Commit | Line | Data |
---|---|---|
4730bcfb AM |
1 | /* |
2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | ||
9 | /* AM43x EPOS EVM */ | |
10 | ||
11 | /dts-v1/; | |
12 | ||
13 | #include "am4372.dtsi" | |
e54686e4 M |
14 | #include <dt-bindings/pinctrl/am43xx.h> |
15 | #include <dt-bindings/gpio/gpio.h> | |
2e3a9385 | 16 | #include <dt-bindings/pwm/pwm.h> |
4730bcfb AM |
17 | |
18 | / { | |
19 | model = "TI AM43x EPOS EVM"; | |
20 | compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; | |
e54686e4 | 21 | |
999c3f1a TV |
22 | aliases { |
23 | display0 = &lcd0; | |
24 | }; | |
25 | ||
e54686e4 M |
26 | vmmcsd_fixed: fixedregulator-sd { |
27 | compatible = "regulator-fixed"; | |
28 | regulator-name = "vmmcsd_fixed"; | |
29 | regulator-min-microvolt = <3300000>; | |
30 | regulator-max-microvolt = <3300000>; | |
31 | enable-active-high; | |
32 | }; | |
33 | ||
999c3f1a TV |
34 | lcd0: display { |
35 | compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; | |
36 | label = "lcd"; | |
37 | ||
38 | pinctrl-names = "default"; | |
39 | pinctrl-0 = <&lcd_pins>; | |
40 | ||
41 | /* | |
42 | * SelLCDorHDMI, LOW to select HDMI. This is not really the | |
43 | * panel's enable GPIO, but we don't have HDMI driver support nor | |
44 | * support to switch between two displays, so using this gpio as | |
45 | * panel's enable should be safe. | |
46 | */ | |
47 | enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; | |
48 | ||
49 | panel-timing { | |
50 | clock-frequency = <33000000>; | |
51 | hactive = <800>; | |
52 | vactive = <480>; | |
53 | hfront-porch = <210>; | |
54 | hback-porch = <16>; | |
55 | hsync-len = <30>; | |
56 | vback-porch = <10>; | |
57 | vfront-porch = <22>; | |
58 | vsync-len = <13>; | |
59 | hsync-active = <0>; | |
60 | vsync-active = <0>; | |
61 | de-active = <1>; | |
62 | pixelclk-active = <1>; | |
63 | }; | |
64 | ||
65 | port { | |
66 | lcd_in: endpoint { | |
67 | remote-endpoint = <&dpi_out>; | |
68 | }; | |
69 | }; | |
70 | }; | |
71 | ||
e54686e4 M |
72 | am43xx_pinmux: pinmux@44e10800 { |
73 | cpsw_default: cpsw_default { | |
74 | pinctrl-single,pins = < | |
75 | /* Slave 1 */ | |
76 | 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ | |
77 | 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ | |
78 | 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ | |
79 | 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */ | |
80 | 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ | |
81 | 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ | |
82 | 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ | |
83 | 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ | |
84 | 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ | |
85 | >; | |
86 | }; | |
87 | ||
88 | cpsw_sleep: cpsw_sleep { | |
89 | pinctrl-single,pins = < | |
90 | /* Slave 1 reset value */ | |
91 | 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
92 | 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
93 | 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
94 | 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
95 | 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
96 | 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
97 | 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
98 | 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
99 | 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
100 | >; | |
101 | }; | |
102 | ||
103 | davinci_mdio_default: davinci_mdio_default { | |
104 | pinctrl-single,pins = < | |
105 | /* MDIO */ | |
106 | 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ | |
107 | 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ | |
108 | >; | |
109 | }; | |
110 | ||
111 | davinci_mdio_sleep: davinci_mdio_sleep { | |
112 | pinctrl-single,pins = < | |
113 | /* MDIO reset value */ | |
114 | 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
