[deliverable/linux.git] / arch / arm / Kconfig.debug

menu "Kernel hacking"

source "lib/Kconfig.debug"

config STRICT_DEVMEM
	bool "Filter access to /dev/mem"
	depends on MMU
	---help---
	  If this option is disabled, you allow userspace (root) access to all
	  of memory, including kernel and userspace memory. Accidental
	  access to this is obviously disastrous, but specific access can
	  be used by people debugging the kernel.

	  If this option is switched on, the /dev/mem file only allows
	  userspace access to memory mapped peripherals.

          If in doubt, say Y.

# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
	bool
	depends on !THUMB2_KERNEL
	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
	help
	  If you say N here, the resulting kernel will be slightly smaller and
	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
	  when a problem occurs with the kernel, the information that is
	  reported is severely limited.

config ARM_UNWIND
	bool "Enable stack unwinding support (EXPERIMENTAL)"
	depends on AEABI && EXPERIMENTAL
	default y
	help
	  This option enables stack unwinding support in the kernel
	  using the information automatically generated by the
	  compiler. The resulting kernel image is slightly bigger but
	  the performance is not affected. Currently, this feature
	  only works with EABI compilers. If unsure say Y.

config OLD_MCOUNT
	bool
	depends on FUNCTION_TRACER && FRAME_POINTER
	default y

config DEBUG_USER
	bool "Verbose user fault messages"
	help
	  When a user program crashes due to an exception, the kernel can
	  print a brief message explaining what the problem was. This is
	  sometimes helpful for debugging but serves no purpose on a
	  production system. Most people should say N here.

	  In addition, you need to pass user_debug=N on the kernel command
	  line to enable this feature.  N consists of the sum of:

	      1 - undefined instruction events
	      2 - system calls
	      4 - invalid data aborts
	      8 - SIGSEGV faults
	     16 - SIGBUS faults

# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
	bool "Kernel low-level debugging functions"
	depends on DEBUG_KERNEL
	help
	  Say Y here to include definitions of printascii, printch, printhex
	  in the kernel.  This is helpful if you are debugging code that
	  executes before the console is initialized.

config EARLY_PRINTK
	bool "Early printk"
	depends on DEBUG_LL
	help
	  Say Y here if you want to have an early console using the
	  kernel low-level debugging functions. Add earlyprintk to your
	  kernel parameters to enable this console.

config DEBUG_ICEDCC
	bool "Kernel low-level debugging via EmbeddedICE DCC channel"
	depends on DEBUG_LL
	help
	  Say Y here if you want the debug print routines to direct their
	  output to the EmbeddedICE macrocell's DCC channel using
	  co-processor 14. This is known to work on the ARM9 style ICE
	  channel and on the XScale with the PEEDI.

	  It does include a timeout to ensure that the system does not
	  totally freeze when there is nothing connected to read.

config OC_ETM
	bool "On-chip ETM and ETB"
	select ARM_AMBA
	help
	  Enables the on-chip embedded trace macrocell and embedded trace
	  buffer driver that will allow you to collect traces of the
	  kernel code.

config DEBUG_DC21285_PORT
	bool "Kernel low-level debugging messages via footbridge serial port"
	depends on DEBUG_LL && FOOTBRIDGE
	help
	  Say Y here if you want the debug print routines to direct their
	  output to the serial port in the DC21285 (Footbridge). Saying N
	  will cause the debug messages to appear on the first 16550
	  serial port.

config DEBUG_CLPS711X_UART2
	bool "Kernel low-level debugging messages via UART2"
	depends on DEBUG_LL && ARCH_CLPS711X
	help
	  Say Y here if you want the debug print routines to direct their
	  output to the second serial port on these devices.  Saying N will
	  cause the debug messages to appear on the first serial port.

config DEBUG_S3C_UART
	depends on PLAT_SAMSUNG
	int "S3C UART to use for low-level debug"
	default "0"
	help
	  Choice for UART for kernel low-level using S3C UARTS,
	  should be between zero and two. The port must have been
	  initialised by the boot-loader before use.

	  The uncompressor code port configuration is now handled
	  by CONFIG_S3C_LOWLEVEL_UART_PORT.

