(srctree) | |
801 | # 2) Create the include2 directory, used for the second asm symlink | |
802 | ||
86feeaa8 | 803 | prepare3: |
1da177e4 LT |
804 | ifneq ($(KBUILD_SRC),) |
805 | @echo ' Using $(srctree) as source for kernel' | |
d80e2246 | 806 | $(Q)if [ -f $(srctree)/.config ]; then \ |
1da177e4 LT |
807 | echo " $(srctree) is not clean, please run 'make mrproper'";\ |
808 | echo " in the '$(srctree)' directory.";\ | |
809 | /bin/false; \ | |
810 | fi; | |
811 | $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; | |
812 | $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm | |
813 | endif | |
814 | ||
86feeaa8 SR |
815 | # prepare2 creates a makefile if using a separate output directory |
816 | prepare2: prepare3 outputmakefile | |
1da177e4 | 817 | |
86feeaa8 | 818 | prepare1: prepare2 include/linux/version.h include/asm \ |
d80e2246 | 819 | include/config/MARKER |
1da177e4 LT |
820 | ifneq ($(KBUILD_MODULES),) |
821 | $(Q)rm -rf $(MODVERDIR) | |
822 | $(Q)mkdir -p $(MODVERDIR) | |
823 | endif | |
824 | ||
5bb78269 SR |
825 | archprepare: prepare1 scripts_basic |
826 | ||
827 | prepare0: archprepare FORCE | |
8d36a623 | 828 | $(Q)$(MAKE) $(build)=. |
86feeaa8 | 829 | |
1da177e4 | 830 | # All the preparing.. |
5bb78269 | 831 | prepare prepare-all: prepare0 |
1da177e4 LT |
832 | |
833 | # Leave this as default for preprocessing vmlinux.lds.S, which is now | |
834 | # done in arch/$(ARCH)/kernel/Makefile | |
835 | ||
836 | export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) | |
837 | ||
838 | # Single targets | |
839 | # --------------------------------------------------------------------------- | |
840 | ||
841 | %.s: %.c scripts FORCE | |
842 | $(Q)$(MAKE) $(build)=$(@D) $@ | |
843 | %.i: %.c scripts FORCE | |
844 | $(Q)$(MAKE) $(build)=$(@D) $@ | |
845 | %.o: %.c scripts FORCE | |
846 | $(Q)$(MAKE) $(build)=$(@D) $@ | |
155ad605 SR |
847 | %.ko: scripts FORCE |
848 | $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o) | |
849 | $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost | |
1da177e4 LT |
850 | %/: scripts prepare FORCE |
851 | $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) | |
852 | %.lst: %.c scripts FORCE | |
853 | $(Q)$(MAKE) $(build)=$(@D) $@ | |
854 | %.s: %.S scripts FORCE | |
855 | $(Q)$(MAKE) $(build)=$(@D) $@ | |
856 | %.o: %.S scripts FORCE | |
857 | $(Q)$(MAKE) $(build)=$(@D) $@ | |
858 | ||
859 | # FIXME: The asm symlink changes when $(ARCH) changes. That's | |
860 | # hard to detect, but I suppose "make mrproper" is a good idea | |
861 | # before switching between archs anyway. | |
862 | ||
863 | include/asm: | |
864 | @echo ' SYMLINK $@ -> include/asm-$(ARCH)' | |
865 | $(Q)if [ ! -d include ]; then mkdir -p include; fi; | |
866 | @ln -fsn asm-$(ARCH) $@ | |
867 | ||
868 | # Split autoconf.h into include/linux/config/* | |
869 | ||
cd05e6bd | 870 | include/config/MARKER: scripts/basic/split-include include/linux/autoconf.h |
1da177e4 LT |
871 | @echo ' SPLIT include/linux/autoconf.h -> include/config/*' |
872 | @scripts/basic/split-include include/linux/autoconf.h include/config | |
873 | @touch $@ | |
874 | ||
875 | # Generate some files | |
876 | # --------------------------------------------------------------------------- | |
877 | ||
878 | # KERNELRELEASE can change from a few different places, meaning version.h | |
879 | # needs to be updated, so this check is forced on all builds | |
880 | ||
881 | uts_len := 64 | |
882 | ||
883 | define filechk_version.h | |
884 | if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ | |
885 | echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ | |
886 | exit 1; \ | |
887 | fi; \ | |
888 | (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ | |
889 | echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ | |
890 | echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ | |
891 | ) | |
892 | endef | |
893 | ||
894 | include/linux/version.h: $(srctree)/Makefile FORCE | |
895 | $(call filechk,version.h) | |
896 | ||
897 | # --------------------------------------------------------------------------- | |
898 | ||
899 | .PHONY: depend dep | |
900 | depend dep: | |
901 | @echo '*** Warning: make $@ is unnecessary now.' | |
902 | ||
