Commit | Line | Data |
---|---|---|
cce783c6 HX |
1 | /* |
2 | * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board | |
3 | * | |
4 | * Copyright (C) 2012 Atmel, | |
5 | * 2012 Hong Xu <hong.xu@atmel.com> | |
6 | * | |
7 | * Licensed under GPLv2 or later. | |
8 | */ | |
9 | /dts-v1/; | |
6db64d29 | 10 | #include "at91sam9n12.dtsi" |
cce783c6 HX |
11 | |
12 | / { | |
13 | model = "Atmel AT91SAM9N12-EK"; | |
14 | compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; | |
15 | ||
16 | chosen { | |
a57603ca | 17 | bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; |
cce783c6 HX |
18 | }; |
19 | ||
20 | memory { | |
a57603ca | 21 | reg = <0x20000000 0x8000000>; |
cce783c6 HX |
22 | }; |
23 | ||
24 | clocks { | |
25 | #address-cells = <1>; | |
26 | #size-cells = <1>; | |
27 | ranges; | |
28 | ||
29 | main_clock: clock@0 { | |
30 | compatible = "atmel,osc", "fixed-clock"; | |
31 | clock-frequency = <16000000>; | |
32 | }; | |
6503ab5f AB |
33 | |
34 | slow_xtal { | |
35 | clock-frequency = <32768>; | |
36 | }; | |
37 | ||
38 | main_xtal { | |
39 | clock-frequency = <16000000>; | |
40 | }; | |
cce783c6 HX |
41 | }; |
42 | ||
43 | ahb { | |
44 | apb { | |
45 | dbgu: serial@fffff200 { | |
46 | status = "okay"; | |
47 | }; | |
fbc18715 | 48 | |
47609066 BS |
49 | ssc0: ssc@f0010000 { |
50 | status = "okay"; | |
51 | }; | |
52 | ||
fbc18715 LD |
53 | i2c0: i2c@f8010000 { |
54 | status = "okay"; | |
82914f8d | 55 | |
e6f79916 BS |
56 | wm8904: codec@1a { |
57 | compatible = "wm8904"; | |
58 | reg = <0x1a>; | |
38324358 BS |
59 | clocks = <&pck0>; |
60 | clock-names = "mclk"; | |
e6f79916 BS |
61 | }; |
62 | ||
82914f8d | 63 | qt1070: keyboard@1b { |
64 | compatible = "qt1070"; | |
65 | reg = <0x1b>; | |
66 | interrupt-parent = <&pioA>; | |
67 | interrupts = <2 IRQ_TYPE_EDGE_FALLING>; | |
68 | pinctrl-names = "default"; | |
69 | pinctrl-0 = <&pinctrl_qt1070_irq>; | |
70 | }; | |
fbc18715 LD |
71 | }; |
72 | ||
73 | i2c1: i2c@f8014000 { | |
74 | status = "okay"; | |
75 | }; | |
4134a455 LD |
76 | |
77 | mmc0: mmc@f0008000 { | |
199e2ede JCPV |
78 | pinctrl-0 = < |
79 | &pinctrl_board_mmc0 | |
80 | &pinctrl_mmc0_slot0_clk_cmd_dat0 | |
81 | &pinctrl_mmc0_slot0_dat1_3>; | |
4134a455 LD |
82 | status = "okay"; |
83 | slot@0 { | |
84 | reg = <0>; | |
85 | bus-width = <4>; | |
92f8629b | 86 | cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>; |
4134a455 LD |
87 | }; |
88 | }; | |
199e2ede JCPV |
89 | |
90 | pinctrl@fffff400 { | |
91 | mmc0 { | |
92 | pinctrl_board_mmc0: mmc0-board { | |
93 | atmel,pins = | |
c9d0f317 | 94 | <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */ |
199e2ede JCPV |
95 | }; |
96 | }; | |
82914f8d | 97 | |
98 | qt1070 { | |
99 | pinctrl_qt1070_irq: qt1070_irq { | |
100 | atmel,pins = | |
