Commit | Line | Data |
---|---|---|
5a0f93c6 NM |
1 | /* |
2 | * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | /dts-v1/; | |
9 | ||
10 | #include "dra74x.dtsi" | |
11 | #include <dt-bindings/clk/ti-dra7-atl.h> | |
12 | #include <dt-bindings/gpio/gpio.h> | |
13 | #include <dt-bindings/interrupt-controller/irq.h> | |
14 | ||
15 | / { | |
16 | model = "TI AM5728 BeagleBoard-X15"; | |
17 | compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; | |
18 | ||
19 | aliases { | |
20 | rtc0 = &mcp_rtc; | |
21 | rtc1 = &tps659038_rtc; | |
22 | }; | |
23 | ||
24 | memory { | |
25 | device_type = "memory"; | |
26 | reg = <0x80000000 0x80000000>; | |
27 | }; | |
28 | ||
29 | vdd_3v3: fixedregulator-vdd_3v3 { | |
30 | compatible = "regulator-fixed"; | |
31 | regulator-name = "vdd_3v3"; | |
32 | vin-supply = <®en1>; | |
33 | regulator-min-microvolt = <3300000>; | |
34 | regulator-max-microvolt = <3300000>; | |
35 | }; | |
36 | ||
37 | vtt_fixed: fixedregulator-vtt { | |
38 | /* TPS51200 */ | |
39 | compatible = "regulator-fixed"; | |
40 | regulator-name = "vtt_fixed"; | |
41 | vin-supply = <&smps3_reg>; | |
42 | regulator-min-microvolt = <3300000>; | |
43 | regulator-max-microvolt = <3300000>; | |
44 | regulator-always-on; | |
45 | regulator-boot-on; | |
46 | enable-active-high; | |
47 | gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; | |
48 | }; | |
49 | ||
50 | leds { | |
51 | compatible = "gpio-leds"; | |
52 | pinctrl-names = "default"; | |
53 | pinctrl-0 = <&leds_pins_default>; | |
54 | ||
55 | led@0 { | |
56 | label = "beagle-x15:usr0"; | |
57 | gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; | |
58 | linux,default-trigger = "heartbeat"; | |
59 | default-state = "off"; | |
60 | }; | |
61 | ||
62 | led@1 { | |
63 | label = "beagle-x15:usr1"; | |
64 | gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; | |
65 | linux,default-trigger = "cpu0"; | |
66 | default-state = "off"; | |
67 | }; | |
68 | ||
69 | led@2 { | |
70 | label = "beagle-x15:usr2"; | |
71 | gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; | |
72 | linux,default-trigger = "mmc0"; | |
73 | default-state = "off"; | |
74 | }; | |
75 | ||
76 | led@3 { | |
77 | label = "beagle-x15:usr3"; | |
78 | gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; | |
79 | linux,default-trigger = "ide-disk"; | |
80 | default-state = "off"; | |
81 | }; | |
82 | }; | |
7a03f2c0 NM |
83 | |
84 | gpio_fan: gpio_fan { | |
85 | /* Based on 5v 500mA AFB02505HHB */ | |
86 | compatible = "gpio-fan"; | |
87 | gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>; | |
88 | gpio-fan,speed-map = <0 0>, | |
89 | <13000 1>; | |
90 | }; | |
f60db98e RQ |
91 | |
92 | extcon_usb1: extcon_usb1 { | |
93 | compatible = "linux,extcon-usb-gpio"; | |
94 | id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; | |
95 | pinctrl-names = "default"; | |
96 | pinctrl-0 = <&extcon_usb1_pins>; | |
97 | }; | |
98 | ||
99 | extcon_usb2: extcon_usb2 { | |
100 | compatible = "linux,extcon-usb-gpio"; | |
101 | id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; | |
102 | pinctrl-names = "default"; | |
103 | pinctrl-0 = <&extcon_usb2_pins>; | |
104 | }; | |
5a0f93c6 NM |
105 | }; |
106 | ||
107 | &dra7_pmx_core { | |
108 | leds_pins_default: leds_pins_default { | |
109 | pinctrl-single,pins = < | |
110 | 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ | |
111 | 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ | |
112 | 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ | |
113 | 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ | |
114 | >; | |
115 | }; | |