903 | # --------------------------------------------------------------------------- | |
904 | # Modules | |
905 | ||
906 | ifdef CONFIG_MODULES | |
907 | ||
908 | # By default, build modules as well | |
909 | ||
910 | all: modules | |
911 | ||
912 | # Build modules | |
913 | ||
914 | .PHONY: modules | |
915 | modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) | |
916 | @echo ' Building modules, stage 2.'; | |
917 | $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost | |
918 | ||
919 | ||
920 | # Target to prepare building external modules | |
921 | .PHONY: modules_prepare | |
5bb78269 | 922 | modules_prepare: prepare scripts |
1da177e4 LT |
923 | |
924 | # Target to install modules | |
925 | .PHONY: modules_install | |
926 | modules_install: _modinst_ _modinst_post | |
927 | ||
928 | .PHONY: _modinst_ | |
929 | _modinst_: | |
ce454d4d | 930 | @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ |
1da177e4 LT |
931 | echo "Warning: you may need to install module-init-tools"; \ |
932 | echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ | |
933 | sleep 1; \ | |
934 | fi | |
935 | @rm -rf $(MODLIB)/kernel | |
936 | @rm -f $(MODLIB)/source | |
937 | @mkdir -p $(MODLIB)/kernel | |
938 | @ln -s $(srctree) $(MODLIB)/source | |
939 | @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ | |
940 | rm -f $(MODLIB)/build ; \ | |
941 | ln -s $(objtree) $(MODLIB)/build ; \ | |
942 | fi | |
943 | $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst | |
944 | ||
945 | # If System.map exists, run depmod. This deliberately does not have a | |
946 | # dependency on System.map since that would run the dependency tree on | |
947 | # vmlinux. This depmod is only for convenience to give the initial | |
948 | # boot a modules.dep even before / is mounted read-write. However the | |
949 | # boot script depmod is the master version. | |
950 | ifeq "$(strip $(INSTALL_MOD_PATH))" "" | |
951 | depmod_opts := | |
952 | else | |
953 | depmod_opts := -b $(INSTALL_MOD_PATH) -r | |
954 | endif | |
955 | .PHONY: _modinst_post | |
956 | _modinst_post: _modinst_ | |
957 | if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi | |
958 | ||
959 | else # CONFIG_MODULES | |
960 | ||
961 | # Modules not configured | |
962 | # --------------------------------------------------------------------------- | |
963 | ||
964 | modules modules_install: FORCE | |
965 | @echo | |
966 | @echo "The present kernel configuration has modules disabled." | |
967 | @echo "Type 'make config' and enable loadable module support." | |
968 | @echo "Then build a kernel with module support enabled." | |
969 | @echo | |
970 | @exit 1 | |
971 | ||
972 | endif # CONFIG_MODULES | |
973 | ||
1da177e4 LT |
974 | ### |
975 | # Cleaning is done on three levels. | |
976 | # make clean Delete most generated files | |
977 | # Leave enough to build external modules | |
978 | # make mrproper Delete the current configuration, and all generated files | |
979 | # make distclean Remove editor backup files, patch leftover files and the like | |
980 | ||
981 | # Directories & files removed with 'make clean' | |
982 | CLEAN_DIRS += $(MODVERDIR) | |
983 | CLEAN_FILES += vmlinux System.map \ | |
984 | .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map | |
985 | ||
986 | # Directories & files removed with 'make mrproper' | |
987 | MRPROPER_DIRS += include/config include2 | |
988 | MRPROPER_FILES += .config .config.old include/asm .version \ | |
989 | include/linux/autoconf.h include/linux/version.h \ | |
990 | Module.symvers tags TAGS cscope* | |
991 | ||
992 | # clean - Delete most, but leave enough to build external modules | |
993 | # | |
994 | clean: rm-dirs := $(CLEAN_DIRS) | |
995 | clean: rm-files := $(CLEAN_FILES) | |
86feeaa8 | 996 | clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs)) |
1da177e4 LT |
997 | |
998 | .PHONY: $(clean-dirs) clean archclean | |
999 | $(clean-dirs): | |
1000 | $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) | |
1001 | ||
1002 | clean: archclean $(clean-dirs) | |
1003 | $(call cmd,rmdirs) | |
1004 | $(call cmd,rmfiles) | |
1005 | @find . $(RCS_FIND_IGNORE) \ | |
1006 | \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ | |
1007 | -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ | |
