Commit | Line | Data |
---|---|---|
37078732 SH |
1 | /dts-v1/; |
2 | ||
3 | #include "dove.dtsi" | |
4 | ||
5 | / { | |
6 | model = "Globalscale D3Plug"; | |
7 | compatible = "globalscale,d3plug", "marvell,dove"; | |
8 | ||
9 | memory { | |
10 | device_type = "memory"; | |
11 | reg = <0x00000000 0x40000000>; | |
12 | }; | |
13 | ||
14 | chosen { | |
15 | bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; | |
16 | }; | |
17 | ||
18 | leds { | |
19 | compatible = "gpio-leds"; | |
20 | pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; | |
21 | pinctrl-names = "default"; | |
22 | ||
23 | wlan-act { | |
24 | label = "wlan-act"; | |
25 | gpios = <&gpio0 0 1>; | |
26 | }; | |
27 | ||
28 | wlan-ap { | |
29 | label = "wlan-ap"; | |
30 | gpios = <&gpio0 1 1>; | |
31 | }; | |
32 | ||
33 | status { | |
34 | label = "status"; | |
35 | gpios = <&gpio0 2 1>; | |
36 | }; | |
37 | }; | |
38 | ||
39 | regulators { | |
40 | compatible = "simple-bus"; | |
41 | #address-cells = <1>; | |
42 | #size-cells = <0>; | |
43 | ||
44 | usb_power: regulator@1 { | |
45 | compatible = "regulator-fixed"; | |
46 | reg = <1>; | |
47 | regulator-name = "USB Power"; | |
48 | regulator-min-microvolt = <5000000>; | |
49 | regulator-max-microvolt = <5000000>; | |
50 | enable-active-high; | |
51 | regulator-always-on; | |
52 | regulator-boot-on; | |
53 | gpio = <&gpio0 8 0>; | |
54 | pinctrl-0 = <&pmx_gpio_8>; | |
55 | pinctrl-names = "default"; | |
56 | }; | |
57 | }; | |
58 | }; | |
59 | ||
60 | &uart0 { status = "okay"; }; | |
61 | &sata0 { status = "okay"; }; | |
62 | &i2c0 { status = "okay"; }; | |
63 | ||
64 | /* Samsung M8G2F eMMC */ | |
65 | &sdio0 { | |
66 | status = "okay"; | |
67 | non-removable; | |
68 | bus-width = <4>; | |
69 | }; | |
70 | ||
71 | /* Marvell SD8787 WLAN/BT */ | |
72 | &sdio1 { | |
73 | status = "okay"; | |
74 | non-removable; | |
75 | }; | |
76 | ||
77 | &spi0 { | |
78 | status = "okay"; | |
79 | ||
80 | /* spi0.0: 2M Flash Macronix MX25L1605D */ | |
81 | spi-flash@0 { | |
82 | compatible = "st,m25l1605d"; | |
83 | spi-max-frequency = <86000000>; | |
84 | reg = <0>; | |
85 | }; | |
86 | }; | |
87 | ||
88 | &pcie { | |
89 | status = "okay"; | |
90 | /* Fresco Logic USB3.0 xHCI controller */ | |
91 | pcie-port@0 { | |
92 | status = "okay"; | |
93 | reset-gpios = <&gpio0 26 1>; | |
94 | reset-delay-us = <20000>; | |
95 | pinctrl-0 = <&pmx_camera_gpio>; | |
96 | pinctrl-names = "default"; | |
97 | }; | |
98 | /* Mini-PCIe slot */ | |
99 | pcie-port@1 { | |
100 | status = "okay"; | |
101 | reset-gpios = <&gpio0 25 1>; | |
102 | }; | |
103 | }; |