116 | ||
117 | i2c1_pins_default: i2c1_pins_default { | |
118 | pinctrl-single,pins = < | |
119 | 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ | |
120 | 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ | |
121 | >; | |
122 | }; | |
123 | ||
124 | i2c3_pins_default: i2c3_pins_default { | |
125 | pinctrl-single,pins = < | |
126 | 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ | |
127 | 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ | |
128 | >; | |
129 | }; | |
130 | ||
131 | uart3_pins_default: uart3_pins_default { | |
132 | pinctrl-single,pins = < | |
133 | 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */ | |
134 | 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */ | |
135 | >; | |
136 | }; | |
137 | ||
138 | mmc1_pins_default: mmc1_pins_default { | |
139 | pinctrl-single,pins = < | |
140 | 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ | |
141 | 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ | |
142 | 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ | |
143 | 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ | |
144 | 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ | |
145 | 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ | |
146 | 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ | |
147 | >; | |
148 | }; | |
149 | ||
150 | mmc2_pins_default: mmc2_pins_default { | |
151 | pinctrl-single,pins = < | |
152 | 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ | |
153 | 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ | |
154 | 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ | |
155 | 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ | |
156 | 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ | |
157 | 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ | |
158 | 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ | |
159 | 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ | |
160 | 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ | |
161 | 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ | |
162 | >; | |
163 | }; | |
164 | ||
a75dacf8 FB |
165 | cpsw_pins_default: cpsw_pins_default { |
166 | pinctrl-single,pins = < | |
167 | /* Slave 1 */ | |
168 | 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ | |
169 | 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ | |
170 | 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ | |
171 | 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ | |
172 | 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ | |
173 | 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ | |
174 | 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ | |
175 | 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ | |
176 | 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ | |
177 | 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ | |
178 | 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ | |
179 | 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ | |
180 | ||
181 | /* Slave 2 */ | |
182 | 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ | |
183 | 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ | |
184 | 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ | |
185 | 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ | |
186 | 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ | |
187 | 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ | |
188 | 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ | |
189 | 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ | |
190 | 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ | |
191 | 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ | |
192 | 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ | |
193 | 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ | |
194 | >; | |
195 | ||
196 | }; | |
197 | ||
198 | cpsw_pins_sleep: cpsw_pins_sleep { | |
199 | pinctrl-single,pins = < | |
200 | /* Slave 1 */ | |
201 | 0x250 (PIN_INPUT | MUX_MODE15) | |
202 | 0x254 (PIN_INPUT | MUX_MODE15) | |
203 | 0x258 (PIN_INPUT | MUX_MODE15) | |
204 | 0x25c (PIN_INPUT | MUX_MODE15) | |
205 | 0x260 (PIN_INPUT | MUX_MODE15) | |
206 | 0x264 (PIN_INPUT | MUX_MODE15) | |
207 | 0x268 (PIN_INPUT | MUX_MODE15) | |
208 | 0x26c (PIN_INPUT | MUX_MODE15) | |
209 | 0x270 (PIN_INPUT | MUX_MODE15) | |
210 | 0x274 (PIN_INPUT | MUX_MODE15) | |
211 | 0x278 (PIN_INPUT | MUX_MODE15) | |
212 | 0x27c (PIN_INPUT | MUX_MODE15) | |
213 | ||
214 | /* Slave 2 */ | |
215 | 0x198 (PIN_INPUT | MUX_MODE15) | |
216 | 0x19c (PIN_INPUT | MUX_MODE15) | |
217 | 0x1a0 (PIN_INPUT | MUX_MODE15) | |
218 | 0x1a4 (PIN_INPUT | MUX_MODE15) | |
219 | 0x1a8 (PIN_INPUT | MUX_MODE15) | |
220 | 0x1ac (PIN_INPUT | MUX_MODE15) | |
221 | 0x1b0 (PIN_INPUT | MUX_MODE15) | |
222 | 0x1b4 (PIN_INPUT | MUX_MODE15) | |
223 | 0x1b8 (PIN_INPUT | MUX_MODE15) | |
224 | 0x1bc (PIN_INPUT | MUX_MODE15) | |
225 | 0x1c0 (PIN_INPUT | MUX_MODE15) | |
226 | 0x1c4 (PIN_INPUT | MUX_MODE15) | |
227 | >; | |
228 | }; | |
229 | ||
230 | davinci_mdio_pins_default: davinci_mdio_pins_default { | |
231 | pinctrl-single,pins = < | |
232 | /* MDIO */ | |
233 | 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ | |
234 | 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ | |
235 | >; | |
236 | }; | |
237 | ||
238 | davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { | |
239 | pinctrl-single,pins = < | |
240 | 0x23c (PIN_INPUT | MUX_MODE15) | |
241 | 0x240 (PIN_INPUT | MUX_MODE15) | |
242 | >; | |
243 | }; | |
244 | ||
5a0f93c6 NM |
245 | tps659038_pins_default: tps659038_pins_default { |
246 | pinctrl-single,pins = < | |
247 | 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ | |
248 | >; | |
249 | }; | |
250 | ||
251 | tmp102_pins_default: tmp102_pins_default { | |
252 | pinctrl-single,pins = < | |
253 | 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ | |
254 | >; | |
255 | }; | |
256 | ||
257 | mcp79410_pins_default: mcp79410_pins_default { | |
258 | pinctrl-single,pins = < | |
259 | 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ | |
260 | >; | |
261 | }; | |
262 | ||
263 | usb1_pins: pinmux_usb1_pins { | |
264 | pinctrl-single,pins = < | |
265 | 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ | |
266 | >; | |
267 | }; | |
268 | ||
f60db98e RQ |
269 | extcon_usb1_pins: extcon_usb1_pins { |
270 | pinctrl-single,pins = < | |
271 | 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ | |
272 | >; | |
273 | }; | |
274 | ||
275 | extcon_usb2_pins: extcon_usb2_pins { | |
276 | pinctrl-single,pins = < | |
277 | 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ | |
278 | >; | |
279 | }; | |
5a0f93c6 NM |
280 | }; |
281 | ||
282 | &i2c1 { | |
283 | status = "okay"; | |
284 | pinctrl-names = "default"; | |
285 | pinctrl-0 = <&i2c1_pins_default>; | |
286 | clock-frequency = <400000>; | |
287 | ||
288 | tps659038: tps659038@58 { | |
289 | compatible = "ti,tps659038"; | |
290 | reg = <0x58>; | |
291 | interrupt-parent = <&gpio1>; | |
292 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
293 | ||
294 | pinctrl-names = "default"; | |
295 | pinctrl-0 = <&tps659038_pins_default>; | |
296 | ||
297 | #interrupt-cells = <2>; | |
298 | interrupt-controller; | |
299 | ||
