projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 49fe2ba3 NF |
1 | /* |
| 2 | * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board | |
| 3 | * | |
| 4 | * Copyright (C) 2011 Atmel, | |
| 5 | * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> | |
| 6 | * | |
| 7 | * Licensed under GPLv2 or later. | |
| 8 | */ | |
| 9 | /dts-v1/; | |
| 6db64d29 | 10 | #include "at91sam9g45.dtsi" |
| 66844c74 | 11 | #include <dt-bindings/pwm/pwm.h> |
| 49fe2ba3 NF |
12 | |
| 13 | / { | |
| 14 | model = "Atmel AT91SAM9M10G45-EK"; | |
| 15 | compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; | |
| 16 | ||
| 17 | chosen { | |
| aa070464 AB |
18 | bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2"; |
| 19 | stdout-path = "serial0:115200n8"; | |
| 49fe2ba3 NF |
20 | }; |
| 21 | ||
| dcce6ce8 | 22 | memory { |
| 49fe2ba3 NF |
23 | reg = <0x70000000 0x4000000>; |
| 24 | }; | |
| 25 | ||
| eb5e76ff JCPV |
26 | clocks { |
| 27 | #address-cells = <1>; | |
| 28 | #size-cells = <1>; | |
| 29 | ranges; | |
| 30 | ||
| 31 | main_clock: clock@0 { | |
| 32 | compatible = "atmel,osc", "fixed-clock"; | |
| 33 | clock-frequency = <12000000>; | |
| 34 | }; | |
| 4c67a131 AB |
35 | |
| 36 | slow_xtal { | |
| 37 | clock-frequency = <32768>; | |
| 38 | }; | |
| 39 | ||
| 40 | main_xtal { | |
| 41 | clock-frequency = <12000000>; | |
| 42 | }; | |
| eb5e76ff JCPV |
43 | }; |
| 44 | ||
| 49fe2ba3 NF |
45 | ahb { |
| 46 | apb { | |
| 47 | dbgu: serial@ffffee00 { | |
| 48 | status = "okay"; | |
| 49 | }; | |
| 50 | ||
| 51 | usart1: serial@fff90000 { | |
| c58c0c5a JCPV |
52 | pinctrl-0 = |
| 53 | <&pinctrl_usart1 | |
| 54 | &pinctrl_usart1_rts | |
| 55 | &pinctrl_usart1_cts>; | |
| 49fe2ba3 NF |
56 | status = "okay"; |
| 57 | }; | |
| 0d4f99d8 NF |
58 | |
| 59 | macb0: ethernet@fffbc000 { | |
| 60 | phy-mode = "rmii"; | |
| 61 | status = "okay"; | |
| 62 | }; | |
| fbc18715 LD |
63 | |
| 64 | i2c0: i2c@fff84000 { | |
| 65 | status = "okay"; | |
| 917cdc5f JW |
66 | ov2640: camera@30 { |
| 67 | compatible = "ovti,ov2640"; | |
| 68 | reg = <0x30>; | |
| 69 | pinctrl-names = "default"; | |
| 70 | pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; | |
| 71 | resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; | |
| 72 | pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; | |
| 73 | clocks = <&pck1>; | |
| 74 | clock-names = "xvclk"; | |
| 75 | assigned-clocks = <&pck1>; | |
| 76 | assigned-clock-rates = <25000000>; | |
| 77 | ||
| 78 | port { | |
| 79 | ov2640_0: endpoint { | |
| 80 | remote-endpoint = <&isi_0>; | |
| 81 | bus-width = <8>; | |
| 82 | }; | |
| 83 | }; | |
| 84 | }; | |
| fbc18715 LD |
85 | }; |
| 86 | ||
| 87 | i2c1: i2c@fff88000 { | |
| 88 | status = "okay"; | |
| 89 | }; | |
| 4134a455 | 90 | |
| c77bcef4 WY |
91 | watchdog@fffffd40 { |
| 92 | status = "okay"; | |
| 93 | }; | |
| 94 | ||
| 4134a455 | 95 | mmc0: mmc@fff80000 { |