1008 | -type f -print | xargs rm -f | |
1009 | ||
1010 | # mrproper - Delete all generated files, including .config | |
1011 | # | |
1012 | mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) | |
1013 | mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) | |
1014 | mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts) | |
1015 | ||
1016 | .PHONY: $(mrproper-dirs) mrproper archmrproper | |
1017 | $(mrproper-dirs): | |
1018 | $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) | |
1019 | ||
1020 | mrproper: clean archmrproper $(mrproper-dirs) | |
1021 | $(call cmd,rmdirs) | |
1022 | $(call cmd,rmfiles) | |
1023 | ||
1024 | # distclean | |
1025 | # | |
1026 | .PHONY: distclean | |
1027 | ||
1028 | distclean: mrproper | |
1029 | @find $(srctree) $(RCS_FIND_IGNORE) \ | |
1030 | \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ | |
1031 | -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ | |
1032 | -o -name '.*.rej' -o -size 0 \ | |
1033 | -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ | |
1034 | -type f -print | xargs rm -f | |
1035 | ||
1036 | ||
1037 | # Packaging of the kernel to various formats | |
1038 | # --------------------------------------------------------------------------- | |
1039 | # rpm target kept for backward compatibility | |
1040 | package-dir := $(srctree)/scripts/package | |
1041 | ||
1042 | .PHONY: %-pkg rpm | |
1043 | ||
1044 | %pkg: FORCE | |
1045 | $(Q)$(MAKE) -f $(package-dir)/Makefile $@ | |
1046 | rpm: FORCE | |
1047 | $(Q)$(MAKE) -f $(package-dir)/Makefile $@ | |
1048 | ||
1049 | ||
1050 | # Brief documentation of the typical targets used | |
1051 | # --------------------------------------------------------------------------- | |
1052 | ||
1053 | boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig) | |
1054 | boards := $(notdir $(boards)) | |
1055 | ||
1056 | help: | |
1057 | @echo 'Cleaning targets:' | |
1058 | @echo ' clean - remove most generated files but keep the config' | |
1059 | @echo ' mrproper - remove all generated files + config + various backup files' | |
1060 | @echo '' | |
1061 | @echo 'Configuration targets:' | |
1062 | @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help | |
1063 | @echo '' | |
1064 | @echo 'Other generic targets:' | |
1065 | @echo ' all - Build all targets marked with [*]' | |
1066 | @echo '* vmlinux - Build the bare kernel' | |
1067 | @echo '* modules - Build all modules' | |
1068 | @echo ' modules_install - Install all modules' | |
1069 | @echo ' dir/ - Build all files in dir and below' | |
1070 | @echo ' dir/file.[ois] - Build specified target only' | |
155ad605 | 1071 | @echo ' dir/file.ko - Build module including final link' |
1da177e4 LT |
1072 | @echo ' rpm - Build a kernel as an RPM package' |
1073 | @echo ' tags/TAGS - Generate tags file for editors' | |
1074 | @echo ' cscope - Generate cscope index' | |
6d128842 | 1075 | @echo ' kernelrelease - Output the release version string' |
1da177e4 LT |
1076 | @echo '' |
1077 | @echo 'Static analysers' | |
1078 | @echo ' buildcheck - List dangling references to vmlinux discarded sections' | |
1079 | @echo ' and init sections from non-init sections' | |
1080 | @echo ' checkstack - Generate a list of stack hogs' | |
1081 | @echo ' namespacecheck - Name space analysis on compiled kernel' | |
1082 | @echo '' | |
1083 | @echo 'Kernel packaging:' | |
1084 | @$(MAKE) -f $(package-dir)/Makefile help | |
1085 | @echo '' | |
1086 | @echo 'Documentation targets:' | |
1087 | @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp | |
1088 | @echo '' | |
1089 | @echo 'Architecture specific targets ($(ARCH)):' | |
1090 | @$(if $(archhelp),$(archhelp),\ | |
1091 | echo ' No architecture specific help defined for $(ARCH)') | |
1092 | @echo '' | |
1093 | @$(if $(boards), \ | |
1094 | $(foreach b, $(boards), \ | |
1095 | printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ | |
1096 | echo '') | |
1097 | ||
1098 | @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' | |
1099 | @echo ' make O=dir [targets] Locate all output files in "dir", including .config' | |
1100 | @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)' | |
1101 | @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)' | |