300 | ti,system-power-controller; | |
301 | ||
302 | tps659038_pmic { | |
303 | compatible = "ti,tps659038-pmic"; | |
304 | ||
305 | regulators { | |
306 | smps12_reg: smps12 { | |
307 | /* VDD_MPU */ | |
308 | regulator-name = "smps12"; | |
309 | regulator-min-microvolt = < 850000>; | |
310 | regulator-max-microvolt = <1250000>; | |
311 | regulator-always-on; | |
312 | regulator-boot-on; | |
313 | }; | |
314 | ||
315 | smps3_reg: smps3 { | |
316 | /* VDD_DDR */ | |
317 | regulator-name = "smps3"; | |
318 | regulator-min-microvolt = <1350000>; | |
319 | regulator-max-microvolt = <1350000>; | |
320 | regulator-always-on; | |
321 | regulator-boot-on; | |
322 | }; | |
323 | ||
324 | smps45_reg: smps45 { | |
325 | /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ | |
326 | regulator-name = "smps45"; | |
327 | regulator-min-microvolt = < 850000>; | |
328 | regulator-max-microvolt = <1150000>; | |
329 | regulator-always-on; | |
330 | regulator-boot-on; | |
331 | }; | |
332 | ||
333 | smps6_reg: smps6 { | |
334 | /* VDD_CORE */ | |
335 | regulator-name = "smps6"; | |
336 | regulator-min-microvolt = <850000>; | |
337 | regulator-max-microvolt = <1030000>; | |
338 | regulator-always-on; | |
339 | regulator-boot-on; | |
340 | }; | |
341 | ||
342 | /* SMPS7 unused */ | |
343 | ||
344 | smps8_reg: smps8 { | |
345 | /* VDD_1V8 */ | |
346 | regulator-name = "smps8"; | |
347 | regulator-min-microvolt = <1800000>; | |
348 | regulator-max-microvolt = <1800000>; | |
349 | regulator-always-on; | |
350 | regulator-boot-on; | |
351 | }; | |
352 | ||
353 | /* SMPS9 unused */ | |
354 | ||
355 | ldo1_reg: ldo1 { | |
356 | /* VDD_SD */ | |
357 | regulator-name = "ldo1"; | |
358 | regulator-min-microvolt = <1800000>; | |
359 | regulator-max-microvolt = <3300000>; | |
360 | regulator-boot-on; | |
361 | }; | |
362 | ||
363 | ldo2_reg: ldo2 { | |
364 | /* VDD_SHV5 */ | |
365 | regulator-name = "ldo2"; | |
366 | regulator-min-microvolt = <3300000>; | |
367 | regulator-max-microvolt = <3300000>; | |
368 | regulator-always-on; | |
369 | regulator-boot-on; | |
370 | }; | |
371 | ||
372 | ldo3_reg: ldo3 { | |
373 | /* VDDA_1V8_PHY */ | |
374 | regulator-name = "ldo3"; | |
375 | regulator-min-microvolt = <1800000>; | |
376 | regulator-max-microvolt = <1800000>; | |
377 | regulator-always-on; | |
378 | regulator-boot-on; | |
379 | }; | |
380 | ||
381 | ldo9_reg: ldo9 { | |
382 | /* VDD_RTC */ | |
383 | regulator-name = "ldo9"; | |
384 | regulator-min-microvolt = <1050000>; | |
385 | regulator-max-microvolt = <1050000>; | |
386 | regulator-always-on; | |
387 | regulator-boot-on; | |
388 | }; | |
389 | ||
390 | ldoln_reg: ldoln { | |
391 | /* VDDA_1V8_PLL */ | |
392 | regulator-name = "ldoln"; | |
393 | regulator-min-microvolt = <1800000>; | |
394 | regulator-max-microvolt = <1800000>; | |
395 | regulator-always-on; | |
396 | regulator-boot-on; | |
397 | }; | |
398 | ||
399 | ldousb_reg: ldousb { | |
400 | /* VDDA_3V_USB: VDDA_USBHS33 */ | |
401 | regulator-name = "ldousb"; | |
402 | regulator-min-microvolt = <3300000>; | |
403 | regulator-max-microvolt = <3300000>; | |
404 | regulator-boot-on; | |
405 | }; | |
406 | ||
407 | regen1: regen1 { | |
408 | /* VDD_3V3_ON */ | |
409 | regulator-name = "regen1"; | |
410 | regulator-boot-on; | |
411 | regulator-always-on; | |
412 | }; | |
413 | }; | |
414 | }; | |
415 | ||
416 | tps659038_rtc: tps659038_rtc { | |
417 | compatible = "ti,palmas-rtc"; | |
418 | interrupt-parent = <&tps659038>; | |
419 | interrupts = <8 IRQ_TYPE_EDGE_FALLING>; | |
420 | wakeup-source; | |
421 | }; | |
422 | ||
423 | tps659038_pwr_button: tps659038_pwr_button { | |