| 199e2ede JCPV |
96 | pinctrl-0 = < |
| 97 | &pinctrl_board_mmc0 | |
| 98 | &pinctrl_mmc0_slot0_clk_cmd_dat0 | |
| 99 | &pinctrl_mmc0_slot0_dat1_3>; | |
| 4134a455 LD |
100 | status = "okay"; |
| 101 | slot@0 { | |
| 102 | reg = <0>; | |
| 103 | bus-width = <4>; | |
| 92f8629b | 104 | cd-gpios = <&pioD 10 GPIO_ACTIVE_HIGH>; |
| 4134a455 LD |
105 | }; |
| 106 | }; | |
| 107 | ||
| 108 | mmc1: mmc@fffd0000 { | |
| 199e2ede JCPV |
109 | pinctrl-0 = < |
| 110 | &pinctrl_board_mmc1 | |
| 111 | &pinctrl_mmc1_slot0_clk_cmd_dat0 | |
| 112 | &pinctrl_mmc1_slot0_dat1_3>; | |
| 4134a455 LD |
113 | status = "okay"; |
| 114 | slot@0 { | |
| 115 | reg = <0>; | |
| 116 | bus-width = <4>; | |
| 92f8629b JCPV |
117 | cd-gpios = <&pioD 11 GPIO_ACTIVE_HIGH>; |
| 118 | wp-gpios = <&pioD 29 GPIO_ACTIVE_HIGH>; | |
| 4134a455 LD |
119 | }; |
| 120 | }; | |
| 199e2ede JCPV |
121 | |
| 122 | pinctrl@fffff200 { | |
| 917cdc5f JW |
123 | camera_sensor { |
| 124 | pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { | |
| 125 | atmel,pins = | |
| 126 | <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; | |
| 127 | }; | |
| 128 | ||
| 129 | pinctrl_sensor_reset: sensor_reset-0 { | |
| 130 | atmel,pins = | |
| 131 | <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; | |
| 132 | }; | |
| 133 | ||
| 134 | pinctrl_sensor_power: sensor_power-0 { | |
| 135 | atmel,pins = | |
| 136 | <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; | |
| 137 | }; | |
| 138 | }; | |
| 199e2ede JCPV |
139 | mmc0 { |
| 140 | pinctrl_board_mmc0: mmc0-board { | |
| 141 | atmel,pins = | |
| c9d0f317 | 142 | <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD10 gpio CD pin pull up and deglitch */ |
| 199e2ede JCPV |
143 | }; |
| 144 | }; | |
| 145 | ||
| 146 | mmc1 { | |
| 147 | pinctrl_board_mmc1: mmc1-board { | |
| 148 | atmel,pins = | |
| c9d0f317 JCPV |
149 | <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* PD11 gpio CD pin pull up and deglitch */ |
| 150 | AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ | |
| 199e2ede JCPV |
151 | }; |
| 152 | }; | |
| eed97298 BS |
153 | |
| 154 | pwm0 { | |
| 155 | pinctrl_pwm_leds: pwm-led { | |
| 156 | atmel,pins = | |
| 157 | <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */ | |
| 158 | AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */ | |
| 159 | }; | |
| 160 | }; | |
| 199e2ede | 161 | }; |
| b6811e9a RG |
162 | |
| 163 | spi0: spi@fffa4000{ | |
| 164 | status = "okay"; | |
| 165 | cs-gpios = <&pioB 3 0>, <0>, <0>, <0>; | |
| 166 | mtd_dataflash@0 { | |
| 167 | compatible = "atmel,at45", "atmel,dataflash"; | |
| 168 | spi-max-frequency = <13000000>; | |
| 169 | reg = <0>; | |
| 170 | }; | |
| 171 | }; | |
| 24ce10e1 JCPV |
172 | |
| 173 | usb2: gadget@fff78000 { | |
| 174 | atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; | |
| 175 | status = "okay"; | |
| 176 | }; | |
| eed97298 | 177 | |