115 | 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) | |
116 | >; | |
117 | }; | |
118 | ||
119 | i2c0_pins: pinmux_i2c0_pins { | |
120 | pinctrl-single,pins = < | |
121 | 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ | |
122 | 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ | |
123 | >; | |
124 | }; | |
f68e355c PG |
125 | |
126 | nand_flash_x8: nand_flash_x8 { | |
127 | pinctrl-single,pins = < | |
128 | 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.SELQSPIorNAND/GPIO */ | |
129 | 0x0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ | |
130 | 0x4 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ | |
131 | 0x8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ | |
132 | 0xc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ | |
133 | 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ | |
134 | 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ | |
135 | 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ | |
136 | 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ | |
137 | 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ | |
138 | 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ | |
139 | 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ | |
140 | 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ | |
141 | 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ | |
142 | 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ | |
143 | 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ | |
144 | >; | |
145 | }; | |
f777ba17 | 146 | |
2e3a9385 SP |
147 | ecap0_pins: backlight_pins { |
148 | pinctrl-single,pins = < | |
149 | 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ | |
150 | >; | |
151 | }; | |
0aeaf1c6 SP |
152 | |
153 | i2c2_pins: pinmux_i2c2_pins { | |
154 | pinctrl-single,pins = < | |
155 | 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_sda.i2c2_sda */ | |
156 | 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8) /* i2c2_scl.i2c2_scl */ | |
157 | >; | |
158 | }; | |
416f3d50 SP |
159 | |
160 | spi0_pins: pinmux_spi0_pins { | |
161 | pinctrl-single,pins = < | |
162 | 0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ | |
163 | 0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ | |
164 | 0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */ | |
165 | 0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ | |
166 | >; | |
167 | }; | |
168 | ||
169 | spi1_pins: pinmux_spi1_pins { | |
170 | pinctrl-single,pins = < | |
171 | 0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ | |
172 | 0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ | |
173 | 0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ | |
174 | 0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ | |
175 | >; | |
176 | }; | |
d2885dbb B |
177 | |
178 | mmc1_pins: pinmux_mmc1_pins { | |
179 | pinctrl-single,pins = < | |
180 | 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ | |
181 | >; | |
182 | }; | |
2a1a5043 SP |
183 | |
184 | qspi1_default: qspi1_default { | |
185 | pinctrl-single,pins = < | |
186 | 0x7c (PIN_INPUT_PULLUP | MUX_MODE3) | |
187 | 0x88 (PIN_INPUT_PULLUP | MUX_MODE2) | |
188 | 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) | |
189 | 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) | |
190 | 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) | |
191 | 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) | |
192 | >; | |
193 | }; | |
6cfcb5be RQ |
194 | |
195 | pixcir_ts_pins: pixcir_ts_pins { | |
196 | pinctrl-single,pins = < | |
197 | 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ | |
198 | >; | |
199 | }; | |
741cac5f SP |
200 | |
201 | hdq_pins: pinmux_hdq_pins { | |
202 | pinctrl-single,pins = < | |
203 | 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ | |
204 | >; | |
205 | }; | |
999c3f1a TV |
206 | |
207 | dss_pins: dss_pins { | |