424 | compatible = "ti,palmas-pwrbutton"; | |
425 | interrupt-parent = <&tps659038>; | |
426 | interrupts = <1 IRQ_TYPE_EDGE_FALLING>; | |
427 | wakeup-source; | |
428 | ti,palmas-long-press-seconds = <12>; | |
429 | }; | |
7a03f2c0 NM |
430 | |
431 | tps659038_gpio: tps659038_gpio { | |
432 | compatible = "ti,palmas-gpio"; | |
433 | gpio-controller; | |
434 | #gpio-cells = <2>; | |
435 | }; | |
5a0f93c6 NM |
436 | }; |
437 | ||
438 | tmp102: tmp102@48 { | |
439 | compatible = "ti,tmp102"; | |
440 | reg = <0x48>; | |
441 | pinctrl-names = "default"; | |
442 | pinctrl-0 = <&tmp102_pins_default>; | |
443 | interrupt-parent = <&gpio7>; | |
444 | interrupts = <16 IRQ_TYPE_LEVEL_LOW>; | |
445 | }; | |
446 | }; | |
447 | ||
448 | &i2c3 { | |
449 | status = "okay"; | |
450 | pinctrl-names = "default"; | |
451 | pinctrl-0 = <&i2c3_pins_default>; | |
452 | clock-frequency = <400000>; | |
453 | ||
454 | mcp_rtc: rtc@6f { | |
455 | compatible = "microchip,mcp7941x"; | |
456 | reg = <0x6f>; | |
457 | interrupt-parent = <&gic>; | |
458 | interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */ | |
459 | ||
460 | pinctrl-names = "default"; | |
461 | pinctrl-0 = <&mcp79410_pins_default>; | |
462 | ||
463 | vcc-supply = <&vdd_3v3>; | |
464 | wakeup-source; | |
465 | }; | |
466 | }; | |
467 | ||
468 | &gpio7 { | |
469 | ti,no-reset-on-init; | |
470 | ti,no-idle-on-init; | |
471 | }; | |
472 | ||
473 | &cpu0 { | |
474 | cpu0-supply = <&smps12_reg>; | |
475 | voltage-tolerance = <1>; | |
476 | }; | |
477 | ||
478 | &uart3 { | |
479 | status = "okay"; | |
480 | interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, | |
481 | <&dra7_pmx_core 0x248>; | |
482 | ||
483 | pinctrl-names = "default"; | |
484 | pinctrl-0 = <&uart3_pins_default>; | |
485 | }; | |
486 | ||
a75dacf8 FB |
487 | &mac { |
488 | status = "okay"; | |
489 | pinctrl-names = "default", "sleep"; | |
490 | pinctrl-0 = <&cpsw_pins_default>; | |
491 | pinctrl-1 = <&cpsw_pins_sleep>; | |
492 | dual_emac; | |
493 | }; | |
494 | ||
495 | &cpsw_emac0 { | |
496 | phy_id = <&davinci_mdio>, <1>; | |
497 | phy-mode = "rgmii"; | |
498 | dual_emac_res_vlan = <1>; | |
499 | }; | |
500 | ||
501 | &cpsw_emac1 { | |
502 | phy_id = <&davinci_mdio>, <2>; | |
503 | phy-mode = "rgmii"; | |
504 | dual_emac_res_vlan = <2>; | |
505 | }; | |
506 | ||
507 | &davinci_mdio { | |
508 | pinctrl-names = "default", "sleep"; | |
509 | pinctrl-0 = <&davinci_mdio_pins_default>; | |
510 | pinctrl-1 = <&davinci_mdio_pins_sleep>; | |
511 | }; | |
512 | ||
5a0f93c6 NM |
513 | &mmc1 { |
514 | status = "okay"; | |
515 | ||
516 | pinctrl-names = "default"; | |
517 | pinctrl-0 = <&mmc1_pins_default>; | |
518 | ||
519 | vmmc-supply = <&ldo1_reg>; | |
520 | vmmc_aux-supply = <&vdd_3v3>; | |
521 | pbias-supply = <&pbias_mmc_reg>; | |
522 | bus-width = <4>; | |
523 | cd-gpios = <&gpio6 27 0>; /* gpio 219 */ | |
524 | }; | |
525 | ||
526 | &mmc2 { | |
527 | status = "okay"; | |
528 | ||
529 | pinctrl-names = "default"; | |
530 | pinctrl-0 = <&mmc2_pins_default>; | |
531 | ||
532 | vmmc-supply = <&vdd_3v3>; | |
533 | bus-width = <8>; | |
534 | ti,non-removable; | |
535 | cap-mmc-dual-data-rate; | |
536 | }; | |
537 | ||
538 | &sata { | |
539 | status = "okay"; | |
540 | }; | |
541 | ||
542 | &usb2_phy1 { | |
543 | phy-supply = <&ldousb_reg>; | |
544 | }; | |
545 | ||
546 | &usb1 { | |
547 | dr_mode = "host"; | |
548 | pinctrl-names = "default"; | |
549 | pinctrl-0 = <&usb1_pins>; | |
550 | }; | |
f60db98e | 551 | |
726806ad RQ |
552 | &usb2 { |
553 | dr_mode = "peripheral"; | |
554 | }; |