| e10a57e3 AB |
178 | adc0: adc@fffb0000 { |
| 179 | pinctrl-names = "default"; | |
| 180 | pinctrl-0 = < | |
| 181 | &pinctrl_adc0_ad0 | |
| 182 | &pinctrl_adc0_ad1 | |
| 183 | &pinctrl_adc0_ad2 | |
| 184 | &pinctrl_adc0_ad3 | |
| 185 | &pinctrl_adc0_ad4 | |
| 186 | &pinctrl_adc0_ad5 | |
| 187 | &pinctrl_adc0_ad6 | |
| 188 | &pinctrl_adc0_ad7>; | |
| 189 | atmel,adc-ts-wires = <4>; | |
| 190 | status = "okay"; | |
| 191 | }; | |
| 192 | ||
| 917cdc5f JW |
193 | isi@fffb4000 { |
| 194 | pinctrl-names = "default"; | |
| 195 | pinctrl-0 = <&pinctrl_isi_data_0_7>; | |
| 196 | status = "okay"; | |
| 197 | port { | |
| 198 | isi_0: endpoint { | |
| 199 | remote-endpoint = <&ov2640_0>; | |
| 200 | bus-width = <8>; | |
| bc81beb8 JW |
201 | vsync-active = <1>; |
| 202 | hsync-active = <1>; | |
| 917cdc5f JW |
203 | }; |
| 204 | }; | |
| 205 | }; | |
| 206 | ||
| eed97298 BS |
207 | pwm0: pwm@fffb8000 { |
| 208 | status = "okay"; | |
| 209 | ||
| 210 | pinctrl-names = "default"; | |
| 211 | pinctrl-0 = <&pinctrl_pwm_leds>; | |
| 212 | }; | |
| 4dd7933a | 213 | |
| 199ec7ab BB |
214 | rtc@fffffd20 { |
| 215 | atmel,rtt-rtc-time-reg = <&gpbr 0x0>; | |
| 216 | status = "okay"; | |
| 217 | }; | |
| 218 | ||
| 219 | gpbr: syscon@fffffd60 { | |
| 220 | status = "okay"; | |
| 221 | }; | |
| 222 | ||
| 4dd7933a EL |
223 | rtc@fffffdb0 { |
| 224 | status = "okay"; | |
| 225 | }; | |
| 49fe2ba3 | 226 | }; |
| d6a01661 | 227 | |
| f4390a79 JCPV |
228 | fb0: fb@0x00500000 { |
| 229 | display = <&display0>; | |
| 230 | status = "okay"; | |
| 231 | ||
| 232 | display0: display { | |
| 233 | bits-per-pixel = <32>; | |
| 234 | atmel,lcdcon-backlight; | |
| 235 | atmel,dmacon = <0x1>; | |
| 236 | atmel,lcdcon2 = <0x80008002>; | |
| 237 | atmel,guard-time = <9>; | |
| 238 | atmel,lcd-wiring-mode = "RGB"; | |
| 239 | ||
| 240 | display-timings { | |
| 241 | native-mode = <&timing0>; | |
| 242 | timing0: timing0 { | |
| 243 | clock-frequency = <9000000>; | |
| 244 | hactive = <480>; | |
| 245 | vactive = <272>; | |
| 246 | hback-porch = <1>; | |
| 247 | hfront-porch = <1>; | |
| 248 | vback-porch = <40>; | |
| 249 | vfront-porch = <1>; | |
| 250 | hsync-len = <45>; | |
| 251 | vsync-len = <1>; | |
| 252 | }; | |
| 253 | }; | |
| 254 | }; | |
| 255 | }; | |
| 256 | ||
| d6a01661 JCPV |
257 | nand0: nand@40000000 { |
| 258 | nand-bus-width = <8>; | |
| 259 | nand-ecc-mode = "soft"; | |
| 260 | nand-on-flash-bbt; | |
| 261 | status = "okay"; | |
| 262 | ||
| 263 | boot@0 { | |
| 264 | label = "bootstrap/uboot/kernel"; | |
| 265 | reg = <0x0 0x400000>; | |
| 266 | }; | |
| 267 | ||
| 268 | rootfs@400000 { | |
| 269 | label = "rootfs"; | |
| 270 | reg = <0x400000 0x3C00000>; | |
| 271 | }; | |
| 272 | ||
| 273 | data@4000000 { | |
| 274 | label = "data"; | |
| 275 | reg = <0x4000000 0xC000000>; | |
| 276 | }; | |
| 6a062459 | 277 | }; |
| d6a01661 | 278 | |