endmenu
Commit	Line	Data
1da177e4 LT	1	menu "Kernel hacking"
	2
	3	source "lib/Kconfig.debug"
	4
087aaffc NP	5	config STRICT_DEVMEM
	6	bool "Filter access to /dev/mem"
	7	depends on MMU
	8	---help---
	9	If this option is disabled, you allow userspace (root) access to all
	10	of memory, including kernel and userspace memory. Accidental
	11	access to this is obviously disastrous, but specific access can
	12	be used by people debugging the kernel.
	13
	14	If this option is switched on, the /dev/mem file only allows
	15	userspace access to memory mapped peripherals.
	16
	17	If in doubt, say Y.
	18
adf8b37b	19	# RMK wants arm kernels compiled with frame pointers or stack unwinding.
1da177e4 LT	20	# If you know what you are doing and are willing to live without stack
	21	# traces, you can get a slightly smaller kernel by setting this option to
	22	# n, but then RMK will have to kill you ;).
	23	config FRAME_POINTER
	24	bool
16c79651	25	depends on !THUMB2_KERNEL
0e341af8	26	default y if !ARM_UNWIND \|\| FUNCTION_GRAPH_TRACER
1da177e4 LT	27	help
1da177e4 LT	28	If you say N here, the resulting kernel will be slightly smaller and
adf8b37b CM	29	faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
	30	when a problem occurs with the kernel, the information that is
	31	reported is severely limited.
	32
	33	config ARM_UNWIND
4a50bfe3	34	bool "Enable stack unwinding support (EXPERIMENTAL)"
adf8b37b CM	35	depends on AEABI && EXPERIMENTAL
	36	default y
	37	help
	38	This option enables stack unwinding support in the kernel
	39	using the information automatically generated by the
	40	compiler. The resulting kernel image is slightly bigger but
	41	the performance is not affected. Currently, this feature
	42	only works with EABI compilers. If unsure say Y.
1da177e4	43
09bfafac RV	44	config OLD_MCOUNT
	45	bool
	46	depends on FUNCTION_TRACER && FRAME_POINTER
	47	default y
	48
1da177e4 LT	49	config DEBUG_USER
	50	bool "Verbose user fault messages"
	51	help
	52	When a user program crashes due to an exception, the kernel can
	53	print a brief message explaining what the problem was. This is
	54	sometimes helpful for debugging but serves no purpose on a
	55	production system. Most people should say N here.
	56
	57	In addition, you need to pass user_debug=N on the kernel command
	58	line to enable this feature. N consists of the sum of:
	59
	60	1 - undefined instruction events
	61	2 - system calls
	62	4 - invalid data aborts
	63	8 - SIGSEGV faults
	64	16 - SIGBUS faults
	65
1da177e4 LT	66	# These options are only for real kernel hackers who want to get their hands dirty.
	67	config DEBUG_LL
	68	bool "Kernel low-level debugging functions"
	69	depends on DEBUG_KERNEL
	70	help
35efb606	71	Say Y here to include definitions of printascii, printch, printhex
1da177e4 LT	72	in the kernel. This is helpful if you are debugging code that
	73	executes before the console is initialized.
	74
93fd03a8 CM	75	config EARLY_PRINTK
	76	bool "Early printk"
	77	depends on DEBUG_LL
	78	help
	79	Say Y here if you want to have an early console using the
	80	kernel low-level debugging functions. Add earlyprintk to your
	81	kernel parameters to enable this console.
	82
1da177e4 LT	83	config DEBUG_ICEDCC
	84	bool "Kernel low-level debugging via EmbeddedICE DCC channel"
	85	depends on DEBUG_LL
	86	help
	87	Say Y here if you want the debug print routines to direct their
	88	output to the EmbeddedICE macrocell's DCC channel using
	89	co-processor 14. This is known to work on the ARM9 style ICE
c633c3cf	90	channel and on the XScale with the PEEDI.
1da177e4 LT	91
	92	It does include a timeout to ensure that the system does not
	93	totally freeze when there is nothing connected to read.
	94
c5d6c770 AS	95	config OC_ETM
	96	bool "On-chip ETM and ETB"
	97	select ARM_AMBA
	98	help
	99	Enables the on-chip embedded trace macrocell and embedded trace
	100	buffer driver that will allow you to collect traces of the
	101	kernel code.
	102
1da177e4 LT	103	config DEBUG_DC21285_PORT
	104	bool "Kernel low-level debugging messages via footbridge serial port"
	105	depends on DEBUG_LL && FOOTBRIDGE
	106	help
	107	Say Y here if you want the debug print routines to direct their
	108	output to the serial port in the DC21285 (Footbridge). Saying N
	109	will cause the debug messages to appear on the first 16550
	110	serial port.
	111
	112	config DEBUG_CLPS711X_UART2
	113	bool "Kernel low-level debugging messages via UART2"
	114	depends on DEBUG_LL && ARCH_CLPS711X
	115	help
	116	Say Y here if you want the debug print routines to direct their
	117	output to the second serial port on these devices. Saying N will
	118	cause the debug messages to appear on the first serial port.
	119
3ec20520	120	config DEBUG_S3C_UART
89f1fa08	121	depends on PLAT_SAMSUNG
3ec20520	122	int "S3C UART to use for low-level debug"
1da177e4 LT	123	default "0"
1da177e4 LT	124	help
3ec20520	125	Choice for UART for kernel low-level using S3C UARTS,
1da177e4	126	should be between zero and two. The port must have been
c41045a4	127	initialised by the boot-loader before use.
1da177e4 LT	128
1da177e4 LT	129	The uncompressor code port configuration is now handled
c7657846	130	by CONFIG_S3C_LOWLEVEL_UART_PORT.
1da177e4 LT	131
1da177e4 LT	132	endmenu