208 | pinctrl-single,pins = < | |
209 | 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ | |
210 | 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
211 | 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
212 | 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
213 | 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
214 | 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
215 | 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) | |
216 | 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ | |
217 | 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ | |
218 | 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
219 | 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
220 | 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
221 | 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
222 | 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
223 | 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
224 | 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
225 | 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
226 | 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
227 | 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
228 | 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
229 | 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
230 | 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
231 | 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) | |
232 | 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ | |
233 | 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ | |
234 | 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ | |
235 | 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ | |
236 | 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ | |
237 | >; | |
238 | }; | |
239 | ||
240 | lcd_pins: lcd_pins { | |
241 | pinctrl-single,pins = < | |
242 | /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ | |
243 | 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) | |
244 | >; | |
245 | }; | |
e54686e4 M |
246 | }; |
247 | ||
248 | matrix_keypad: matrix_keypad@0 { | |
249 | compatible = "gpio-matrix-keypad"; | |
250 | debounce-delay-ms = <5>; | |
251 | col-scan-delay-us = <2>; | |
252 | ||
253 | row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */ | |
254 | &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */ | |
255 | &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */ | |
256 | &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */ | |
257 | ||
258 | col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */ | |
259 | &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */ | |
260 | &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */ | |
261 | &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */ | |
262 | ||
263 | linux,keymap = <0x00000201 /* P1 */ | |
264 | 0x01000204 /* P4 */ | |
265 | 0x02000207 /* P7 */ | |
266 | 0x0300020a /* NUMERIC_STAR */ | |
267 | 0x00010202 /* P2 */ | |
268 | 0x01010205 /* P5 */ | |
269 | 0x02010208 /* P8 */ | |
270 | 0x03010200 /* P0 */ | |
271 | 0x00020203 /* P3 */ | |
272 | 0x01020206 /* P6 */ | |
273 | 0x02020209 /* P9 */ | |
274 | 0x0302020b /* NUMERIC_POUND */ | |
275 | 0x00030067 /* UP */ | |
276 | 0x0103006a /* RIGHT */ | |
277 | 0x0203006c /* DOWN */ | |
278 | 0x03030069>; /* LEFT */ | |
279 | }; | |
2e3a9385 SP |
280 | |
281 | backlight { | |
282 | compatible = "pwm-backlight"; | |
283 | pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; | |
284 | brightness-levels = <0 51 53 56 62 75 101 152 255>; | |
285 | default-brightness-level = <8>; | |
286 | }; | |
e54686e4 M |
287 | }; |
288 | ||
289 | &mmc1 { | |
290 | status = "okay"; | |
291 | vmmc-supply = <&vmmcsd_fixed>; | |
292 | bus-width = <4>; | |
d2885dbb B |
293 | pinctrl-names = "default"; |
294 | pinctrl-0 = <&mmc1_pins>; | |
295 | cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; | |