| 6a062459 JCPV |
279 | usb0: ohci@00700000 { |
| 280 | status = "okay"; | |
| 281 | num-ports = <2>; | |
| 92f8629b JCPV |
282 | atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW |
| 283 | &pioD 3 GPIO_ACTIVE_LOW>; | |
| d6a01661 | 284 | }; |
| 62c5553a JCPV |
285 | |
| 286 | usb1: ehci@00800000 { | |
| 287 | status = "okay"; | |
| 288 | }; | |
| 49fe2ba3 | 289 | }; |
| f2ee7acd JCPV |
290 | |
| 291 | leds { | |
| 292 | compatible = "gpio-leds"; | |
| 293 | ||
| 294 | d8 { | |
| 295 | label = "d8"; | |
| 92f8629b | 296 | gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; |
| f2ee7acd JCPV |
297 | linux,default-trigger = "heartbeat"; |
| 298 | }; | |
| eed97298 BS |
299 | }; |
| 300 | ||
| 301 | pwmleds { | |
| 302 | compatible = "pwm-leds"; | |
| f2ee7acd JCPV |
303 | |
| 304 | d6 { | |
| 305 | label = "d6"; | |
| 66844c74 | 306 | pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; |
| eed97298 | 307 | max-brightness = <255>; |
| f2ee7acd JCPV |
308 | linux,default-trigger = "nand-disk"; |
| 309 | }; | |
| 310 | ||
| 311 | d7 { | |
| 312 | label = "d7"; | |
| 66844c74 | 313 | pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; |
| eed97298 | 314 | max-brightness = <255>; |
| f2ee7acd JCPV |
315 | linux,default-trigger = "mmc0"; |
| 316 | }; | |
| 317 | }; | |
| 8a087b0c JCPV |
318 | |
| 319 | gpio_keys { | |
| 320 | compatible = "gpio-keys"; | |
| 8a087b0c JCPV |
321 | |
| 322 | left_click { | |
| 323 | label = "left_click"; | |
| 92f8629b | 324 | gpios = <&pioB 6 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
325 | linux,code = <272>; |
| 326 | gpio-key,wakeup; | |
| 327 | }; | |
| 328 | ||
| 329 | right_click { | |
| 330 | label = "right_click"; | |
| 92f8629b | 331 | gpios = <&pioB 7 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
332 | linux,code = <273>; |
| 333 | gpio-key,wakeup; | |
| 334 | }; | |
| 335 | ||
| 336 | left { | |
| 337 | label = "Joystick Left"; | |
| 92f8629b | 338 | gpios = <&pioB 14 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
339 | linux,code = <105>; |
| 340 | }; | |
| 341 | ||
| 342 | right { | |
| 343 | label = "Joystick Right"; | |
| 92f8629b | 344 | gpios = <&pioB 15 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
345 | linux,code = <106>; |
| 346 | }; | |
| 347 | ||
| 348 | up { | |
| 349 | label = "Joystick Up"; | |
| 92f8629b | 350 | gpios = <&pioB 16 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
351 | linux,code = <103>; |
| 352 | }; | |
| 353 | ||
| 354 | down { | |
| 355 | label = "Joystick Down"; | |
| 92f8629b | 356 | gpios = <&pioB 17 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
357 | linux,code = <108>; |
| 358 | }; | |
| 359 | ||
| 360 | enter { | |
| 361 | label = "Joystick Press"; | |
| 92f8629b | 362 | gpios = <&pioB 18 GPIO_ACTIVE_LOW>; |
| 8a087b0c JCPV |
363 | linux,code = <28>; |
| 364 | }; | |
| 365 | }; | |
| 49fe2ba3 | 366 | }; |