Commit | Line | Data |
---|---|---|
2344a29a AE |
1 | /* |
2 | * Device Tree file for NETGEAR ReadyNAS 102 | |
3 | * | |
4 | * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or | |
7 | * modify it under the terms of the GNU General Public License | |
8 | * as published by the Free Software Foundation; either version | |
9 | * 2 of the License, or (at your option) any later version. | |
10 | */ | |
11 | ||
12 | /dts-v1/; | |
13 | ||
b8f18162 AE |
14 | #include <dt-bindings/input/input.h> |
15 | #include <dt-bindings/gpio/gpio.h> | |
3d0ed759 | 16 | #include "armada-370.dtsi" |
2344a29a AE |
17 | |
18 | / { | |
19 | model = "NETGEAR ReadyNAS 102"; | |
20 | compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp"; | |
21 | ||
22 | chosen { | |
23 | bootargs = "console=ttyS0,115200 earlyprintk"; | |
24 | }; | |
25 | ||
26 | memory { | |
27 | device_type = "memory"; | |
28 | reg = <0x00000000 0x20000000>; /* 512 MB */ | |
29 | }; | |
30 | ||
31 | soc { | |
b643f858 AE |
32 | ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 |
33 | MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; | |
34 | ||
35 | pcie-controller { | |
36 | status = "okay"; | |
37 | ||
38 | /* Connected to Marvell SATA controller */ | |
39 | pcie@1,0 { | |
40 | /* Port 0, Lane 0 */ | |
41 | status = "okay"; | |
42 | }; | |
43 | ||
44 | /* Connected to FL1009 USB 3.0 controller */ | |
45 | pcie@2,0 { | |
46 | /* Port 1, Lane 0 */ | |
47 | status = "okay"; | |
48 | }; | |
49 | }; | |
50 | ||
2344a29a AE |
51 | internal-regs { |
52 | serial@12000 { | |
2344a29a AE |
53 | status = "okay"; |
54 | }; | |
55 | ||
56 | sata@a0000 { | |
57 | nr-ports = <2>; | |
58 | status = "okay"; | |
59 | }; | |
60 | ||
61 | pinctrl { | |
62 | power_led_pin: power-led-pin { | |
63 | marvell,pins = "mpp57"; | |
64 | marvell,function = "gpio"; | |
65 | }; | |
ece19e2b | 66 | |
2344a29a AE |
67 | sata1_led_pin: sata1-led-pin { |
68 | marvell,pins = "mpp15"; | |
69 | marvell,function = "gpio"; | |
70 | }; | |
71 | ||
72 | sata2_led_pin: sata2-led-pin { | |
73 | marvell,pins = "mpp14"; | |
74 | marvell,function = "gpio"; | |
75 | }; | |
76 | ||
77 | backup_led_pin: backup-led-pin { | |
78 | marvell,pins = "mpp56"; | |
79 | marvell,function = "gpio"; | |
80 | }; | |
2832cf25 | 81 | |
b8f18162 AE |
82 | backup_button_pin: backup-button-pin { |
83 | marvell,pins = "mpp58"; | |
84 | marvell,function = "gpio"; | |
85 | }; | |
86 | ||
87 | power_button_pin: power-button-pin { | |
88 | marvell,pins = "mpp62"; | |
89 | marvell,function = "gpio"; | |
90 | }; | |
91 | ||
92 | reset_button_pin: reset-button-pin { | |
93 | marvell,pins = "mpp6"; | |
94 | marvell,function = "gpio"; | |
95 | }; | |
96 | ||
2832cf25 AE |
97 | poweroff: poweroff { |
98 | marvell,pins = "mpp8"; | |
99 | marvell,function = "gpio"; | |
100 | }; | |
2344a29a AE |
101 | }; |
102 | ||
103 | mdio { | |
b8f18162 | 104 | phy0: ethernet-phy@0 { /* Marvell 88E1318 */ |
2344a29a AE |
105 | reg = <0>; |
106 | }; | |
107 | }; | |
108 | ||
109 | ethernet@74000 { | |
110 | status = "okay"; | |
111 | phy = <&phy0>; | |
112 | phy-mode = "rgmii-id"; | |
113 | }; | |
114 | ||
115 | usb@50000 { | |
116 | status = "okay"; | |
117 | }; | |
118 | ||
119 | i2c@11000 { | |
120 | compatible = "marvell,mv64xxx-i2c"; | |
121 | clock-frequency = <100000>; | |
122 | status = "okay"; | |
123 | ||
49a9b0be AE |
124 | isl12057: isl12057@68 { |
125 | compatible = "isl,isl12057"; | |
126 | reg = <0x68>; | |
127 | }; | |
128 | ||
2344a29a AE |
129 | g762: g762@3e { |
130 | compatible = "gmt,g762"; | |
131 | reg = <0x3e>; | |
132 | clocks = <&g762_clk>; /* input clock */ | |
133 | fan_gear_mode = <0>; | |
134 | fan_startv = <1>; | |
