Merge branch 'mkp-fixes' into fixes
[deliverable/linux.git] / arch / arm / boot / dts / at91sam9x5cm.dtsi
CommitLineData
467f1cf5
NF
1/*
2 * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
3 *
4 * Copyright (C) 2012 Atmel,
5 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
9
10/ {
dcce6ce8 11 memory {
467f1cf5
NF
12 reg = <0x20000000 0x8000000>;
13 };
f75622f4 14
eb5e76ff
JCPV
15 clocks {
16 #address-cells = <1>;
17 #size-cells = <1>;
18 ranges;
19
20 main_clock: clock@0 {
21 compatible = "atmel,osc", "fixed-clock";
22 clock-frequency = <12000000>;
23 };
24 };
25
12dde449
AB
26 clocks {
27 slow_xtal {
28 clock-frequency = <32768>;
29 };
0d04fca9 30
12dde449
AB
31 main_xtal {
32 clock-frequency = <12000000>;
33 };
0d04fca9
BB
34 };
35
86a89f4f 36 ahb {
6901d947
RG
37 apb {
38 pinctrl@fffff400 {
39 1wire_cm {
40 pinctrl_1wire_cm: 1wire_cm-0 {
c9d0f317 41 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
6901d947
RG
42 };
43 };
44 };
5934973d
NF
45
46 rtc@fffffeb0 {
47 status = "okay";
48 };
6901d947
RG
49 };
50
86a89f4f
JCPV
51 nand0: nand@40000000 {
52 nand-bus-width = <8>;
5314bc2d
JW
53 nand-ecc-mode = "hw";
54 atmel,has-pmecc; /* Enable PMECC */
55 atmel,pmecc-cap = <2>;
56 atmel,pmecc-sector-size = <512>;
86a89f4f
JCPV
57 nand-on-flash-bbt;
58 status = "okay";
59
60 at91bootstrap@0 {
61 label = "at91bootstrap";
62 reg = <0x0 0x40000>;
63 };
64
65 uboot@40000 {
66 label = "u-boot";
67 reg = <0x40000 0x80000>;
68 };
69
70 ubootenv@c0000 {
71 label = "U-Boot Env";
72 reg = <0xc0000 0x140000>;
73 };
74
75 kernel@200000 {
76 label = "kernel";
77 reg = <0x200000 0x600000>;
78 };
79
80 rootfs@800000 {
81 label = "rootfs";
82 reg = <0x800000 0x1f800000>;
83 };
84 };
85 };
86
f75622f4
JCPV
87 leds {
88 compatible = "gpio-leds";
89
90 pb18 {
91 label = "pb18";
92f8629b 92 gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
f75622f4
JCPV
93 linux,default-trigger = "heartbeat";
94 };
95
96 pd21 {
97 label = "pd21";
92f8629b 98 gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
f75622f4
JCPV
99 };
100 };
6901d947
RG
101
102 1wire_cm {
103 compatible = "w1-gpio";
92f8629b 104 gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
6901d947
RG
105 linux,open-drain;
106 pinctrl-names = "default";
107 pinctrl-0 = <&pinctrl_1wire_cm>;
108 status = "okay";
109 };
110
467f1cf5 111};
This page took 0.271247 seconds and 5 git commands to generate.