e54686e4 M |
296 | }; |
297 | ||
298 | &mac { | |
299 | pinctrl-names = "default", "sleep"; | |
300 | pinctrl-0 = <&cpsw_default>; | |
301 | pinctrl-1 = <&cpsw_sleep>; | |
302 | status = "okay"; | |
303 | }; | |
304 | ||
305 | &davinci_mdio { | |
306 | pinctrl-names = "default", "sleep"; | |
307 | pinctrl-0 = <&davinci_mdio_default>; | |
308 | pinctrl-1 = <&davinci_mdio_sleep>; | |
309 | status = "okay"; | |
310 | }; | |
311 | ||
312 | &cpsw_emac0 { | |
313 | phy_id = <&davinci_mdio>, <16>; | |
314 | phy-mode = "rmii"; | |
315 | }; | |
316 | ||
317 | &cpsw_emac1 { | |
318 | phy_id = <&davinci_mdio>, <1>; | |
319 | phy-mode = "rmii"; | |
320 | }; | |
321 | ||
fe797553 GC |
322 | &phy_sel { |
323 | rmii-clock-ext; | |
324 | }; | |
325 | ||
e54686e4 M |
326 | &i2c0 { |
327 | status = "okay"; | |
328 | pinctrl-names = "default"; | |
329 | pinctrl-0 = <&i2c0_pins>; | |
330 | ||
331 | at24@50 { | |
332 | compatible = "at24,24c256"; | |
333 | pagesize = <64>; | |
334 | reg = <0x50>; | |
335 | }; | |
336 | ||
337 | pixcir_ts@5c { | |
6cfcb5be RQ |
338 | compatible = "pixcir,pixcir_tangoc"; |
339 | pinctrl-names = "default"; | |
340 | pinctrl-0 = <&pixcir_ts_pins>; | |
e54686e4 M |
341 | reg = <0x5c>; |
342 | interrupt-parent = <&gpio1>; | |
343 | interrupts = <17 0>; | |
344 | ||
345 | attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; | |
346 | ||
347 | x-size = <1024>; | |
6cfcb5be | 348 | y-size = <600>; |
e54686e4 M |
349 | }; |
350 | }; | |
351 | ||
0aeaf1c6 SP |
352 | &i2c2 { |
353 | pinctrl-names = "default"; | |
354 | pinctrl-0 = <&i2c2_pins>; | |
355 | status = "okay"; | |
356 | }; | |
357 | ||
e54686e4 M |
358 | &gpio0 { |
359 | status = "okay"; | |
360 | }; | |
361 | ||
362 | &gpio1 { | |
363 | status = "okay"; | |
364 | }; | |
365 | ||
366 | &gpio2 { | |
367 | status = "okay"; | |
368 | }; | |
369 | ||
370 | &gpio3 { | |
371 | status = "okay"; | |
4730bcfb | 372 | }; |
f68e355c PG |
373 | |
374 | &elm { | |
375 | status = "okay"; | |
376 | }; | |
377 | ||
378 | &gpmc { | |
379 | status = "okay"; | |
380 | pinctrl-names = "default"; | |
381 | pinctrl-0 = <&nand_flash_x8>; | |
382 | ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ | |
383 | nand@0,0 { | |
384 | reg = <0 0 0>; /* CS0, offset 0 */ | |
385 | ti,nand-ecc-opt = "bch8"; | |
386 | ti,elm-id = <&elm>; | |
387 | nand-bus-width = <8>; | |
388 | gpmc,device-width = <1>; | |
389 | gpmc,sync-clk-ps = <0>; | |
390 | gpmc,cs-on-ns = <0>; | |
391 | gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */ | |
392 | gpmc,cs-wr-off-ns = <40>; | |
393 | gpmc,adv-on-ns = <0>; /* cs-on-ns */ | |
394 | gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */ | |
395 | gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */ | |
396 | gpmc,we-on-ns = <0>; /* cs-on-ns */ | |
397 | gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */ | |
398 | gpmc,oe-on-ns = <3>; /* cs-on-ns + tRR + 2 */ | |
399 | gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */ | |
400 | gpmc,access-ns = <30>; /* tCEA + 4*/ | |
401 | gpmc,rd-cycle-ns = <40>; | |
402 | gpmc,wr-cycle-ns = <40>; | |
403 | gpmc,wait-on-read = "true"; | |
404 | gpmc,wait-on-write = "true"; | |
405 | gpmc,bus-turnaround-ns = <0>; | |
406 | gpmc,cycle2cycle-delay-ns = <0>; | |
407 | gpmc,clk-activation-ns = <0>; | |
408 | gpmc,wait-monitoring-ns = <0>; | |
409 | gpmc,wr-access-ns = <40>; | |
410 | gpmc,wr-data-mux-bus-ns = <0>; | |
411 | /* MTD partition table */ | |
412 | /* All SPL-* partitions are sized to minimal length | |
413 | * which can be independently programmable. For | |
414 | * NAND flash this is equal to size of erase-block */ | |
415 | #address-cells = <1>; | |
416 | #size-cells = <1>; | |
417 | partition@0 { | |
418 | label = "NAND.SPL"; | |
419 | reg = <0x00000000 0x00040000>; | |
420 | }; | |
421 | partition@1 { | |