135 | pwm_polarity = <0>; | |
136 | }; | |
137 | }; | |
92beaccd AE |
138 | |
139 | nand@d0000 { | |
140 | status = "okay"; | |
141 | num-cs = <1>; | |
142 | marvell,nand-keep-config; | |
143 | marvell,nand-enable-arbiter; | |
144 | nand-on-flash-bbt; | |
145 | ||
146 | partition@0 { | |
147 | label = "u-boot"; | |
148 | reg = <0x0000000 0x180000>; /* 1.5MB */ | |
149 | read-only; | |
150 | }; | |
151 | ||
152 | partition@180000 { | |
153 | label = "u-boot-env"; | |
154 | reg = <0x180000 0x20000>; /* 128KB */ | |
155 | read-only; | |
156 | }; | |
157 | ||
158 | partition@200000 { | |
159 | label = "uImage"; | |
160 | reg = <0x0200000 0x600000>; /* 6MB */ | |
161 | }; | |
162 | ||
163 | partition@800000 { | |
164 | label = "minirootfs"; | |
165 | reg = <0x0800000 0x400000>; /* 4MB */ | |
166 | }; | |
167 | ||
168 | /* Last MB is for the BBT, i.e. not writable */ | |
169 | partition@c00000 { | |
170 | label = "ubifs"; | |
171 | reg = <0x0c00000 0x7400000>; /* 116MB */ | |
172 | }; | |
173 | }; | |
2344a29a AE |
174 | }; |
175 | }; | |
176 | ||
177 | clocks { | |
b8f18162 | 178 | g762_clk: g762-oscillator { |
2344a29a AE |
179 | compatible = "fixed-clock"; |
180 | #clock-cells = <0>; | |
181 | clock-frequency = <8192>; | |
182 | }; | |
183 | }; | |
184 | ||
b8f18162 | 185 | gpio-leds { |
2344a29a | 186 | compatible = "gpio-leds"; |
b8f18162 AE |
187 | pinctrl-0 = <&power_led_pin |
188 | &sata1_led_pin | |
189 | &sata2_led_pin | |
190 | &backup_led_pin>; | |
2344a29a AE |
191 | pinctrl-names = "default"; |
192 | ||
b8f18162 | 193 | blue-power-led { |
2344a29a | 194 | label = "rn102:blue:pwr"; |
b8f18162 | 195 | gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
dcdf14c7 | 196 | default-state = "keep"; |
2344a29a AE |
197 | }; |
198 | ||
b8f18162 | 199 | green-sata1-led { |
2344a29a | 200 | label = "rn102:green:sata1"; |
b8f18162 | 201 | gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; |
2344a29a AE |
202 | default-state = "on"; |
203 | }; | |
204 | ||
b8f18162 | 205 | green-sata2-led { |
2344a29a | 206 | label = "rn102:green:sata2"; |
b8f18162 | 207 | gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; |
2344a29a AE |
208 | default-state = "on"; |
209 | }; | |
210 | ||
b8f18162 | 211 | green-backup-led { |
2344a29a | 212 | label = "rn102:green:backup"; |
b8f18162 | 213 | gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; |
2344a29a AE |
214 | default-state = "on"; |
215 | }; | |
216 | }; | |
217 | ||
b8f18162 | 218 | gpio-keys { |
2344a29a | 219 | compatible = "gpio-keys"; |
b8f18162 AE |
220 | pinctrl-0 = <&power_button_pin |
221 | &reset_button_pin | |
222 | &backup_button_pin>; | |
223 | pinctrl-names = "default"; | |
2344a29a | 224 | |
b8f18162 | 225 | power-button { |
2344a29a | 226 | label = "Power Button"; |
b8f18162 AE |
227 | linux,code = <KEY_POWER>; |
228 | gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; | |
2344a29a AE |
229 | }; |
230 | ||
b8f18162 | 231 | reset-button { |
2344a29a | 232 | label = "Reset Button"; |
b8f18162 AE |
233 | linux,code = <KEY_RESTART>; |
234 | gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; | |
2344a29a AE |
235 | }; |
236 | ||
b8f18162 | 237 | backup-button { |
2344a29a | 238 | label = "Backup Button"; |
b8f18162 AE |
239 | linux,code = <KEY_COPY>; |
240 | gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; | |
2344a29a AE |
241 | }; |
242 | }; | |
243 | ||
b8f18162 | 244 | gpio-poweroff { |
2832cf25 AE |
245 | compatible = "gpio-poweroff"; |
246 | pinctrl-0 = <&poweroff>; | |
247 | pinctrl-names = "default"; | |
b8f18162 | 248 | gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
2832cf25 | 249 | }; |
2344a29a | 250 | }; |