projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| ad8a15d9 JCPV |
1 | /* |
| 2 | * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards | |
| 3 | * | |
| 4 | * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | |
| 5 | * | |
| 6 | * Licensed under GPLv2 only. | |
| 7 | */ | |
| 8 | ||
| 9 | /dts-v1/; | |
| 6db64d29 | 10 | #include "at91sam9260.dtsi" |
| ad8a15d9 JCPV |
11 | |
| 12 | / { | |
| 13 | model = "Somfy Animeo IP"; | |
| 14 | compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; | |
| 15 | ||
| 16 | aliases { | |
| 17 | serial0 = &usart1; | |
| 18 | serial1 = &usart2; | |
| 19 | serial2 = &usart0; | |
| 20 | serial3 = &dbgu; | |
| 21 | serial4 = &usart3; | |
| 22 | serial5 = &uart0; | |
| 23 | serial6 = &uart1; | |
| 24 | }; | |
| 25 | ||
| 26 | chosen { | |
| 27 | linux,stdout-path = &usart2; | |
| 28 | }; | |
| 29 | ||
| 30 | memory { | |
| 31 | reg = <0x20000000 0x4000000>; | |
| 32 | }; | |
| 33 | ||
| 34 | clocks { | |
| 35 | #address-cells = <1>; | |
| 36 | #size-cells = <1>; | |
| 37 | ranges; | |
| 38 | ||
| 39 | main_clock: clock@0 { | |
| 40 | compatible = "atmel,osc", "fixed-clock"; | |
| 41 | clock-frequency = <18432000>; | |
| 42 | }; | |
| 650defcf AB |
43 | |
| 44 | slow_xtal { | |
| 45 | clock-frequency = <32768>; | |
| 46 | }; | |
| 47 | ||
| 48 | main_xtal { | |
| 49 | clock-frequency = <18432000>; | |
| 50 | }; | |
| ad8a15d9 JCPV |
51 | }; |
| 52 | ||
| 53 | ahb { | |
| 54 | apb { | |
| 55 | usart0: serial@fffb0000 { | |
| 56 | pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; | |
| 57 | linux,rs485-enabled-at-boot-time; | |
| 58 | status = "okay"; | |
| 59 | }; | |
| 60 | ||
| 61 | usart1: serial@fffb4000 { | |
| 62 | pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; | |
| 63 | linux,rs485-enabled-at-boot-time; | |
| 64 | status = "okay"; | |
| 65 | }; | |
| 66 | ||
| 67 | usart2: serial@fffb8000 { | |
| 68 | pinctrl-0 = <&pinctrl_usart2>; | |
| 69 | status = "okay"; | |
| 70 | }; | |
| 71 | ||
| 72 | macb0: ethernet@fffc4000 { | |
| 73 | pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; | |
| 74 | phy-mode = "mii"; | |
| 75 | status = "okay"; | |
| 76 | }; | |
| 301333bc JCPV |
77 | |
| 78 | mmc0: mmc@fffa8000 { | |
| 79 | pinctrl-0 = <&pinctrl_mmc0_clk | |
| 80 | &pinctrl_mmc0_slot1_cmd_dat0 | |
| 81 | &pinctrl_mmc0_slot1_dat1_3>; | |
| 82 | status = "okay"; | |
| 83 | ||
| 84 | slot@1 { | |
| 85 | reg = <1>; | |
| 86 | bus-width = <4>; | |
| 87 | }; | |
| 88 | }; | |
| a5618928 JCPV |
89 | |
| 90 | watchdog@fffffd40 { | |
| 91 | status = "okay"; | |
| 92 | }; | |
| ad8a15d9 JCPV |
93 | }; |
| 94 | ||
| 95 | nand0: nand@40000000 { | |
| 96 | nand-bus-width = <8>; | |
| 97 | nand-ecc-mode = "soft"; | |
| 98 | nand-on-flash-bbt; | |
| 99 | status = "okay"; | |
| 100 | ||
| 2f8e4582 | 101 | barebox@0 { |
| ad8a15d9 | 102 | label = "barebox"; |
| 2f8e4582 | 103 | reg = <0x0 0x58000>; |
| ad8a15d9 JCPV |
104 | }; |
| 105 | ||
| 2f8e4582 JCPV |
106 | u_boot_env@58000 { |
| 107 | label = "u_boot_env"; | |
| 108 | reg = <0x58000 0x8000>; | |
| ad8a15d9 JCPV |
109 | }; |
| 110 | ||
| 2f8e4582 JCPV |
111 | ubi@60000 { |
| 112 | label = "ubi"; | |
| 113 | reg = <0x60000 0x1FA0000>; | |
| ad8a15d9 JCPV |
114 | }; |
| 115 | }; | |
| 116 | ||
| 117 | usb0: ohci@00500000 { | |
| 118 | num-ports = <2>; | |
| 92f8629b | 119 | atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; |
| ad8a15d9 JCPV |
120 | status = "okay"; |
| 121 | }; | |
| 122 | }; | |
| 123 | ||
| 124 | leds { | |
| 125 | compatible = "gpio-leds"; | |
| 126 | ||
| 127 | power_green { | |
| 128 | label = "power_green"; | |
| 92f8629b | 129 | gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
130 | linux,default-trigger = "heartbeat"; |
| 131 | }; | |
| 132 | ||
| 133 | power_red { | |
| 134 | label = "power_red"; | |
| 92f8629b | 135 | gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
136 | }; |
| 137 | ||
| 138 | tx_green { | |
| 139 | label = "tx_green"; | |
| 92f8629b | 140 | gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
141 | }; |
| 142 | ||
| 143 | tx_red { | |
| 144 | label = "tx_red"; | |
| 92f8629b | 145 | gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
146 | }; |
| 147 | }; | |
| 148 | ||
| 149 | gpio_keys { | |
| 150 | compatible = "gpio-keys"; | |
| 151 | #address-cells = <1>; | |
| 152 | #size-cells = <0>; | |
| 153 | ||
| 154 | keyswitch_in { | |
| 155 | label = "keyswitch_in"; | |
| 92f8629b | 156 | gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
157 | linux,code = <28>; |
| 158 | gpio-key,wakeup; | |
| 159 | }; | |
| 160 | ||
| 161 | error_in { | |
| 162 | label = "error_in"; | |
| 92f8629b | 163 | gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
164 | linux,code = <29>; |
| 165 | gpio-key,wakeup; | |
| 166 | }; | |
| 167 | ||
| 168 | btn { | |
| 169 | label = "btn"; | |
| 92f8629b | 170 | gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; |
| ad8a15d9 JCPV |
171 | linux,code = <31>; |
| 172 | gpio-key,wakeup; | |
| 173 | }; | |
| 174 | }; | |
| 175 | }; |