101 | <AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; | |
102 | }; | |
103 | }; | |
551a409c BS |
104 | |
105 | sound { | |
106 | pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { | |
107 | atmel,pins = | |
108 | <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; | |
109 | }; | |
110 | }; | |
199e2ede | 111 | }; |
b6811e9a RG |
112 | |
113 | spi0: spi@f0000000 { | |
114 | status = "okay"; | |
115 | cs-gpios = <&pioA 14 0>, <0>, <0>, <0>; | |
116 | m25p80@0 { | |
117 | compatible = "atmel,at25df321a"; | |
118 | spi-max-frequency = <50000000>; | |
119 | reg = <0>; | |
120 | }; | |
121 | }; | |
c77bcef4 WY |
122 | |
123 | watchdog@fffffe40 { | |
124 | status = "okay"; | |
125 | }; | |
cce783c6 HX |
126 | }; |
127 | ||
128 | nand0: nand@40000000 { | |
129 | nand-bus-width = <8>; | |
c18c6b29 JW |
130 | nand-ecc-mode = "hw"; |
131 | atmel,has-pmecc; | |
132 | atmel,pmecc-cap = <2>; | |
133 | atmel,pmecc-sector-size = <512>; | |
cce783c6 HX |
134 | nand-on-flash-bbt; |
135 | status = "okay"; | |
136 | }; | |
d7e67ee8 BS |
137 | |
138 | usb0: ohci@00500000 { | |
2fbda374 BS |
139 | num-ports = <1>; |
140 | atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>; | |
d7e67ee8 BS |
141 | status = "okay"; |
142 | }; | |
cce783c6 HX |
143 | }; |
144 | ||
145 | leds { | |
146 | compatible = "gpio-leds"; | |
147 | ||
148 | d8 { | |
149 | label = "d8"; | |
92f8629b | 150 | gpios = <&pioB 4 GPIO_ACTIVE_LOW>; |
cce783c6 HX |
151 | linux,default-trigger = "mmc0"; |
152 | }; | |
153 | ||
154 | d9 { | |
155 | label = "d6"; | |
92f8629b | 156 | gpios = <&pioB 5 GPIO_ACTIVE_LOW>; |
cce783c6 HX |
157 | linux,default-trigger = "nand-disk"; |
158 | }; | |
159 | ||
160 | d10 { | |
161 | label = "d7"; | |
92f8629b | 162 | gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; |
cce783c6 HX |
163 | linux,default-trigger = "heartbeat"; |
164 | }; | |
165 | }; | |
166 | ||
167 | gpio_keys { | |
168 | compatible = "gpio-keys"; | |
cce783c6 HX |
169 | |
170 | enter { | |
171 | label = "Enter"; | |
f7042049 | 172 | gpios = <&pioB 3 GPIO_ACTIVE_LOW>; |
cce783c6 HX |
173 | linux,code = <28>; |
174 | gpio-key,wakeup; | |
175 | }; | |
176 | }; | |
551a409c BS |
177 | |
178 | sound { | |
179 | compatible = "atmel,asoc-wm8904"; | |
180 | pinctrl-names = "default"; | |
181 | pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; | |
182 | ||
183 | atmel,model = "wm8904 @ AT91SAM9N12"; | |
184 | atmel,audio-routing = | |
185 | "Headphone Jack", "HPOUTL", | |
186 | "Headphone Jack", "HPOUTR", | |
187 | "IN2L", "Line In Jack", | |
188 | "IN2R", "Line In Jack", | |
189 | "Mic", "MICBIAS", | |
190 | "IN1L", "Mic"; | |
191 | ||
192 | atmel,ssc-controller = <&ssc0>; | |
193 | atmel,audio-codec = <&wm8904>; | |
194 | }; | |
cce783c6 | 195 | }; |