422 | label = "NAND.SPL.backup1"; | |
423 | reg = <0x00040000 0x00040000>; | |
424 | }; | |
425 | partition@2 { | |
426 | label = "NAND.SPL.backup2"; | |
427 | reg = <0x00080000 0x00040000>; | |
428 | }; | |
429 | partition@3 { | |
430 | label = "NAND.SPL.backup3"; | |
431 | reg = <0x000C0000 0x00040000>; | |
432 | }; | |
433 | partition@4 { | |
434 | label = "NAND.u-boot-spl-os"; | |
435 | reg = <0x00100000 0x00080000>; | |
436 | }; | |
437 | partition@5 { | |
438 | label = "NAND.u-boot"; | |
439 | reg = <0x00180000 0x00100000>; | |
440 | }; | |
441 | partition@6 { | |
442 | label = "NAND.u-boot-env"; | |
443 | reg = <0x00280000 0x00040000>; | |
444 | }; | |
445 | partition@7 { | |
446 | label = "NAND.u-boot-env.backup1"; | |
447 | reg = <0x002C0000 0x00040000>; | |
448 | }; | |
449 | partition@8 { | |
450 | label = "NAND.kernel"; | |
451 | reg = <0x00300000 0x00700000>; | |
452 | }; | |
453 | partition@9 { | |
454 | label = "NAND.file-system"; | |
c4de4ecd | 455 | reg = <0x00a00000 0x1f600000>; |
f68e355c PG |
456 | }; |
457 | }; | |
458 | }; | |
f777ba17 | 459 | |
2e3a9385 SP |
460 | &epwmss0 { |
461 | status = "okay"; | |
462 | }; | |
463 | ||
464 | &ecap0 { | |
465 | status = "okay"; | |
466 | pinctrl-names = "default"; | |
467 | pinctrl-0 = <&ecap0_pins>; | |
468 | }; | |
416f3d50 SP |
469 | |
470 | &spi0 { | |
471 | pinctrl-names = "default"; | |
472 | pinctrl-0 = <&spi0_pins>; | |
473 | status = "okay"; | |
474 | }; | |
475 | ||
476 | &spi1 { | |
477 | pinctrl-names = "default"; | |
478 | pinctrl-0 = <&spi1_pins>; | |
479 | status = "okay"; | |
480 | }; | |
61d5924f GC |
481 | |
482 | &usb2_phy1 { | |
483 | status = "okay"; | |
484 | }; | |
485 | ||
486 | &usb1 { | |
487 | dr_mode = "peripheral"; | |
488 | status = "okay"; | |
489 | }; | |
490 | ||
491 | &usb2_phy2 { | |
492 | status = "okay"; | |
493 | }; | |
494 | ||
495 | &usb2 { | |
496 | dr_mode = "host"; | |
497 | status = "okay"; | |
498 | }; | |
2a1a5043 SP |
499 | |
500 | &qspi { | |
501 | status = "okay"; | |
502 | pinctrl-names = "default"; | |
503 | pinctrl-0 = <&qspi1_default>; | |
504 | ||
505 | spi-max-frequency = <48000000>; | |
506 | m25p80@0 { | |
507 | compatible = "mx66l51235l"; | |
508 | spi-max-frequency = <48000000>; | |
509 | reg = <0>; | |
510 | spi-cpol; | |
511 | spi-cpha; | |
512 | spi-tx-bus-width = <1>; | |
513 | spi-rx-bus-width = <4>; | |
514 | #address-cells = <1>; | |
515 | #size-cells = <1>; | |
516 | ||
517 | /* MTD partition table. | |
518 | * The ROM checks the first 512KiB | |
519 | * for a valid file to boot(XIP). | |
520 | */ | |
521 | partition@0 { | |
522 | label = "QSPI.U_BOOT"; | |
523 | reg = <0x00000000 0x000080000>; | |
524 | }; | |
525 | partition@1 { | |
526 | label = "QSPI.U_BOOT.backup"; | |
527 | reg = <0x00080000 0x00080000>; | |
528 | }; | |
529 | partition@2 { | |
530 | label = "QSPI.U-BOOT-SPL_OS"; | |
531 | reg = <0x00100000 0x00010000>; | |
532 | }; | |
533 | partition@3 { | |
534 | label = "QSPI.U_BOOT_ENV"; | |
535 | reg = <0x00110000 0x00010000>; | |
536 | }; | |
537 | partition@4 { | |
538 | label = "QSPI.U-BOOT-ENV.backup"; | |
539 | reg = <0x00120000 0x00010000>; | |
540 | }; | |
541 | partition@5 { | |
542 | label = "QSPI.KERNEL"; | |
543 | reg = <0x00130000 0x0800000>; | |
544 | }; | |
545 | partition@6 { | |
546 | label = "QSPI.FILESYSTEM"; | |
547 | reg = <0x00930000 0x36D0000>; | |
548 | }; | |
549 | }; | |
550 | }; | |
741cac5f SP |
551 | |
552 | &hdq { | |
553 | status = "okay"; | |
554 | pinctrl-names = "default"; | |
555 | pinctrl-0 = <&hdq_pins>; | |
556 | }; | |
999c3f1a TV |
557 | |
558 | &dss { | |
559 | status = "ok"; | |
560 | ||
561 | pinctrl-names = "default"; | |
562 | pinctrl-0 = <&dss_pins>; | |
563 | ||
564 | port { | |
565 | dpi_out: endpoint@0 { | |
566 | remote-endpoint = <&lcd_in>; | |
567 | data-lines = <24>; | |
568 | }; | |
569 | }; | |
570 | }; |