1102 | @echo '' | |
1103 | @echo 'Execute "make" or "make all" to build all targets marked with [*] ' | |
1104 | @echo 'For further info see the ./README file' | |
1105 | ||
1106 | ||
1107 | # Documentation targets | |
1108 | # --------------------------------------------------------------------------- | |
1109 | %docs: scripts_basic FORCE | |
1110 | $(Q)$(MAKE) $(build)=Documentation/DocBook $@ | |
1111 | ||
1112 | else # KBUILD_EXTMOD | |
1113 | ||
1114 | ### | |
1115 | # External module support. | |
1116 | # When building external modules the kernel used as basis is considered | |
1117 | # read-only, and no consistency checks are made and the make | |
1118 | # system is not used on the basis kernel. If updates are required | |
1119 | # in the basis kernel ordinary make commands (without M=...) must | |
1120 | # be used. | |
1121 | # | |
1122 | # The following are the only valid targets when building external | |
1123 | # modules. | |
1124 | # make M=dir clean Delete all automatically generated files | |
1125 | # make M=dir modules Make all modules in specified dir | |
1126 | # make M=dir Same as 'make M=dir modules' | |
1127 | # make M=dir modules_install | |
1128 | # Install the modules build in the module directory | |
1129 | # Assumes install directory is already created | |
1130 | ||
1131 | # We are always building modules | |
1132 | KBUILD_MODULES := 1 | |
1133 | .PHONY: crmodverdir | |
1134 | crmodverdir: | |
1135 | $(Q)mkdir -p $(MODVERDIR) | |
1136 | ||
1137 | .PHONY: $(objtree)/Module.symvers | |
1138 | $(objtree)/Module.symvers: | |
1139 | @test -e $(objtree)/Module.symvers || ( \ | |
1140 | echo; \ | |
1141 | echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \ | |
1142 | echo " is missing; modules will have no dependencies and modversions."; \ | |
1143 | echo ) | |
1144 | ||
1145 | module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) | |
1146 | .PHONY: $(module-dirs) modules | |
1147 | $(module-dirs): crmodverdir $(objtree)/Module.symvers | |
1148 | $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) | |
1149 | ||
1150 | modules: $(module-dirs) | |
1151 | @echo ' Building modules, stage 2.'; | |
1152 | $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost | |
1153 | ||
1154 | .PHONY: modules_install | |
1155 | modules_install: | |
1156 | $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst | |
1157 | ||
1158 | clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) | |
1159 | ||
1160 | .PHONY: $(clean-dirs) clean | |
1161 | $(clean-dirs): | |
1162 | $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) | |
1163 | ||
1164 | clean: rm-dirs := $(MODVERDIR) | |
1165 | clean: $(clean-dirs) | |
1166 | $(call cmd,rmdirs) | |
1167 | @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \ | |
1168 | \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ | |
1169 | -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ | |
1170 | -type f -print | xargs rm -f | |
1171 | ||
1172 | help: | |
1173 | @echo ' Building external modules.' | |
1174 | @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' | |
1175 | @echo '' | |
1176 | @echo ' modules - default target, build the module(s)' | |
1177 | @echo ' modules_install - install the module' | |
1178 | @echo ' clean - remove generated files in module directory only' | |
1179 | @echo '' | |
1180 | endif # KBUILD_EXTMOD | |
1181 | ||
1182 | # Generate tags for editors | |
1183 | # --------------------------------------------------------------------------- | |
1184 | ||
1185 | #We want __srctree to totally vanish out when KBUILD_OUTPUT is not set | |
1186 | #(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. | |
1187 | #Adding $(srctree) adds about 20M on i386 to the size of the output file! | |
1188 | ||
f182ae62 | 1189 | ifeq ($(src),$(obj)) |
1da177e4 LT |
1190 | __srctree = |
1191 | else | |
1192 | __srctree = $(srctree)/ | |
1193 | endif | |
1194 | ||
a0674e88 IC |
1195 | ALLSOURCE_ARCHS := $(ARCH) |
1196 | ||
1da177e4 LT |
1197 | define all-sources |
1198 | ( find $(__srctree) $(RCS_FIND_IGNORE) \ | |
1199 | \( -name include -o -name arch \) -prune -o \ | |
1200 | -name '*.[chS]' -print; \ | |
a0674e88 IC |
1201 | for ARCH in $(ALLSOURCE_ARCHS) ; do \ |
1202 | find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \ | |
1203 | -name '*.[chS]' -print; \ | |
1204 | done ; \ | |
1da177e4 LT |
1205 | find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \ |
1206 | -name '*.[chS]' -print; \ | |
1207 | find $(__srctree)include $(RCS_FIND_IGNORE) \ | |
1208 | \( -name config -o -name 'asm-*' \) -prune \ | |
1209 | -o -name '*.[chS]' -print; \ | |
a0674e88 IC |
1210 | for ARCH in $(ALLSOURCE_ARCHS) ; do \ |
1211 | find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \ | |
1212 | -name '*.[chS]' -print; \ | |
1213 | done ; \ | |
1da177e4 LT |
1214 | find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ |
1215 | -name '*.[chS]' -print ) | |
1216 | endef | |
1217 | ||
1218 | quiet_cmd_cscope-file = FILELST cscope.files | |
acbef459 | 1219 | cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files |
1da177e4 LT |
1220 | |
1221 | quiet_cmd_cscope = MAKE cscope.out | |
acbef459 | 1222 | cmd_cscope = cscope -b |
1da177e4 LT |
1223 | |
1224 | cscope: FORCE | |
1225 | $(call cmd,cscope-file) | |
1226 | $(call cmd,cscope) | |
1227 | ||
1228 | quiet_cmd_TAGS = MAKE $@ | |
66d609ec SR |
1229 | define cmd_TAGS |
1230 | rm -f $@; \ | |
1231 | ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \ | |
1232 | $(all-sources) | xargs etags $$ETAGSF -a | |
1233 | endef | |
1234 | ||
1235 | TAGS: FORCE | |
1236 | $(call cmd,TAGS) | |
1da177e4 | 1237 | |
1da177e4 LT |
1238 | |
1239 | quiet_cmd_tags = MAKE $@ | |
1240 | define cmd_tags | |
1241 | rm -f $@; \ | |
efcd5e3a EG |
1242 | CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \ |
1243 | $(all-sources) | xargs ctags $$CTAGSF -a | |
1da177e4 LT |
1244 | endef |
1245 | ||
1da177e4 LT |
1246 | tags: FORCE |
1247 | $(call cmd,tags) | |
1248 | ||
1249 | ||
1250 | # Scripts to check various things for consistency | |
1251 | # --------------------------------------------------------------------------- | |
1252 | ||
1da177e4 LT |
1253 | includecheck: |
1254 | find * $(RCS_FIND_IGNORE) \ | |
1255 | -name '*.[hcS]' -type f -print | sort \ | |
1256 | | xargs $(PERL) -w scripts/checkincludes.pl | |
1257 | ||
1258 | versioncheck: | |
1259 | find * $(RCS_FIND_IGNORE) \ | |
1260 | -name '*.[hcS]' -type f -print | sort \ | |
1261 | | xargs $(PERL) -w scripts/checkversion.pl | |
1262 | ||
1263 | buildcheck: | |
1264 | $(PERL) $(srctree)/scripts/reference_discarded.pl | |
1265 | $(PERL) $(srctree)/scripts/reference_init.pl | |
1266 | ||
1267 | namespacecheck: | |
1268 | $(PERL) $(srctree)/scripts/namespace.pl | |
1269 | ||
1270 | endif #ifeq ($(config-targets),1) | |
1271 | endif #ifeq ($(mixed-targets),1) | |
1272 | ||
1273 | .PHONY: checkstack | |
1274 | checkstack: | |
1275 | $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ | |
1276 | $(PERL) $(src)/scripts/checkstack.pl $(ARCH) | |
1277 | ||
1278 | kernelrelease: | |
1279 | @echo $(KERNELRELEASE) | |
1280 | ||
1281 | # FIXME Should go into a make.lib or something | |
1282 | # =========================================================================== | |
1283 | ||
1284 | quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) | |
1285 | cmd_rmdirs = rm -rf $(rm-dirs) | |
1286 | ||
1287 | quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) | |
1288 | cmd_rmfiles = rm -f $(rm-files) | |
1289 | ||
1290 | ||
1291 | a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \ | |
1292 | $(NOSTDINC_FLAGS) $(CPPFLAGS) \ | |
1293 | $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o) | |
1294 | ||
1295 | quiet_cmd_as_o_S = AS $@ | |
1296 | cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< | |
1297 | ||
1298 | # read all saved command lines | |
1299 | ||
1300 | targets := $(wildcard $(sort $(targets))) | |
1301 | cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) | |
1302 | ||
1303 | ifneq ($(cmd_files),) | |
1304 | $(cmd_files): ; # Do not try to update included dependency files | |
1305 | include $(cmd_files) | |
1306 | endif | |
1307 | ||
1da177e4 LT |
1308 | # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir |
1309 | # Usage: | |
1310 | # $(Q)$(MAKE) $(clean)=dir | |
1311 | clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj | |
1312 | ||
1da177e4 LT |
1313 | endif # skip-makefile |
1314 | ||
1315 | FORCE: |